arXiv ScienceSearch

arXiv subjects

Daniel Hartwig

Publications and source records attributed to Daniel Hartwig.

3 recordsLinked to original sources

A centimeter-sized gas pressure sensor for high-vacuum measurements at cryogenic temperatures

Gas pressure sensors based on nanomechanical membranes have recently demonstrated an ultra-wide ten-decade measurement range, a gas-type-independent response, and a self-calibrating operation with uncertainties of approximately $1\,\%$. The readout relied on tabletop free-space laser interferometers. Here we present a centimeter-sized, portable implementation in which a square Si$_3$N$_4$ membrane is read out via a fiber-based laser interferometer. We perform pressure measurements between $5\times10^{-5}$ and $10^{-1}$~mbar in a confined $0.7$~L volume cooled to $78$~K. Because no suitable commercial pressure sensor exists for direct cryogenic comparison, we benchmark our device against room-temperature commercial gauges connected to the cold volume through a pipe of limited conductance. The measured relationship between the two sensors is compared with models accounting for temperature- and pumping-induced pressure gradients within the measurement chamber. These models agree with the measurements to within $<10\,\%$ for helium and $<13\,\%$ for nitrogen. The achieved readout sensitivity of $S_x = 8\times10^{-14}\,\mathrm{m}/\sqrt{\mathrm{Hz}}$ theoretically enables resolving the thermal displacement noise spectrum of a trampoline membrane at atmospheric pressure, with a peak response of $48\,S_x$ $\left(25\,S_x\right)$ at $295\,\mathrm{K}$ $\left(78\,\mathrm{K}\right)$. Our results suggest that the previously achieved pressure measurement range of ten decades with trampoline membranes is compatible with fiber-based optical readout. This paves the way for widely applicable pressure sensors in the centimeter size range in cryogenic environments.

physics.app-ph

Predicting the motion of a high-Q pendulum subject to seismic perturbations using machine learning

The seismically excited motion of high-Q pendula in gravitational-wave observatories sets a sensitivity limit to sub-audio gravitational-wave frequencies. Here, we report on the use of machine learning to predict the motion of a high-Q pendulum with a resonance frequency of 1.4Hz that is driven by natural seismic activity. We achieve a reduction of the displacement power spectral density of 40dB at the resonant frequency 1.4Hz and 6dB at 11Hz. Our result suggests that machine learning is able to significantly reduce seismically induced test mass motion in gravitational-wave detectors in combination with corrective feed-forward techniques.

gr-qc

Mechanical parametric feedback-cooling for pendulum-based gravity experiments

Gravitational forces that oscillate at audio-band frequencies are measured with masses suspended as pendulums that have resonance frequencies even lower. If the pendulum is excited by thermal energy or by seismic motion of the environment, the measurement sensitivity is reduced. Conventionally, this problem is mitigated by seismic isolation and linear damping, potentially combined with cryogenic cooling. Here, we propose mechanical parametric cooling of the pendulum motion during the gravitational field measurement. We report a proof of principle demonstration in the seismic noise dominated regime and achieve a damping factor of the pendulum motion of 5.7. We find a model system for which mechanical parametric feedback cooling reaches the quantum mechanical regime near the ground state. More feasible applications we anticipate in gravitational-wave detectors.

gr-qc