arXiv subjects

Daniel Bothner

Publications and source records attributed to Daniel Bothner.

At least 19 recordsLinked to original sources

arXiv2026

Dually tunable YBCO coplanar waveguide resonators based on helium-ion-generated Josephson inductances

Superconducting microwave circuits with and without Josephson inductances are the Swiss Army knife for many experiments and technologies from quantum information science to astrophysical particle detectors. Despite a large variety of existing circuit types, thin film materials and Josephson junction technologies, a flexible and reliable platform for high-magnetic-field and high-temperature applications is yet to be found. In this manuscript, we investigate coplanar waveguide cavities made of the high-temperature cuprate superconductor YBa$_2$Cu$_3$O$_7$ (YBCO), integrated with Josephson inductances and quantum interferometers that are generated by the controlled local irradiation of the YBCO with a focused helium ion beam. We obtain strongly flux-tunable microwave resonators, which not only display periodic interferometer oscillations of resonance frequency and decay rate, but also a superimposed Fraunhofer-like modulation pattern. The latter originates from the magnetic field tuning of the individual Josephson junction critical currents due to the out-of-plane junction barriers. It allows adjusting resonance frequency and flux responsivity independently of each other, potentially enabling tunable microwave circuits with low sensitivity to external magnetic-field noise over a broad range of frequencies. Finally, we investigate the temperature dependence of the cavities, show that they have promising characteristics up to 14$\,$K, and present a model for the junction-induced cavity losses.

quant-ph↗

arXiv2025

Tunable and nonlinearity-enhanced dispersive-plus-dissipative coupling in photon-pressure circuits

Photon-pressure circuits are the circuit implementation of the cavity optomechanical Hamiltonian and discussed for qubit readout, low-frequency quantum photonics and dark matter axion detection. Due to the enormous design flexibility of superconducting circuits, photon-pressure systems provide fascinating possibilities to explore unusual parameter regimes of the optomechanical Hamiltonian. Here, we report the realization of a photon-pressure platform, in which a GHz circuit interacts with a MHz circuit via a magnetic-flux-tunable combination of dispersive and dissipative photon-pressure. In addition, both coupling rates are considerably enhanced by nonlinearities of the GHz-mode, which leads to the multi-photon coupling rates scaling stronger with the pump photon number $n_\mathrm{c}$ than the usual $\sqrt{n_\mathrm{c}}$ dependence. We demonstrate that interference of the two interaction paths leads to a Fano-like response in photon-pressure induced transparency, and that the dynamical backaction is considerably modified compared to the dispersive case, including a parametric instability caused by a red-detuned pump tone.

quant-ph↗

arXiv2025

Magnetically induced Josephson nano-diodes in field-resilient superconducting microwave circuits

The development of nonlinear and frequency-tunable superconducting microwave circuits for operation in large magnetic fields is of high relevance for hybrid quantum systems such as spin resonance spectrometers, microwave quantum magnonics, dark matter axion detectors or flux-mediated optomechanics. With these exciting perspectives in mind, we investigate niobium-based circuits with integrated nano-constriction quantum interferometers in magnetic in-plane fields of up to several hundred mT. Our experiments reveal an unexpected and pronounced field-induced asymmetry in the bias-flux response of the circuits, which is demonstrated to originate from a field-induced Josephson-diode effect within the nano-constrictions and which enhances the circuit figures of merit in a magnetic field. An intuitive macroscopic Josephson-diode model attributes the effect to inhomogeneous constriction properties and provides us with the diode current-phase relation as a function of the in-plane field. Finally, we demonstrate that in the diode-state the circuit Kerr nonlinearity is bimodal in frequency, not only eliminating alternative explanations for the bias-flux-asymmetries but also being potentially useful for quantum circuit applications. Overall, our report underlines the potential of niobium nano-constriction circuits for high-field hybrid quantum systems, provides a conceptually simple explanation for the diode effect in superconducting nano-structures, and reveals the untapped potential of combining Josephson nano-diodes with microwave quantum circuits.

quant-ph↗

arXiv2024

A superconducting on-chip microwave cavity for tunable hybrid systems with optically trapped Rydberg atoms

Hybrid quantum systems are highly promising platforms for addressing important challenges of quantum information science and quantum sensing. Their implementation, however, is technologically non-trivial, since each component typically has unique experimental requirements. Here, we work towards a hybrid system consisting of a superconducting on-chip microwave circuit in a dilution refrigerator and optically trapped ultra-cold atoms. Specifically, we focus on the design optimization of a suitable superconducting chip and on the corresponding challenges and limitations. We unfold detailed microwave-cavity engineering strategies for maximized and tunable coupling rates to atomic Rydberg-Rydberg transitions in $\mathrm{^{87}Rb}$ atoms while respecting the boundary conditions due to the presence of a laser beam near the surface of the chip. Finally, we present an experimental implementation of the superconducting microwave chip and discuss the cavity characteristics as a function of temperature and applied dc voltage. Our results illuminate the required consideration aspects for a flexible, tunable superconductor-atom hybrid system, and lay the groundwork for realizing this exciting platform in a dilution refrigerator with vacuum Rabi frequencies approaching the strong-coupling regime.

quant-ph↗

arXiv2024

Extracting the current-phase-relation of a monolithic three-dimensional nano-constriction using a DC-current-tunable superconducting microwave cavity

Superconducting circuits with nonlinear elements such as Josephson tunnel junctions or kinetic inductance nanowires are the workhorse for microwave quantum and superconducting sensing technologies. For devices, which can be operated at high temperatures and large magnetic fields, nano-constrictions as nonlinear elements are recently under intense investigation. Constrictions, however, are far less understood than conventional Josephson tunnel junctions, and their current-phase-relationships (CPRs) -- although highly important for device design -- are hard to predict. Here, we present a niobium microwave cavity with a monolithically integrated, neon-ion-beam patterned three-dimensional (3D) nano-constriction. By design, we obtain a DC-current-tunable microwave circuit and characterize how the bias-current-dependent constriction properties impact the cavity resonance. Based on the results of these experiments, we reconstruct the CPR of the nanoconstriction. Finally, we discuss the Kerr nonlinearity of the device, a parameter important for many high-dynamic-range applications and an experimental probe for the second and third derivatives of the CPR. Our platform provides a useful method to comprehensively characterize nonlinear elements integrated in microwave circuits and could be of interest for current sensors, hybrid quantum systems and parametric amplifiers. Our findings furthermore contribute to a better understanding of nano-fabricated 3D constrictions.

cond-mat.mes-hall↗

arXiv2023

Niobium Quantum Interference Microwave Circuits with Monolithic Three-Dimensional (3D) Nanobridge Junctions

Nonlinear microwave circuits are key elements for many groundbreaking research directions and technologies, such as quantum computation and quantum sensing. The majority of microwave circuits with Josephson nonlinearities to date is based on aluminum thin films, and therefore they are severely restricted in their operation range regarding temperatures and external magnetic fields. Here, we present the realization of superconducting niobium microwave resonators with integrated, three-dimensional (3D) nanobridge-based superconducting quantum interference devices. The 3D nanobridges (constriction weak links) are monolithically patterned into pre-fabricated microwave LC circuits using neon ion beam milling, and the resulting quantum interference circuits show frequency tunabilities, flux responsivities and Kerr nonlinearities on par with comparable aluminum nanobridge devices, but with the perspective of a much larger operation parameter regime. Our results reveal great potential for application of these circuits in hybrid systems with e.g. magnons and spin ensembles or in flux-mediated optomechanics.

quant-ph↗

arXiv2022

Photon-Pressure with an Effective Negative Mass Microwave Mode

Harmonic oscillators belong to the most fundamental concepts in physics and are central to many current research fields such as circuit QED, cavity optomechanics and photon-pressure systems. Here, we engineer a microwave mode in a superconducting LC circuit that mimics the dynamics of a negative mass oscillator, and couple it via photon-pressure to a second low-frequency circuit. We demonstrate that the effective negative mass dynamics lead to an inversion of dynamical backaction and to sideband-cooling of the low-frequency circuit by a blue-detuned pump field, which can be intuitively understood by the inverted energy ladder of a negative mass oscillator.

quant-ph↗

arXiv2022

Parametrically enhanced interactions and non-trivial bath dynamics in a photon-pressure Kerr amplifier

Photon-pressure coupling between two superconducting circuits is a promising platform for investigating radiation-pressure coupling in novel parameter regimes and for the development of radio-frequency (RF) quantum photonics and quantum-limited RF sensing. So far, the intrinsic Josephson nonlinearity of photon-pressure coupled circuits has not been considered a potential resource for enhanced devices or novel experimental schemes. Here, we implement photon-pressure coupling between a RF circuit and a microwave cavity containing a superconducting quantum interference device (SQUID) which can be operated as a Josephson parametric amplifier (JPA). We demonstrate a Kerr-based enhancement of the photon-pressure single-photon coupling rate and an increase of the cooperativity by one order of magnitude in the amplifier regime. In addition, we characterize the upconverted and Kerr-amplified residual thermal fluctuations of the RF circuit, and observe that the intracavity amplification reduces the measurement imprecision. Finally, we demonstrate that RF mode sideband-cooling is surprisingly not limited to the effective amplifier mode temperature arising from quantum noise amplification, which we explain by non-trivial bath dynamics due to a two-stage amplification process. Our results demonstrate how Kerr nonlinearities and in particular Josephson parametric amplification can be utilized as resource for enhanced photon-pressure systems and Kerr cavity optomechanics.

quant-ph↗

arXiv2021

Cavity driven Rabi oscillations between Rydberg states of atoms trapped on a superconducting atom chip

Hybrid quantum systems involving cold atoms and microwave resonators can enable cavity-mediated infinite-range interactions between atomic spin systems and realize atomic quantum memories and transducers for microwave to optical conversion. To achieve strong coupling of atoms to on-chip microwave resonators, it was suggested to use atomic Rydberg states with strong electric dipole transitions. Here we report on the realization of coherent coupling of a Rydberg transition of ultracold atoms trapped on an integrated superconducting atom chip to the microwave field of an on-chip coplanar waveguide resonator. We observe and characterize the cavity driven Rabi oscillations between a pair of Rydberg states of atoms in an inhomogeneous electric field near the chip surface. Our studies demonstrate the feasibility, but also reveal the challenges, of coherent state manipulation of Rydberg atoms interacting with superconducting circuits.

quant-ph↗

arXiv2021

Apparent nonlinear damping triggered by quantum fluctuations

Nonlinear damping, the change in damping rate with the amplitude of oscillations plays an important role in many electrical, mechanical and even biological oscillators. In novel technologies such as carbon nanotubes, graphene membranes or superconducting resonators, the origin of nonlinear damping is sometimes unclear. This presents a problem, as the damping rate is a key figure of merit in the application of these systems to extremely precise sensors or quantum computers. Through measurements of a superconducting resonator, we show that from the interplay of quantum fluctuations and the nonlinearity of a Josephson junction emerges a power-dependence in the resonator response which closely resembles nonlinear damping. The phenomenon can be understood and visualized through the flow of quasi-probability in phase space where it reveals itself as dephasing. Crucially, the effect is not restricted to superconducting circuits: we expect that quantum fluctuations or other sources of noise give rise to apparent nonlinear damping in systems with a similar conservative nonlinearity, such as nano-mechanical oscillators or even macroscopic systems.

quant-ph↗

arXiv2021

Four-wave-cooling to the single phonon level in Kerr optomechanics

The field of cavity optomechanics has achieved groundbreaking photonic control and detection of mechanical oscillators, based on their coupling to linear electromagnetic modes. Lately, however, there is an uprising interest in exploring cavity nonlinearities as a powerful new resource in radiation-pressure interacting systems. Here, we present a flux-mediated optomechanical device combining a nonlinear Josephson-based superconducting quantum interference cavity with a mechanical nanobeam. We demonstrate how the intrinsic Kerr nonlinearity of the microwave circuit can be used for a counter-intuitive blue-detuned sideband-cooling scheme based on multi-tone cavity driving and intracavity four-wave-mixing. Based on the large single-photon coupling rate of the system of up to $g_0 = 2\pi\cdot 3.6\,$kHz and a high mechanical quality factor $Q_\mathrm{m} \approx 4\cdot 10^{5}$, we achieve an effective four-wave cooperativity of $\mathcal{C}_\mathrm{fw} > 100$ and demonstrate four-wave cooling of the mechanical oscillator close to its quantum groundstate, achieving a final occupancy of $n_\mathrm{m} \sim 1.6$. Our results significantly advance the recently developed platform of flux-mediated optomechanics and demonstrate how cavity Kerr nonlinearities can be utilized for novel control schemes in cavity optomechanics.

quant-ph↗

arXiv2020

Current detection using a Josephson parametric upconverter

We present the design, measurement and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity. Terminating a coplanar waveguide with a nanobridge constriction Josephson junction, we observe modulation sidebands from the cavity that enable highly sensitive, frequency-multiplexed output of small currents for applications such as transition-edge sensor array readout. We derive an analytical model to reproduce the measurements over a wide range of bias currents, detunings and input powers. Tuning the frequency of the cavity by more than \SI{100}{\mega\hertz} with DC current, our device achieves a minimum current sensitivity of \SI{8.9}{\pico\ampere\per\sqrt{\hertz}}. Extrapolating the results of our analytical model, we predict an improved device based on our platform, capable of achieving sensitivities down to \SI{50}{\femto\ampere\per\sqrt{\hertz}}}, or even lower if one could take advantage of parametric amplification in the Josephson cavity. Taking advantage of the Josephson architecture, our approach can provide higher sensitivity than kinetic inductance designs, and potentially enables detection of currents ultimately limited by quantum noise.

cond-mat.mes-hall↗

arXiv2019

Cavity electromechanics with parametric mechanical driving

Microwave optomechanical circuits have been demonstrated in the past years to be extremely powerfool tools for both, exploring fundamental physics of macroscopic mechanical oscillators as well as being promising candidates for novel on-chip quantum limited microwave devices. In most experiments so far, the mechanical oscillator is either used as a passive device element and its displacement is detected using the superconducting cavity or manipulated by intracavity fields. Here, we explore the possibility to directly and parametrically manipulate the mechanical nanobeam resonator of a cavity electromechanical system, which provides additional functionality to the toolbox of microwave optomechanical devices. In addition to using the cavity as an interferometer to detect parametrically modulated mechanical displacement and squeezed thermomechanical motion, we demonstrate that parametric modulation of the nanobeam resonance frequency can realize a phase-sensitive parametric amplifier for intracavity microwave photons. In contrast to many other microwave amplification schemes using electromechanical circuits, the presented technique allows for simultaneous cooling of the mechanical element, which potentially enables this type of optomechanical microwave amplifier to be quantum-limited.

cond-mat.mes-hall↗

arXiv2018

Optomechanical microwave amplification without mechanical amplification

High-gain and low-noise signal amplification is a valuable tool in various cryogenic microwave experiments. A microwave optomechanical device, in which a vibrating capacitor modulates the frequency of a microwave cavity, is one technique that is able to amplify microwave signals with high gain and large dynamical range. Such optomechanical amplifiers typically rely on strong backaction of microwave photons on the mechanical mode achieved in the sideband-resolved limit of optomechanics. Here, we observe microwave amplification in an optomechanical cavity in the extremely unresolved sideband limit. A large gain is observed for any detuning of the single pump tone within the cavity linewidth, a clear indication that the amplification is not induced by dynamical backaction. By being able to amplify for any detuning of the pump signal, the amplification center frequency can be tuned over the entire range of the broad cavity linewidth. Additionally, by providing microwave amplification without mechanical amplification, we predict that using this scheme it is possible to achieve near-quantum-limited microwave amplification despite a large thermal occupation of the mechanical mode.

cond-mat.mes-hall↗

arXiv2018

Bimodal Phase Diagram of the Superfluid Density in LaAlO3/SrTiO3 Revealed by an Interfacial Waveguide Resonator

We explore the superconducting phase diagram of the two-dimensional electron system at the LaAlO3/SrTiO3 interface by monitoring the frequencies of the cavity modes of a coplanar waveguide resonator fabricated in the interface itself. We determine the phase diagram of the superconducting transition as a function of temperature and electrostatic gating, finding that both the superfluid density and the transition temperature follow a dome shape, but that the two are not monotonically related. The ground state of this 2DES is interpreted as a Josephson junction array, where a transition from long- to short-range order occurs as a function of the electronic doping. The synergy between correlated oxides and superconducting circuits is revealed to be a promising route to investigate these exotic compounds, complementary to standard magneto-transport measurements.

cond-mat.str-el↗

arXiv2018

Superconducting coplanar microwave resonators with operating frequencies up to 50 GHz

We demonstrate the operation of superconducting coplanar microwave resonators in a very large frequency range up to 50 GHz. The resonators are fabricated from niobium thin films on sapphire substrates and optimized for these high frequencies by small chip sizes. We study numerous harmonics of the resonators at temperatures between 1.5 K and 6 K, and we determine quality factors of up to 25000 at 1.5 K. As an example for spectroscopy applications of such resonators we detect the superconducting transition of a bulk tin sample at multiple probing frequencies.

cond-mat.supr-con↗

arXiv2018

Tunable superconducting two-chip lumped element resonator

We have fabricated and investigated a stacked two-chip device, consisting of a lumped element resonator on one chip, which is side-coupled to a coplanar waveguide transmission line on a second chip. We present a full model to predict the behavior of the device dependent on the position of the lumped element resonator with respect to the transmission line. We identify different regimes, in which the device can be operated. One of them can be used to tune the coupling between the two subsystems. Another regime enables frequency tunability of the device, without leaving the over-coupled limit for internal quality factors of about $10^4$, while in the last regime the resonator properties are insensitive against small variations of the position. Finally, we have measured the transmission characteristics of the resonator for different positions, demonstrating a good agreement with the model.

cond-mat.supr-con↗

arXiv2017

Angle-dependent electron spin resonance of YbRh$_2$Si$_2$ measured with planar microwave resonators and in-situ rotation

We present a new experimental approach to investigate the magnetic properties of the anisotropic heavy-fermion system YbRh$_2$Si$_2$ as a function of crystallographic orientation. Angle-dependent electron spin resonance (ESR) measurements are performed at a low temperature of 1.6 K and at an ESR frequency of 4.4 GHz utilizing a superconducting planar microwave resonator in a $^4$He-cryostat in combination with in-situ sample rotation. The obtained ESR g-factor of YbRh$_2$Si$_2$ as a function of the crystallographic angle is consistent with results of previous measurements using conventional ESR spectrometers at higher frequencies and fields. Perspectives to implement this experimental approach into a dilution refrigerator and to reach the magnetically ordered phase of YbRh$_2$Si$_2$ are discussed.

cond-mat.str-el↗