arXiv subjects

Daniel Baker

Publications and source records attributed to Daniel Baker.

At least 19 recordsLinked to original sources

arXiv2026

Probing AU-Scale Magnetic-Field Reversals in the Interstellar Medium with Pulsar Scintillation

AU-scale structures in the interstellar medium have become relevant across several areas of astrophysics, from ISM microphysics to pulsar timing arrays and cosmic-ray (CR) propagation. Current sheets formed at magnetic-field reversals have drawn particular attention because they can deflect the dominant GeV CR population through large angles. Pulsar scintillation, an outstanding probe of plasma density, resolves these structures---but not their magnetic configuration. Conventional Faraday rotation measures (RM) are only marginally sensitive at AU scales and are further compromised by ionospheric systematics. We propose a method that isolates birefringence-induced polarization---the signature of magnetic reversal---by applying phase retrieval to polarized data. Pulsar scintillation further resolves ray paths separated by $\sim 1\,\rm{AU}$, enabling differential RM measurements that suppress the ionospheric common mode while preserving the AU-scale magnetic signal. We demonstrate the method on an archival observation of PSR B0834+06. Phase retrieval resolves the 1-ms scattering feature into two branches in Doppler-delay space. Under the corrugated current-sheet interpretation, these branches correspond to ray paths sampling opposite sides of an AU-scale current sheet. We measure a branch-to-branch RM difference of $(-9.3\pm3.2)\times 10^{-3}\text{ rad m}^{-2}$ at 2.9$\sigma$ across a 10-MHz band. The signal is consistent with a field reversal of $|\Delta\langle B_\parallel \rangle| \simeq4.4\pm2.1\,\mu\rm G$, sufficient to sustain a long-lived sheet. With only six independent subbands, we present this as a proof of concept rather than a definitive detection. If it proves scalable, its full implementation could constrain cosmic-ray transport and inform models of propagation-induced noise in pulsar timing arrays.

astro-ph.HE↗

arXiv2025

Back-End System of BURSTT

The Bustling Universe Radio Survey Telescope in Taiwan (BURSTT) is a new-generation wide-angle radio telescope specifically designed to survey Fast Radio Bursts (FRBs), energetic millisecond-duration pulses of unknown extragalactic origin. To realize its scientific potential, which includes detecting approximately 50 FRBs per year and sub-arcsecond localization capability, the system is designed to perform real-time beamforming and pulse search over the \SI{60}{\degree} $\times$ \SI{120}{\degree} field of view. This paper provides a detailed account of the design, implementation, and performance validation of the BURSTT back-end System. The system employs an efficient multi-stage processing architecture: initial beamforming is executed on the Xilinx ZCU216 RF System-on-Chip (RFSoC) platform; data is then transferred to Intel Xeon servers, where AVX-512 and AMX instruction sets are utilized for the second stage of beamforming and channelization, achieving high computational efficiency to ensure real-time capability. A highly optimized \texttt{bonsai} de-dispersion algorithm performs a real-time pulse search and triggering across 256 beams, which, upon detection, issues commands to the distributed outrigger system to save voltage data for very-long baseline interferometry (VLBI) precise localization. System performance has been validated through beamforming tests using bright radio sources and real-time detection of known pulsars, confirming the high fidelity of the signal processing pipeline.

astro-ph.IM↗

arXiv2025

Impossible Cloud Network: A Decentralized Internet Infrastructure Layer

The internet faces a sovereignty crisis due to power concentration and data growth among a few hyperscalers, leading to centralization and loss of user control. This consolidation risks censorship and creates single points of failure. While Web3 offers decentralized solutions, they often sacrifice either scalability, decentralization, or security, which are key elements in the blockchain trilemma. These solutions also struggle with limited access to enterprise-grade hardware and frequently rely on centralized infrastructure. The Impossible Cloud Network (ICN) addresses these issues by creating a multi-tiered, decentralized infrastructure layer. ICN offers a composable service layer, an enterprise-grade hardware resource layer, and a transparent, permissionless HyperNode network for performance enforcement. By strategically decoupling and decentralizing each layer, ICN aims to provide an open, extensively scalable infrastructure that ensures digital sovereignty, eliminates single points of trust, enables service programmability, and offers a decoupled architecture for limitless possibilities in the future internet.

cs.NI↗

arXiv2025

Single Epoch Measurements of Dispersion Measure Gradients Towards PSR B0834+06

Understanding the evolution of pulsar dispersion measures is vital to high precision timing experiments, as well as astrometric experiments to determine pulsar positions and proper motions. In this work, we present a novel approach to measuring dispersion measure gradients using pulsar scintillometry. This approach makes use of the multipath propagation through the interstellar medium to simultaneously probe dispersion measures along multiple sight lines from a single observation. Using existing data of PSR B0834+06, we are able to measure gradients of $9.7\pm0.3\times10^{-6}~\rm{pc}~\rm{cm}^{-3}~\rm{mas}^{-1}$.

astro-ph.HE↗

arXiv2025

Autonomy at Levels for Spacecraft

Autonomy at Levels is the idea that autonomy should be embedded within and throughout a spacecraft. Using Systems Engineering methods a spacecraft is typically decomposed into systems, subsystems, assemblies, components, and so on. All these decomposition levels within all the spacecraft's systems, could and should have autonomy elements built in. As a result, the "autonomy system" is made of autonomy elements or units that are integrated, distributed and embedded within the whole spacecraft. This is like how the power system would be designed and implemented. Linking control loops and autonomy loops illustrates how to achieve Autonomy at Levels.

eess.SY↗

arXiv2025

Unraveling the Potential of Diffusion Models in Small Molecule Generation

Generative AI presents chemists with novel ideas for drug design and facilitates the exploration of vast chemical spaces. Diffusion models (DMs), an emerging tool, have recently attracted great attention in drug R\&D. This paper comprehensively reviews the latest advancements and applications of DMs in molecular generation. It begins by introducing the theoretical principles of DMs. Subsequently, it categorizes various DM-based molecular generation methods according to their mathematical and chemical applications. The review further examines the performance of these models on benchmark datasets, with a particular focus on comparing the generation performance of existing 3D methods. Finally, it concludes by emphasizing current challenges and suggesting future research directions to fully exploit the potential of DMs in drug discovery.

q-bio.BM↗

arXiv2025

Spacecraft Autonomy Levels

As autonomous systems are being developed in multiple industries it has been recognized that a phased approach is needed both for technical development and user acceptance. Partially in response, the automotive and aircraft industries have published five or six Levels of Autonomy in an attempt to broadly characterize the amount of autonomy technology that is present in any particular vehicle. We propose six Spacecraft Autonomy Levels to characterize and describe the high-level autonomous capabilities for any given satellite. Our proposed spacecraft autonomy levels parallel those of the automotive and aircraft levels in an attempt to maintain consistency and a common understanding. We see these autonomy levels as useful in education and communication with lawmakers, government officials, and the general public.

eess.SY↗

arXiv2025

Levels of Spacecraft Autonomy

As autonomous systems are being developed in multiple industries it has been recognized that a phased approach is needed both for technical development and user acceptance. Partially in response, the automotive and aircraft industries have published five or six Levels of Autonomy in an attempt to broadly characterize the amount of autonomy technology that is present in any particular vehicle. We have developed a similar six Levels of Spacecraft Autonomy for similar purposes. Here, we propose extending these ideas to spacecraft constellations, clusters, swarms, ground stations for spacecraft, and strategic collaboration among space and ground assets. We intend these levels of autonomy to be used to characterize and describe high-level capabilities for any given satellite for education and communication with lawmakers, government officials, and the general public. All of the proposed levels mimic those of the automotive and aircraft levels in an attempt to maintain consistency and a common understanding with our intended audiences.

eess.SY↗

arXiv2024

Transient Blurring of the Scintillation Arc of Pulsar B1737+13

For many pulsars, the scattering structures responsible for scintillation are typically dominated by a single, thin screen along the line of sight, which persists for years or decades. In recent years, an increasing number of doubly-lensed events have been observed, where a secondary lens crosses the line of sight. This causes additional or distorted scintillation arcs over time scales ranging from days to months. In this work we report such a transient event for pulsar B1737+13 and propose a possible lensing geometry including the distance to both lenses, and the orientation of the main screen. Using phase retrieval techniques to separate the two lenses in the wavefield, we report a curvature and rate of motion of features associated with the secondary lens as it passed through the line of sight. By fitting the annual variation of the curvature, we report a possible distance and orientation for the main screen. The distance of the secondary lens is found by mapping the secondary feature onto the sky and tracking its position over time for different distances. We validate this method using B0834+06, for which the screen solutions are known through VLBI, and successfully recover the correct solution for the secondary feature. With the identified lensing geometry, we are able to estimate the size of the secondary lens, 1 - 3 au. Although this an appropriate size for a structure that could cause an extreme scattering event, we do not have conclusive evidence for or against that possibility.

astro-ph.GA↗

arXiv2023

Scintillated microlensing: measuring cosmic distances with fast radio bursts

We propose a novel means of directly measuring cosmological distances using scintillated microlensing of fast radio bursts (FRBs). In standard strong lensing measurements of cosmic expansion, the main source of systematic uncertainty lies in modeling the mass profile of galactic halos. Using extra-galactic stellar microlensing to measure the Hubble constant avoids this systematic uncertainty as the lens potential of microlenses depends only on a single parameter: the mass of the lens. FRBs, which may achieve nanosecond precision on lensing time delays, are well-suited to precision measurements of stellar microlensing, for which the time delays are on the order of milliseconds. However, typical angular separations between the microlensed images on the order of microarcseconds make the individual images impossible to spatially resolve with ground-based telescopes. We propose leveraging scintillation in the ISM to resolve the microlensed images, effectively turning the ISM into an astrophysical-scale interferometer. Using this technique, we estimate a 6\% uncertainty on $H_0$ from a single observed scintillated microlensing event, with a sub-percent uncertainty on $H_0$ achievable with only 30 such events. With an optical depth for stellar microlensing of $10^{-3}$, this may be achievable in the near future with upcoming FRB telescopes.

astro-ph.IM↗

arXiv2023

Data-based optimal estimation of frequency bias: The case of Southwest Power Pool

In this paper, we introduce a method to optimally estimate time-varying frequency bias. Current industry practice is to assume that frequency bias is changing only on annual basis. We suggest that this improved time-dependent bias estimate can be used to reduce the cost of frequency regulation needed to meet industry standards requested by the North American Electric Reliability Corporation (NERC). Optimization of time-varying frequency bias is posed as a parameter estimation (calibration) problem whose implementation utilizes online system measurements. It is further shown how this result can be used to estimate intra-dispatch load deviations. This knowledge is needed to estimate more accurately regulation reserve needed, and to therefore reduce overall regulation cost. Methods can be introduced to give incentives to demand response to participate in frequency regulation. Overall, we show the importance of incorporating knowledge of physics-based models for data-enabled parameter estimation of physical systems.

eess.SY↗

arXiv2023

On the cusp of cusps: a universal model for extreme scattering events in the ISM

The scattering structures in the ISM responsible for so-called ``extreme scattering events" (ESEs), observed in quasars and pulsars, remain enigmatic. Current models struggle to explain the high-frequency light curves of ESEs, and a recent analysis of a double lensing event in PSR\,B0834+06 reveals features of ESEs that may also be challenging to accommodate via existing models. We propose that these features arise naturally when the lens has a cusp-like profile, described by the elementary $A_3$ cusp catastrophe. This is an extension of previous work describing pulsar scintillation as arising from $A_2$ fold catastrophes in thin, corrugated plasma sheets along the line of sight. We call this framework of describing the lens potentials via elementary catastrophes ``doubly catastrophic lensing", as catastrophes (e.g. folds and cusps) have long been used to describe universal features in the light curves of lensing events that generically manifest, regardless of the precise details of the lens. Here, we argue that the lenses themselves may be described by these same elementary structures. If correct, the doubly catastrophic lensing framework would provide a unified description of scintillation and ESEs, where the lenses responsible for these scattering phenomena are universal and can be fully described by a small number of unfolding parameters. This could enable their application as giant cosmic lenses for precision measurements of coherent sources, including FRBs and pulsars.

astro-ph.HE↗

arXiv2022

High Resolution VLBI Astrometry of pulsar scintillation screens with the $\theta-\theta$ Transform

The recent development of $\theta\mhyphen\theta$ techniques in pulsar scintillometry has opened the door for new high resolution imaging techniques of the scattering medium. By solving the phase retrieval problem and recovering the wavefield from a pulsar dynamic spectrum, the Doppler shift, time delay, and phase offset of individual images can be determined. However, the results of phase retrieval from a single dish are only known up to a constant phase rotation, which introduces extra parameters when doing astrometry using Very Long Baseline Interferometry. We present an extension to previous $\theta\mhyphen\theta$ methods using the interferometric visibilities between multiple stations to calibrate the wavefields. When applied to existing data for PSR B0834+06 we measure the effective screen distance and lens orientation with five times greater precision than previous works.

astro-ph.IM↗

arXiv2022

Pulsar Double-lensing Sheds Light on the Origin of Extreme Scattering Events

In extreme scattering events, the brightness of a compact radio source drops significantly, as light is refracted out of the line of sight by foreground plasma lenses. Despite recent efforts, the nature of these lenses has remained a puzzle, because any roughly round lens would be so highly overpressurized relative to the interstellar medium that it could only exist for about a year. This, combined with a lack of constraints on distances and velocities, has led to a plethora of theoretical models. We present observations of a dramatic double-lensing event in pulsar PSR~B0834+06 and use a novel phase-retrieval technique to show that the data can be reproduced remarkably well with a two-screen model: one screen with many small lenses and another with a single, strong one. We further show that the latter lens is so strong that it would inevitably cause extreme scattering events. Our observations show that the lens moves slowly and is highly elongated on the sky. If similarly elongated along the line of sight, as would arise naturally from a sheet of plasma viewed nearly edge-on, no large over-pressure is required and hence the lens could be long-lived. Our new technique opens up the possibility of probing interstellar plasma structures in detail, leading to understanding crucial for high-precision pulsar timing and the subsequent detection of gravitational waves.

astro-ph.HE↗

arXiv2021

Localizing FRBs through VLBI with the Algonquin Radio Observatory 10-m Telescope

The CHIME/FRB experiment has detected thousands of Fast Radio Bursts (FRBs) due to its sensitivity and wide field of view; however, its low angular resolution prevents it from localizing events to their host galaxies. Very Long Baseline Interferometry (VLBI), triggered by FRB detections from CHIME/FRB will solve the challenge of localization for non-repeating events. Using a refurbished 10-m radio dish at the Algonquin Radio Observatory located in Ontario Canada, we developed a testbed for a VLBI experiment with a theoretical ~<30 masec precision. We provide an overview of the 10-m system and describe its refurbishment, the data acquisition, and a procedure for fringe fitting that simultaneously estimates the geometric delay used for localization and the dispersive delay from the ionosphere. Using single pulses from the Crab pulsar, we validate the system and localization procedure, and analyze the clock stability between sites, which is critical for phase-referencing an FRB event. We find a localization of 50 masec is possible with the performance of the current system. Furthermore, for sources with insufficient signal or restricted wideband to simultaneously measure both geometric and ionospheric delays, we show that the differential ionospheric contribution between the two sites must be measured to a precision of 1e-8 pc/cc to provide a reasonable localization from a detection in the 400--800 MHz band. Finally we show detection of an FRB observed simultaneously in the CHIME and the Algonquin 10-m telescope, the first FRB cross-correlated in this very long baseline. This project serves as a testbed for the forthcoming CHIME/FRB Outriggers project.

astro-ph.IM↗

arXiv2021

Interstellar Interferometry: Precise Curvature Measurement from Pulsar Secondary Spectra

The parabolic structure of the secondary or conjugate spectra of pulsars is often the result of isolated one-dimensional (or at least highly anisotropic) lenses in the ISM. The curvature of these features contains information about the velocities of the Earth, ISM, and pulsar along the primary axis of the lens. As a result, measuring variations in the curvature over the course of a year, or the orbital period for pulsars in binaries, can constrain properties of the screen and pulsar. In particular the pulsar distance and orbital inclination for binary systems can be found for multiple screens or systems with prior information on $\sin(i)$. By mapping the conjugate spectra into a space where the main arc and inverted arclets are straight lines, we are able to make use of the full information content from the inverted arclet curvatures, amplitudes, and phases using eigenvectors to uniquely and optimally retrieve phase information. This allows for a higher precision measurement than the standard Hough transform for systems where these features are available. Our technique also directly yields the best fit 1D impulse response function for the interstellar lens given in terms of the Doppler shift, time delay, and magnification of images on the sky as seen from a single observatory. This can be extended for use in holographic imaging of the lens by combining multiple telescopes. We present examples of this new method for both simulated data and actual observations of PSR B0834+06.

astro-ph.IM↗

arXiv2020

The $\theta$-$\theta$ Diagram: Transforming pulsar scintillation spectra to coordinates on highly anisotropic interstellar scattering screens

We introduce a novel analysis technique for pulsar secondary spectra. The power spectrum of pulsar scintillation (referred to as the "secondary spectrum") shows differential delays and Doppler shifts due to interference from multi-path propagation through the interstellar medium. We develop a transformation which maps these observables to angular coordinates on a single thin screen of phase-changing material. This transformation is possible without degeneracies in the case of a one-dimensional distribution of images on this screen, which is often a successful description of the phenomenon. The double parabolic features of secondary spectra are transformed into parallel linear features, whose properties we describe in detail. Furthermore, we introduce methods to measure the curvature parameter and the field amplitude distribution of images by applying them to observations of PSR B0834+06. Finally, we extend this formalism to two-dimensional distributions of images on the interstellar screen.

astro-ph.IM↗

arXiv2019

Measuring the Earth's Synchrotron Emission from Radiation Belts with a Lunar Near Side Radio Array

The high kinetic energy electrons that populate the Earth's radiation belts emit synchrotron emissions because of their interaction with the planetary magnetic field. A lunar near side array would be uniquely positioned to image this emission and provide a near real time measure of how the Earth's radiation belts are responding to the current solar input. The Salammbo code is a physical model of the dynamics of the three-dimensional phase-space electron densities in the radiation belts, allowing the prediction of 1 keV to 100 MeV electron distributions trapped in the belts. This information is put into a synchrotron emission simulator which provides the brightness distribution of the emission up to 1 MHz from a given observation point. Using Digital Elevation Models from Lunar Reconnaissance Orbiter (LRO) Lunar Orbiter Laser Altimeter (LOLA) data, we select a set of locations near the Lunar sub-Earth point with minimum elevation variation over various sized patches where we simulate radio receivers to create a synthetic aperture. We consider all realistic noise sources in the low frequency regime. We then use a custom CASA code to image and process the data from our defined array, using SPICE to align the lunar coordinates with the Earth. We find that for a moderate lunar surface electron density of 250/cm^3, the radiation belts may be detected every 12-24 hours with a 16384 element array over a 10 km diameter circle. Changing electron density can make measurements 10x faster at lunar night, and 10x slower at lunar noon.

physics.space-ph↗