arXiv subjects

Dan Wu

Publications and source records attributed to Dan Wu.

At least 19 recordsLinked to original sources

arXiv2026

Differences in Small-Signal Stability Boundaries Between Aggregated and Granular DFIG Models

Broadband oscillations in wind farms have been widely reported in recent years. Past studies have examined various types of oscillations in wind farms, relating small-signal stability to control settings, operating conditions, and electrical parameters. However, most analyses are performed on aggregated single-unit models, which may deviate from the true behavior, leading to misleading stability assessments. To investigate how aggregation affects stability conclusions, this paper develops detailed single-, two-, and three-unit doubly-fed induction generator (DFIG) models and their aggregated counterparts. Then, a D-decomposition-related ray-extrapolation method is proposed to characterize the small-signal stability region of nonlinear DFIG models in the parameter space, delineating stability boundaries under numerous parameter combinations. The study reveals that aggregated models stability regions within the parameter planes of control settings and operating conditions differ from those of granular models in terms of basic shape, critical modes, and evolution patterns, posing a risk of misjudging stability margins.

eess.SY↗

arXiv2026

Evaluating Power Flow Manifold from Local Data around a Single Operating Point via Geodesics

The widespread adoption of renewable energy poses a challenge in maintaining a feasible operating point in highly variable scenarios. This paper demonstrates that, within a feasible region of a power system that meets practical stability requirements, the power flow equations define a smooth bijection between nodal voltage phasors (angle and magnitude) and nodal active/reactive power injections. Based on this theoretical foundation, this paper proposes a data-based power flow evaluation method that can imply the associated power flow manifold from a limited number of data points around a single operating point. Using techniques from differential geometry and analytic functions, we represent geodesic curves in the associated power flow manifold as analytic functions at the initial point. Then, a special algebraic structure of the power flow problem is revealed and applied to reduce the computation of all higher-order partial derivatives to that of the first-order ones. Integrating these techniques yields the proposed data-based evaluation method, suggesting that a small number of local measurements around a single operating point is sufficient to imply the entire associated power flow manifold. Numerical cases with arbitrary directional variations are tested, certifying the efficacy of the proposed method.

eess.SY↗

arXiv2026

Self-Curriculum Model-based Reinforcement Learning for Shape Control of Deformable Linear Objects

Precise shape control of Deformable Linear Objects (DLOs) is crucial in robotic applications such as industrial and medical fields. However, existing methods face challenges in handling complex large deformation tasks, especially those involving opposite curvatures, and lack efficiency and precision. To address this, we propose a two-stage framework combining Reinforcement Learning (RL) and online visual servoing. In the large-deformation stage, a model-based reinforcement learning approach using an ensemble of dynamics models is introduced to significantly improve sample efficiency. Additionally, we design a self-curriculum goal generation mechanism that dynamically selects intermediate-difficulty goals with high diversity through imagined evaluations, thereby optimizing the policy learning process. In the small-deformation stage, a Jacobian-based visual servo controller is deployed to ensure high-precision convergence. Simulation results show that the proposed method enables efficient policy learning and significantly outperforms mainstream baselines in shape control success rate and precision. Furthermore, the framework effectively transfers the policy trained in simulation to real-world tasks with zero-shot adaptation. It successfully completes all 30 cases with diverse initial and target shapes across DLOs of different sizes and materials. The project website is available at: https://anonymous.4open.science/w/sc-mbrl-dlo-EB48/

cs.RO↗

arXiv2026

SurfAge-Net: A Hierarchical Surface-Based Network for Interpretable Fine-Grained Brain Age Prediction

Brain age prediction serves as a powerful framework for assessing brain status and detecting deviations associated with neurodevelopmental and neurodegenerative disorders. However, most existing approaches emphasize whole-brain age prediction and therefore overlook the pronounced regional heterogeneity of brain maturation that is crucial for detecting localized atypical trajectories. To address this limitation, we propose a novel spherical surface-based brain age prediction network (SurfAge-Net) that leverages multiple morphological metrics to capture region-specific developmental patterns with enhanced robustness and clinical interpretability. SurfAge-Net establishes a new modeling paradigm by incorporating the connectomic principles of cortical organization: it explicitly models both intra- and inter-hemispheric dependencies through a spatial-channel mixing and a lateralization-aware attention mechanism, enabling the network to characterize the coordinate maturation pattern uniquely associated with each target region. Validated on three fetal and neonatal datasets, SurfAge-Net outperforms existing approaches (global MAE = 0.54, regional MAE = 0.45 in gestational/postmenstrual weeks) and demonstrates strong generalizability across external cohorts. Importantly, it provides spatially precise and biologically interpretable maps of cortical maturation, effectively identifying heterogeneous delays and regional-specific abnormalities in atypical developmental populations. These results established fine-grained brain age prediction as a promising paradigm for advancing neurodevelopmental research and supporting early clinical assessment.

q-bio.NC↗

arXiv2026

A Study Revealing Physical Attributes of Supernova Remnant in G321.3-3.9

We present a radio analysis of the recently identified supernova remnant G321.3-3.9 using archival multi-wavelength data spanning 88-2304 MHz. The source exhibits an elliptical shell-like morphology (1.3 deg x 1.7 deg) and a relatively flat non-thermal spectral index of alpha = -0.40 +/- 0.03. The distance is estimated using both the Sigma-D relation (1.6-2.9 kpc) and tentative associations with HI structures, the latter suggesting a near-side solution of 2.5-3.3 kpc, though the physical connection remains uncertain.

astro-ph.GA↗

arXiv2025

HyperVL: An Efficient and Dynamic Multimodal Large Language Model for Edge Devices

Current multimodal large lanauge models possess strong perceptual and reasoning capabilities, however high computational and memory requirements make them difficult to deploy directly on on-device environments. While small-parameter models are progressively endowed with strong general capabilities, standard Vision Transformer (ViT) encoders remain a critical bottleneck, suffering from excessive latency and memory consumption when processing high-resolution inputs.To address these challenges, we introduce HyperVL, an efficient multimodal large language model tailored for on-device inference. HyperVL adopts an image-tiling strategy to cap peak memory usage and incorporates two novel techniques: (1) a Visual Resolution Compressor (VRC) that adaptively predicts optimal encoding resolutions to eliminate redundant computation, and (2) Dual Consistency Learning (DCL), which aligns multi-scale ViT encoders within a unified framework, enabling dynamic switching between visual branches under a shared LLM. Extensive experiments demonstrate that HyperVL achieves state-of-the-art performance among models of comparable size across multiple benchmarks. Furthermore, it significantly significantly reduces latency and power consumption on real mobile devices, demonstrating its practicality for on-device multimodal inference.

cs.CV↗

arXiv2025

Fast directional transport of Leidenfrost droplets on spiked surfaces

The Leidenfrost effect enables droplets to levitate above a solid surface, significantly reducing the resistance to droplet motion. In this study, a spiked surface is utilized to achieve fast directional transport of Leidenfrost droplets, with a maximum average speed reaching 8.36 m per second over a 10 cm distance,far exceeding the previously reported maximum speeds for droplet transport. When a droplet falls onto a substrate heated above the Leidenfrost temperature, it becomes trapped between spikes and levitates. The sides and bottom surface of the droplet undergo vaporization, creating a gas film between the solid wall and the droplet. However, this gas film is unstable and prone to rupture at certain points, causing the droplet to come into contact with the solid surface. Therefore, the droplets undergo violent boiling, leading to intense compression and bursting into smaller daughter droplets, which are then propelled rapidly along the substrate. Additionally, the asymmetric geometry of the spikes ensures that droplets move unidirectionally along the longitudinal direction. This study proposes a novel droplet self-propulsion mechanism, pioneering new strategies for enhancing droplet transport speed..

physics.flu-dyn↗

arXiv2025

Local Collaborative Filtering: A Collaborative Filtering Method that Utilizes Local Similarities among Users

To leverage user behavior data from the Internet more effectively in recommender systems, this paper proposes a novel collaborative filtering (CF) method called Local Collaborative Filtering (LCF). LCF utilizes local similarities among users and integrates their data using the law of large numbers (LLN), thereby improving the utilization of user behavior data. Experiments are conducted on the Steam game dataset, and the results of LCF align with real-world needs.

cs.IR↗

arXiv2025

Beyond Energy Functions and Numerical Integration: A New Methodology to Determine Transient Stability at the Initial State

This paper presents a novel method for transient stability analysis (TSA) that circumvents the limitations of sequential numerical integration and energy functions. The proposed method begins by constructing a trajectory-dependent stability indicator function to distinguish the system's destiny. To overcome the difficulty in analyzing the asymptotic behavior at infinite time, a strategic time contraction mapping is then applied. This allows TSA to be recast as a pole-placement detection problem for the indicator function. By leveraging high-order derivatives at the initial state, a rational function approximation is derived, yielding a mathematically direct and computationally efficient prediction. Numerical validations on benchmark systems demonstrate that the method not only provides a direct mathematical shortcut for TSA in power systems but also establishes a promising new methodology for evaluating the transient stability of a broad class of nonlinear dynamical systems.

eess.SY↗

arXiv2025

Connectivity-Guided Sparsification of 2-FWL GNNs: Preserving Full Expressivity with Improved Efficiency

Higher-order Graph Neural Networks (HOGNNs) based on the 2-FWL test achieve superior expressivity by modeling 2- and 3-node interactions, but at $\mathcal{O}(n^3)$ computational cost. However, this computational burden is typically mitigated by existing efficiency methods at the cost of reduced expressivity. We propose \textbf{Co-Sparsify}, a connectivity-aware sparsification framework that eliminates \emph{provably redundant} computations while preserving full 2-FWL expressive power. Our key insight is that 3-node interactions are expressively necessary only within \emph{biconnected components} -- maximal subgraphs where every pair of nodes lies on a cycle. Outside these components, structural relationships can be fully captured via 2-node message passing or global readout, rendering higher-order modeling unnecessary. Co-Sparsify restricts 2-node message passing to connected components and 3-node interactions to biconnected ones, removing computation without approximation or sampling. We prove that Co-Sparsified GNNs are as expressive as the 2-FWL test. Empirically, on PPGN, Co-Sparsify matches or exceeds accuracy on synthetic substructure counting tasks and achieves state-of-the-art performance on real-world benchmarks (ZINC, QM9). This study demonstrates that high expressivity and scalability are not mutually exclusive: principled, topology-guided sparsification enables powerful, efficient GNNs with theoretical guarantees.

cs.LG↗

arXiv2025

Non-Invasive Detection of PROState Cancer with Novel Time-Dependent Diffusion MRI and AI-Enhanced Quantitative Radiological Interpretation: PROS-TD-AI

Prostate cancer (PCa) is the most frequently diagnosed malignancy in men and the eighth leading cause of cancer death worldwide. Multiparametric MRI (mpMRI) has become central to the diagnostic pathway for men at intermediate risk, improving de-tection of clinically significant PCa (csPCa) while reducing unnecessary biopsies and over-diagnosis. However, mpMRI remains limited by false positives, false negatives, and moderate to substantial interobserver agreement. Time-dependent diffusion (TDD) MRI, a novel sequence that enables tissue microstructure characterization, has shown encouraging preclinical performance in distinguishing clinically significant from insignificant PCa. Combining TDD-derived metrics with machine learning may provide robust, zone-specific risk prediction with less dependence on reader training and improved accuracy compared to current standard-of-care. This study protocol out-lines the rationale and describes the prospective evaluation of a home-developed AI-enhanced TDD-MRI software (PROSTDAI) in routine diagnostic care, assessing its added value against PI-RADS v2.1 and validating results against MRI-guided prostate biopsy.

eess.IV↗

arXiv2025

A robust and compliant robotic assembly control strategy for batch precision assembly task with uncertain fit types and fit amounts

In some high-precision industrial applications, robots are deployed to perform precision assembly tasks on mass batches of manufactured pegs and holes. If the peg and hole are designed with transition fit, machining errors may lead to either a clearance or an interference fit for a specific pair of components, with uncertain fit amounts. This paper focuses on the robotic batch precision assembly task involving components with uncertain fit types and fit amounts, and proposes an efficient methodology to construct the robust and compliant assembly control strategy. Specifically, the batch precision assembly task is decomposed into multiple deterministic subtasks, and a force-vision fusion controller-driven reinforcement learning method and a multi-task reinforcement learning training method (FVFC-MTRL) are proposed to jointly learn multiple compliance control strategies for these subtasks. Subsequently, the multi-teacher policy distillation approach is designed to integrate multiple trained strategies into a unified student network, thereby establishing a robust control strategy. Real-world experiments demonstrate that the proposed method successfully constructs the robust control strategy for high-precision assembly task with different fit types and fit amounts. Moreover, the MTRL framework significantly improves training efficiency, and the final developed control strategy achieves superior force compliance and higher success rate compared with many existing methods.

cs.RO↗

arXiv2025

Multivariate Long-term Time Series Forecasting with Fourier Neural Filter

Multivariate long-term time series forecasting has been suffering from the challenge of capturing both temporal dependencies within variables and spatial correlations across variables simultaneously. Current approaches predominantly repurpose backbones from natural language processing or computer vision (e.g., Transformers), which fail to adequately address the unique properties of time series (e.g., periodicity). The research community lacks a dedicated backbone with temporal-specific inductive biases, instead relying on domain-agnostic backbones supplemented with auxiliary techniques (e.g., signal decomposition). We introduce FNF as the backbone and DBD as the architecture to provide excellent learning capabilities and optimal learning pathways for spatio-temporal modeling, respectively. Our theoretical analysis proves that FNF unifies local time-domain and global frequency-domain information processing within a single backbone that extends naturally to spatial modeling, while information bottleneck theory demonstrates that DBD provides superior gradient flow and representation capacity compared to existing unified or sequential architectures. Our empirical evaluation across 11 public benchmark datasets spanning five domains (energy, meteorology, transportation, environment, and nature) confirms state-of-the-art performance with consistent hyperparameter settings. Notably, our approach achieves these results without any auxiliary techniques, suggesting that properly designed neural architectures can capture the inherent properties of time series, potentially transforming time series modeling in scientific and industrial applications.

cs.LG↗

arXiv2025

AllTact Fin Ray: A Compliant Robot Gripper with Omni-Directional Tactile Sensing

Tactile sensing plays a crucial role in robot grasping and manipulation by providing essential contact information between the robot and the environment. In this paper, we present AllTact Fin Ray, a novel compliant gripper design with omni-directional and local tactile sensing capabilities. The finger body is unibody-casted using transparent elastic silicone, and a camera positioned at the base of the finger captures the deformation of the whole body and the contact face. Due to the global deformation of the adaptive structure, existing vision-based tactile sensing approaches that assume constant illumination are no longer applicable. To address this, we propose a novel sensing method where the global deformation is first reconstructed from the image using edge features and spatial constraints. Then, detailed contact geometry is computed from the brightness difference against a dynamically retrieved reference image. Extensive experiments validate the effectiveness of our proposed gripper design and sensing method in contact detection, force estimation, object grasping, and precise manipulation.

cs.RO↗

arXiv2025

Data-aware Dynamic Execution of Irregular Workloads on Heterogeneous Systems

Current approaches to scheduling workloads on heterogeneous systems with specialized accelerators often rely on manual partitioning, offloading tasks with specific compute patterns to accelerators. This method requires extensive experimentation and human effort to identify the tasks suitable for the accelerator. To solve this problem, we introduce DyPe, a scheduling framework tailored for heterogeneous systems with specialized accelerators. Our method automatically partitions, deploys, and reschedules execution when necessary by dynamically analyzing the characteristics of the input data and leveraging the interoperator parallelism among heterogeneous devices. DyPe navigates a multi-objective, multi-constraint design space that considers both system constraints and application requirements, which allows it to discover Pareto-optimal mapping configurations, improving the system's overall performance and effectively managing energy-performance trade-offs. To demonstrate the benefits of our approach on real hardware, we build a heterogeneous system of GPUs and FPGAs with peer-to-peer data transfers. The experiments show that conventional static scheduling is optimal for 13 out of 86 cases for different workloads and system settings while DyPe is adaptable and able to find the optimal schedule in 77 out of 86 cases, with an average of only 3.95% performance or energy efficiency loss in the sub-optimal cases. Performance evaluation of DyPe shows an average of 1.53x throughput and 1.09x energy efficiency improvement over the static schedule baseline and 1.44x throughput and 1.66x energy efficiency over the GPU-only baseline.

cs.DC↗

arXiv2025

Surface Vision Mamba: Leveraging Bidirectional State Space Model for Efficient Spherical Manifold Representation

Attention-based methods have demonstrated exceptional performance in modelling long-range dependencies on spherical cortical surfaces, surpassing traditional Geometric Deep Learning (GDL) models. However, their extensive inference time and high memory demands pose challenges for application to large datasets with limited computing resources. Inspired by the state space model in computer vision, we introduce the attention-free Vision Mamba (Vim) to spherical surfaces, presenting a domain-agnostic architecture for analyzing data on spherical manifolds. Our method achieves surface patching by representing spherical data as a sequence of triangular patches derived from a subdivided icosphere. The proposed Surface Vision Mamba (SiM) is evaluated on multiple neurodevelopmental phenotype regression tasks using cortical surface metrics from neonatal brains. Experimental results demonstrate that SiM outperforms both attention- and GDL-based methods, delivering 4.8 times faster inference and achieving 91.7% lower memory consumption compared to the Surface Vision Transformer (SiT) under the Ico-4 grid partitioning. Sensitivity analysis further underscores the potential of SiM to identify subtle cognitive developmental patterns. The code is available at https://github.com/Rongzhao-He/surface-vision-mamba.

cs.CV↗

arXiv2025

Hybrid Parallel Collaborative Simulation Framework Integrating Device Physics with Circuit Dynamics for PDAE-Modeled Power Electronic Equipment

Optimizing high-performance power electronic equipment, such as power converters, requires multiscale simulations that incorporate the physics of power semiconductor devices and the dynamics of other circuit components, especially in conducting Design of Experiments (DoEs), defining the safe operating area of devices, and analyzing failures related to semiconductor devices. However, current methodologies either overlook the intricacies of device physics or do not achieve satisfactory computational speeds. To bridge this gap, this paper proposes a Hybrid-Parallel Collaborative (HPC) framework specifically designed to analyze the Partial Differential Algebraic Equation (PDAE) modeled power electronic equipment, integrating the device physics and circuit dynamics. The HPC framework employs a dynamic iteration to tackle the challenges inherent in solving the coupled nonlinear PDAE system, and utilizes a hybrid-parallel computing strategy to reduce computing time. Physics-based system partitioning along with hybrid-process-thread parallelization on shared and distributed memory are employed, facilitating the simulation of hundreds of partial differential equations (PDEs)-modeled devices simultaneously without compromising speed. Experiments based on the hybrid line commutated converter and reverse-blocking integrated gate-commutated thyristors are conducted under 3 typical real-world scenarios: semiconductor device optimization for the converter; converter design optimization; and device failure analysis. The HPC framework delivers simulation speed up to 60 times faster than the leading commercial software, while maintaining carrier-level accuracy in the experiments. This shows great potential for comprehensive analysis and collaborative optimization of devices and electronic power equipment, particularly in extreme conditions and failure scenarios.

eess.SY↗

arXiv2025

ThinTact:Thin Vision-Based Tactile Sensor by Lensless Imaging

Vision-based tactile sensors have drawn increasing interest in the robotics community. However, traditional lens-based designs impose minimum thickness constraints on these sensors, limiting their applicability in space-restricted settings. In this paper, we propose ThinTact, a novel lensless vision-based tactile sensor with a sensing field of over 200 mm2 and a thickness of less than 10 mm.ThinTact utilizes the mask-based lensless imaging technique to map the contact information to CMOS signals. To ensure real-time tactile sensing, we propose a real-time lensless reconstruction algorithm that leverages a frequency-spatial-domain joint filter based on discrete cosine transform (DCT). This algorithm achieves computation significantly faster than existing optimization-based methods. Additionally, to improve the sensing quality, we develop a mask optimization method based on the generic algorithm and the corresponding system matrix calibration algorithm.We evaluate the performance of our proposed lensless reconstruction and tactile sensing through qualitative and quantitative experiments. Furthermore, we demonstrate ThinTact's practical applicability in diverse applications, including texture recognition and contact-rich object manipulation. The paper will appear in the IEEE Transactions on Robotics: https://ieeexplore.ieee.org/document/10842357. Video: https://youtu.be/YrOO9BDMAHo

cs.RO↗