arXiv subjects

Damien Chablat

Publications and source records attributed to Damien Chablat.

At least 199 records · Page 11Linked to original sources

arXiv2007

Passive Control Architecture for Virtual Humans

In the present paper, we introduce a new control architecture aimed at driving virtual humans in interaction with virtual environments, by motion capture. It brings decoupling of functionalities, and also of stability thanks to passivity. We show projections can break passivity, and thus must be used carefully. Our control scheme enables task space and internal control, contact, and joint limits management. Thanks to passivity, it can be easily extended. Besides, we introduce a new tool as for manikin's control, which makes it able to build passive projections, so as to guide the virtual manikin when sharp movements are needed.

cs.RO↗

arXiv2007

Modélisation Dynamique d'un Robot Parallèle à 3-DDL : l'Orthoglide

In this article, we propose a method for calculation of the inverse and direct dynamic models of the Orthoglide, a parallel robot with threedegrees of freedom in translation. These models are calculated starting from the elements of the dynamic model of the kinematic chain structure and equations of Newton-Euler applied to the platform. These models are obtained in explicit form having an interesting physical interpretation.

cs.RO↗

arXiv2007

Degeneracy study of the forward kinematics of planar 3-RPR parallel manipulators

This paper investigates two situations in which the forward kinematics of planar 3-RPR parallel manipulators degenerates. These situations have not been addressed before. The first degeneracy arises when the three input joint variables r1, r2 and r3 satisfy a certain relationship. This degeneracy yields a double root of the characteristic polynomial in t, which could be erroneously interpreted as two coalesce assembly modes. But, unlike what arises in non-degenerate cases, this double root yields two sets of solutions for the position coordinates (x, y) of the platform. In the second situation, we show that the forward kinematics degenerates over the whole joint space if the base and platform triangles are congruent and the platform triangle is rotated by 180 deg about one of its sides. For these "degenerate" manipulators, which are defined here for the first time, the forward kinematics is reduced to the solution of a 3rd-degree polynomial and a quadratics in sequence. Such manipulators constitute, in turn, a new family of analytic planar manipulators that would be more suitable for industrial applications.

cs.RO↗

arXiv2007

Kinematic Analysis of a Family of 3R Manipulators

The workspace topologies of a family of 3-revolute (3R) positioning manipulators are enumerated. The workspace is characterized in a half-cross section by the singular curves. The workspace topology is defined by the number of cusps that appear on these singular curves. The design parameters space is shown to be divided into five domains where all manipulators have the same number of cusps. Each separating surface is given as an explicit expression in the DH-parameters. As an application of this work, we provide a necessary and sufficient condition for a 3R orthogonal manipulator to be cuspidal, i.e. to change posture without meeting a singularity. This condition is set as an explicit expression in the DH parameters.

cs.RO↗

arXiv2007

The Computation of All 4R Serial Spherical Wrists With an Isotropic Architecture

A spherical wrist of the serial type with n revolute (R) joints is said to be isotropic if it can attain a posture whereby the singular values of its Jacobian matrix are all equal to sqrt(n/3). What isotropy brings about is robustness to manufacturing, assembly, and measurement errors, thereby guaranteeing a maximum orientation accuracy. In this paper we investigate the existence of redundant isotropic architectures, which should add to the dexterity of the wrist under design by virtue of its extra degree of freedom. The problem formulation, for, leads to a system of eight quadratic equations with eight unknowns. The Bezout number of this system is thus 2^8=256, its BKK bound being 192. However, the actual number of solutions is shown to be 32. We list all solutions of the foregoing algebraic problem. All these solutions are real, but distinct solutions do not necessarily lead to distinct manipulators. Upon discarding those algebraic solutions that yield no new wrists, we end up with exactly eight distinct architectures, the eight corresponding manipulators being displayed at their isotropic postures.

cs.RO↗

arXiv2007

A design oriented study for 3R Orthogonal Manipulators With Geometric Simplifications

This paper proposes a method to calculate the largest Regular Dextrous Workspace (RDW) of some types of three-revolute orthogonal manipulators that have at least one of their DH parameters equal to zero. Then a new performance index based on the RDW is introduced, the isocontours of this index are plotted in the parameter space of the interesting types of manipulators and finally an inspection of the domains of the parameter spaces is conducted in order to identify the better manipulator architectures. The RDW is a part of the workspace whose shape is regular (cube, cylinder) and the performances (conditioning index) are bounded inside. The groups of 3R orthogonal manipulators studied have interesting kinematic properties such as, a well-connected workspace that is fully reachable with four inverse kinematic solutions and that does not contain any void. This study is of high interest for the design of alternative manipulator geometries.

cs.RO↗

arXiv2007

Moveability and Collision Analysis for Fully-Parallel Manipulators

The aim of this paper is to characterize the moveability of fully-parallel manipulators in the presence of obstacles. Fully parallel manipulators are used in applications where accuracy, stiffness or high speeds and accelerations are required \cite{Merlet:97}. However, one of its main drawbacks is a relatively small workspace compared to the one of serial manipulators. This is due mainly to the existence of potential internal collisions, and the existence of singularities. In this paper, the notion of free aspect is defined which permits to exhibit domains of the workspace and the joint space free of singularity and collision. The main application of this study is the moveability analysis in the workspace of the manipulator as well as path-planning, control and design.

cs.RO↗

arXiv2007

Working Modes and Aspects in Fully-Parallel Manipulator

The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [Borrel 86], and redefined for parallel manipulators with only one inverse kinematic solution in [Wenger 1997], is redefined for general fully parallel manipulators. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the "inverse kinematics" and the "direct kinematics" matrices. The study of these matrices allow to respectively define the parallel and the serial singularities. The notion of working modes is introduced to separate inverse kinematic solutions. Thus, we can find out domains of the workspace and the joint space exempt of singularity. Application of this study is the moveability analysis in the workspace of the manipulator as well as path-planing and control. This study is illustrated in this paper with a RR-RRR planar parallel manipulator.

cs.RO↗

arXiv2007

The Isoconditioning Loci of A Class of Closed-Chain Manipulators

The subject of this paper is a special class of closed-chain manipulators. First, we analyze a family of two-degree-of-freedom (dof) five-bar planar linkages. Two Jacobian matrices appear in the kinematic relations between the joint-rate and the Cartesian-velocity vectors, which are called the ``inverse kinematics" and the "direct kinematics" matrices. It is shown that the loci of points of the workspace where the condition number of the direct-kinematics matrix remains constant, i.e., the isoconditioning loci, are the coupler points of the four-bar linkage obtained upon locking the middle joint of the linkage. Furthermore, if the line of centers of the two actuated revolutes is used as the axis of a third actuated revolute, then a three-dof hybrid manipulator is obtained. The isoconditioning loci of this manipulator are surfaces of revolution generated by the isoconditioning curves of the two-dof manipulator, whose axis of symmetry is that of the third actuated revolute.

cs.RO↗

arXiv2007

Workspace and Assembly modes in Fully-Parallel Manipulators : A Descriptive Study

The goal of this paper is to explain, using a typical example, the distribution of the different assembly modes in the workspace and their effective role in the execution of trajectories. The singular and non-singular changes of assembly mode are described and compared to each other. The non-singular change of assembly mode is more deeply analysed and discussed in the context of trajectory planning. In particular, it is shown that, according to the location of the initial and final configurations with respect to the uniqueness domains in the workspace, there are three different cases to consider before planning a linking trajectory.

cs.RO↗

arXiv2007

Conception Isotropique D'Une Morphologie ParallÈle : Application à L'Usinage

The aim of this paper is the isotropic design of a hybrid morphology dedicated to 3-axis machining applications. It is necessary to ensure the feasibility of continuous, singularity-free trajectories, as well as a good manipulability in position and velocity. We want to propose an alternative design to conventional serial machine-tools. We compare a serial PPP machine-tool (three prismatic orthogonal axes) with a hybrid architecture which we optimize only the first two axes. The critrerion used for the optimization is the conditioning of the Jacobian matrices. The optimum, namely isotropy, can be obtained which provides our architecture with excellent manipulability properties.

cs.RO↗

arXiv2007

A distributed Approach for Access and Visibility Task under Ergonomic Constraints with a Manikin in a Virtual Reality Environment

This paper presents a new method, based on a multi-agent system and on digital mock-up technology, to assess an efficient path planner for a manikin for access and visibility task under ergonomic constraints. In order to solve this problem, the human operator is integrated in the process optimization to contribute to a global perception of the environment. This operator cooperates, in real-time, with several automatic local elementary agents. The result of this work validates solutions brought by digital mock-up and that can be applied to simulate maintenance task.

cs.RO↗

arXiv2007

The Kinematics of Manipulators Built From Closed Planar Mechanisms

The paper discusses the kinematics of manipulators builts of planar closed kinematic chains. A special kinematic scheme is extracted from the array of these mechanisms that looks the most promising for the creation of different types of robotic manipulators. The structural features of this manipulator determine a number of its original properties that essentially simplify its control. These features allow the main control problems to be effectively overcome by application of the simple kinematic problems. The workspace and singular configurations of a basic planar manipulator are studied. By using a graphic simulation method, motions of the designed mechanism are examined. A prototype of this mechanism was implemented to verify the proposed approach.

cs.RO↗

arXiv2007

Singular curves and cusp points in the joint space of 3-RPR parallel manipulators

This paper investigates the singular curves in two-dimensional slices of the joint space of a family of planar parallel manipulators. It focuses on special points, referred to as cusp points, which may appear on these curves. Cusp points play an important role in the kinematic behavior of parallel manipulators since they make possible a nonsingular change of assembly mode. The purpose of this study is twofold. First, it reviews an important previous work, which, to the authors' knowledge, has never been exploited yet. Second, it determines the cusp points in any two-dimensional slice of the joint space. First results show that the number of cusp points may vary from zero to eight. This work finds applications in both design and trajectory planning.

cs.RO↗

arXiv2007

Workspace Analysis of the Parallel Module of the VERNE Machine

The paper addresses geometric aspects of a spatial three-degree-of-freedom parallel module, which is the parallel module of a hybrid serial-parallel 5-axis machine tool. This parallel module consists of a moving platform that is connected to a fixed base by three non-identical legs. Each leg is made up of one prismatic and two pairs of spherical joint, which are connected in a way that the combined effects of the three legs lead to an over-constrained mechanism with complex motion. This motion is defined as a simultaneous combination of rotation and translation. A method for computing the complete workspace of the VERNE parallel module for various tool lengths is presented. An algorithm describing this method is also introduced.

cs.RO↗

arXiv2007

The Orthoglide: Kinematics and Workspace Analysis

The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which moves in the Cartesian x-y-z space with fixed orientation. New solutions to solve inverse/direct kinematics are proposed and a detailed workspace analysis is performed taking into account specific joint limit constraints.

cs.RO↗

arXiv2007

Subjective Evaluation of Forms in an Immersive Environment

User's perception of product, by essence subjective, is a major topic in marketing and industrial design. Many methods, based on users' tests, are used so as to characterise this perception. We are interested in three main methods: multidimensional scaling, semantic differential method, and preference mapping. These methods are used to built a perceptual space, in order to position the new product, to specify requirements by the study of user's preferences, to evaluate some product attributes, related in particular to style (aesthetic). These early stages of the design are primordial for a good orientation of the project. In parallel, virtual reality tools and interfaces are more and more efficient for suggesting to the user complex feelings, and creating in this way various levels of perceptions. In this article, we present on an example the use of multidimensional scaling, semantic differential method and preference mapping for the subjective assessment of virtual products. These products, which geometrical form is variable, are defined with a CAD model and are proposed to the user with a spacemouse and stereoscopic glasses. Advantages and limitations of such evaluation is next discussed..

cs.HC↗

arXiv2007

Realistic Rendering of Kinetostatic Indices of Mechanisms

The work presented in this paper is related to the use of a haptic device in an environment of robotic simulation. Such device introduces a new approach to feel and to understand the boundaries of the workspace of mechanisms as well as its kinetostatic properties. Indeed, these concepts are abstract and thus often difficult to understand for the end-users. To catch his attention, we propose to amplify the problems of the mechanisms in order to help him to take the good decisions.

cs.RO↗