arXiv subjects

D. Vohl

Publications and source records attributed to D. Vohl.

At least 19 recordsLinked to original sources

arXiv2026

A Square Kilometre Array Pulsar Census

Most of the pulsar science case with the Square Kilometre Array (SKA) depends on long-term precision timing of a large number of pulsars, as well as their astrometric measurements using very long baseline interferometry (VLBI). However, before we can time them, or VLBI them, we must first find them. Here, we describe the considerations and strategies needed when planning an all-sky blind pulsar survey using the SKA. Based on our understanding of the pulsar population, the performance of the now-under-construction SKA elements, and practical constraints such as evading radio frequency interference, we project pulsar survey yields; this is done using two complementary methods for a number of illustrative survey designs, combining SKA-Low and SKA-Mid Bands 1 and 2 in a variety of ways. A composite survey using both SKA-Mid and SKA-Low is optimal, with Mid Band 2 focused in the plane. We find that, given its much higher effective area and survey speed, the best strategy is to use SKA-Low to cover as much sky as possible, ideally also overlapping with the areas covered by Mid. We find that an all-sky blind survey with Phase 1 of the SKA with the AA* array assembly will detect $\sim10,000$ slow pulsars and $\sim 800$ millisecond pulsars (MSPs) if SKA-Mid covers the region within $5\deg$ of the plane, while higher latitudes will be covered with SKA-Low. For the same survey region the yield with AA4 is $\sim 20\%$ higher, but this increases considerably by broadening the range covered by SKA-Mid Bands 1 and 2. In particular one could expect a yield of $\sim 1300$ MSPs with AA4. The pulsar census will enable us to set new constraints on the uncertain physical properties of the entire neutron star population. This will be crucial for addressing major SKA science questions including the dense-matter equation of state, strong-field gravity tests, and gravitational wave astronomy.

astro-ph.HE↗

arXiv2026

Understanding Pulsar Magnetospheres with the SKAO

The SKA telescopes will bring unparalleled sensitivity across a broad radio band, a wide field of view across the Southern sky, and the capacity for sub-arraying, all of which make them the ideal instruments for studying the pulsar magnetosphere. This chapter describes the advances that have been made in pulsar magnetosphere physics over the last decade, and details how these have been made possible through the advances of modern radio telescopes, particularly SKA precursors and pathfinders. It explains how the SKA telescopes would transform the field of pulsar magnetosphere physics through a combination of large-scale monitoring surveys and in-depth follow-up observations of unique sources and new discoveries. Finally, it describes how the specific observing opportunities available with the AA* and AA4 configurations will achieve the advances necessary to solve the problem of pulsar radio emission physics in the coming years.

astro-ph.HE↗

arXiv2025

A Square Kilometre Array Pulsar Census

Most of the pulsar science case with the Square Kilometre Array (SKA) depends on long-term precision pulsar timing of a large number of pulsars, as well as astrometric measurements of these using very long baseline interferometry (VLBI). But before we can time them, or VLBI them, we must first find them. Here, we describe the considerations and strategies one needs to account for when planning an all-sky blind pulsar survey using the SKA. Based on our understanding of the pulsar population, the performance of the now-under-construction SKA elements, and practical constraints such as evading radio frequency interference, we project pulsar survey yields using two complementary methods for a number of illustrative survey designs, combining SKA1-Low and SKA1-Mid Bands 1 and 2 in a variety of ways. A composite survey using both Mid and Low is optimal, with Mid Band 2 focused in the plane. We find that, given its much higher effective area and survey speed, the best strategy is to use SKA1-Low to cover as much sky as possible, ideally also overlapping with the areas covered by Mid. In our most realistic scenario, we find that an all-sky blind survey with Phase 1 of the SKA with the AA* array assembly will detect $\sim10,000$ slow pulsars and $\sim 800$ millisecond pulsars (MSPs) if SKA1-Mid covers the region within $5\deg$ of the plane, while higher latitudes will be covered with SKA1-Low. The yield with AA4 is $\sim 20\%$ higher. One could increase these numbers by increasing the range covered by SKA1-Mid Bands 1 and 2, at the cost of a considerably longer survey. The pulsar census will enable us to set new constraints on the uncertain physical properties of the entire neutron star population. This will be crucial for addressing major SKA science questions including the dense-matter equation of state, strong-field gravity tests, and gravitational wave astronomy.

astro-ph.HE↗

arXiv2025

Understanding pulsar magnetospheres with the SKAO

The SKA telescopes will bring unparalleled sensitivity across a broad radio band, a wide field of view across the Southern sky, and the capacity for sub-arraying, all of which make them the ideal instruments for studying the pulsar magnetosphere. This paper describes the advances that have been made in pulsar magnetosphere physics over the last decade, and details how these have been made possible through the advances of modern radio telescopes, particularly SKA precursors and pathfinders. It explains how the SKA telescopes would transform the field of pulsar magnetosphere physics through a combination of large-scale monitoring surveys and in-depth follow-up observations of unique sources and new discoveries. Finally, it describes how the specific observing opportunities available with the AA* and AA4 configurations will achieve the advances necessary to solve the problem of pulsar radio emission physics in the coming years.

astro-ph.HE↗

arXiv2025

The low-frequency flattening of the radio spectrum of giant HII regions in M 101

In galaxies, the flattening of the spectrum at low radio frequencies below 300 MHz has been the subject of some debate. A turnover at low frequencies could be caused by multiple physical processes, which can yield new insights into the properties of the ionised gas in the interstellar medium. We investigate the existence and nature of the low-frequency turnover in the HII regions of M 101. We study the nearby galaxy M 101 using the LOw Frequency ARray (LOFAR) at frequencies of 54 and 144 MHz, Apertif at 1370 MHz, and published combined map from the Very Large Array (VLA) and Effelesberg telescope at 4850 MHz. The spectral index between 54 and 144 MHz is inverted at the centres of HII regions. We find a significant low-frequency flattening at the centres of five out of six HII regions that we selected for this study. The low frequency flattening in HII regions of M 101 can be explained with two different free-free absorption models. The flattening is localised in a region smaller than 1.5 kpc and can only be detected with high resolution (better than 45''). The detection of low frequency flattening has important consequences for using radio continuum observations below 100 MHz to measure extinction-free star-formation rates.

astro-ph.GA↗

arXiv2023

LOFAR discovery and wide-band characterisation of an ultra-steep spectrum AGN radio remnant associated with Abell 1318

We present the discovery of a very extended (550 kpc) and low-surface-brightness ($ 3.3 \mu \mathrm{Jy} \, arcsec^{-2} $ at 144 MHz) radio emission region in Abell 1318. These properties are consistent with its characterisation as an active galactic nucleus (AGN) remnant radio plasma, based on its morphology and radio spectral properties. We performed a broad-band (54 - 1400 MHz) radio spectral index and curvature analysis using LOFAR, uGMRT, and WSRT-APERTIF data. We also derived the radiative age of the detected emission, estimating a maximum age of 250 Myr. The morphology of the source is remarkably intriguing, with two larger, oval-shaped components and a thinner, elongated, and filamentary structure in between, plausibly reminiscent of two aged lobes and a jet. Based on archival {\it Swift} as well as SDSS data we performed an X-ray and optical characterisation of the system, whose virial mass was estimated to be $ \sim 7.4 \times 10^{13} \, \mathrm{M} _{\odot}$. This places A1318 in the galaxy group regime. Interestingly, the radio source does not have a clear optical counterpart embedded in it, thus, we propose that it is most likely an unusual AGN remnant of previous episode(s) of activity of the AGN hosted by the brightest group galaxy ($ \sim 2.6 \times 10^{12} \, \mathrm{M} _{\odot}$), which is located at a projected distance of $\sim$170 kpc in the current epoch. This relatively high offset may be a result of IGrM sloshing sourced by a minor merger. The filamentary morphology of the source may suggest that the remnant plasma has been perturbed by the system dynamics, however, only future deeper X-ray observations will be able to address this question.

astro-ph.GA↗

arXiv2023

Topology of Pulsar Profiles (ToPP). I. Graph theory method and classification of the EPN

Some of the most important information on a radio pulsar is derived from its average pulse profile. Many early pulsar studies were necessarily based on only few such profiles. There, discrete profile components were linked to emission mechanism models for individual stars through human interpretation. For the population as a whole, profiles morphology must reflect the geometry and overall evolution of the radio emitting regions. The problem, however, is that this population is becoming too large for intensive studies of all sources individually. Moreover, connecting profiles from a large collection of pulsars rapidly becomes cumbersome. In this article, we present ToPP, the first-ever unsupervised method to sort pulsars by profile-shape similarity, using graph topology. We apply ToPP to the publicly available European Pulsar Network profile database, providing the first organised visual overview of multi-frequency profiles representing 90 individual pulsars. We find discrete evolutionary tracks, varying from simple, single component profiles at all frequencies, towards diverse mixtures of more complex profiles with frequency evolution. The profile evolution is continuous, extending out to millisecond pulsars, and does not fall in sharp classes. We interpret the profiles as a mixture of pulsar core/cone emission type, spin-down energetics, and the line-of-sight impact angle towards the magnetic axis. We show how ToPP can systematically classify sources into the Rankin empirical profile scheme. ToPP forms one of the key unsupervised methods that will be essential to explore upcoming pulsar census data such as expected by the Square Kilometer Array.

astro-ph.HE↗

arXiv2023

Survey-scale discovery-based research processes: Evaluating a bespoke visualisation environment for astronomical survey data

Next generation astronomical surveys naturally pose challenges for human-centred visualisation and analysis workflows that currently rely on the use of standard desktop display environments. While a significant fraction of the data preparation and analysis will be taken care of by automated pipelines, crucial steps of knowledge discovery can still only be achieved through various level of human interpretation. As the number of sources in a survey grows, there is need to both modify and simplify repetitive visualisation processes that need to be completed for each source. As tasks such as per-source quality control, candidate rejection, and morphological classification all share a single instruction, multiple data (SIMD) work pattern, they are amenable to a parallel solution. Selecting extragalactic neutral hydrogen (HI) surveys as a representative example, we use system performance benchmarking and the visual data and reasoning (VDAR) methodology from the field of information visualisation to evaluate a bespoke comparative visualisation environment: the encube visual analytics framework deployed on the 83 Megapixel Swinburne Discovery Wall. Through benchmarking using spectral cube data from existing HI surveys, we are able to perform interactive comparative visualisation via texture-based volume rendering of 180 three-dimensional (3D) data cubes at a time. The time to load a configuration of spectral cubes scale linearly with the number of voxels, with independent samples of 180 cubes (8.4 Gigavoxels or 34 Gigabytes) each loading in under 5 minutes. We show that parallel comparative inspection is a productive and time-saving technique which can reduce the time taken to complete SIMD-style visual tasks currently performed at the desktop by at least two orders of magnitude, potentially rendering some labour-intensive desktop-based workflows obsolete.

astro-ph.IM↗

arXiv2023

Apertif 1.4 GHz continuum observations of the Bo\"otes field and their combined view with LOFAR

We present a new image of a 26.5 square degree region in the Bo\"otes constellation obtained at 1.4 GHz using the Aperture Tile in Focus (Apertif) system on the Westerbork Synthesis Radio Telescope. We use a newly developed processing pipeline which includes direction-dependent self-calibration which provides a significant improvement of the quality of the images compared to those released as part of the Apertif first data release. For the Bo\"otes region, we mosaic 187 Apertif images and extract a source catalog. The mosaic image has an angular resolution of 27${\times}$11.5 arcseconds and a median background noise of 40 ${\mu}$Jy/beam. The catalog has 8994 sources and is complete down to the 0.3 mJy level. We combine the Apertif image with LOFAR images of the Bo\"otes field at 54 and 150 MHz to study spectral properties of the sources. We find a spectral flattening towards low flux density sources. Using the spectral index limits from Apertif non-detections we derive that up to 9 percent of the sources have ultra-steep spectra with a slope steeper than -1.2. Steepening of the spectral index with increasing redshift is also seen in the data showing a different dependency for the low-frequency spectral index and the high frequency one. This can be explained by a population of sources having concave radio spectra with a turnover frequency around the LOFAR band. Additionally, we discuss cases of individual extended sources with an interesting resolved spectral structure. With the improved pipeline, we aim to continue processing data from the Apertif wide-area surveys and release the improved 1.4 GHz images of several famous fields.

astro-ph.IM↗

arXiv2023

A LOFAR sample of luminous compact sources coincident with nearby dwarf galaxies

The vast majority of extragalactic compact continuum radio sources are associated with star formation or jets from (super)massive black holes and, as such, are more likely to be found in association with starburst galaxies or early-type galaxies. Two new populations of radio sources were recently identified: (a) compact and persistent sources (PRSs) associated with fast radio bursts (FRBs) in dwarf galaxies and (b) compact sources in dwarf galaxies that could belong to the long-sought population of intermediate-mass black holes. Despite the interesting aspects of these newly found sources, the current sample size is small, limiting scrutiny of the underlying population. Here, we present a search for compact radio sources coincident with dwarf galaxies. We search the LOFAR Two-meter Sky Survey (LoTSS), the most sensitive low-frequency (144 MHz central frequency) large-area survey for optically thin synchrotron emission to date. Exploiting the high spatial resolution (6 arcsec) and low astrometric uncertainty (~0.2 arcsec) of the LoTSS, we match its compact sources to the compiled sample of dwarf galaxies in the Census of the Local Universe, an H alpha survey with the Palomar Observatory 48 inch Samuel Oschin Telescope. We identify 29 over-luminous compact radio sources, evaluate the probability of chance alignment within the sample, investigate the potential nature of these sources, and evaluate their volumetric density and volumetric rate. While optical line-ratio diagnostics on the nebular lines from the host galaxies support a star-formation origin rather than an AGN origin, future high-angular-resolution radio data are necessary to ascertain the origin of the radio sources. We discuss planned strategies to differentiate between candidate FRB hosts and intermediate-mass black holes.

astro-ph.HE↗

arXiv2023

Searching for FRB persistent radio source counterparts in dwarf galaxies using LOFAR

The repeating FRB 20121102A was localized to a star-forming region in a dwarf galaxy and found to be co-located with a persistent radio source (PRS). FRB 20190520B is only the second known source sharing phenomenology akin to FRB 20121102A's, with similar burst activity, host galaxy properties, as well as being associated with a PRS. PRS emission is potentially a calorimeter, allowing us to estimate the energy output of the central FRB engine. Independently of FRB studies, PRSs have been found in dwarf galaxies and interpreted as intermediate mass black holes. To improve our understanding of such sources associated with dwarf galaxies, it is imperative to increase the known sample size. Here, we present a search for compact radio sources coincident with dwarf galaxies, discuss source candidates and planned strategies to differentiate them between candidate FRB hosts and intermediate mass black holes.

astro-ph.HE↗

arXiv2023

An interference detection strategy for Apertif based on AOFlagger 3

Context. Apertif is a multi-beam receiver system for the Westerbork Synthesis Radio Telescope that operates at 1.1-1.5 GHz, which overlaps with various radio services, resulting in contamination of astronomical signals with radio-frequency interference (RFI). Aims. We analyze approaches to mitigate Apertif interference and design an automated detection procedure for its imaging mode. Using this approach, we present long-term RFI detection results of over 300 Apertif observations. Methods. Our approach is based on the AOFlagger detection approach. We introduce several new features, including ways to deal with ranges of invalid data (e.g. caused by shadowing) in both the SumThreshold and scale-invariant rank operator steps; pre-calibration bandpass calibration; auto-correlation flagging; and HI flagging avoidance. These methods are implemented in a new framework that uses the Lua language for scripting, which is new in AOFlagger version 3. Results. Our approach removes RFI fully automatically, and is robust and effective enough for further calibration and (continuum) imaging of these data. Analysis of 304 observations show an average of 11.1% of lost data due to RFI with a large spread. We observe 14.6% RFI in auto-correlations. Computationally, AOFlagger achieves a throughput of 370 MB/s on a single computing node. Compared to published machine learning results, the method is one to two orders of magnitude faster.

astro-ph.IM↗

arXiv2022

First release of Apertif imaging survey data

(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface.

astro-ph.IM↗

arXiv2022

Continuum source catalog for the first APERTIF data release

The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates.

astro-ph.IM↗

arXiv2022

Characterising the Apertif primary beam response

Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.

astro-ph.IM↗

arXiv2022

The Apertif science verification campaign - Characteristics of polarised radio sources

We analyse five early science datasets from the APERture Tile in Focus (Apertif) phased array feed system to verify the polarisation capabilities of Apertif in view of future larger data releases. We aim to characterise the source population of the polarised sky in the L-Band using polarised source information in combination with IR and optical data. We use automatic routines to generate full field-of-view Q- and U-cubes and perform RM-Synthesis, source finding, and cross-matching with published radio, optical, and IR data to generate polarised source catalogues. SED-fitting routines were used to determine photometric redshifts, star-formation rates, and galaxy masses. IR colour information was used to classify sources as AGN or star-forming-dominated and early- or late-type. We surveyed an area of 56deg$^2$ and detected 1357 polarised source components in 1170 sources. The fraction of polarised sources is 10.57% with a median fractional polarisation of 4.70$\pm$0.14%. We confirmed the reliability of the Apertif measurements by comparing them with polarised cross-identified NVSS sources. Average RMs of the individual fields lie within the error of the best Milky Way foreground measurements. All of our polarised sources were found to be dominated by AGN activity in the radio regime with most of them being radio-loud (79%) and of the FRII class (87%). The host galaxies of our polarised source sample are dominated by intermediate disc and star-forming disc galaxies. The contribution of star formation to the radio emission is on the order of a few percent for $\approx$10% of the polarised sources while for $\approx$90% it is completely dominated by the AGN. We do not see any change in fractional polarisation for different star-formation rates of the AGN host galaxies.

astro-ph.GA↗

arXiv2021

Apercal -- The Apertif Calibration Pipeline

Apertif (APERture Tile In Focus) is one of the Square Kilometre Array (SKA) pathfinder facilities. The Apertif project is an upgrade to the 50-year-old Westerbork Synthesis Radio Telescope (WSRT) using phased-array feed technology. The new receivers create 40 individual beams on the sky, achieving an instantaneous sky coverage of 6.5 square degrees. The primary goal of the Apertif Imaging Survey is to perform a wide survey of 3500 square degrees (AWES) and a medium deep survey of 350 square degrees (AMES) of neutral atomic hydrogen (up to a redshift of 0.26), radio continuum emission and polarisation. Each survey pointing yields 4.6 TB of correlated data. The goal of Apercal is to process this data and fully automatically generate science ready data products for the astronomical community while keeping up with the survey observations. We make use of common astronomical software packages in combination with Python based routines and parallelisation. We use an object oriented module-based approach to ensure easy adaptation of the pipeline. A Jupyter notebook based framework allows user interaction and execution of individual modules as well as a full automatic processing of a complete survey observation. If nothing interrupts processing, we are able to reduce a single pointing survey observation on our five node cluster with 24 physical cores and 256 GB of memory each within 24h keeping up with the speed of the surveys. The quality of the generated images is sufficient for scientific usage for 44 % of the recorded data products with single images reaching dynamic ranges of several thousands. Future improvements will increase this percentage to over 80 %. Our design allowed development of the pipeline in parallel to the commissioning of the Apertif system.

astro-ph.IM↗

arXiv2021

Apertif, Phased Array Feeds for the Westerbork Synthesis Radio Telescope

We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams can be formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2 is being performed which will deliver both continuum and spectral line data sets, of which the first data has been publicly released. In addition, a time domain transient and pulsar survey covering 15,000 deg2 is in progress. An overview of the Apertif science drivers, hardware and software of the upgraded telescope is presented, along with its key performance characteristics.

astro-ph.IM↗