arXiv Science⌕ Search

arXiv subjects

D. Strom

Publications and source records attributed to D. Strom.

14 recordsLinked to original sources
arXiv2025

Performance of MAGIC stellar intensity interferometer and expansion to MAGIC + CTAO-LST1 stellar intensity interferometer

A new generation of optical intensity interferometers are emerging in recent years taking advantage of the existing infrastructure of Imaging Atmospheric Cherenkov Telescopes (IACTs). The MAGIC SII (Stellar Intensity Interferometer) in La Palma, Spain, has been operating since its first successful measurements in 2019 and its current design allows it to operate regularly. The current setup is ready to follow up on bright optical transients, as changing from regular gamma-ray observations to SII mode can be done in a matter of minutes. A paper studying the system performance, first measurements and future upgrades has been recently published. MAGIC SII's first scientific results are the measurement of the angular size of 22 stars, 13 of which with no previous measurements in the B band. More recently the Large Sized Telescope prototype from the Cherenkov Telescope Array Observatory (CTAOLST1) has been upgraded to operate together with MAGIC as a SII, leading to its first correlation measurements at the beginning of 2024. MAGIC+CTAO-LST1 SII will be further upgraded by adding the remaining CTAOLSTs at the north site to the system (which are foreseen to be built by the end of 2025). MAGIC+CTAO-LST1 SII shows a feasible technical solution to extend SII to the whole CTAO.

astro-ph.IM↗
arXiv2021

Simulating MADMAX in 3D: Requirements for Dielectric Axion Haloscopes

We present 3D calculations for dielectric haloscopes such as the currently envisioned MADMAX experiment. For ideal systems with perfectly flat, parallel and isotropic dielectric disks of finite diameter, we find that a geometrical form factor reduces the emitted power by up to $30\,\%$ compared to earlier 1D calculations. We derive the emitted beam shape, which is important for antenna design. We show that realistic dark matter axion velocities of $10^{-3} c$ and inhomogeneities of the external magnetic field at the scale of $10\,\%$ have negligible impact on the sensitivity of MADMAX. We investigate design requirements for which the emitted power changes by less than $20\,\%$ for a benchmark boost factor with a bandwidth of $50\,{\rm MHz}$ at $22\,{\rm GHz}$, corresponding to an axion mass of $90\,\mu{\rm eV}$. We find that the maximum allowed disk tilt is $100\,\mu{\rm m}$ divided by the disk diameter, the required disk planarity is $20\,\mu{\rm m}$ (min-to-max) or better, and the maximum allowed surface roughness is $100\,\mu{\rm m}$ (min-to-max). We show how using tiled dielectric disks glued together from multiple smaller patches can affect the beam shape and antenna coupling.

hep-ex↗
arXiv2020

MADMAX Status Report

In this report we present the status of the MAgnetized Disk and Mirror Axion eXperiment (MADMAX), the first dielectric haloscope for the direct search of dark matter axions in the mass range of 40 to 400 $\mu$eV. MADMAX will consist of several parallel dielectric disks, which are placed in a strong magnetic field and with adjustable separations. This setting is expected to allow for an observable emission of axion induced electromagnetic waves at a frequency between 10 and 100 GHz corresponding to the axion mass. The present document orignated from a status report to the DESY PRC in 2019.

physics.ins-det↗
arXiv2017

SENSE: A comparison of photon detection efficiency and optical crosstalk of various SiPM devices

This paper describes a comparison of photon detection efficiency and optical crosstalk measurements performed by three partners: Geneva University, Catania Observatory and Nagoya University. The measurements were compared for three different SiPM devices with different active areas: from 9 $mm^2$ up to 93.6 $mm^2$ produced by Hamamatsu. The objective of this work is to establish the measurements and analysis procedures for calculating the main SiPM parameters and their precision. This work was done in the scope of SENSE project which aims to build roadmap for the last developments in field of sensors for low light level detection.

physics.ins-det↗
arXiv2014

Observation of the rare $B^0_s\to\mu^+\mu^-$ decay from the combined analysis of CMS and LHCb data

A joint measurement is presented of the branching fractions $B^0_s\to\mu^+\mu^-$ and $B^0\to\mu^+\mu^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\to\mu^+\mu^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\to\mu^+\mu^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.

hep-ex↗
arXiv2013

Boosted objects and jet substructure at the LHC

This report of the BOOST2012 workshop presents the results of four working groups that studied key aspects of jet substructure. We discuss the potential of the description of jet substructure in first-principle QCD calculations and study the accuracy of state-of-the-art Monte Carlo tools. Experimental limitations of the ability to resolve substructure are evaluated, with a focus on the impact of additional proton proton collisions on jet substructure performance in future LHC operating scenarios. A final section summarizes the lessons learnt during the deployment of substructure analyses in searches for new physics in the production of boosted top quarks.

hep-ex↗
arXiv2011

Development of Readout Interconnections for the Si-W Calorimeter of SiD

The SiD collaboration is developing a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including oxidation removal processes, pad surface preparation, solder ball selection and placement, and bond quality assurance. Our results show that solder ball bonding is a promising technique for the Si-W ECAL, and unresolved issues are being addressed.

physics.ins-det↗
arXiv2011

Chronopixel Vertex Detectors for Future Linear Colliders

Over the past few years we have developed, in collaboration with the SARNOFF Corporation, a design of a Monolithic CMOS Pixel Detector for ILC Vertex Detectors. The unique feature of this design is that each hit is accompanied by a time tag with sufficient precision to assign each hit to a particular bunch crossing of the ILC (thus the name Chronopixel). This reduces the occupancy even in the innermost Vertex Detector layer to negligible levels, allowing a robust Vertex Detector even in the case that the backgrounds in the ILC are higher than presently estimated.

physics.ins-det↗
arXiv2009

The Layer 0 Inner Silicon Detector of the D0 Experiment

This paper describes the design, fabrication, installation and performance of the new inner layer called Layer 0 (L0) that was inserted in the existing Run IIa Silicon Micro-Strip Tracker (SMT) of the D0 experiment at the Fermilab Tevatron collider. L0 provides tracking information from two layers of sensors, which are mounted with center lines at a radial distance of 16.1 mm and 17.6 mm respectively from the beam axis. The sensors and readout electronics are mounted on a specially designed and fabricated carbon fiber structure that includes cooling for sensor and readout electronics. The structure has a thin polyimide circuit bonded to it so that the circuit couples electrically to the carbon fiber allowing the support structure to be used both for detector grounding and a low impedance connection between the remotely mounted hybrids and the sensors.

physics.ins-det↗
arXiv2009

Status of the Chronopixel Project

Other the past few years we have developed a monolithic CMOS pixel detector design for the ILC in collaboration with the SARNOFF Corporation. The unique feature of this design is the recorded time tag for each hit, allowing assignment of the hit to a particular bunch crossing (thus the name Chronopixel). The prototype design was completed in 2007. The first set of prototype devices was fabricated in 2008. We have developed a detailed testing plan and have designed the test electronics in collaboration with SLAC. Testing is expected to start early in 2009.

physics.ins-det↗
arXiv2008

Tau trigger at the ATLAS experiment

Many theoretical models, like the Standard Model or SUSY at large tan(beta), predict Higgs bosons or new particles which decay more abundantly to final states including tau leptons than to other leptons. At the energy scale of the LHC, the identification of tau leptons, in particular in the hadronic decay mode, will be a challenging task due to an overwhelming QCD background which gives rise to jets of particles that can be hard to distinguish from hadronic tau decays. Equipped with excellent tracking and calorimetry, the ATLAS experiment has developed tau identification tools capable of working at the trigger level. This contribution presents tau trigger algorithms which exploit the main features of hadronic tau decays and describes the current tau trigger commissioning activities.

hep-ex↗
arXiv2002

Performance of the OPAL Si-W luminometer at LEP I-II

A pair of compact Silicon-Tungsten calorimeters was operated in the OPAL experiment at LEP to measure the integrated luminosity from detection of Bhabha electrons scattered at angles between 25 and 58 mrad from the beam line. In the eight years from 1993 to 2000 the detector worked first at the Z mass peak and then at center of mass energies up to 209 GeV. The fine radial and longitudinal segmentation (2.5mm x 1X0) allowed the radial position of electron and photon showers to be measured with a resolution of 130-170 microns and a residual radial bias as small as 7 microns. Reducing the bias in the definition of the inner acceptance radius was the key element in obtaining an experimental systematic error on the integrated luminosity of only 3.4 10^-4. The performance of the detector at both LEP-I and LEP-II is reviewed. Energy resolution, sensitivity to overlapping electromagnetic showers and sensitivity to minimum ionizing particles are discussed.

hep-ex↗
arXiv1996

Anomalous Gauge Boson Couplings

The measurement of anomalous gauge boson self couplings is reviewed for a variety of present and planned accelerators. Sensitivities are compared for these accelerators using models based on the effective Lagrangian approach. The sensitivities described here are for measurement of generic parameters kappa_v, lambda_v, etc., defined in the text. Pre-LHC measurements will not probe these couplings to precision better than O(1/10). The LHC should be sensitive to better than O(1/100), while a future NLC should achieve sensitivity of O(1/1000) to O(1/10000) for center of mass energies ranging from 0.5 to 1.5 TeV.

hep-ph↗