arXiv subjects

D. Harrison

Publications and source records attributed to D. Harrison.

At least 19 recordsLinked to original sources

arXiv2017

H4-Alkanes: A new class of hydrogen storage material?

The methane-based material (H$_2$)$_4$CH$_4$, also called H4M for short, is in essence a methane molecule with 4 physisorbed H$_2$ molecules. While H4M has exceptionally high hydrogen storage densities when it forms a molecular solid, unfortunately, this solid is only stable at impractically high pressures and/or low temperatures. To overcome this limitation, we show through simulations that longer alkanes (methane is the shortest alkane) also form stable structures that still physisorb 4 H$_2$ molecules per carbon atom; we call those structures H4-alkanes. We further show via molecular dynamics simulations that the stability field of molecular solids formed from H4-alkanes increases remarkably with chain length compared to H4M, just as it does for regular alkanes. From our simulations of H4-alkanes with lengths 1, 4, 10, and 20, we see that e.g. for the 20-carbon the stability field is doubled at higher pressures. While even longer chains show only insignificant improvements, we discuss various other options to stabilize H4-alkanes more. Our proof-of-principle results lay the groundwork to show that H4-alkanes can become viable hydrogen storage materials.

cond-mat.mtrl-sci↗

arXiv2016

Suppressing diborane production during the hydrogen release of metal borohydrides: The example of alloyed Al(BH$_4$)$_3$

Aluminum borohydride (Al(BH$_4$)$_3$) is an example of a promising hydrogen storage material with exceptional hydrogen densities by weight and volume and a low hydrogen desorption temperature. But, unfortunately, its production of diborane (B$_2$H$_6$) gases upon heating to release the hydrogen restricts its practical use. To elucidate this issue, we investigate the properties of a number of metal borohydrides with the same problem and find that the electronegativity of the metal cation is not the best descriptor of diborane production. We show that, instead, the closely related formation enthalpy is a better descriptor and we find that diborane production is an exponential function thereof. We conclude that diborane production is sufficiently suppressed for formation enthalpies of $-$80 kJ/mol BH$_4$ or lower, providing specific design guidelines to tune existing metal borohydrides or synthesize new ones. We then use first-principles methods to study the effects of Sc alloying in Al(BH$_4$)$_3$. Our results for the thermodynamic properties of the Al$_{1-x}$Sc$_x$(BH$_4$)$_3$ alloy clearly show the stabilizing effect of Sc alloying and thus the suppression of diborane production. We conclude that stabilizing Al(BH$_4$)$_3$ and similar borohydrides via alloying or other means is a promising route to suppress diborane production and thus develop viable hydrogen storage materials.

cond-mat.mtrl-sci↗

arXiv2014

Tuning the hydrogen desorption of Mg(BH$_4$)$_2$ through Zn alloying

We study the effect of Zn alloying on the hydrogen desorption properties of Mg(BH$_4$)$_2$ using $\it{ab\ initio}$ simulations. In particular, we investigate formation/reaction enthalpies/entropies for a number of compounds and reactions at a wide range of temperatures and Zn concentrations in Mg$_{1-x}$Zn$_x$(BH$_4$)$_2$. Our results show that the thermodynamic stability of the resulting material can be significantly lowered through Zn alloying. We find that e.g. the solid solution Mg$_{2/3}$Zn$_{1/3}$(BH$_4$)$_2$ has a reaction enthalpy for the complete hydrogen desorption of only 25.3 kJ/mol H$_2$$-$a lowering of 15 kJ/mol H$_2$ compared to the pure phase and a corresponding lowering in critical temperature of 123 K. In addition, we find that the enthalpy of mixing is rather small and show that the decrease in reaction enthalpy with Zn concentration is approximately linear.

cond-mat.mtrl-sci↗

arXiv2014

Radio-Gamma-ray connection and spectral evolution in 4C +49.22 (S4 1150+49): the Fermi, Swift and Planck view

The Large Area Telescope on board the Fermi Gamma-ray Space Telescope detected a strong gamma-ray flare on 2011 May 15 from a source identified as 4C 49.22, a flat spectrum radio quasar also known as S4 1150+49. This blazar, characterised by a prominent radio-optical-X-ray jet, was in a low gamma-ray activity state during the first years of Fermi observations. Simultaneous observations during the quiescent, outburst and post-flare gamma-ray states were obtained by Swift, Planck and optical-IR-radio telescopes (INAOE, Catalina CSS, VLBA, Metsahovi). The flare is observed from microwave to X-ray bands with correlated variability and the Fermi, Swift and Planck data for this FSRQ show some features more typical of BL Lac objects, like the synchrotron peak in the optical band that outshines the thermal blue-bump emission, and the X-ray spectral softening. Multi-epoch VLBA observations show the ejection of a new component close in time with the GeV gamma-ray flare. The radio-to-gamma-ray spectral energy distribution is modeled and fitted successfully for the outburst and the post-flare epochs using either a single flaring blob with two emission processes (synchrotron self Compton, and external-radiation Compton), and a two-zone model with SSC-only mechanism.

astro-ph.HE↗

arXiv2014

Comparison of Sunyaev-Zel'dovich measurements from Planck and from the Arcminute Microkelvin Imager for 99 galaxy clusters

We present observations and analysis of a sample of 123 galaxy clusters from the 2013 Planck catalogue of Sunyaev-Zel'dovich sources with the Arcminute Microkelvin Imager (AMI), a ground-based radio interferometer. AMI provides an independent measurement with higher angular resolution, 3 arcmin compared to the Planck beams of 5-10 arcmin. The AMI observations thus provide validation of the cluster detections, improved positional estimates, and a consistency check on the fitted 'size' ($\theta_{s}$) and 'flux' ($Y_{\rm tot}$) parameters in the Generalised Navarro, Frenk and White (GNFW) model. We detect 99 of the clusters. We use the AMI positional estimates to check the positional estimates and error-bars produced by the Planck algorithms PowellSnakes and MMF3. We find that $Y_{\rm tot}$ values as measured by AMI are biased downwards with respect to the Planck constraints, especially for high Planck-SNR clusters. We perform simulations to show that this can be explained by deviation from the 'universal' pressure profile shape used to model the clusters. We show that AMI data can constrain the $\alpha$ and $\beta$ parameters describing the shape of the profile in the GNFW model for individual clusters provided careful attention is paid to the degeneracies between parameters, but one requires information on a wider range of angular scales than are present in AMI data alone to correctly constrain all parameters simultaneously.

astro-ph.CO↗

arXiv2013

Planck intermediate results. XVI. Profile likelihoods for cosmological parameters

We explore the 2013 Planck likelihood function with a high-precision multi-dimensional minimizer (Minuit). This allows a refinement of the Lambda-cdm best-fit solution with respect to previously-released results, and the construction of frequentist confidence intervals using profile likelihoods. The agreement with the cosmological results from the Bayesian framework is excellent, demonstrating the robustness of the Planck results to the statistical methodology. We investigate the inclusion of neutrino masses, where more significant differences may appear due to the non-Gaussian nature of the posterior mass distribution. By applying the Feldman--Cousins prescription, we again obtain results very similar to those of the Bayesian methodology. However, the profile-likelihood analysis of the CMB combination (Planck+WP+highL) reveals a minimum well within the unphysical negative-mass region. We show that inclusion of the Planck CMB-lensing information regularizes this issue, and provide a robust frequentist upper limit $M_\nu < 0.26 eV$ ($95%$ confidence) from the CMB+lensing+BAO data combination.

astro-ph.CO↗

arXiv2013

Planck intermediate results. XV. A study of anomalous microwave emission in Galactic clouds

Anomalous microwave emission (AME) is believed to be due to electric dipole radiation from small spinning dust grains. The aim of this paper is a statistical study of the basic properties of AME regions and the environment in which they emit. We used WMAP and Planck maps, combined with ancillary radio and IR data, to construct a sample of 98 candidate AME sources, assembling SEDs for each source using aperture photometry on 1deg-smoothed maps from 0.408 GHz up to 3000 GHz. Each spectrum is fitted with a simple model of free-free, synchrotron (where necessary), cosmic microwave background (CMB), thermal dust, and spinning dust components. We find that 42 of the 98 sources have significant (>5sigma) excess emission at frequencies between 20 and 60 GHz. An analysis of the potential contribution of optically thick free-free emission from ultra-compact HII regions, using IR colour criteria, reduces the significant AME sample to 27 regions. The spectrum of the AME is consistent with model spectra of spinning dust. The AME regions tend to be more spatially extended than regions with little or no AME. The AME intensity is strongly correlated with the submillimetre/IR flux densities and comparable to previous AME detections in the literature. AME emissivity, defined as the ratio of AME to dust optical depth, varies by an order of magnitude for the AME regions. The AME regions tend to be associated with cooler dust in the range 14-20 K and an average emissivity index of +1.8, while the non-AME regions are typically warmer, at 20-27 K. In agreement with previous studies, the AME emissivity appears to decrease with increasing column density. The emerging picture is that the bulk of the AME is coming from the polycyclic aromatic hydrocarbons and small dust grains from the colder neutral interstellar medium phase (Abridged).

astro-ph.GA↗

arXiv2013

Planck 2013 results. XXX. Cosmic infrared background measurements and implications for star formation

We present new measurements of CIB anisotropies using Planck. Combining HFI data with IRAS, the angular auto- and cross frequency power spectrum is measured from 143 to 3000 GHz, and the auto-bispectrum from 217 to 545 GHz. The total areas used to compute the CIB power spectrum and bispectrum are about 2240 and 4400 deg^2, respectively. After careful removal of the contaminants, and a complete study of systematics, the CIB power spectrum and bispectrum are measured with unprecedented signal to noise ratio from angular multipoles ell~150 to 2500, and ell~130 to 1100, respectively. Two approaches are developed for modelling CIB power spectrum anisotropies. The first approach takes advantage of the unique measurements by Planck at large angular scales, and models only the linear part of the power spectrum, with a mean bias of dark matter halos hosting dusty galaxies at a given redshift weighted by their contribution to the emissivities. The second approach is based on a model that associates star-forming galaxies with dark matter halos and their subhalos, using a parametrized relation between the dust-processed infrared luminosity and (sub-)halo mass. The two approaches simultaneously fit all auto- and cross- power spectra very well. We find that the star formation history is well constrained up to z~2. However, at higher redshift, the accuracy of the star formation history measurement is strongly degraded by the uncertainty in the spectral energy distribution of CIB galaxies. We also find that CIB galaxies have warmer temperatures as redshift increases. The CIB bispectrum is steeper than that expected from the power spectrum, although well fitted by a power law; this gives some information about the contribution of massive halos to the CIB bispectrum.

astro-ph.CO↗

arXiv2013

Planck intermediate results. XIV. Dust emission at millimetre wavelengths in the Galactic plane

We use Planck HFI data combined with ancillary radio data to study the emissivity index of the interstellar dust emission in the frequency range 10 - 353 GHz, or 3 - 0.8 mm, in the Galactic plane. We analyse the region l=20 degr - 44 degr and |b| \leq 4 degr where the free-free emission can be estimated from radio recombination line data. We fit the spectra at each sky pixel with a modified blackbody model and two spectral indices, beta_mm and beta_FIR, below and above 353 GHz respectively. We find that beta_mm is smaller than beta_FIR and we detect a correlation between this low frequency power-law index and the dust optical depth at 353 GHz, tau_353. The opacity spectral index beta_mm increases from about 1.54 in the more diffuse regions of the Galactic disk, |b| = 3 degr - 4 degr and tau_353 ~ 5 x 10^{-5}, to about 1.66 in the densest regions with an optical depth of more than one order of magnitude higher. We associate this correlation with an evolution of the dust emissivity related to the fraction of molecular gas along the line of sight. This translates into beta_mm ~ 1.54 for a medium that is mostly atomic and beta_mm ~ 1.66 when the medium is dominated by molecular gas. We find that both the Two-Level System model and the emission by ferromagnetic particles can explain the results. The results improve our understanding of the physics of interstellar dust and lead towards a complete model of the dust spectrum of the Milky Way from far-infrared to millimetre wavelengths.

astro-ph.GA↗

arXiv2013

Planck intermediate results. XIII. Constraints on peculiar velocities

Using \Planck\ data combined with the Meta Catalogue of X-ray detected Clusters of galaxies (MCXC), we address the study of peculiar motions by searching for evidence of the kinetic Sunyaev-Zeldovich effect (kSZ). By implementing various filters designed to extract the kSZ generated at the positions of the clusters, we obtain consistent constraints on the radial peculiar velocity average, root mean square (rms), and local bulk flow amplitude at different depths. For the whole cluster sample of average redshift 0.18, the measured average radial peculiar velocity with respect to the cosmic microwave background (CMB) radiation at that redshift, i.e., the kSZ monopole, amounts to $72 \pm 60$ km s$^{-1}$. This constitutes less than 1% of the relative Hubble velocity of the cluster sample with respect to our local CMB frame. While the linear $\Lambda$CDM prediction for the typical cluster radial velocity rms at $z=0.15$ is close to 230km s$^{-1}$, the upper limit imposed by \Planck\ data on the cluster subsample corresponds to 800 km s$^{-1}$ at 95% confidence level, i.e., about three times higher. \Planck\ data also set strong constraints on the local bulk flow in volumes centred on the Local Group. There is no detection of bulk flow as measured in any comoving sphere extending to the maximum redshift covered by the cluster sample. A blind search for bulk flows in this sample has an upper limit of 254 km s$^{-1}$ (95% confidence level) dominated by CMB confusion and instrumental noise, indicating that the Universe is largely homogeneous on Gpc scales. In this context, in conjunction with supernova observations, \Planck\ is able to rule out a large class of inhomogeneous void models as alternatives to dark energy or modified gravity. The \Planck\ constraints on peculiar velocities and bulk flows are thus consistent with the $\Lambda$CDM scenario.

astro-ph.CO↗

arXiv2013

Planck 2013 results. XX. Cosmology from Sunyaev-Zeldovich cluster counts

We present constraints on cosmological parameters using number counts as a function of redshift for a sub-sample of 189 galaxy clusters from the Planck SZ (PSZ) catalogue. The PSZ is selected through the signature of the Sunyaev--Zeldovich (SZ) effect, and the sub-sample used here has a signal-to-noise threshold of seven, with each object confirmed as a cluster and all but one with a redshift estimate. We discuss the completeness of the sample and our construction of a likelihood analysis. Using a relation between mass $M$ and SZ signal $Y$ calibrated to X-ray measurements, we derive constraints on the power spectrum amplitude $\sigma_8$ and matter density parameter $\Omega_{\mathrm{m}}$ in a flat $\Lambda$CDM model. We test the robustness of our estimates and find that possible biases in the $Y$--$M$ relation and the halo mass function are larger than the statistical uncertainties from the cluster sample. Assuming the X-ray determined mass to be biased low relative to the true mass by between zero and 30%, motivated by comparison of the observed mass scaling relations to those from a set of numerical simulations, we find that $\sigma_8=0.75\pm 0.03$, $\Omega_{\mathrm{m}}=0.29\pm 0.02$, and $\sigma_8(\Omega_{\mathrm{m}}/0.27)^{0.3} = 0.764 \pm 0.025$. The value of $\sigma_8$ is degenerate with the mass bias; if the latter is fixed to a value of 20% we find $\sigma_8(\Omega_{\mathrm{m}}/0.27)^{0.3}=0.78\pm 0.01$ and a tighter one-dimensional range $\sigma_8=0.77\pm 0.02$. We find that the larger values of $\sigma_8$ and $\Omega_{\mathrm{m}}$ preferred by Planck's measurements of the primary CMB anisotropies can be accommodated by a mass bias of about 40%. Alternatively, consistency with the primary CMB constraints can be achieved by inclusion of processes that suppress power on small scales relative to the $\Lambda$CDM model, such as a component of massive neutrinos (abridged).

astro-ph.CO↗

arXiv2013

Planck 2013 results. XXI. All-sky Compton parameter power spectrum and high-order statistics

We have constructed the first all-sky map of the thermal Sunyaev-Zeldovich (tSZ) effect by applying specifically tailored component separation algorithms to the 100 to 857 GHz frequency channel maps from the Planck survey. These maps show an obvious galaxy cluster tSZ signal that is well matched with blindly detected clusters in the Planck SZ catalogue. To characterize the signal in the tSZ map we have computed its angular power spectrum. At large angular scales ($\ell < 60$), the major foreground contaminant is the diffuse thermal dust emission. At small angular scales ($\ell > 500$) the clustered Cosmic Infrared Background (CIB) and residual point sources are the major contaminants. These foregrounds are carefully modelled and subtracted. We measure the tSZ power spectrum in angular scales, $0.17^{\circ} \lesssim \theta \lesssim 3.0^{\circ}$, that were previously unexplored. The measured tSZ power spectrum is consistent with that expected from the Planck catalogue of SZ sources, with additional clear evidence of signal from unresolved clusters and, potentially, diffuse warm baryons. We use the tSZ power spectrum to obtain the following cosmological constraints: $\sigma_8(\Omega_{\mathrm{m}}/0.28)^{3.2/8.1}=0.784 \pm 0.016 (68% C.L.). Marginalized band-powers of the Planck tSZ power spectrum and the best-fit model are given. The non-Gaussianity of the Compton parameter map is further characterized by computing its 1D probability distribution function and its bispectrum. These are used to place additional independent constraints on $\sigma_{8}$.

astro-ph.CO↗

arXiv2013

Planck 2013 results. XXVIII. The Planck Catalogue of Compact Sources

The Planck Catalogue of Compact Sources (PCCS) is the catalogue of sources detected in the first 15 months of Planck operations, the "nominal" mission. It consists of nine single-frequency catalogues of compact sources, both Galactic and extragalactic, detected over the entire sky. The PCCS covers the frequency range 30--857\,GHz with higher sensitivity (it is 90% complete at 180 mJy in the best channel) and better angular resolution (from ~33' to ~5') than previous all-sky surveys in this frequency band. By construction its reliability is >80% and more than 65% of the sources have been detected at least in two contiguous Planck channels. In this paper we present the construction and validation of the PCCS, its contents and its statistical characterization.

astro-ph.CO↗

arXiv2013

Planck 2013 results. XIX. The integrated Sachs-Wolfe effect

Based on CMB maps from the 2013 Planck Mission data release, this paper presents the detection of the ISW effect, i.e., the correlation between the CMB and large-scale evolving gravitational potentials. The significance of detection ranges from 2 to 4 sigma, depending on which method is used. We investigate three separate approaches, which cover essentially all previous studies, as well as breaking new ground. (i) Correlation of the CMB with the Planck reconstructed gravitational lensing potential (for the first time). This detection is made using the lensing-induced bispectrum; the correlation between lensing and the ISW effect has a significance close to 2.5 sigma. (ii) Cross-correlation with tracers of LSS, yielding around 3 sigma significance, based on a combination of radio (NVSS) and optical (SDSS) data. (iii) Aperture photometry on stacked CMB fields at the locations of known large-scale structures, which yields a 4 sigma signal when using a previously explored catalogue, but shows strong discrepancies in amplitude and scale compared to expectations. More recent catalogues give more moderate results, ranging from negligible to 2.5 sigma at most, but with a more consistent scale and amplitude, the latter being still slightly above what is expected from numerical simulations within LCMD. Where they can be compared, these measurements are compatible with previous work using data from WMAP, which had already mapped these scales to the limits of cosmic variance. Planck's broader frequency coverage confirms that the signal is achromatic, bolstering the case for ISW detection. As a final step we use tracers of large-scale structure to filter the CMB data, presenting maps of the ISW temperature perturbation. These results provide complementary and independent evidence for the existence of a dark energy component that governs the current accelerated expansion of the Universe.

astro-ph.CO↗

arXiv2013

Planck 2013 results. V. LFI calibration

We discuss the methods employed to photometrically calibrate the data acquired by the Low Frequency Instrument on Planck. Our calibration is based on a combination of the Orbital Dipole plus the Solar Dipole, caused respectively by the motion of the Planck spacecraft with respect to the Sun and by motion of the Solar System with respect to the CMB rest frame. The latter provides a signal of a few mK with the same spectrum as the CMB anisotropies and is visible throughout the mission. In this data release we rely on the characterization of the Solar Dipole as measured by WMAP. We also present preliminary results (at 44GHz only) on the study of the Orbital Dipole, which agree with the WMAP value of the Solar System speed within our uncertainties. We compute the calibration constant for each radiometer roughly once per hour, in order to keep track of changes in the detectors' gain. Since non-idealities in the optical response of the beams proved to be important, we implemented a fast convolution algorithm which considers the full beam response in estimating the signal generated by the dipole. Moreover, in order to further reduce the impact of residual systematics due to sidelobes, we estimated time variations in the calibration constant of the 30GHz radiometers (the ones with the largest sidelobes) using the signal of a reference load. We have estimated the calibration accuracy in two ways: we have run a set of simulations to assess the impact of statistical errors and systematic effects in the instrument and in the calibration procedure, and we have performed a number of consistency checks on the data and on the brightness temperature of Jupiter. Calibration errors for this data release are expected to be about 0.6% at 44 and 70 GHz, and 0.8% at 30 GHz. (Abriged.)

astro-ph.IM↗

arXiv2013

Planck 2013 results. IX. HFI spectral response

The Planck High Frequency Instrument (HFI) spectral response was determined through a series of ground based tests conducted with the HFI focal plane in a cryogenic environment prior to launch. The main goal of the spectral transmission tests was to measure the relative spectral response (including out-of-band signal rejection) of all HFI detectors. This was determined by measuring the output of a continuously scanned Fourier transform spectrometer coupled with all HFI detectors. As there is no on-board spectrometer within HFI, the ground-based spectral response experiments provide the definitive data set for the relative spectral calibration of the HFI. The spectral response of the HFI is used in Planck data analysis and component separation, this includes extraction of CO emission observed within Planck bands, dust emission, Sunyaev-Zeldovich sources, and intensity to polarization leakage. The HFI spectral response data have also been used to provide unit conversion and colour correction analysis tools. Verifications of the HFI spectral response data are provided through comparisons with photometric HFI flight data. This validation includes use of HFI zodiacal emission observations to demonstrate out-of-band spectral signal rejection better than 10^8. The accuracy of the HFI relative spectral response data is verified through comparison with complementary flight-data based unit conversion coefficients and colour correction coefficients. These coefficients include those based upon HFI observations of CO, dust, and Sunyaev-Zeldovich emission. General agreement is observed between the ground-based spectral characterization of HFI and corresponding in-flight observations, within the quoted uncertainty of each; explanations are provided for any discrepancies.

astro-ph.IM↗

arXiv2013

Planck 2013 results. VII. HFI time response and beams

This paper characterizes the effective beams,the effective beam window functions and the associated errors for the Planck HFI detectors. The effective beam is the angular response including the effect of the optics,detectors,data processing and the scan strategy. The window function is the representation of this beam in the harmonic domain which is required to recover an unbiased measurement of the CMB angular power spectrum. The HFI is a scanning instrument and its effective beams are the convolution of: (a) the optical response of the telescope and feeds;(b)the processing of the time-ordered data and deconvolution of the bolometric and electronic time response; and (c) the merging of several surveys to produce maps. The time response functions are measured using observations of Jupiter and Saturn and by minimizing survey difference residuals. The scanning beam is the post-deconvolution angular response of the instrument, and is characterized with observations of Mars. The main beam solid angles are determined to better than 0.5% at each HFI frequency band. Observations of Jupiter and Saturn limit near sidelobes (within 5deg) to about 0.1% of the total solid angle. Time response residuals remain as long tails in the scanning beams, but contribute less than 0.1% of the total. The bias and uncertainty in the beam products are estimated using ensembles of simulated planet observations that include the impact of instrumental noise and known systematic effects.The correlation structure of these ensembles is well-described by five error eigenmodes that are sub-dominant to sample variance and instrumental noise in the harmonic domain. A suite of consistency tests provide confidence that the error model represents a sufficient description of the data. The total error in the effective beam window functions is below 1% at 100GHz up to ell~1500$,and below 0.5% at 143 and 217GHz up to ~2000.

astro-ph.IM↗

arXiv2013

Planck 2013 results. VIII. HFI photometric calibration and mapmaking

This paper describes the processing applied to the HFI cleaned time-ordered data to produce photometrically calibrated maps. HFI observes the sky over a broad range of frequencies, from 100 to 857 GHz. To get the best accuracy on the calibration on such a large range, two different photometric calibration schemes have to be used. The 545 and 857 \GHz\ data are calibrated using Uranus and Neptune flux density measurements, compared with models of their atmospheric emissions to calibrate the data. The lower frequencies (below 353 GHz) are calibrated using the cosmological microwave background dipole.One of the components of this anisotropy results from the orbital motion of the satellite in the Solar System, and is therefore time-variable. Photometric calibration is thus tightly linked to mapmaking, which also addresses low frequency noise removal. The 2013 released HFI data show some evidence for apparent gain variations of the HFI bolometers' detection chain. These variations were identified by comparing observations taken more than one year apart in the same configuration. We developed an effective correction to limit its effect on calibration, and assess its accuracy. We present several methods used to estimate the precision of the photometric calibration. We distinguish relative (from one detector to another, or from one frequency to another) and absolute uncertainties. In both cases, we found that these uncertainties range from a few $10^{-3}$ to several per cents from 100 to 857 GHz. We describe the pipeline producing the maps from the HFI timelines, based on the photometric calibration parameters and we detail the scheme used to a posteriori set the zero level of the maps. We also briefly discuss the cross-calibration between HFI and the SPIRE instrument on board Herschel. We finally summarize the basic characteristics of the set of the HFI maps from the 2013 Planck data release.

astro-ph.CO↗