arXiv subjects

Constantino Álvarez Casado

Publications and source records attributed to Constantino Álvarez Casado.

At least 19 recordsLinked to original sources

arXiv2026

Selfie-Capture Dynamics as an Auxiliary Signal Against Deepfakes and Injection Attacks for Mobile Identity Verification

Mobile remote identity verification (RIdV) systems are exposed to attacks that manipulate or replace the facial video stream, including presentation attacks, real-time deepfakes, and video injection. Recent European requirements, including ETSI TS 119 461 and CEN/TS 18099, motivate evidence channels beyond camera-based presentation-attack detection. This paper studies whether passive motion traces recorded during selfie capture provide auxiliary evidence for spoof screening and user verification. We introduce CanSelfie, a dataset of 375 bona fide multi-sensor sequences collected at 50 Hz from 30 participants using a commercial mobile RIdV application, together with stationary, handheld, and temporally shifted attack-proxy scenarios. We benchmark 7 multivariate time-series classifiers and 8 whole-series anomaly detectors across sensor configurations and temporal windows. For spoof screening, accelerometer-only ROCKAD obtains 0.00% FRR and 43.8% FAR, while QUANT+3-NN obtains the lowest FAR of 32.0% at 2.37% FRR; both reject all stationary proxies. For same-device and same-session user verification, WEASEL+MUSE reaches 1.07% EER using 9 channels. Raw acceleration is the most informative modality, and closed-set accuracy alone does not imply good verification because threshold calibration depends on score distributions. The findings support selfie-capture motion as a low-friction auxiliary signal, while leaving cross-device, cross-session, and real injection-attack evaluation as necessary next steps. Code and data available at: https://github.com/Ergzar/Selfie-Motion-AD-TSC.

cs.CR↗

arXiv2026

Thermal Imaging for Contactless Cardiorespiratory and Sudomotor Response Monitoring

Human-machine interfaces in industrial automation need sensing modules that monitor operator actions and physiological state. This is important in factories, vehicles, machinery cabins, and human-robot collaboration, where workload, stress, fatigue, or reduced attention can affect safety. RGB monitoring is limited by low light, shadows, and privacy concerns, while thermal infrared imaging captures skin temperature dynamics without visible illumination. This paper studies thermal video as a contactless computer vision modality for estimating electrodermal activity (EDA), heart rate (HR), and breathing rate (BR), with the goal of supporting adaptive human-machine interfaces and operator-state awareness. We propose a signal-processing pipeline that tracks facial regions, aggregates thermal signals, and separates slow sudomotor trends from faster cardiorespiratory components. HR is estimated using orthogonal matrix image transformation (OMIT) across multiple facial regions, while BR is estimated from nasal and cheek thermal signals using spectral peak detection. We characterize 288 ROI-method configurations against contact references with lag-tolerant metrics using 31 sessions from the public SIMULATOR STUDY 1 (SIM1) driver monitoring dataset. The best fixed EDA configuration reaches a mean absolute correlation of $0.40 \pm 0.23$ against palm EDA, with individual sessions reaching $0.89$. BR estimation achieves $3.1 \pm 1.1$ bpm mean absolute error, while HR estimation yields $13.8 \pm 7.5$ bpm MAE, limited by the $7.5$ Hz thermal camera frame rate. The results show that thermal video provides useful respiratory and sudomotor cues, while revealing limitations caused by ROI selection, polarity changes, latency, and subject variability. These findings provide baseline design guidance for thermal computer vision as an auxiliary sensing layer in adaptive industrial HMI systems.

cs.CV↗

arXiv2025

From Theory to Throughput: CUDA-Optimized APML for Large-Batch 3D Learning

Loss functions are fundamental to learning accurate 3D point cloud models, yet common choices trade geometric fidelity for computational cost. Chamfer Distance is efficient but permits many-to-one correspondences, while Earth Mover Distance better reflects one-to-one transport at high computational cost. APML approximates transport with differentiable Sinkhorn iterations and an analytically derived temperature, but its dense formulation scales quadratically in memory. We present CUDA-APML, a sparse GPU implementation that thresholds negligible assignments and runs adaptive softmax, bidirectional symmetrization, and Sinkhorn normalization directly in COO form. This yields near-linear memory scaling and preserves gradients on the stored support, while pairwise distance evaluation remains quadratic in the current implementation. On ShapeNet and MM-Fi, CUDA-APML matches dense APML within a small tolerance while reducing peak GPU memory by 99.9%. Code available at: https://github.com/Multimodal-Sensing-Lab/apml

cs.LG↗

arXiv2025

Quality-Aware Framework for Video-Derived Respiratory Signals

Video-based respiratory rate (RR) estimation is often unreliable due to inconsistent signal quality across extraction methods. We present a predictive, quality-aware framework that integrates heterogeneous signal sources with dynamic assessment of reliability. Ten signals are extracted from facial remote photoplethysmography (rPPG), upper-body motion, and deep learning pipelines, and analyzed using four spectral estimators: Welch's method, Multiple Signal Classification (MUSIC), Fast Fourier Transform (FFT), and peak detection. Segment-level quality indices are then used to train machine learning models that predict accuracy or select the most reliable signal. This enables adaptive signal fusion and quality-based segment filtering. Experiments on three public datasets (OMuSense-23, COHFACE, MAHNOB-HCI) show that the proposed framework achieves lower RR estimation errors than individual methods in most cases, with performance gains depending on dataset characteristics. These findings highlight the potential of quality-driven predictive modeling to deliver scalable and generalizable video-based respiratory monitoring solutions.

cs.CV↗

arXiv2025

LiDAR-based Human Activity Recognition through Laplacian Spectral Analysis

Human Activity Recognition supports applications in healthcare, manufacturing, and human-machine interaction. LiDAR point clouds offer a privacy-preserving alternative to cameras and are robust to illumination. We propose a HAR method based on graph spectral analysis. Each LiDAR frame is mapped to a proximity graph (epsilon-graph) and the Laplacian spectrum is computed. Eigenvalues and statistics of eigenvectors form pose descriptors, and temporal statistics over sliding windows yield fixed vectors for classification with support vector machines and random forests. On the MM-Fi dataset with 40 subjects and 27 activities, under a strict subject-independent protocol, the method reaches 94.4% accuracy on a 13-class rehabilitation set and 90.3% on all 27 activities. It also surpasses the skeleton-based baselines reported for MM-Fi. The contribution is a compact and interpretable feature set derived directly from point cloud geometry that provides an accurate and efficient alternative to end-to-end deep learning.

cs.CV↗

arXiv2025

3DPCNet: Pose Canonicalization for Robust Viewpoint-Invariant 3D Kinematic Analysis from Monocular RGB cameras

Monocular 3D pose estimators produce camera-centered skeletons, creating view-dependent kinematic signals that complicate comparative analysis in applications such as health and sports science. We present 3DPCNet, a compact, estimator-agnostic module that operates directly on 3D joint coordinates to rectify any input pose into a consistent, body-centered canonical frame. Its hybrid encoder fuses local skeletal features from a graph convolutional network with global context from a transformer via a gated cross-attention mechanism. From this representation, the model predicts a continuous 6D rotation that is mapped to an $SO(3)$ matrix to align the pose. We train the model in a self-supervised manner on the MM-Fi dataset using synthetically rotated poses, guided by a composite loss ensuring both accurate rotation and pose reconstruction. On the MM-Fi benchmark, 3DPCNet reduces the mean rotation error from over 20$^{\circ}$ to 3.4$^{\circ}$ and the Mean Per Joint Position Error from ~64 mm to 47 mm compared to a geometric baseline. Qualitative evaluations on the TotalCapture dataset further demonstrate that our method produces acceleration signals from video that show strong visual correspondence to ground-truth IMU sensor data, confirming that our module removes viewpoint variability to enable physically plausible motion analysis.

cs.CV↗

arXiv2025

APML: Adaptive Probabilistic Matching Loss for Robust 3D Point Cloud Reconstruction

Training deep learning models for point cloud prediction tasks such as shape completion and generation depends critically on loss functions that measure discrepancies between predicted and ground-truth point sets. Commonly used functions such as Chamfer Distance (CD), HyperCD, and InfoCD rely on nearest-neighbor assignments, which often induce many-to-one correspondences, leading to point congestion in dense regions and poor coverage in sparse regions. These losses also involve non-differentiable operations due to index selection, which may affect gradient-based optimization. Earth Mover Distance (EMD) enforces one-to-one correspondences and captures structural similarity more effectively, but its cubic computational complexity limits its practical use. We propose the Adaptive Probabilistic Matching Loss (APML), a fully differentiable approximation of one-to-one matching that leverages Sinkhorn iterations on a temperature-scaled similarity matrix derived from pairwise distances. We analytically compute the temperature to guarantee a minimum assignment probability, eliminating manual tuning. APML achieves near-quadratic runtime, comparable to Chamfer-based losses, and avoids non-differentiable operations. When integrated into state-of-the-art architectures (PoinTr, PCN, FoldingNet) on ShapeNet benchmarks and on a spatiotemporal Transformer (CSI2PC) that generates 3D human point clouds from WiFi CSI measurements, APM loss yields faster convergence, superior spatial distribution, especially in low-density regions, and improved or on-par quantitative performance without additional hyperparameter search. The code is available at: https://github.com/apm-loss/apml.

cs.CV↗

arXiv2025

Design, Implementation and Evaluation of a Real-Time Remote Photoplethysmography (rPPG) Acquisition System for Non-Invasive Vital Sign Monitoring

The growing integration of smart environments and low-power computing devices, coupled with mass-market sensor technologies, is driving advancements in remote and non-contact physiological monitoring. However, deploying these systems in real-time on resource-constrained platforms introduces significant challenges related to scalability, interoperability, and performance. This paper presents a real-time remote photoplethysmography (rPPG) system optimized for low-power devices, designed to extract physiological signals, such as heart rate (HR), respiratory rate (RR), and oxygen saturation (SpO2), from facial video streams. The system is built on the Face2PPG pipeline, which processes video frames sequentially for rPPG signal extraction and analysis, while leveraging a multithreaded architecture to manage video capture, real-time processing, network communication, and graphical user interface (GUI) updates concurrently. This design ensures continuous, reliable operation at 30 frames per second (fps), with adaptive feedback through a collaborative user interface to guide optimal signal capture conditions. The network interface includes both an HTTP server for continuous video streaming and a RESTful API for on-demand vital sign retrieval. To ensure accurate performance despite the limitations of low-power devices, we use a hybrid programming model combining Functional Reactive Programming (FRP) and the Actor Model, allowing event-driven processing and efficient task parallelization. The system is evaluated under real-time constraints, demonstrating robustness while minimizing computational overhead. Our work addresses key challenges in real-time biosignal monitoring, offering practical solutions for optimizing performance in modern healthcare and human-computer interaction applications.

cs.CV↗

arXiv2025

Exponentially Weighted Instance-Aware Repeat Factor Sampling for Long-Tailed Object Detection Model Training in Unmanned Aerial Vehicles Surveillance Scenarios

Object detection models often struggle with class imbalance, where rare categories appear significantly less frequently than common ones. Existing sampling-based rebalancing strategies, such as Repeat Factor Sampling (RFS) and Instance-Aware Repeat Factor Sampling (IRFS), mitigate this issue by adjusting sample frequencies based on image and instance counts. However, these methods are based on linear adjustments, which limit their effectiveness in long-tailed distributions. This work introduces Exponentially Weighted Instance-Aware Repeat Factor Sampling (E-IRFS), an extension of IRFS that applies exponential scaling to better differentiate between rare and frequent classes. E-IRFS adjusts sampling probabilities using an exponential function applied to the geometric mean of image and instance frequencies, ensuring a more adaptive rebalancing strategy. We evaluate E-IRFS on a dataset derived from the Fireman-UAV-RGBT Dataset and four additional public datasets, using YOLOv11 object detection models to identify fire, smoke, people and lakes in emergency scenarios. The results show that E-IRFS improves detection performance by 22\% over the baseline and outperforms RFS and IRFS, particularly for rare categories. The analysis also highlights that E-IRFS has a stronger effect on lightweight models with limited capacity, as these models rely more on data sampling strategies to address class imbalance. The findings demonstrate that E-IRFS improves rare object detection in resource-constrained environments, making it a suitable solution for real-time applications such as UAV-based emergency monitoring. The code is available at: https://github.com/futurians/E-IRFS.

cs.CV↗

arXiv2024

Spatio-Temporal 3D Point Clouds from WiFi-CSI Data via Transformer Networks

Joint communication and sensing (JC\&S) is emerging as a key component in 5G and 6G networks, enabling dynamic adaptation to environmental changes and enhancing contextual awareness for optimized communication. By leveraging real-time environmental data, JC\&S improves resource allocation, reduces latency, and enhances power efficiency, while also supporting simulations and predictive modeling. This makes it a key technology for reactive systems and digital twins. These systems can respond to environmental events in real-time, offering transformative potential in sectors like smart cities, healthcare, and Industry 5.0, where adaptive and multimodal interaction is critical to enhance real-time decision-making. In this work, we present a transformer-based architecture that processes temporal Channel State Information (CSI) data, specifically amplitude and phase, to generate 3D point clouds of indoor environments. The model utilizes a multi-head attention to capture complex spatio-temporal relationships in CSI data and is adaptable to different CSI configurations. We evaluate the architecture on the MM-Fi dataset, using two different protocols to capture human presence in indoor environments. The system demonstrates strong potential for accurate 3D reconstructions and effectively distinguishes between close and distant objects, advancing JC\&S applications for spatial sensing in future wireless networks.

eess.SP↗

arXiv2024

OMuSense-23: A Multimodal Dataset for Contactless Breathing Pattern Recognition and Biometric Analysis

In the domain of non-contact biometrics and human activity recognition, the lack of a versatile, multimodal dataset poses a significant bottleneck. To address this, we introduce the Oulu Multi Sensing (OMuSense-23) dataset that includes biosignals obtained from a mmWave radar, and an RGB-D camera. The dataset features data from 50 individuals in three distinct poses -- standing, sitting, and lying down -- each featuring four specific breathing pattern activities: regular breathing, reading, guided breathing, and apnea, encompassing both typical situations (e.g., sitting with normal breathing) and critical conditions (e.g., lying down without breathing). In our work, we present a detailed overview of the OMuSense-23 dataset, detailing the data acquisition protocol, describing the process for each participant. In addition, we provide, a baseline evaluation of several data analysis tasks related to biometrics, breathing pattern recognition and pose identification. Our results achieve a pose identification accuracy of 87\% and breathing pattern activity recognition of 83\% using features extracted from biosignals. The OMuSense-23 dataset is publicly available as resource for other researchers and practitioners in the field.

cs.CV↗

arXiv2024

Evaluation of Video-Based rPPG in Challenging Environments: Artifact Mitigation and Network Resilience

Video-based remote photoplethysmography (rPPG) has emerged as a promising technology for non-contact vital sign monitoring, especially under controlled conditions. However, the accurate measurement of vital signs in real-world scenarios faces several challenges, including artifacts induced by videocodecs, low-light noise, degradation, low dynamic range, occlusions, and hardware and network constraints. In this article, we systematically investigate comprehensive investigate these issues, measuring their detrimental effects on the quality of rPPG measurements. Additionally, we propose practical strategies for mitigating these challenges to improve the dependability and resilience of video-based rPPG systems. We detail methods for effective biosignal recovery in the presence of network limitations and present denoising and inpainting techniques aimed at preserving video frame integrity. Through extensive evaluations and direct comparisons, we demonstrate the effectiveness of the approaches in enhancing rPPG measurements under challenging environments, contributing to the development of more reliable and effective remote vital sign monitoring technologies.

cs.CV↗

arXiv2024

Multi-objective Feature Selection in Remote Health Monitoring Applications

Radio frequency (RF) signals have facilitated the development of non-contact human monitoring tasks, such as vital signs measurement, activity recognition, and user identification. In some specific scenarios, an RF signal analysis framework may prioritize the performance of one task over that of others. In response to this requirement, we employ a multi-objective optimization approach inspired by biological principles to select discriminative features that enhance the accuracy of breathing patterns recognition while simultaneously impeding the identification of individual users. This approach is validated using a novel vital signs dataset consisting of 50 subjects engaged in four distinct breathing patterns. Our findings indicate a remarkable result: a substantial divergence in accuracy between breathing recognition and user identification. As a complementary viewpoint, we present a contrariwise result to maximize user identification accuracy and minimize the system's capacity for breathing activity recognition.

cs.LG↗

arXiv2023

Non-contact Multimodal Indoor Human Monitoring Systems: A Survey

Indoor human monitoring systems leverage a wide range of sensors, including cameras, radio devices, and inertial measurement units, to collect extensive data from users and the environment. These sensors contribute diverse data modalities, such as video feeds from cameras, received signal strength indicators and channel state information from WiFi devices, and three-axis acceleration data from inertial measurement units. In this context, we present a comprehensive survey of multimodal approaches for indoor human monitoring systems, with a specific focus on their relevance in elderly care. Our survey primarily highlights non-contact technologies, particularly cameras and radio devices, as key components in the development of indoor human monitoring systems. Throughout this article, we explore well-established techniques for extracting features from multimodal data sources. Our exploration extends to methodologies for fusing these features and harnessing multiple modalities to improve the accuracy and robustness of machine learning models. Furthermore, we conduct comparative analysis across different data modalities in diverse human monitoring tasks and undertake a comprehensive examination of existing multimodal datasets. This extensive survey not only highlights the significance of indoor human monitoring systems but also affirms their versatile applications. In particular, we emphasize their critical role in enhancing the quality of elderly care, offering valuable insights into the development of non-contact monitoring solutions applicable to the needs of aging populations.

eess.SP↗

arXiv2023

A Cyberpunk 2077 perspective on the prediction and understanding of future technology

Science fiction and video games have long served as valuable tools for envisioning and inspiring future technological advancements. This position paper investigates the potential of Cyberpunk 2077, a popular science fiction video game, to shed light on the future of technology, particularly in the areas of artificial intelligence, edge computing, augmented humans, and biotechnology. By analyzing the game's portrayal of these technologies and their implications, we aim to understand the possibilities and challenges that lie ahead. We discuss key themes such as neurolink and brain-computer interfaces, multimodal recording systems, virtual and simulated reality, digital representation of the physical world, augmented and AI-based home appliances, smart clothing, and autonomous vehicles. The paper highlights the importance of designing technologies that can coexist with existing preferences and systems, considering the uneven adoption of new technologies. Through this exploration, we emphasize the potential of science fiction and video games like Cyberpunk 2077 as tools for guiding future technological advancements and shaping public perception of emerging innovations.

cs.HC↗

arXiv2023

Facial Kinship Verification from remote photoplethysmography

Facial Kinship Verification (FKV) aims at automatically determining whether two subjects have a kinship relation based on human faces. It has potential applications in finding missing children and social media analysis. Traditional FKV faces challenges as it is vulnerable to spoof attacks and raises privacy issues. In this paper, we explore for the first time the FKV with vital bio-signals, focusing on remote Photoplethysmography (rPPG). rPPG signals are extracted from facial videos, resulting in a one-dimensional signal that measures the changes in visible light reflection emitted to and detected from the skin caused by the heartbeat. Specifically, in this paper, we employed a straightforward one-dimensional Convolutional Neural Network (1DCNN) with a 1DCNN-Attention module and kinship contrastive loss to learn the kin similarity from rPPGs. The network takes multiple rPPG signals extracted from various facial Regions of Interest (ROIs) as inputs. Additionally, the 1DCNN attention module is designed to learn and capture the discriminative kin features from feature embeddings. Finally, we demonstrate the feasibility of rPPG to detect kinship with the experiment evaluation on the UvANEMO Smile Database from different kin relations.

cs.CV↗

arXiv2023

Estimating exercise-induced fatigue from thermal facial images

Exercise-induced fatigue resulting from physical activity can be an early indicator of overtraining, illness, or other health issues. In this article, we present an automated method for estimating exercise-induced fatigue levels through the use of thermal imaging and facial analysis techniques utilizing deep learning models. Leveraging a novel dataset comprising over 400,000 thermal facial images of rested and fatigued users, our results suggest that exercise-induced fatigue levels could be predicted with only one static thermal frame with an average error smaller than 15\%. The results emphasize the viability of using thermal imaging in conjunction with deep learning for reliable exercise-induced fatigue estimation.

cs.CV↗

arXiv2023

Respiratory Disease Classification and Biometric Analysis Using Biosignals from Digital Stethoscopes

Respiratory diseases remain a leading cause of mortality worldwide, highlighting the need for faster and more accurate diagnostic tools. This work presents a novel approach leveraging digital stethoscope technology for automatic respiratory disease classification and biometric analysis. Our approach has the potential to significantly enhance traditional auscultation practices. By leveraging one of the largest publicly available medical database of respiratory sounds, we train machine learning models to classify various respiratory health conditions. Our method differs from conventional methods by using Empirical Mode Decomposition (EMD) and spectral analysis techniques to isolate clinically relevant biosignals embedded within acoustic data captured by digital stethoscopes. This approach focuses on information closely tied to cardiovascular and respiratory patterns within the acoustic data. Spectral analysis and filtering techniques isolate Intrinsic Mode Functions (IMFs) strongly correlated with these physiological phenomena. These biosignals undergo a comprehensive feature extraction process for predictive modeling. These features then serve as input to train several machine learning models for both classification and regression tasks. Our approach achieves high accuracy in both binary classification (89% balanced accuracy for healthy vs. diseased) and multi-class classification (72% balanced accuracy for specific diseases like pneumonia and COPD). For the first time, this work introduces regression models capable of estimating age and body mass index (BMI) based solely on acoustic data, as well as a model for sex classification. Our findings underscore the potential of intelligent digital stethoscopes to significantly enhance assistive and remote diagnostic capabilities, contributing to advancements in digital health, telehealth, and remote patient monitoring.

eess.SP↗