arXiv subjects

Colin Roach

Publications and source records attributed to Colin Roach.

6 recordsLinked to original sources

arXiv2026

Global Gyrokinetic Simulations of Electromagnetic Turbulence in STEP

This paper presents gradient-driven global electromagnetic gyrokinetic simulations for a conceptual burning flat-top operating point of STEP [1], STEP-EC-HD, and investigates how non-local effects influence the nonlinear saturation and transport of the electromagnetic turbulence at finite ${\beta}$. Local gyrokinetic simulations have shown that including ${\delta}B_{\parallel}$ is essential for the dominant hybrid kinetic ballooning modes, or hKBMs, to be unstable in STEP [2]. Using the long-wavelength ${\delta}B_{\parallel}$ solver [3] implemented in GENE [4], this work demonstrates that the linear mode spectrum can be accurately captured in global geometry, which results in good agreement with an ensemble of local flux-tube simulations. The global framework reproduces the hKBMs identified in [5], while microtearing modes remain challenging to resolve due to their shorter radial scales. Nonlinear simulations reveal clear evidence of an electromagnetic transition to states with extremely large heat fluxes, consistent with local simulations and with the predicted loss of zonal-flow regulation for this proposed operating point [6]. These findings establish the capability of global gyrokinetics to capture finite-${\beta}$ dynamics in STEP-like plasmas and motivate future work to identify the conditions governing this transition.

physics.plasm-ph↗

arXiv2026

On the transition to large fluxes and access to second stability in gyrokinetic simulations of electromagnetic turbulence in STEP

This work investigates the nonlinear transition to large heat fluxes observed in local gyrokinetic simulations of electromagnetic turbulence in STEP. Using the stress-balance framework of Zhang et al. (arXiv:2606.04616, arXiv:2607.11789), we confirm that the onset of extreme transport correlates with a critical value of $q^{2}\beta_{e}$, where $q$ is the safety factor and $\beta_{e}$ is the ratio of electron thermal pressure to magnetic pressure, and relate this to a limit on the poloidal beta $\beta_{\mathrm{pol}}$. Crucially, this critical value lies below any relevant linear stability limit in the ($q$, $\beta_{e}$) space (e.g., the onset of ideal or kinetic ballooning modes). Using an extensive set of nonlinear gyrokinetic simulations, we demonstrate that the transition to large fluxes in STEP is governed by a balance between the electrostatic and magnetic-flutter stresses. We argue, and also show numerically, that larger-major-radius tokamaks reach the electromagnetic non-zonal regime at lower $\beta_{e}$, making this MHD-controlled saturation limit more accessible in reactor-scale devices than in small spherical tokamaks. We also demonstrate that access to a second-stable regime enables re-saturation at larger values of $\beta^{\prime}$. We further show that the ideal ballooning mode (IBM) threshold serves as a useful proxy for delineating this second-stable region and also as a qualitative guide for the onset of large fluxes. These results provide a predictive framework for identifying no-go zone predictions from local gyrokinetics and offer new insight into the electromagnetic saturation physics relevant to STEP and other high-$\beta_{e}$ devices.

physics.plasm-ph↗

arXiv2024

Reducing turbulent transport in tokamaks by combining intrinsic rotation and the low momentum diffusivity regime

Based on the analysis of a large number of high-fidelity nonlinear gyrokinetic simulations, we propose a novel strategy to improve confinement in spherical tokamak plasmas by combining up-down asymmetric flux surface shaping with the Low Momentum Diffusivity (LMD) regime. We show that the intrinsic momentum flux driven by up-down asymmetry creates strong flow shear in the LMD regime that can significantly reduce energy transport, increasing the critical gradient by up to $25\%$. In contrast to traditional methods for generating flow shear, such as neutral beam injection, this approach requires no external momentum source and is expected to scale well to large fusion devices. The experimental applicability of this strategy in spherical tokamaks is addressed via simulations by considering actual equilibria from MAST and a preliminary equilibrium from SMART.

physics.plasm-ph↗

arXiv2024

Physics of the low momentum diffusivity regime in tokamaks and its experimental applicability

Strong $E\times B$ plasma flow shear is beneficial for reducing turbulent transport. However, traditional methods of driving flow shear do not scale well to large devices such as future fusion power plants. In this paper, we use a large number of nonlinear gyrokinetic simulations to study a novel approach to increase flow shear: decreasing the momentum diffusivity to make the plasma ``easier to push''. We first use an idealized circular geometry and find that one can obtain low momentum diffusivity at tight aspect ratio, low safety factor, high magnetic shear and low temperature gradient. This is the so-called Low Momentum Diffusivity (LMD) regime. To drive intrinsic momentum flux, we then tilt the flux surface, making it up-down asymmetric. In the LMD regime, this intrinsic momentum flux drives strong flow shear that can significantly reduce the heat flux and increase the critical temperature gradient. We also consider the actual experimental geometry of the MAST tokamak to illustrate that this strategy can be practical and create experimentally significant flow shear. Lastly, a preliminary prediction for the SMART tokamak is made.

physics.plasm-ph↗

arXiv2024

Gaussian process surrogate models for the properties of micro-tearing modes in spherical tokamaks

Spherical tokamaks (STs) have many desirable features that make them a suitable choice for fusion power plants. To understand their confinement properties, accurate calculation of turbulent micro-instabilities is necessary for tokamak design. Presented is a novel surrogate model for Micro-tearing modes (MTMs), the micro-instability thought to be dominant in high beta STs. Direct numerical calculation of micro-instabilities is computationally expensive and is a significant bottleneck in integrated plasma modelling. The considerable number of geometric and thermodynamic parameters, the interactions that influence these coefficients and the resolutions needed to accurately resolve these modes, makes direct numerical simulation for parameter space exploration computationally extremely challenging. However, this and the dearth of accurate reduced physics models for MTMs makes it suitable for surrogate modelling using Gaussian Process Regression, a modern machine learning technique. This paper outlines the further development of a data-driven reduced-order model across a spherical tokamak reactor-relevant parameter space utilising Gaussian Process Regression (GPR) and classification; techniques from machine learning. To build the original simple GP model these two components were used in an active learning loop to maximise the efficiency of data acquisition thus minimising computational cost. The `simple' GP was seen to show a plateau of fidelity with more data and to be under-confident, particular in areas of parameter space close to marginal stability. It is postulated that the presence of multiple sub-types of MTM could be the root cause, with the underlying function being less smooth than expected. An expansion of the model using clustering algorithms to find optimal sub models using a mixture of experts approach is shown to greatly improve the variances in the outputs of the GP model.

physics.plasm-ph↗

arXiv2023

Gaussian Process Regression models for the properties of micro-tearing modes in spherical tokamak

Spherical tokamaks (STs) have many desirable features that make them an attractive choice for a future fusion power plant. Power plant viability is intrinsically related to plasma heat and particle confinement and this is often determined by the level of micro-instability driven turbulence. Accurate calculation of the properties of turbulent micro-instabilities is therefore critical for tokamak design, however, the evaluation of these properties is computationally expensive. The considerable number of geometric and thermodynamic parameters and the high resolutions required to accurately resolve these instabilities makes repeated use of direct numerical simulations in integrated modelling workflows extremely computationally challenging and creates the need for fast, accurate, reduced-order models. This paper outlines the development of a data-driven reduced-order model, often termed a {\it surrogate model} for the properties of micro-tearing modes (MTMs) across a spherical tokamak reactor-relevant parameter space utilising Gaussian Process Regression (GPR) and classification; techniques from machine learning. These two components are used in an active learning loop to maximise the efficiency of data acquisition thus minimising computational cost. The high-fidelity gyrokinetic code GS2 is used to calculate the linear properties of the MTMs: the mode growth rate, frequency and normalised electron heat flux; core components of a quasi-linear transport model. Five-fold cross-validation and direct validation on unseen data is used to ascertain the performance of the resulting surrogate models.

physics.plasm-ph↗