arXiv subjects

Christos Masouros

Publications and source records attributed to Christos Masouros.

At least 199 records · Page 11Linked to original sources

arXiv2018

User-Centric Distributed Antenna Transmission: Secure Precoding and Antenna Selection with Interference Exploitation

We address physical layer security in distributed antenna (DA) systems, where eavesdroppers (Eves) can intercept the information transmitted for the intended receiver (IR). To realize a user-centric, power-efficient and physical layer security-addressing system, we aim at minimizing total power consumption by jointly designing DA selection and secure precoding. Different from the conventional artificial noise (AN)-aided secure transmission, where AN is treated as an undesired element for the IR, we design AN such that it is constructive to the IR while keeping destructive to the Eves. Importantly, we investigate two practical scenarios, where the IR and Eves' channel state information (CSI) is imperfectly obtained or the Eves' CSI is completely unknown. To handle the CSI uncertainties, we solve the problems in probabilistic and deterministic robust optimization respectively, both satisfying the IR' signal-to-interference-and-ratio (SINR) requirement by use of constructive AN and addressing security against the Eves. Simulation results demonstrate our algorithms consume much less power compared to the centralized antenna (CA) systems with/without antenna selection, as well as the DA systems with conventional AN processing. Last but not least, by the proposed algorithms, the activation of DAs closely relates to users' locations and quality-of-service (QoS) requirements, featuring a user-centric and on-demand structure.

eess.SP↗

arXiv2018

Sum Rate and Fairness Analysis for the MU-MIMO Downlink under PSK Signalling: Interference Suppression vs Exploitation

In this paper, we analyze the sum rate performance of multi-user multiple-input multiple-output (MU-MIMO) systems, with a finite constellation phase-shift keying (PSK) input alphabet. We analytically calculate and compare the achievable sum rate in three downlink transmission scenarios: 1) without precoding, 2) with zero forcing (ZF) precoding 3) with closed form constructive interference (CI) precoding technique. In light of this, new analytical expressions for the average sum rate are derived in the three cases, and Monte Carlo simulations are provided throughout to validate the analysis. Furthermore, based on the derived expressions, a power allocation scheme that can ensure fairness among the users is also proposed. The results in this work demonstrate that, the CI strictly outperforms the other two schemes, and the performance gap between the considered schemes increases with increase in the MIMO size. In addition, the CI provides higher fairness and the power allocation algorithm proposed in this paper can achieve maximum fairness index.

eess.SP↗

arXiv2018

Interference Exploitation Precoding for Multi-Level Modulations: Closed-Form Solutions

In this paper, we study closed-form interference-exploitation precoding for multi-level modulations in the downlink of multi-user multiple-input single-output (MU-MISO) systems. We consider two distinct cases: first, for the case where the number of served users is not larger than the number of transmit antennas at the base station (BS), we mathematically derive the optimal precoding structure based on the Karush-Kuhn-Tucker (KKT) conditions. By formulating the dual problem, the precoding problem for multi-level modulations is transformed into a pre-scaling operation using quadratic programming (QP) optimization. We further consider the case where the number of served users is larger than the number of transmit antennas at the BS. By employing the pseudo inverse, we show that the optimal solution of the pre-scaling vector is equivalent to a linear combination of the right singular vectors corresponding to zero singular values, and derive the equivalent QP formulation. We also present the condition under which multiplexing more streams than the number of transmit antennas is achievable. For both considered scenarios, we propose a modified iterative algorithm to obtain the optimal precoding matrix, as well as a sub-optimal closed-form precoder. Numerical results validate our derivations on the optimal precoding structures for multi-level modulations, and demonstrate the superiority of interference-exploitation precoding for both scenarios.

cs.IT↗

arXiv2018

1-Bit Massive MIMO Downlink Based on Constructive Interference

In this paper, we focus on the multiuser massive multiple-input single-output (MISO) downlink with low-cost 1-bit digital-to-analog converters (DACs) for PSK modulation, and propose a low-complexity refinement process that is applicable to any existing 1-bit precoding approaches based on the constructive interference (CI) formulation. With the decomposition of the signals along the detection thresholds, we first formulate a simple symbol-scaling method as the performance metric. The low-complexity refinement approach is subsequently introduced, where we aim to improve the introduced symbol-scaling performance metric by modifying the transmit signal on one antenna at a time. Numerical results validate the effectiveness of the proposed refinement method on existing approaches for massive MIMO with 1-bit DACs, and the performance improvements are most significant for the low-complexity quantized zero-forcing (ZF) method.

eess.SP↗

arXiv2018

Hybrid Analog-Digital Precoding for Interference Exploitation

We study the multi-user massive multiple-input-single-output (MISO) and focus on the downlink systems where the base station (BS) employs hybrid analog-digital precoding with low-cost 1-bit digital-to-analog converters (DACs). In this paper, we propose a hybrid downlink transmission scheme where the analog precoder is formed based on the SVD decomposition. In the digital domain, instead of designing a linear transmit precoding matrix, we directly design the transmit signals by exploiting the concept of constructive interference. The optimization problem is then formulated based on the geometry of the modulation constellations and is shown to be non-convex. We relax the above optimization and show that the relaxed optimization can be transformed into a linear programming that can be efficiently solved. Numerical results validate the superiority of the proposed scheme for the hybrid massive MIMO downlink systems.

eess.SP↗

arXiv2018

Hybrid Beamforming With Sub-arrayed MIMO Radar: Enabling Joint Sensing and Communication at mmWave Band

In this paper, we propose a beamforming design for dual-functional radar-communication (DFRC) systems at the millimeter wave (mmWave) band, where hybrid beamforming and sub-arrayed MIMO radar techniques are jointly exploited. We assume that a base station (BS) is serving a user equipment (UE) located in a Non-Line-of-Sight (NLoS) channel, which in the meantime actively detects multiple targets located in a Line-of-Sight (LoS) channel. Given the optimal communication beamformer and the desired radar beampattern, we propose to design the analog and digital beamformers under non-convex constant-modulus (CM) and power constraints, such that the weighted summation of the communication and radar beamforming errors is minimized. The formulated optimization problem can be decomposed into three subproblems, and is solved by the alternating minimization approach. Numerical simulations verify the feasibility of the proposed beamforming design, and show that our approach offers a favorable performance tradeoff between sensing and communication.

eess.SP↗

arXiv2018

Interfering Channel Estimation in Radar-Cellular Coexistence: How Much Information Do We Need?

In this paper, we focus on the coexistence between a MIMO radar and cellular base stations. We study the interfering channel estimation, where the radar is operated in the "search and track" mode, and the BS receives the interference from the radar. Unlike the conventional methods where the radar and the cellular systems fully cooperate with each other, in this work we consider that they are uncoordinated and the BS needs to acquire the interfering channel state information (ICSI) by exploiting the radar probing waveforms. For completeness, both the line-of-sight (LoS) and Non-LoS (NLoS) channels are considered in the coexistence scenario. By further assuming that the BS has limited a priori knowledge about the radar waveforms, we propose several hypothesis testing methods to identify the working mode of the radar, and then obtain the ICSI through a variety of channel estimation schemes. Based on the statistical theory, we analyze the theoretical performance of both the hypothesis testing and the channel estimation methods. Finally, simulation results verify the effectiveness of our theoretical analysis and demonstrate that the BS can effectively estimate the interfering channel even with limited information from the radar.

eess.SP↗

arXiv2018

Deployment Strategies of Multiple Aerial BSs for User Coverage and Power Efficiency Maximization

Unmanned aerial vehicle (UAV) based aerial base stations (BSs) can provide rapid communication services to ground users and are thus promising for future communication systems. In this paper, we consider a scenario where no functional terrestrial BSs are available and the aim is deploying multiple aerial BSs to cover a maximum number of users within a certain target area. To this end, we first propose a naive successive deployment method, which converts the non-convex constraints in the involved optimization into a combination of linear constraints through geometrical relaxation. Then we investigate a deployment method based on K-means clustering. The method divides the target area into K convex subareas, where within each subarea, a mixed integer non-linear problem (MINLP) is solved. An iterative power efficient technique is further proposed to improve coverage probability with reduced power. Finally, we propose a robust technique for compensating the loss of coverage probability in the existence of inaccurate user location information (ULI). Our simulation results show that, the proposed techniques achieve an up to 30% higher coverage probability when users are not distributed uniformly. In addition, the proposed simultaneous deployment techniques, especially the one using iterative algorithm improve power-efficiency by up to 15% compared to the benchmark circle packing theory.

eess.SP↗

arXiv2017

Interference Exploitation Precoding Made Practical: Closed-Form Solutions with Optimal Performance

In this paper, we propose closed-form precoding schemes with optimal performance for constructive interference (CI) exploitation in the multiuser multiple-input single-output (MU-MISO) downlink. We first consider an optimization where we maximize the distance between the constructive region and the detection thresholds. The cases of both strict and non-strict phase rotation are considered and can further be formulated as convex optimization problems. For optimization with strict phase rotation, we mathematically derive the optimal beamforming structure with Lagrangian and Karush-Kuhn-Tucker (KKT) conditions. By formulating its dual problem, the optimization problem is further shown to be equivalent to a quadratic programming (QP) over a simplex, which can be solved more efficiently. We then extend our analysis to the case of non-strict phase rotation, where it is mathematically shown that a K-dimensional optimization for non-strict phase rotation is equivalent to a 2K-dimensional optimization for strict phase rotation in terms of the problem formulation. The connection with the conventional zero-forcing (ZF) precoding is also discussed. Based on the above analysis, we further propose an iterative closed-form scheme to obtain the optimal beamforming matrix, where within each iteration a closed-form solution can be obtained. Numerical results validate our analysis and the optimality of the proposed iterative scheme, and further show that the proposed closed-form scheme is more efficient than the conventional QP algorithms with interior-point methods, which motivates the use of CI beamforming in practical wireless systems.

cs.IT↗

arXiv2017

Towards Dual-functional Radar-Communication Systems: Optimal Waveform Design

We focus on a dual-functional multi-input-multi-output (MIMO) radar-communication (RadCom) system, where a single transmitter communicates with downlink cellular users and detects radar targets simultaneously. Several design criteria are considered for minimizing the downlink multi-user interference. First, we consider both the omnidirectional and directional beampattern design problems, where the closed-form globally optimal solutions are obtained. Based on these waveforms, we further consider a weighted optimization to enable a flexible trade-off between radar and communications performance and introduce a low-complexity algorithm. The computational costs of the above three designs are shown to be similar to the conventional zero-forcing (ZF) precoding. Moreover, to address the more practical constant modulus waveform design problem, we propose a branch-and-bound algorithm that obtains a globally optimal solution and derive its worst-case complexity as a function of the maximum iteration number. Finally, we assess the effectiveness of the proposed waveform design approaches by numerical results.

cs.IT↗

arXiv2017

Massive MIMO 1-Bit DAC Transmission: A Low-Complexity Symbol Scaling Approach

We study multi-user massive multiple-input single-output (MISO) systems and focus on downlink transmission, where the base station (BS) employs a large antenna array with low-cost 1-bit digital-to-analog converters (DACs). The direct combination of existing beamforming schemes with 1-bit DACs is shown to lead to an error floor at medium-to-high SNR regime, due to the coarse quantization of the DACs with limited precision. In this paper, based on the constructive interference we consider both a quantized linear beamforming scheme where we analytically obtain the optimal beamforming matrix, and a non-linear mapping scheme where we directly design the transmit signal vector. Due to the 1-bit quantization, the formulated optimization for the non-linear mapping scheme is shown to be non-convex. To solve this problem, the non-convex constraints of the 1-bit DACs are firstly relaxed, followed by an element-wise normalization to satisfy the 1-bit DAC transmission. We further propose a low-complexity symbol scaling scheme that consists of three stages, in which the quantized transmit signal on each antenna element is selected sequentially. Numerical results show that the proposed symbol scaling scheme achieves a comparable performance to the optimization-based non-linear mapping approach, while its corresponding complexity is negligible compared to that of the non-linear scheme.

eess.SP↗

arXiv2017

Secure Full-Duplex Device-to-Device Communication

This paper considers full-duplex (FD) device-to-device (D2D) communications in a downlink MISO cellular system in the presence of multiple eavesdroppers. The D2D pair communicate sharing the same frequency band allocated to the cellular users (CUs). Since the D2D users share the same frequency as the CUs, both the base station (BS) and D2D transmissions interfere each other. In addition, due to limited processing capability, D2D users are susceptible to external attacks. Our aim is to design optimal beamforming and power control mechanism to guarantee secure communication while delivering the required quality-of-service (QoS) for the D2D link. In order to improve security, artificial noise (AN) is transmitted by the BS. We design robust beamforming for secure message as well as the AN in the worst-case sense for minimizing total transmit power with imperfect channel state information (CSI) of all links available at the BS. The problem is strictly non-convex with infinitely many constraints. By discovering the hidden convexity of the problem, we derive a rank-one optimal solution for the power minimization problem.

cs.IT↗

arXiv2017

MU-MIMO Communications with MIMO Radar: From Co-existence to Joint Transmission

Beamforming techniques are proposed for a joint multi-input-multi-output (MIMO) radar-communication (RadCom) system, where a single device acts both as a radar and a communication base station (BS) by simultaneously communicating with downlink users and detecting radar targets. Two operational options are considered, where we first split the antennas into two groups, one for radar and the other for communication. Under this deployment, the radar signal is designed to fall into the null-space of the downlink channel. The communication beamformer is optimized such that the beampattern obtained matches the radar's beampattern while satisfying the communication performance requirements. To reduce the optimizations' constraints, we consider a second operational option, where all the antennas transmit a joint waveform that is shared by both radar and communications. In this case, we formulate an appropriate probing beampattern, while guaranteeing the performance of the downlink communications. By incorporating the SINR constraints into objective functions as penalty terms, we further simplify the original beamforming designs to weighted optimizations, and solve them by efficient manifold algorithms. Numerical results show that the shared deployment outperforms the separated case significantly, and the proposed weighted optimizations achieve a similar performance to the original optimizations, despite their significantly lower computational complexity.

cs.IT↗

arXiv2017

Robust MIMO Beamforming for Cellular and Radar Coexistence

In this letter, we consider the coexistence and spectrum sharing between downlink multi-user multiple-input-multiple-output (MU-MIMO) communication and a MIMO radar. For a given performance requirement of the downlink communication system, we design the transmit beamforming such that the detection probability of the radar is maximized. While the original optimization problem is non-convex, we exploit the monotonically increasing relationship of the detection probability with the non-centrality parameter of the resulting probability distribution to obtain a convex lower-bound optimization. The proposed beamformer is designed to be robust to imperfect channel state information (CSI). Simulation results verify that the proposed approach facilitates the coexistence between radar and communication links, and illustrates a scalable trade-off between the two systems' performance.

cs.IT↗

arXiv2017

An Efficient Manifold Algorithm for Constructive Interference based Constant Envelope Precoding

In this letter, we propose a novel manifold-based algorithm to solve the constant envelope (CE) precoding problem with interference exploitation. For a given power budget, we design the precoded symbols subject to the CE constraints, such that the constructive effect of the multi-user interference (MUI) is maximized. While the objective for the original problem is non-differentiable on the complex plane, we consider the smooth approximation of its real representation, and map it onto a Riemannian manifold. By using the Riemmanian conjugate gradient (RCG) algorithm, a local minimizer can be efficiently found for the problem. The complexity of the algorithm is analytically derived in terms of floating-points operations (flops) per iteration. Numerical results show that the proposed algorithm outperforms the conventional methods on both symbol error rate and computational complexity.

cs.IT↗

arXiv2017

Interference Exploitation for Radar and Cellular Coexistence: The Power-Efficient Approach

We propose a novel approach to enable the coexistence between Multi-Input-Multi-Output (MIMO) radar and downlink multi-user Multi-Input-Single-Output (MU-MISO) communication system. By exploiting the constructive multi-user interference (MUI), the proposed approach trades-off useful MUI power for reducing the transmit power, to obtain a power efficient transmission. This paper focuses on two optimization problems: a) Transmit power minimization at the base station (BS) while guaranteeing the receive signal-to-interference-plus-noise ratio (SINR) level of downlink users and the interference-to-noise ratio (INR) level to radar; b) Minimization of the interference from BS to radar for a given requirement of downlink SINR and transmit power budget. To reduce the computational overhead of the proposed scheme in practice, an algorithm based on gradient projection is designed to solve the power minimization problem. In addition, we investigate the trade-off between the performance of radar and communication, and analytically derive the key metrics for MIMO radar in the presence of the interference from the BS. Finally, a robust power minimization problem is formulated to ensure the effectiveness of the proposed method in the case of imperfect Channel State Information (CSI). Numerical results show that the proposed method achieves a significant power saving compared to conventional approaches, while obtaining a favorable performance-complexity trade-off.

cs.IT↗

arXiv2017

Interference Exploitation in Full Duplex Communications: Trading Interference Power for Both Uplink and Downlink Power Savings

This paper considers a multiuser full-duplex (FD) wireless communication system, where a FD radio base station (BS) serves multiple single-antenna half-duplex (HD) uplink and downlink users simultaneously. Unlike conventional interference mitigation approaches, we propose to use the knowledge of the data symbols and the channel state information (CSI) at the FD radio BS to exploit the multi-user interference constructively rather than to suppress it. We propose a multi-objective optimisation problem (MOOP) via the weighted Tchebycheff method to study the trade-off between the two desirable system design objectives namely the total downlink transmit power minimisation and the total uplink transmit power minimisation problems at the same time ensuring the required quality-of-service (QoS) for all users. In the proposed MOOP, we adapt the QoS constraints for the downlink users to accommodate constructive interference (CI) for both generic phase shift keying (PSK) modulated signals as well as for quadrature amplitude modulated (QAM) signals. We also extended our work to a robust design to study the system with imperfect uplink, downlink and self-interference CSI. Simulation results and analysis show that, significant power savings can be obtained. More importantly, however, the MOOP approach here allows for the power saved to be traded off for both uplink and downlink power savings, leading to an overall energy efficiency improvement in the wireless link.

cs.IT↗

arXiv2017

Reduced Switching Connectivity for Large Scale Antenna Selection

In this paper, we explore reduced-connectivity radio frequency (RF) switching networks for reducing the analog hardware complexity and switching power losses in antenna selection (AS) systems. In particular, we analyze different hardware architectures for implementing the RF switching matrices required in AS designs with a reduced number of RF chains. We explicitly show that fully-flexible switching matrices, which facilitate the selection of any possible subset of antennas and attain the maximum theoretical sum rates of AS, present numerous drawbacks such as the introduction of significant insertion losses, particularly pronounced in massive multiple-input multiple-output (MIMO) systems. Since these disadvantages make fully-flexible switching suboptimal in the energy efficiency sense, we further consider partially-connected switching networks as an alternative switching architecture with reduced hardware complexity, which we characterize in this work. In this context, we also analyze the impact of reduced switching connectivity on the analog hardware and digital signal processing of AS schemes that rely on channel power information. Overall, the analytical and simulation results shown in this paper demonstrate that partially-connected switching maximizes the energy efficiency of massive MIMO systems for a reduced number of RF chains, while fully-flexible switching offers sub-optimal energy efficiency benefits due to its significant switching power losses.

cs.IT↗