arXiv subjects

Christos Argyropoulos

Publications and source records attributed to Christos Argyropoulos.

68 records · Page 4Linked to original sources

arXiv2017

Plasmon-Exciton Coupling Using DNA Templates

Coherent energy exchange between plasmons and excitons is a phenomenon that arises in the strong coupling regime resulting in distinct hybrid states. The DNA-origami technique provides an ideal framework to custom-tune plasmon-exciton nanostructures. By employing this well controlled self-assembly process, we realized hybrid states by precisely positioning metallic nanoparticles in a defined spatial arrangement with fixed nanometer-sized interparticle spacing. Varying the nanoparticle diameter between 30 nm and 60 nm while keeping their separation distance constant allowed us to precisely adjust the plasmon resonance of the structure to accurately match the energy frequency of a J-aggregate exciton. With this system we obtained strong plasmon-exciton coupling and studied far-field scattering at the single-structure level. The individual structures displayed normal mode splitting up to 170 meV. The plasmon tunability and the strong field confinement attained with nanodimers on DNA-origami renders an ideal tool to bottom-up assembly plasmon-exciton systems operating at room temperature.

cond-mat.mes-hall↗

arXiv2016

Broadband Polarizers Based on Graphene Metasurfaces

We present terahertz (THz) metasurfaces based on aligned rectangular graphene patches placed on top of a dielectric layer to convert the transmitted linearly polarized waves to circular or elliptical polarized radiation. Our results lead to the design of an ultrathin broadband THz quarter-wave plate. In addition, ultrathin metasurfaces based on arrays of L-shaped graphene periodic patches are demonstrated to achieve broadband cross-polarization transformation in reflection and transmission. The proposed metasurface designs have tunable responses and are envisioned to become the building blocks of several integrated THz systems.

physics.optics↗

arXiv2016

Controlling collective spontaneous emission with plasmonic waveguides

We demonstrate a plasmonic route to control the collective spontaneous emission of two-level quantum emitters. Superradiance and subradiance effects are observed over distances comparable to the operating wavelength inside plasmonic nanochannels. These plasmonic waveguides can provide an effective epsilon-near-zero operation in their cut-off frequency and Fabry-Perot resonances at higher frequencies. The related plasmonic resonant modes are found to efficiently enhance the constructive (superradiance) or destructive (subradiance) interference between different quantum emitters located inside the waveguides. By increasing the number of emitters located in the elongated plasmonic channel, the superradiance effect is enhanced at the epsilon-near-zero operation, leading to a strong coherent increase in the collective spontaneous emission rate. In addition, the separation distance between neighboring emitters and their emission wavelengths can be changed to dynamically control the collective emission properties of the plasmonic system. It is envisioned that the dynamic modification between quantum superradiant and subradiant modes will find applications in quantum entanglement of qubits, low-threshold nanolasers and efficient sensors.

physics.optics↗

arXiv2016

Enhanced four-wave mixing with nonlinear plasmonic metasurfaces

Plasmonic metasurfaces provide an effective way to increase the efficiency of several nonlinear processes while maintaining nanoscale dimensions. In this work, nonlinear metasurfaces based on film-coupled silver nanostripes loaded with Kerr nonlinear material are proposed to achieve efficient four-wave mixing (FWM). Highly localized plasmon resonances are formed in the nanogap between the metallic film and nanostripes. The local electric field is dramatically enhanced in this subwavelength nanoregion. These properties combined with the relaxed phase matching condition due to the ultrathin area lead to a giant FWM efficiency, which is enhanced by nineteen orders of magnitude compared to a bare silver screen. In addition, efficient visible and low-THz sources can be constructed based on the proposed nonlinear metasurfaces. The FWM generated coherent wave has a directional radiation pattern and its output power is relatively insensitive to the incident angles of the excitation sources. This radiated power can be further enhanced by increasing the excitation power. The dielectric nonlinear material placed in the nanogap is mainly responsible for the ultrastrong FWM response. Compact and efficient wave mixers and optical sources spanning different frequency ranges are envisioned to be designed based on the proposed nonlinear metasurface designs.

physics.optics↗

arXiv2015

Plasmonic nanoantennas: enhancing light-matter interactions at the nanoscale

The research area of plasmonics promises devices with ultrasmall footprint operating at ultrafast speeds and with lower energy consumption compared to conventional electronics. These devices will operate with light and bridge the gap between microscale dielectric photonic systems and nanoscale electronics. Recent research advancements in nanotechnology and optics have led to the creation of a plethora of new plasmonic designs. Among the most promising are nanoscale antennas operating at optical frequencies, called nanoantennas. Plasmonic nanoantennas can provide enhanced and controllable light-matter interactions and strong coupling between far-field radiation and localized sources at the nanoscale. After a brief introduction of several plasmonic nanoantenna designs and their well-established radio-frequency antenna counterparts, we review several linear and nonlinear applications of different nanoantenna configurations. In particular, the possibility to tune the scattering response of linear nanoantennas and create robust optical wireless links is presented. In addition, the nonlinear and photodynamic responses of different linear and nonlinear nanoantenna systems are reported. Several future optical devices are envisioned based on these plasmonic nanoantenna configurations, such as low-power nanoswitches, compact ultrafast light sources, nanosensors and efficient energy harvesting systems.

physics.optics↗

arXiv2015

Enhanced transmission modulation based on dielectric metasurfaces loaded with graphene

We present a hybrid graphene dielectric metasurface design to achieve strong tunable and modulated transmission at near-infrared (near-IR) frequencies. The proposed device is constituted by periodic pairs of asymmetric silicon nanobars placed over a silica substrate. An one-atom-thick graphene sheet is positioned between the nanobars and the substrate. The in-plane electromagnetic fields are highly localized and enhanced with this all-dielectric metasurface due to its zero Ohmic losses at near-IR wavelengths. They strongly interact with graphene and couple to its properties. Sharp Fano transmission is obtained at the resonant frequency of this hybrid all-dielectric metasurface configuration due to the cancelation of the electric and magnetic dipole responses at this frequency point. The properties of the graphene monolayer flake can be adjusted by tuning its Fermi energy or chemical potential, leading to different doping levels and, equivalently, material parameters. As a result, the Q factor and the Fano resonant transmission spectrum of the proposed hybrid system can be efficiently tuned and controlled due to the strong light graphene interaction. Higher than 60 percent modulation in the transmission coefficient is reported at near-IR frequencies. The proposed hybrid graphene/dielectric nanodevice has compact footprint, ultrafast speed, and can be easily integrated to the current CMOS technology. These features would have promising applications to near-IR tunable filters, faster optical interconnects, efficient sensors, switches, and amplitude modulators.

cond-mat.mes-hall↗

arXiv2013

Broadening the Bandwidth of Metamaterial Cloaks with Non-Foster Metasurfaces

We introduce the concept and practical design of broadband, ultrathin cloaks based on non-Foster, negatively capacitive metasurfaces. By using properly tailored, active frequency-selective screens conformal to an object, within the realm of practical realization, is shown to enable drastically reduced scattering over a wide frequency range in the microwave regime, orders of magnitude broader than any available passive cloaking technology. The proposed active cloak may impact not only invisibility and camouflaging, but also practical antenna and sensing applications.

physics.optics↗

arXiv2013

Multi-Layered Plasmonic Covers for Comb-Like Scattering Response and Optical Tagging

We discuss the potential of multilayered plasmonic particles to tailor the optical scattering response. The interplay of plasmons localized in thin stacked shells realizes peculiar degenerate cloaking and resonant states occurring at arbitrarily close frequencies. These concepts are applied to realize ultrasharp comb-like scattering responses and synthesize staggered, ideally strong super-scattering states closely coupled to invisible states. We demonstrate robustness to material losses and to variations in the background medium, properties that make these structures ideal for optical tagging.

cond-mat.mtrl-sci↗

arXiv2012

Broadband Absorbers and Selective Emitters based on Plasmonic Brewster Metasurfaces

We discuss the possibility of realizing utlrabroadband omnidirectional absorbers and angularly selective coherent thermal emitters based on properly patterned plasmonic metastructures. Instead of relying on resonant concentration effects that inherently limit the bandwidth, we base our design on the combination of two inherently nonresonant effects: plasmonic Brewster funneling and adiabatic plasmonic focusing. With this approach, we demonstrate compact, broadband absorption and emission spanning terahertz, infrared and optical frequencies, ideal for various energy and defense applications.

cond-mat.mes-hall↗

arXiv2009

Dispersive Cylindrical Cloaks under Non-Monochromatic Illumination

Transformation-based cylindrical cloaks and concentrators are illuminated with non-monochromatic waves and unusual effects are observed with interesting potential applications. The transient responses of the devices are studied numerically with the Finite-Difference Time-Domain method and the results are verified with analytical formulas. We compute the effective bandwidth of several cloaking schemes as well as the effect of losses on the performance of the structures. We also find that narrowband behavior, frequency shift effects, time delays and spatial disturbances of the incoming waves are dominant due to the inherently dispersive nature of the devices. These effects are important and should be taken into account when designing metamaterial-based devices.

physics.class-ph↗

arXiv2009

Ground-Plane Quasi-Cloaking for Free Space

Ground-plane cloak designs are presented, which minimize scattering of electromagnetic radiation from metallic objects in the visible spectrum. It is showed that simplified ground-plane cloaks made from only a few blocks of all-dielectric isotropic materials, either embedded in a background medium or in free space, can provide considerable cloaking performance while maintaining their broadband nature. A design which operates isolated in free space that cloaks radiation originating from a specified direction is also analyzed. These schemes should be much easier to be demonstrated experimentally compared to full designs.

physics.class-ph↗

arXiv2009

Manipulating the Loss in Electromagnetic Cloaks for Perfect Wave Absorption

We examine several ways to manipulate the loss in electromagnetic cloaks, based on transformation electromagnetics. It is found that, by utilizing inherent electric and magnetic losses of metamaterials, perfect wave absorption can be achieved based on several popular designs of electromagnetic cloaks. A practical implementation of the absorber, consisting of ten discrete layers of metamaterials, is proposed. The new devices demonstrate super-absorptivity over a moderate wideband range, suitable for both microwave and optical applications. It is corroborated that the device is functional with a subwavelength thickness and, hence, advantageous compared to the conventional absorbers.

physics.class-ph↗

arXiv2008

A Radial-Dependent Dispersive Finite-Difference Time-Domain Method for the Evaluation of Electromagnetic Cloaks

A radial-dependent dispersive finite-difference time-domain (FDTD) method is proposed to simulate electromagnetic cloaking devices. The Drude dispersion model is applied to model the electromagnetic characteristics of the cloaking medium. Both lossless and lossy cloaking materials are examined and their operating bandwidth is also investigated. It is demonstrated that the perfect "invisibility" from electromagnetic cloaks is only available for lossless metamaterials and within an extremely narrow frequency band.

physics.class-ph↗

arXiv2008

Full-wave finite-difference time-domain simulation of electromagnetic cloaking structures

This paper proposes a radial dependent dispersive finite-difference time-domain method for the modelling of electromagnetic cloaking structures. The permittivity and permeability of the cloak are mapped to the Drude dispersion model and taken into account in dispersive FDTD simulations. Numerical simulations demonstrate that under ideal conditions, objects placed inside the cloak are `invisible' to external electromagnetic fields. However for the simplified cloak based on linear transformations, the back scattering has a similar level to the case of a PEC cylinder without any cloak, rendering the object still being `visible'. It is also demonstrated numerically that the simplified cloak based on high-order transformations can indeed improve the cloaking performance.

physics.class-ph↗