arXiv subjects

Christos Argyropoulos

Publications and source records attributed to Christos Argyropoulos.

At least 19 recordsLinked to original sources

arXiv2026

Waves on the Walls: Empirical Characterization of mmWave Lateral Waves for Enhanced Indoor Coverage

High-frequency millimeter-wave (mmWave) communication systems are constrained by the surrounding environment, where walls are traditionally treated as obstacles that block or reflect signals indoors. Consequently, current beamforming strategies are tailored to circumvent these obstructions. In this paper, a paradigm shift is introduced that leverages lateral wave propagation along building interfaces to extend mmWave coverage. Unlike traditional reflections, lateral waves travel along the boundary between two media of different refractive indices and decay algebraically with distance, offering a potential alternative path for mmWave connectivity. While well-established at low frequencies in natural media, the existence of lateral waves at mmWave frequencies along engineered building materials has not been demonstrated before. To this end, the first experimental characterization of mmWave lateral waves along a wall is reported. Extensive controlled measurements are employed to characterize the signal-grazing geometry and to establish a frequency and distance-dependent path-loss model for this phenomenon. The results provide the first empirical foundation for a new class of interface-guided mmWave links.

cs.NI↗

arXiv2026

Robust Hybrid Beamforming with Liquid Crystal Antennas and Liquid Neural Networks

Sub-terahertz (sub-THz) multi-user multiple-input multiple-output (MU-MIMO) systems unlock immense bandwidth for 6G wireless communications. However, practical deployment of wireless systems in sub-THz bands faces critical challenges such as increased atmospheric absorption, reduced channel coherence time due to increased Doppler spread at higher carrier frequencies, and hardware bottlenecks as low-loss sub-THz phase shifters are difficult to realize. To overcome the hardware and channel estimation challenges of sub-THz systems, this paper proposes a hybrid beamforming (BF) framework that integrates reconfigurable liquid crystal (LC) antennas with a liquid neural network (LNN) for transmitter. Specifically, we employ an LC antenna as the analog BF stage of a hybrid BF architecture, exploiting its voltage-driven permittivity tunability to achieve high-gain beam steering without the need for lossy phase shifters. For digital BF, we utilize an ordinary differential equations-defined LNN to learn temporal channel dynamics, and use a manifold optimization technique to compress the search space. We validated the proposed method on simulated site-specific 108 GHz ray-tracing channels in an urban scenario using NYURay, a ray-tracing simulator validated against 142 GHz propagation measurements. The 108 GHz carrier frequency matches the operating band of the LC antenna hardware. The proposed method achieves an 88.6\% spectral efficiency (SE) gain and higher robustness to imperfect channel estimation compared to the learning-aided gradient descent and gated recurrent unit machine learning baselines, and 1.9 times higher SE than the 3GPP TR~38.901 standard antenna model, highlighting the potential of LC-based hardware for sub-THz communications.

cs.IT↗

arXiv2025

Leveraging Plasmonic Nanocavity Arrays Forming Metasurfaces to Boost Second Harmonic Generation due to Surface Effects

Plasmonic metasurfaces have emerged as a promising platform for enhancing a range of nonlinear optical processes, offering compact geometry and flexibility in light manipulation. Second order nonlinear processes, like second harmonic generation (SHG), typically require non-centrosymmetric crystals to be realized. Here, we experimentally demonstrate enhanced SHG response by using a gold nanocavity array forming a plasmonic metasurface absorber where titanium dioxide (TiO2), a centrosymmetric dielectric material, with subwavelength thickness is deposited in the realized nanogaps. While such dielectric material has an extremely low second order nonlinear susceptibility, we observe 105-fold boosting in the nonlinear SHG process mainly due to the surface nonlinear susceptibility of the gold metal aided by the significant electric field enhancement that occurs in the nanogaps due to the formed nanocavity resonance. The experimental results obtained are theoretically explained with extensive and rigorous nonlinear simulations that consider all the bulk and surface linear and nonlinear material properties. The presented robust harmonic generation from an ultrathin plasmonic metasurface can be used in nonlinear and quantum integrated photonic applications.

physics.optics↗

arXiv2025

Self-induced nonreciprocity from asymmetric photonic topological insulators

Photonic topological insulators and self-induced nonreciprocity based on nonlinear effects in asymmetric structures have garnered increased attention due to their potential applications in quantum information technologies and advanced photonic integrated circuits. In this study, we combine these two fields and present asymmetric photonic crystal designs based on all-dielectric checkerboard structures forming topological interfaces. The resulting topological photonic structures lead to the emergence of a narrowband leaky mode in their linear transmission response accompanied by an edge state with topological protection. The incorporation of the nonlinear optical Kerr effect in the system results to spectral tunability and transmission nonreciprocity in the induced topological edge states as the input beam intensity is increased due to the introduction of asymmetric defects along the interface. We envision that the findings presented in our work will lead to tunable photonic topological insulators with nonreciprocal response that promise to provide new avenues for the development of next-generation photonic devices and quantum optical technologies.

physics.optics↗

arXiv2025

Chiral Spontaneous Photon-Pair Generation with Plasmonic Bound States in the Continuum

Spontaneous parametric down conversion (SPDC) has proven to be a robust and prominent method for creating non-classical light sources of entangled single-photon pairs. However, such sources suffer from low efficiency due to the inherent weakness of the SPDC process. Moreover, there is no control of polarization in the generated photons. Circular polarized SPDC-based sources with efficient chiral response are currently missing, which severely precludes the realization of a wide range of practical applications in quantum computing and communications. The current work solves these inherent problems by demonstrating a novel chiral plasmonic metasurface that leverages a strong quasi-bound state in the continuum (qBIC) resonance which significantly increases the SPDC photon generation efficiency and realizes circular polarized (chiral) single-photon pairs. The presented metasurface design is ultrathin, supports efficient free space outcoupling of chiral classical and quantum radiation, and operates at room temperature. Hence, it offers the potential to realize a compact and integrable quantum source of circularly polarized entangled single-photon pairs.

physics.optics↗

arXiv2025

Antennas in Walls: Performance Analysis of Microstrip Patch Antennas Designed for Internet of Paint (IoP)

This study presents a simulated transceiver with a microstrip patch antenna (MPA) designed to resonate at 150 GHz and embedded in paint. The in-paint MPA (IP-MPA) is designed for the Internet of Paint (IoP) paradigm, which envisions seamless device communication through a paint layer on walls. This study introduces a comprehensive channel model for transceivers in paint at arbitrary depths and IP-MPA orientations. The best antenna orientations are analyzed for IoP channel performance. Extensive simulations indicate that the lateral waves, which propagate along the air-paint interface, exhibit the lowest loss, making this path the most reliable for communication between transceivers in paint. Further, the maximum received power for each propagation path, with the exception of the direct path, depends on depth. The findings suggest that the proposed network of IP-MPA-enabled transceivers for IoP has the potential to transform conventional walls into an integrated high-speed wireless communication and sensing infrastructure.

cs.ET↗

arXiv2025

Roadmap on Nonlocality in Photonic Materials and Metamaterials

Photonic technologies continue to drive the quest for new optical materials with unprecedented responses. A major frontier in this field is the exploration of nonlocal (spatially dispersive) materials, going beyond the local, wavevector-independent assumption traditionally made in optical material modeling. On one end, the growing interest in plasmonic, polaritonic and quantum materials has revealed naturally occurring nonlocalities, emphasizing the need for more accurate models to predict and design their optical responses. This has major implications also for topological, nonreciprocal, and time-varying systems based on these material platforms. Beyond natural materials, artificially structured materials--metamaterials and metasurfaces--can provide even stronger and engineered nonlocal effects, emerging from long-range interactions or multipolar effects. This is a rapidly expanding area in the field of photonic metamaterials, with open frontiers yet to be explored. In the case of metasurfaces, in particular, nonlocality engineering has become a powerful tool for designing strongly wavevector-dependent responses, enabling enhanced wavefront control, spatial compression, multifunctional devices, and wave-based computing. Furthermore, nonlocality and related concepts play a critical role in defining the ultimate limits of what is possible in optics, photonics, and wave physics. This Roadmap aims to survey the most exciting developments in nonlocal photonic materials, highlight new opportunities and open challenges, and chart new pathways that will drive this emerging field forward--toward new scientific discoveries and technological advancements.

cond-mat.mes-hall↗

arXiv2025

Surviving the frailty of time to event analysis in massive datasets with Generalized Additive Models (and the help of Simon Laplace)

Analyses of time to event datasets have been invariably based on the Cox proportional hazards model (PHM). Reformulations of the PHM as a Poisson Generalized Additive Model (GAM) or as a Generalized Linear Mixed Model (GLMM) have been proposed in the literature, aiming to increase the flexibility of the PHM and allow its use in situations in which complex spatiotemporal relationships have to be taken into account when modeling survival. In this report, we provide a unified framework for considering these previous attempts and consider the implementation in software for GAM and GLMM in the R programming language. The connection between GAM/GLMM and the PHM is leveraged to provide computationally efficient implementations for a subclass of survival models that incorporate individual random effects ('frailty models'). Frailty models provide a unified method to address repeated events, correlated outcomes and also time varying visitation schedules when analyzing Electronic Health Record data. However the current implementation of frailty models in software facilities for the Cox model does not scale because of long computation times; conversely the direct implementation of individual random effects in GAM/GLMM software does not scale well with memory usage. We propose a two stage method for survival models with frailty based on the Laplace approximation. Using a D-optimal experimental design to simulate the performance of the proposed method across simulated datasets we illustrate that the proposed method can circumvent the limitations of existing implementations, opening up the possibility to model datasets of hundred of thousands to million individuals using high end workstations from within R.

stat.ME↗

arXiv2024

Internet of Paint (IoP): Design, Challenges, Applications and Future Directions

The proliferation of nano-technology has enabled novel applications in various fields, including the potential for miniaturized terahertz (THz)-enabled devices. The extra-large bandwidth available in the THz spectrum can facilitate high-speed communication, even for transmission through lossy media. Culminating these capabilities, this paper introduces a new paradigm: Internet of Paint (IoP), transforming the 40,000-year-old concept of paint with extensive connectivity and sensing capabilities. IoP will enable seamless, massively parallel, and high-capacity communication and sensing capabilities, enabling innovative applications. IoP is expected to offer communication and sensing using nano-devices embedded in paint. In this paper, challenges towards the realization of IoP are discussed. Simulations indicate that THz signals in this stratified medium can form lateral waves that propagate along the Air-Paint interface and that relatively high channel capacity can be achieved by optimizing the transceiver locations, the paint thickness, and color. Addressing the challenges regarding nano-devices, nano-transceivers, materials, antennas, and power for IoP holds the potential to transform communication technologies and their seamless integration with living spaces.

cs.ET↗

arXiv2024

Plasmonic Nanocavity to Boost Single Photon Emission from Defects in Thin Hexagonal Boron Nitride

Efficient and compact single photon emission platforms operating at room temperature with ultrafast speed and high brightness will be fundamental components of the emerging quantum communications and computing fields. However, so far, it is very challenging to design practical deterministic single photon emitters based on nanoscale solid-state materials that meet the fast emission rate and strong brightness demands. Here, a solution is provided to this longstanding problem by using metallic nanocavities integrated with hexagonal boron nitride (hBN) flakes with defects acting as nanoscale single photon emitters (SPEs) at room temperature. The presented hybrid nanophotonic structure creates a rapid speedup and large enhancement in single photon emission at room temperature. Hence, the nonclassical light emission performance is substantially improved compared to plain hBN flakes and hBN on gold-layered structures without nanocavity. Extensive theoretical calculations are also performed to accurately model the new hybrid nanophotonic system and prove that the incorporation of plasmonic nanocavity is key to efficient SPE performance. The proposed quantum nanocavity single photon source is expected to be an element of paramount importance to the envisioned room-temperature integrated quantum photonic networks.

physics.optics↗

arXiv2024

Tailoring the Spectral and Directional Emissivity of Functionalized Laser Processed Surfaces

Development of methods to control the directional and spectral characteristics of thermal radiation from metallic surfaces is a critical factor enabling many important thermal management applications. In this paper, we study the thermal emission properties of functionalized aluminum surfaces produced through femtosecond laser surface processing (FLSP). These types of surfaces have recently been found to exhibit near-unity broadband omnidirectional emissivity. However, their ultrabroadband absorption response includes visible and near-infrared (IR) radiation, in addition to the mid-IR range, which limits their use as daytime passive radiative cooling devices. Here, we present ways to solve this problem by demonstrating a new design that uses a dielectric Bragg visible light reflector to accurately control the thermal emission spectra of the FLSP surface with the goal of achieving high performance daytime radiative cooling operation. In addition, we propose other designs based on dielectric multilayer structures to further tailor and control the spectra and thermal emission angles of the FLSP surfaces leading to narrowband and broadband directional thermal radiation. The presented photonic engineering approach combined with FLSP structures will be beneficial to various emerging applications, such as radiative cooling, thermal sensing, and thermophotovoltaics.

physics.optics↗

arXiv2024

Ultrabroadband Coherent Perfect Absorption with Composite Graphene Metasurfaces

We investigate the design and performance of a new multilayer graphene metasurface for achieving ultrabroadband coherent perfect absorption (CPA) in the THz regime. The proposed structure comprises of three graphene patterned metasurfaces separated by thin dielectric spacer layers. The top and bottom metasurfaces have cross shape unit cells with varying sizes, while the middle graphene metasurface is square-shaped. This distinctive geometrical asymmetry and the presence of multiple layers within the structure facilitate the achievement of wideband asymmetric reflection under incoherent illumination. This interesting property serves as a crucial step towards achieving near-total absorption under coherent illumination across a broad frequency range. Numerical simulations demonstrate that the absorption efficiency surpasses 90% across an ultrabroadband frequency range from 2.8 to 5.7 THz, i.e., bandwidth of 2.9 THz. The CPA effect can be selectively tuned by manipulating the phase difference between the two incident coherent beams. Moreover, the absorption response can be dynamically adjusted by altering the Fermi level of graphene. The study also examines the influence of geometric parameters on the absorption characteristics. The results of this research work offer valuable insights into the design of broadband graphene metasurfaces for coherent absorption applications, and they contribute to the advancement of sophisticated optical devices operating in the THz frequency range.

physics.optics↗

arXiv2024

Enhancing non-Perl bioinformatic applications with Perl: Building novel, component based applications using Object Orientation, PDL, Alien, FFI, Inline and OpenMP

Component-Based Software Engineering (CBSE) is a methodology that assembles pre-existing, re-usable software components into new applications, which is particularly relevant for fast moving, data-intensive fields such as bioinformatics. While Perl was used extensively in this field until a decade ago, more recent applications opt for a Bioconductor/R or Python. This trend represents a significantly missed opportunity for the rapid generation of novel bioinformatic applications out of pre-existing components since Perl offers a variety of abstractions that can facilitate composition. In this paper, we illustrate the utility of Perl for CBSE through a combination of Object Oriented frameworks, the Perl Data Language and facilities for interfacing with non-Perl code through Foreign Function Interfaces and inlining of foreign source code. To do so, we enhance Polyester, a RNA sequencing simulator written in R, and edlib a fast sequence similarity search library based on the edit distance. The first case study illustrates the near effortless authoring of new, highly performant Perl modules for the simulation of random numbers using the GNU Scientific Library and PDL, and proposes Perl and Perl/C alternatives to the Python tool cutadapt that is used to "trim" polyA tails from biological sequences. For the edlib case, we leverage the power of metaclass programming to endow edlib with coarse, process based parallelism, through the Many Core Engine (MCE) module and fine grained parallelism through OpenMP, a C/C++/Fortran Application Programming Interface for shared memory multithreaded processing. These use cases provide proof-of-concept for the Bio::SeqAlignment framework, which can organize heterogeneous components in complex memory and command-line based workflows for the construction of novel bionformatic tools to analyze data from long-read sequencing, e.g. Nanopore, sequencing platforms.

cs.MS↗

arXiv2024

Controlling the broadband enhanced light chirality with L-shaped dielectric metamaterials

The inherently weak chiroptical responses of natural materials limit their usage for controlling and enhancing chiral light-matter interactions. Recently, several nanostructures with subwavelength scale dimensions were demonstrated, mainly due to the advent of nanofabrication technologies, as a potential alternative to efficiently enhance chirality. However, the intrinsic lossy nature of metals and inherent narrowband response of dielectric planar thin films or metasurface structures pose severe limitations toward the practical realization of broadband and tailorable chiral systems. Here, we tackle these problems by designing all-dielectric silicon-based L-shaped optical metamaterials based on tilted nanopillars that exhibit broadband and enhanced chiroptical response in transmission operation. We use an emerging bottom-up fabrication approach, named glancing angle deposition, to assemble these dielectric metamaterials on a wafer scale. The reported strong chirality and optical anisotropic properties are controllable in terms of both amplitude and operating frequency by simply varying the shape and dimensions of the nanopillars. The presented nanostructures can be used in a plethora of emerging nanophotonic applications, such as chiral sensors, polarization filters, and spin-locked nanowaveguides.

physics.optics↗

arXiv2023

Nanocolumnar Material Platforms:Universal structural parameters revealed from optical anisotropy

Nanostructures represent a frontier where meticulous attention to the control and assessment of structural dimensions becomes a linchpin for their seamless integration into diverse technological applications. By using integrative and comprehensive methodical series of studies, we investigate the evolution of the depolarization factors in the anisotropic Bruggeman effective medium approximation, that are extremely sensitive to the changes in critical dimensions of the nanostructure platforms. To this end, we fabricate spatially coherent highly-ordered slanted nanocolumns from zirconia, silicon, titanium, and permalloy on silicon substrates with varying column lengths using glancing angle deposition. In tandem, broad-spectral range Mueller matrix spectroscopic ellipsometry data, spanning from the near-infrared to the vacuum ultraviolet (0.72 eV to 6.5 eV), is analyzed with a best-match model approach based on the anisotropic Bruggeman effective medium theory. We thereby extracted the anisotropic optical properties including complex dielectric function, birefringence, and dichroism. Most notably, our research unveils a universal, material-independent inverse relationship between depolarization factors and column length. We envision that the presented universal relationship will permit accurate prediction of optical properties of nanocolumnar thin films improving their integration and optimization for optoelectronic and photonic device applications.

physics.optics↗

arXiv2023

Enhanced nonlinear optical effects in drift-biased nonreciprocal graphene plasmonics

Nonlinear light-matter interactions are typically enhanced by increasing the local field and its interaction time with matter. Conventional methods to achieve these goals are based on resonances or slow-light effects. However, these methods suffer from various issues, including narrow operational bandwidths, large footprints, and material absorption. An interesting alternative approach to enhance the local field is offered by nonreciprocal systems: by blocking the path of a unidirectional wave in a terminated nonreciprocal waveguiding structure, broadband electromagnetic fields can be drastically enhanced and localized near the termination. This approach was previously studied only in three-dimensional gyrotropic material platforms where the need for external magnets and bulky materials make it less practical. Here, instead, we employ a magnet-free mechanism to break reciprocity in 2D plasmonic materials, e.g., graphene. Specifically, we employ high-speed drifting electrons on a voltage-biased graphene sheet to lift the forward/backward degeneracy of the surface plasmon-polariton dispersion, creating modes with different propagation properties parallel and antiparallel to the current. We show that controllable, asymmetric, and intense field hot-spots are generated at the edges of a suitably terminated graphene metasurface. We then theoretically demonstrate that such asymmetric field hot-spots offer an effective solution to enhance third-order nonlinear optical effects. As an example, we predict that, using realistic values of drift velocity, high third-harmonic conversion efficiencies of up to 0.3 percent are achievable around the plasmon resonance frequencies.

physics.optics↗

arXiv2023

Hybrid Graphene-Plasmon Gratings

Graphene can support surface plasmons with higher confinement, lower propagation loss, and substantially more tunable response compared to usual metal-based plasmonic structures. Interestingly, plasmons in graphene can strongly couple with nanostructures and gratings placed in its vicinity to form new hybrid systems that can provide a platform to investigate more complicated plasmonic phenomena. In this Perspective, an analysis on the excitation of highly confined graphene plasmons and their strong coupling with metallic or dielectric gratings is performed. We emphasize the flexibility in the efficient control of light-matter interaction by these new hybrid systems, benefiting from the interplay between graphene plasmons and other external resonant modes. The hybrid graphene-plasmon grating systems offer unique tunable plasmonic resonances with enhanced field distributions. They exhibit a novel route to realize practical emerging applications, including nonreciprocal devices, plasmonic switches, perfect absorbers, nonlinear structures, photodetectors, and optical sensors.

physics.optics↗

arXiv2023

The Letter Pi : Bayesian interpretation of p-values, Reproducibility and Considerations for Replication in the Generalized Linear Model

Significance testing based on p-values has been implicated in the reproducibility crisis in scientific research, with one of the proposals being to eliminate them in favor of Bayesian analyses. Defenders of the p-values have countered that it is the improper use and errors in interpretation, rather than the p-values themselves that are to blame. Similar exchanges about the role of p-values have occurred with some regularity every 10 to 15 years since their formal introduction in statistical practice. The apparent contradiction between the repeated failures in interpretation and continuous use of p-values suggest that there is an inferential value in the computation of these values. In this work we propose to attach a radical Bayesian interpretation to the number computed and reported as a p-value for the Generalized Linear Model, which has been the workhorse of applied statistical work. We introduce a decision analytic framework for thresholding posterior tail areas (pi-values) which for any given Bayesian analysis will have a direct correspondence to p-values in non-Bayesian approaches. Pi-values are non-controversial, posterior probability summaries of treatment effects. A predictive probability argument is made to justify the exploration of the stochastic variation (replication probability) of p and pi-values and culminates into a concrete proposal for the synthesis of Likelihood and Bayesian approaches to data analyses that aim for reproducibility. We illustrate these concepts using the results of recent randomized controlled trials in cardiometabolic and kidney diseases and provide R code for the implementation of the proposed methodology.

stat.ME↗