arXiv subjects

Christopher Betters

Publications and source records attributed to Christopher Betters.

14 recordsLinked to original sources

arXiv2026

Towards High-Throughput Visible Photonic Lanterns for the EMARCOT Project

Photonic EMARCOT is an innovative project involving Spanish, German and Australian research institutes that aims to integrate multiple Optical Tube Assemblies (OTAs) using photonic lanterns. The "Pathfinder" prototype, featuring seven OTAs with a 1.1-meter effective aperture, will feed a spectrograph at the Calar Alto Observatory, with first light expected in 2026. We report the fabrication and experimental evaluation of a custom 7x1 multi-mode photonic lantern (MMPL) developed for this framework, featuring seven 25 um core multi-mode inputs merging into a single 50 um core multi-mode output optimized for the visible wavelength range (400-700 nm). Optical characterization centered at 600 nm reveals exceptional channel-to-channel uniformity, with statistical variations close to zero across both bare-fiber and connectorized MMPL configurations. However, the total baseline throughput of this initial device was limited to below 4%. From the refractive index studies, this low throughput is attributed to severe refractive index mismatch between the internal fiber cladding geometry and the structural capillary, which suppresses total internal reflection during the tapering transition. This work establishes an important diagnostic baseline that highlights the necessary fabrication tolerances needed to improve future high-throughput manufacturing processes for precision radial-velocity astronomy.

astro-ph.IM↗

arXiv2026

Demonstration of a multimode-to-multimode photonic lantern for astronomy

Photonic lanterns have been widely used in astronomy as low-loss multiplexing devices, typically coupling light from a multimode input into several single-mode outputs. In this work, we present the first multimode-to-multimode photonic lantern specifically designed to combine light from several multimode fibers into a single multimode waveguide. We fabricated and characterized the devices at multiple wavelengths to evaluate the performance of the adiabatic multimode transition. The measured efficiencies exceed $90\ \%$, demonstrating low-loss multimode propagation and efficient modal transfer through the lantern structure. This architecture enables efficient multimode beam combination and represents a significant step toward scalable modular telescope concepts without requiring diffraction-limited injection.

astro-ph.IM↗

arXiv2026

Empirical verification of principal mode orthogonality and relative phase calibration in photonic lanterns

Photonic lanterns efficiently map input spatial modes to single-mode outputs for applications like high angular resolution imaging and nulling interferometry. However, manufacturing limits prevent full control over the device's mode transfer matrix at the design stage, making empirical characterisation essential. In this work we further analyse a dataset of direct measurements of a photonic lantern's principal modes using digital off-axis holography over a 73 nm range near 1550 nm. By analysing the electric field directly, we find that the principal modes are significantly more orthogonal than random vectors in a space of the same size, as expected for near-adiabatic devices. We propose metrics for quantifying this effect, noting that mode converters with orthogonal principal modes provide better conditioned inverse solvers. We also simulate additional measurements that characterisation systems could take, where the orthogonality would be leveraged to determine the relative phase between principal modes.

physics.optics↗

arXiv2026

The TOLIMAN mission: A low-cost space telescope for high precision narrow-angle astrometry

The TOLIMAN project is engaged with the construction, launch and operation of a low-cost space telescope of unorthodox optical design. Its primary science goal targets an exhaustive search for temperate-orbit rocky planets around either star in the alpha Centauri AB binary within our nearest-neighbor star system. Despite their favorable proximity and brightness, the detection of terrestrial exoplanets around such nearby Sun-like stars remains problematic for contemporary instrumental approaches. By performing narrow-angle astrometric monitoring of binary stars at extreme precision, any exoplanets will betray their presence by way of gravitationally-induced perturbations on the binary orbit. Recovery of this signal is challenging for it amounts to only a few microarcseconds of angular deflection (at best), and so is normally thought to require a large (meter-class) instrument. By implementing an innovative optical and signal encoding architecture, the TOLIMAN space telescope aims to recover such signals with a telescope aperture of only 12.5cm. This paper gives an overview of key features of the mission; in particular the concepts underlying the optics to enable image registration at the extreme levels of precision required. An outline is also provided, sketching further mission components and systems incorporated into the 16U CubeSat spacecraft bus in which the science payload is housed - all of which are now under construction.

astro-ph.IM↗

arXiv2025

Illuminating the lantern: coherent, spectro-polarimetric characterisation of a multimode converter

While photonic lanterns efficiently and uniquely map a set of input modes to single-mode outputs (or vice versa), the optical mode transfer matrix of any particular fabricated device cannot be constrained at the design stage due to manufacturing imperfections. Accurate knowledge of the mapping enables complex sensing or beam control applications that leverage multimode conversion. In this work, we present a characterisation system to directly measure the electric field from a photonic lantern using digital off-axis holography, following its evolution over a 73 nm range near 1550 nm and in two orthogonal, linear polarisations. We provide the first multi-wavelength, polarisation decomposed characterisation of the principal modes of a photonic lantern. Performance of our testbed is validated on a single-mode fibre then harnessed to characterise a 19-port, multicore fibre fed photonic lantern. We uncover the typical wavelength scale at which the modal mapping evolves and measure the relative dispersion in the device, finding significant differences with idealised simulations. In addition to detailing the system, we also share the empirical mode transfer matrices, enabling future work in astrophotonic design, computational imaging, device fabrication feedback loops and beam shaping.

physics.optics↗

arXiv2025

Experimental and on-sky demonstration of spectrally dispersed wavefront sensing using a photonic lantern

Adaptive optics systems are critical in any application where highly resolved imaging or beam control must be performed through a dynamic medium. Such applications include astronomy and free-space optical communications, where light propagates through the atmosphere, as well as medical microscopy and vision science, where light propagates through biological tissue. Recent works have demonstrated common-path wavefront sensors for adaptive optics using the photonic lantern, a slowly varying waveguide that can efficiently couple multi-moded light into single-mode fibers. We use the SCExAO astrophotonics platform at the 8-m Subaru Telescope to show that spectral dispersion of lantern outputs can improve correction fidelity, culminating with an on-sky demonstration of real-time wavefront control. To our best knowledge, this is the first such result for either a spectrally dispersed or a photonic lantern wavefront sensor. Combined with the benefits offered by lanterns in precision spectroscopy, our results suggest the future possibility of a unified wavefront sensing spectrograph using compact photonic devices.

astro-ph.IM↗

arXiv2024

Spectral characterization of a 3-port photonic lantern for application to spectroastrometry

Spectroastrometry, which measures wavelength-dependent shifts in the center of light, is well-suited for studying objects whose morphology changes with wavelength at very high angular resolutions. Photonic lantern (PL)-fed spectrometers have potential to enable measurement of spectroastrometric signals because the relative intensities between the PL output SMFs contain spatial information on the input scene. In order to use PL output spectra for spectroastrometric measurements, it is important to understand the wavelength-dependent behaviors of PL outputs and develop methods to calibrate the effects of time-varying wavefront errors in ground-based observations. We present experimental characterizations of the 3-port PL on the SCExAO testbed at the Subaru Telescope. We develop spectral response models of the PL and verify the behaviors with lab experiments. We find sinusoidal behavior of astrometric sensitivity of the 3-port PL as a function of wavelength, as expected from numerical simulations. Furthermore, we compare experimental and numerically simulated coupling maps and discuss their potential use for offsetting pointing errors. We then present a method of building PL spectral response models (solving for the transfer matrices as a function of wavelength) using coupling maps, which can be used for further calibration strategies.

astro-ph.IM↗

arXiv2023

Real-time experimental demonstrations of a photonic lantern wavefront sensor

The direct imaging of an Earth-like exoplanet will require sub-nanometric wavefront control across large light-collecting apertures, to reject host starlight and detect the faint planetary signal. Current adaptive optics (AO) systems, which use wavefront sensors that reimage the telescope pupil, face two challenges that prevent this level of control: non-common-path aberrations (NCPAs), caused by differences between the sensing and science arms of the instrument; and petaling modes: discontinuous phase aberrations caused by pupil fragmentation, especially relevant for the upcoming 30-m class telescopes. Such aberrations drastically impact the capabilities of high-contrast instruments. To address these issues, we can add a second-stage wavefront sensor to the science focal plane. One promising architecture uses the photonic lantern (PL): a waveguide that efficiently couples aberrated light into single-mode fibers (SMFs). In turn, SMF-confined light can be stably injected into high-resolution spectrographs, enabling direct exoplanet characterization and precision radial velocity measurements; simultaneously, the PL can be used for focal-plane wavefront sensing. We present a real-time experimental demonstration of the PL wavefront sensor on the Subaru/SCExAO testbed. Our system is stable out to around ~400 nm of low-order Zernike wavefront error, and can correct petaling modes. When injecting ~30 nm RMS of low order time-varying error, we achieve ~10x rejection at 1 s timescales; further refinements to the control law and lantern fabrication process should make sub-nanometric wavefront control possible. In the future, novel sensors like the PLWFS may prove to be critical in resolving the wavefront control challenges posed by exoplanet direct imaging.

astro-ph.IM↗

arXiv2023

Spectroastrometry and Imaging Science with Photonic Lanterns on Extremely Large Telescopes

Photonic lanterns (PLs) are tapered waveguides that gradually transition from a multi-mode fiber geometry to a bundle of single-mode fibers. In astronomical applications, PLs can efficiently couple multi-mode telescope light into a multi-mode fiber entrance and convert it into multiple single-mode beams. The output beams are highly stable and suitable for feeding into high-resolution spectrographs or photonic chip beam combiners. For instance, by using relative intensities in the output cores as a function of wavelength, PLs can enable spectroastrometry. In addition, by interfering beams in the output cores with a beam combiner in the backend, PLs can be used for high-throughput interferometric imaging. When used on an Extremely Large Telescope (ELT), with its increased sensitivity and angular resolution, the imaging and spectroastrometric capabilities of PLs will be extended to higher contrast and smaller angular scales. We study the potential spectroastrometry and imaging science cases of PLs on ELTs, including study of exomoons, broad-line regions of quasars, and inner circumstellar disks.

astro-ph.IM↗

arXiv2023

Demonstration of a photonic lantern focal-plane wavefront sensor: measurement of atmospheric wavefront error modes and low wind effect in the non-linear regime

Here we present a laboratory analysis of the use of a 19-core photonic lantern (PL) in combination with neural network (NN) algorithms as an efficient focal plane wavefront sensor (FP-WFS) for adaptive optics (AO), measuring wavefront errors such as low wind effect (LWE), Zernike modes and Kolmogorov phase maps. The aberrated wavefronts were experimentally simulated using a Spatial Light Modulator (SLM) with combinations of different phase maps in both the linear regime (average incident RMS wavefront error (WFE) of 0.88 rad) and in the non-linear regime (average incident RMS WFE of 1.5 rad). Results were analysed using a NN to determine the transfer function of the relationship between the incident wavefront error (WFE) at the input modes at the multimode input of the PL and the intensity distribution output at the multicore fibre outputs end of the PL. The root mean square error (RMSE) of the reconstruction of petal and LWE modes were just $2.87\times10^{-2}$ rad and $2.07\times10^{-1}$ rad respectively, in the non-linear regime. The reconstruction RMSE for Zernike combinations ranged from $5.67\times10^{-2}$ rad to $8.43\times10^{-1}$ rad, depending on the number of Zernike terms and incident RMS WFE employed. These results demonstrate the promising potential of PLs as an innovative FP-WFS in conjunction with NNs.

physics.optics↗

arXiv2021

Seeking celestial Positronium with an OH-suppressed diffraction-limited spectrograph

Celestially, Positronium (Ps), has only been observed through gamma-ray emission produced by its annihilation. However, in its triplet state, a Ps atom has a mean lifetime long enough for electronic transitions to occur between quantum states. This produces a recombination spectrum observable in principle at near IR wavelengths, where angular resolution greatly exceeding that of the gamma-ray observations is possible. However, the background in the NIR is dominated by extremely bright atmospheric hydroxyl (OH) emission lines. In this paper we present the design of a diffraction-limited spectroscopic system using novel photonic components - a photonic lantern, OH Fiber Bragg Grating filters, and a photonic TIGER 2-dimensional pseudo-slit - to observe the Ps Balmer alpha line at 1.3122 microns for the first time.

astro-ph.IM↗

arXiv2019

Astro2020: Astrophotonics White Paper

Astrophotonics is the application of versatile photonic technologies to channel, manipulate, and disperse guided light from one or more telescopes to achieve scientific objectives in astronomy in an efficient and cost-effective way. The developments and demands from the telecommunication industry have driven a major boost in photonic technology and vice versa in the last 40 years. The photonic platform of guided light in fibers and waveguides has opened the doors to next-generation instrumentation for both ground- and space-based telescopes in optical and near/mid-IR bands, particularly for the upcoming extremely large telescopes (ELTs). The large telescopes are pushing the limits of adaptive optics to reach close to a near-diffraction-limited performance. The photonic devices are ideally suited for capturing this AO-corrected light and enabling new and exciting science such as characterizing exoplanet atmospheres. The purpose of this white paper is to summarize the current landscape of astrophotonic devices and their scientific impact, highlight the key issues, and outline specific technological and organizational approaches to address these issues in the coming decade and thereby enable new discoveries as we embark on the era of extremely large telescopes.

astro-ph.IM↗

arXiv2017

Mapping the aberrations of a wide-field spectrograph using a photonic comb

We demonstrate a new approach to calibrating the spectral-spatial response of a wide-field spectrograph using a fibre etalon comb. Conventional wide-field instruments employed on front-line telescopes are mapped with a grid of diffraction-limited holes cut into a focal plane mask. The aberrated grid pattern in the image plane typically reveals n-symmetric (e.g. pincushion) distortion patterns over the field arising from the optical train. This approach is impractical in the presence of a dispersing element because the diffraction-limited spots in the focal plane are imaged as an array of overlapping spectra. Instead we propose a compact solution that builds on recent developments in fibre-based Fabry-Perot etalons. We introduce a novel approach to near-field illumination that exploits a 25cm commercial telescope and the propagation of skew rays in a multimode fibre. The mapping of the optical transfer function across the full field is represented accurately (<0.5% rms residual) by an orthonormal set of Chebyshev moments. Thus we are able to reconstruct the full 4Kx4K CCD image of the dispersed output from the optical fibres using this mapping, as we demonstrate. Our method removes one of the largest sources of systematic error in multi-object spectroscopy.

astro-ph.IM↗

arXiv2016

The GALAH survey: The data reduction pipeline

We present the data reduction procedures being used by the GALAH survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9~m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V=14 at a resolution of 28,000 with a goal to measure the abundances of 29 elements. Such a large number of high resolution spectra necessitates the development of a reduction pipeline optimized for speed, accuracy, and consistency. We outline the design and structure of the Iraf-based reduction pipeline that we developed, specifically for GALAH, to produce fully calibrated spectra aimed for subsequent stellar atmospheric parameter estimation. The pipeline takes advantage of existing Iraf routines and other readily available software so as to be simple to maintain, testable and reliable. A radial velocity and stellar atmospheric parameter estimator code is also presented, which is used for further data analysis and yields a useful verification of the reduction quality. We have used this estimator to quantify the data quality of GALAH for fibre cross-talk level ($\lesssim0.5$%) and scattered light ($\sim5$ counts in a typical 20 minutes exposure), resolution across the field, sky spectrum properties, wavelength solution reliability (better than $1$ $\mathrm{km\ s^{-1}}$ accuracy) and radial velocity precision.

astro-ph.IM↗