arXiv subjects

Christof Neumann

Publications and source records attributed to Christof Neumann.

11 recordsLinked to original sources

arXiv2026

Sonochemically Boosted Hydrogen Evolution Activity of Janus TMD Monolayers

2D electrocatalysts that enable hydrogen evolution at low overpotentials offer an attractive alternative to expensive platinum-based systems. Here, we report the growth of Janus transition metal dichalcogenide (TMD) monolayers (MLs), SeMoS and SeWS, on Au foils using chemical vapor deposition, and systematically compare their catalytic properties in the context of hydrogen evolution reaction (HER) with those of their parent TMDs. The Janus MLs exhibited significantly enhanced catalytic performance relative to the parent TMDs. Furthermore, these MLs on Au foils were subjected to sonochemical treatment in polar and non-polar solvents, in which the treatment with polar solvents led to a substantial improvement in the HER activity of Janus MLs. In particular, SeMoS MLs treated with water showed a low overpotential of ~63 mV, a Tafel slope of ~42 mV/dec, and an exchange current density of ~10$^{-3}$ mA cm$^{- 2}$, approaching that of platinum. Analyses indicate that enhanced electrocatalytic activity is associated with tensile strain induced by Au surface restructuring and the formation of defects in Janus MLs, as shown by experimental observations and by density functional theory calculations. The enhancement in catalytic performance due to sonochemical treatment emphasizes the importance of our results for developing novel catalytic systems for HER based on Janus 2D materials.

cond-mat.mtrl-sci↗

arXiv2026

CVD Grown Hybrid MoSe$_2$-WSe$_2$ Lateral/Vertical Heterostructures with Strong Interlayer Exciton Emission

Lateral heterostructures of 2D transition metal dichalcogenide offer a powerful platform to investigate photonic and electronic phenomena at atomically sharp interfaces. However, their controlled engineering, including tuning lateral domain size and integration into vertical van der Waals heterostructures with other 2D materials, remains challenging. Here, we present a facile route for the synthesis of two types of heterostructures consisting of monolayers of MoSe$_2$ and WSe$_2$ - purely lateral (HS I) and hybrid lateral/vertical (HS II) - using liquid precursors of transition metal salts and chemical vapor deposition (CVD). Depending on the growth parameters, the heterostructure type and their lateral dimensions can be adjusted. We characterized properties of the HS I and HS II by complementary spectroscopic and microscopic techniques including Raman and photoluminescence spectroscopy, and optical and atomic force microscopy, and scanning electron and transmission electron microscopy. The photoluminescence measurements reveal strong interlayer exciton emission in the MoSe$_2$/WSe$_2$ region of HS II, which dominates the spectrum at 4 K and persisting up to room temperature. These results demonstrate high optical quality of the grown heterostructures which in combination with scalability of the developed approach paves the way for fundamental studies and device applications based on these unique 2D quantum materials.

cond-mat.mtrl-sci↗

arXiv2026

Ultrasensitive Real-Time Detection of SARS-CoV-2 Proteins with Arrays of Biofunctionalized Graphene Field-Effect Transistors

With the growing interest in graphene field-effect transistors (GFETs) for biosensing applications, there is a strong demand for strategies enabling flexible and multiplexed biofunctionalization, as well as highly parallel, real-time electronic readout integrated with microfluidic control. Here we present a methodology that addresses these challenges by enabling real-time, parallel monitoring of multiple GFETs integrated on a single microfabricated chip within an automated electronic and microfluidic platform. We demonstrate the capabilities of this approach through ultrasensitive detection of the SARS-CoV-2 spike (S) and nucleocapsid (N) proteins. GFET chips are functionalized via van der Waals assembly using 1 nm-thick molecular two-dimensional (2D) materials - carbon nanomembranes - which enable multiplexed biofunctionalization. The chips are integrated into a custom-developed microelectronic and microfluidic system that allows parallel, real-time, and automated measurements of 15 GFETs. We present in situ biofunctionalization of the GFETs with antibodies, followed by highly specific detection of the S- and N-proteins with limits of detection down to 10 aM and a dynamic range spanning four orders of magnitude. Owing to its versatility, the presented methodology is readily adaptable for sensing a wide range of biological and chemical targets.

physics.bio-ph↗

arXiv2022

Gas transport mechanisms through molecularly thin membranes

Atomically thin molecular carbon nanomembranes (CNMs) with intrinsic sub-nanometer porosity are considered as promising candidates for next generation filtration and gas separation applications due to their extremely low thickness, energy efficiency and selectivity. CNMs are intrinsically porous which is advantageous over other 2D materials such as graphene and transition metal dichalcogenides where defects and pores need to be introduced after synthesis. It was already discovered that water and helium permeate through 4,4-terphenylthiol (TPT) CNM above the limit of detection. Additionally, the permeation of water vapour was nonlinear against its pressure and 1000 stronger than permeation of helium despite their similar kinetic diameters. However, there was no clear permeation mechanism which could explain permeation of both species. Here, we demonstrate that permeation of all gas species is defined by their adsorption. We performed gas permeation measurements through TPT CNM at different temperatures and found that all measured gases experienced an activation energy barrier which correlated with their kinetic diameters. Furthermore, we identified that entropy loss during adsorption and permeation is the fundamental reason of strong nonlinear permeation of water. Our results also demonstrated that adsorption plays a major role in permeation of all gases, not just water.

cond-mat.mes-hall↗

arXiv2022

Tuning nanowire lasers via hybridization with two-dimensional materials

Mixed dimensional hybrid structures have recently gained increasing attention as promising building blocks for novel electronic and optoelectronic devices. In this context, hybridization of semiconductor nanowires with two-dimensional materials could offer new ways to control and modulate lasing at the nanoscale. In this work, we deterministically fabricate hybrid mixed-dimensional heterostructures composed of ZnO nanowires and MoS2 monolayers with micrometer control over their relative position. First, we show that our deterministic fabrication method does not degrade the optical properties of the ZnO nanowires. Second, we demonstrate that the lasing wavelength of ZnO nanowires can be tuned by several nanometers by hybridization with CVD-grown MoS2 monolayers. We assign this spectral shift of the lasing modes to an efficient carrier transfer at the heterointerface and the subsequent increase of the optical band gap in ZnO (Moss-Burstein effect).

physics.optics↗

arXiv2022

One pot chemical vapor deposition of high optical quality large area monolayer Janus transition metal dichalcogenides

We report one-pot chemical vapor deposition (CVD) growth of large-area Janus SeMoS monolayers, with the asymmetric top (Se) and bottom (S) chalcogen atomic planes with respect to the central transition metal (Mo) atoms. The formation of these two-dimensional semiconductor monolayers takes place upon the thermodynamic equilibrium-driven exchange of the bottom Se atoms of the initially grown MoSe2 single crystals on gold foils with S atoms. The growth process is characterized by complementary experimental techniques including Raman and X-ray photoelectron spectroscopy and the growth mechanisms are rationalized by first principle calculations. The remarkably high optical quality of the synthesized Janus monolayers is demonstrated by optical and magneto-optical measurements which reveal the strong exciton-phonon coupling and enable to obtain the exciton g-factor of -3.3.

cond-mat.mtrl-sci↗

arXiv2020

Proton and Li-Ion Permeation through Graphene with Eight-Atom-Ring Defects

Defect-free graphene is impermeable to gases and liquids but highly permeable to thermal protons. Atomic-scale defects such as vacancies, grain boundaries and Stone-Wales defects are predicted to enhance graphene's proton permeability and may even allow small ions through, whereas larger species such as gas molecules should remain blocked. These expectations have so far remained untested in experiment. Here we show that atomically thin carbon films with a high density of atomic-scale defects continue blocking all molecular transport, but their proton permeability becomes ~1,000 times higher than that of defect-free graphene. Lithium ions can also permeate through such disordered graphene. The enhanced proton and ion permeability is attributed to a high density of 8-carbon-atom rings. The latter pose approximately twice lower energy barriers for incoming protons compared to the 6-atom rings of graphene and a relatively low barrier of ~0.6 eV for Li ions. Our findings suggest that disordered graphene could be of interest as membranes and protective barriers in various Li-ion and hydrogen technologies.

cond-mat.mtrl-sci↗

arXiv2020

Scalable functionalization of optical fibers using atomically thin semiconductors

Atomically thin transition metal dichalcogenides are highly promising for integrated optoelectronic and photonic systems due to their exciton-driven linear and nonlinear interaction with light. Integrating them into optical fibers yields novel opportunities in optical communication, remote sensing, and all-fiber optoelectronics. However, scalable and reproducible deposition of high quality monolayers on optical fibers is a challenge. Here, we report the chemical vapor deposition of monolayer MoS2 and WS2 crystals on the core of microstructured exposed core optical fibers and their interaction with the fibers' guided modes. We demonstrate two distinct application possibilities of 2D-functionalized waveguides to exemplify their potential. First, we simultaneously excite and collect excitonic 2D material photoluminescence with the fiber modes, opening a novel route to remote sensing. Then we show that third harmonic generation is modified by the highly localized nonlinear polarization of the monolayers, yielding a new avenue to tailor nonlinear optical processes in fibers. We anticipate that our results may lead to significant advances in optical fiber based technologies.

physics.app-ph↗

arXiv2019

Accessing high optical quality of MoS2 monolayers grown by chemical vapor deposition

Chemical vapor deposition (CVD) allows growing transition metal dichalcogenides (TMDs) over large surface areas on inexpensive substrates. In this work, we correlate the structural quality of CVD grown MoS$_2$ monolayers (MLs) on SiO$_2$/Si wafers studied by high-resolution transmission electron microscopy (HRTEM) with high optical quality revealed in optical emission and absorption from cryogenic to ambient temperatures. We determine a defect concentration of the order of 10$^{13}$ cm$^{-2}$ for our samples with HRTEM. To have access to the intrinsic optical quality of the MLs, we remove the MLs from the SiO$_2$ growth substrate and encapsulate them in hBN flakes with low defect density, to reduce the detrimental impact of dielectric disorder. We show optical transition linewidth of 5 meV at low temperature (T=4 K) for the free excitons in emission and absorption. This is comparable to the best ML samples obtained by mechanical exfoliation of bulk material. The CVD grown MoS$_2$ ML photoluminescence is dominated by free excitons and not defects even at low temperature. High optical quality of the samples is further confirmed by the observation of excited exciton states of the Rydberg series. We optically generate valley coherence and valley polarization in our CVD grown MoS$_2$ layers, showing the possibility for studying spin and valley physics in CVD samples of large surface area.

cond-mat.mes-hall↗

arXiv2018

Large-area fabrication of low- and high-spatial-frequency laser-induced periodic surface structures on carbon fibers

The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $\tau$ = 300 fs and a laser wavelength $\lambda$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology of the generated structures was characterized by using scanning electron microscopy, atomic force microscopy and Fast-Fourier transform analyses. Moreover, the material structure and the surface chemistry of the carbon fibers before and after laser irradiation was analyzed by micro Raman spectroscopy and X-ray photoelectron spectroscopy. Large areas in the cm$^{2}$ range of carbon fiber arrangements were successfully processed with homogenously distributed high- and low-spatial frequency LIPSS. Beyond those distinct nanostructures, hybrid structures were realized for the very first time by a superposition of both types of LIPSS in a two-step process. The findings facilitate the fabrication of tailored LIPSS-based surface structures on carbon fibers that could be of particular interest for e.g. fiber reinforced polymers and concretes.

cond-mat.mtrl-sci↗

arXiv2018

Lateral heterostructures of two-dimensional materials by electron-beam induced stitching

We present a novel methodology to synthesize two-dimensional (2D) lateral heterostructures of graphene and MoS2 sheets with molecular carbon nanomembranes (CNMs), which is based on electron beam induced stitching. Monolayers of graphene and MoS2 were grown by chemical vapor deposition (CVD) on copper and SiO2 substrates, respectively, transferred onto gold/mica substrates and patterned by electron beam lithography or photolithography. Self-assembled monolayers (SAMs) of aromatic thiols were grown on the gold film in the areas where the 2D materials were not present. An irradiation with a low energy electron beam was employed to convert the SAMs into CNMs and simultaneously stitching the CNM edges to the edges of graphene and MoS2, therewith forming a heterogeneous but continuous film composed of two different materials. The formed lateral heterostructures possess a high mechanical stability, enabling their transfer from the gold substrate onto target substrates and even the preparation as freestanding sheets. We characterized the individual steps of this synthesis and the structure of the final heterostructures by complementary analytical techniques including optical microscopy, Raman spectroscopy, atomic force microscopy (AFM), helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) and find that they possess nearly atomically sharp boundaries.

cond-mat.mes-hall↗