arXiv subjects

Christian L. Degen

Publications and source records attributed to Christian L. Degen.

At least 19 recordsLinked to original sources

arXiv2026

Nanoscale NMR of DNA-Functionalized Diamond Using Individual NV Centers

Nuclear magnetic resonance (NMR) spectroscopy is a powerful probe of molecular structure and dynamics but typically requires large spin ensembles. Here, we demonstrate nanoscale NMR detection of fluorinated DNA using individual near-surface nitrogen-vacancy (NV) centers in diamond nanopillar waveguides under ambient conditions. We covalently tether $^{19}$F-labeled oligonucleotides to mixed nitrogen- and oxygen-terminated surfaces, localizing target spins within the nanoscale sensing volume. Probabilistic spin simulations suggest that the measured signals are consistent with those expected from a few molecules and depend strongly on NV-molecule separation, configuration, and local surface heterogeneity. These results establish a framework for NMR of surface-tethered biomolecules and identify key challenges for single-molecule structural elucidation.

physics.ins-det↗

arXiv2026

Chiral magnons for spin-qubit state transfer

We propose a protocol where chiral magnons mediate a state transfer between two distant spin qubits. The protocol is implemented by varying the coupling between the spin qubits and the magnons in time, such that an arbitrary state is transferred from one qubit to the other. The modulation of the coupling is performed such that the two-spin-qubit state is kept as a dark state of the magnon bath, bypassing the associated losses. We show that the protocol can be realized on a hybrid system composed of two nitrogen-vacancy (NV) centers coupled to the nonreciprocal and chiral magnon modes of an yttrium iron garnet (YIG) stripe. We propose two methods to achieve the time modulation of the NV-magnon coupling: i) the NV-magnet distance of both NV centers is varied; ii) the external magnetic field and the NV-magnet distance of one NV center are varied. We evaluate the implementability of both methods numerically, including the constraints on the temperature, and the dephasing time and minimal lifetime of the spin qubits required for high-fidelity state transfer. We find that using realistic experimental parameters, a state transfer between NV centers at a distance of several microns can be achieved with a fidelity $\gtrsim 0.95$. Our findings expand the toolbox of magnonics for quantum information purposes.

quant-ph↗

arXiv2026

Determination of the intrinsic mechanical quality factor in high-stress silicon nitride resonators

Recent advances in silicon nitride nanomechanical resonators have pushed mechanical quality factors to ultra-high values by combining stress-induced dissipation dilution with mode-shape engineering. Neither mechanism alters the intrinsic quality factor $Q_{\mathrm{intr}}$. Targeting the intrinsic loss itself therefore remains an untapped route to even higher $Q$. Doing so first requires reliable quantification of $Q_{\mathrm{intr}}$, which has proven challenging. Here we present a robust methodology that quantifies $Q_{\mathrm{intr}}$ by combining automated mode identification with systematic ringdown measurements over a large number of mechanical modes. Applied to high-stress silicon nitride membranes, it reveals a systematic dependence of $Q_{\mathrm{intr}}$ on thickness that cannot be described using established models, particularly in the ultra-thin limit. We account for this trend with a phenomenological model that incorporates a thickness-dependent loss channel. Together, our method and model open a route toward a microscopic understanding of intrinsic dissipation and toward directly mitigating its loss channels.

physics.app-ph↗

arXiv2026

Spin counting via projection noise measurement of mesoscopic solid-state spin ensemble

Quantum projection noise is the fundamental noise source for the population measurement of spin ensembles. While projection-noise-limited measurements have been extensively studied in atomic systems, corresponding experiments on solid-state spin ensembles remain challenging due to dominant classical readout noise. Here, we report direct measurement of the quantum projection noise of mesoscopic ensembles of nitrogen-vacancy (NV) spin defects at room temperature. Our experiment is enabled by a high optically-detected magnetic resonance (ODMR) contrast of over 20% for a single crystallographic orientation of the defect spins, obtained by combining polarization-selective optical excitation with spin-to-charge conversion. We use our protocol to demonstrate projection noise measurements and spin counting from nanoscale NV ensembles of up to 43 spins. We further demonstrate that the protocol allows for significant gains in sensitivity for magnetometry applications without need for cryogenic operation or high bias magnetic fields.

quant-ph↗

arXiv2026

High-mobility inertial domain walls driven by spin-transfer torque in a ferrimagnetic spinel oxide

Efficient electrical manipulation of domain walls is key to developing magnetic devices with fast switching capabilities and low energy consumption. Here we demonstrate Bloch-type domain wall velocities exceeding 1 km s$^{-1}$ in the single-layer ferrimagnetic spinel oxide NiCo$_2$O$_4$ induced by spin-transfer torque at a current density of $2 \times 10^{11}$ A m$^{-2}$. This exceptional domain wall mobility is attributed to the combination of giant nonadiabatic spin-transfer torque, low magnetization, and high spin polarization. Additionally, we report a pronounced domain wall inertia effect in this ferrimagnet due to the large nonadiabaticity of the torque. The characteristic time for domain wall acceleration and deceleration is $\sim 1$ ns, shorter than that reported for typical ferromagnets. Our findings highlight the potential of spinel oxides as a promising platform for engineering high-performance domain wall devices that take advantage of ultrafast ferrimagnetic dynamics.

cond-mat.mes-hall↗

arXiv2026

Coherent Microwave Driving of Domain Wall Depinning in a Ferrimagnetic Garnet

Coherent control of domain wall dynamics offers a route to fast manipulation of magnetic textures beyond thermally activated motion. We demonstrate resonant excitation of linear and nonlinear dynamics of a pinned domain wall in a ferrimagnetic garnet thin film driven by a microwave field. Using scanning nitrogen-vacancy magnetometry and nonlocal spin-pumping measurements, we identify a low-frequency mode inside the magnon gap, originating from the localized oscillatory motion of a domain wall across a pinning line defined by a Pt stripline. Upon increasing the microwave drive into the nonlinear regime, this mode enables domain wall depinning at reduced external magnetic fields. Micromagnetic simulations reveal a progression from localized oscillations to partial relocation between pinning sites and, ultimately, complete escape from the pinning region with increasing driving power. These results establish resonant excitation of domain walls at engineered pinning sites as a mechanism for manipulating magnetic textures via localized nonlinear dynamics.

cond-mat.mes-hall↗

arXiv2025

From Cantilevers to Membranes: Advanced Scanning Protocols for Magnetic Resonance Force Microscopy

Magnetic Resonance Force Microscopy (MRFM) enables three-dimensional imaging of nuclear spin densities in nanoscale objects. Based on numerical simulations, we evaluate the performance of strained SiN resonators as force sensors and show that their out-of-plane oscillation direction improves the quality of the reconstructed sample. We further introduce a multislice, compressed-sensing scan protocol that maximizes the information obtained for a given measurement time. Our simulations predict that these new scanning protocols and optimized algorithms can shorten the total acquisition time by up to two orders of magnitude while maintaining the reconstruction fidelity. Our results demonstrate that combining advanced scanning protocols with state-of-the-art resonators is a promising path toward high-resolution MRFM for volumetric imaging of biological nanostructures.

physics.app-ph↗

arXiv2025

Near-resonant nuclear spin detection with megahertz mechanical resonators

Mechanical resonators operating in the megahertz range have become a versatile platform for fundamental and applied quantum research. Their exceptional properties, such as low mass and high quality factor, make them also appealing for force sensing experiments. In this work, we propose a method for detecting, and ultimately controlling, nuclear spins by coupling them to megahertz resonators via a magnetic field gradient. Dynamical backaction between the sensor and an ensemble of $N$ nuclear spins produces a shift in the sensor's resonance frequency. The mean frequency shift due to the Boltzmann polarization is challenging to measure in nanoscale sample volumes. Here, we show that the fluctuating polarization of the spin ensemble results in a measurable increase of the resonator's frequency variance. On the basis of analytical as well as numerical results, we predict that the variance measurement will allow single nuclear spin detection with existing resonator devices.

cond-mat.mes-hall↗

arXiv2025

Observation and Control of Chiral Spin Frustration in BiYIG Thin Films

Chiral interactions within magnetic layers stabilize the formation of noncollinear spin textures, which can be leveraged to design devices with tailored magnetization dynamics. Here, we introduce chiral spin frustration in which energetically degenerate magnetic states frustrate the Dzyaloshinskii-Moriya interaction. We demonstrate magnon-driven switching of the chirally frustrated spin states in Bi-substituted yttrium iron garnet thin films. These states are defined by an in-plane macrospin neighboring two out-ofplane spins on either side with opposing chirality. Using scanning nitrogen-vacancy magnetometry and spin pumping, we identified four degenerate frustrated states and achieved their controllable switching via magnon spin torque. Crucially, the switching is unidirectional, with selectivity determined by the incoming magnon direction. This mechanism provides a powerful approach to manipulate frustrated spin states with magnons. Chiral spin frustration unlocks the geometry constraints of conventional frustration, and therefore opens new horizons for frustrated magnetism, paving the way for energy-efficient spintronic devices based on frustratio

cond-mat.mes-hall↗

arXiv2025

On-Chip Frequency Noise Cancellation in Nanomechanical Resonators using Cavity Optomechanics

Understanding and minimizing the sources of frequency noise in nanomechanical resonators is crucial for many sensing applications. In this work, we report an ultracoherent perimeter-mode nanomechanical resonator co-integrated with an on-chip optical cavity. This device combines low thermomechanical force noise and low detector noise, allowing us to study its intrinsic frequency fluctuations in detail. We find that the fluctuations of two mechanical modes are strongly correlated. Moreover, we demonstrate the generation of a signal at the frequency difference between the two modes directly on chip via nonlinear optomechanical transduction. This `difference signal' has vastly reduced intrinsic frequency fluctuations and can be used for frequency tracking with high precision, as we establish in a proof-of-principle experiment.

physics.optics↗

arXiv2025

Nanoscale electrostatic control in ferroelectric thin films through lattice chemistry

Nanoscale electrostatic control of oxide interfaces enables physical phenomena and exotic functionalities beyond the realm of the bulk material. In technologically-relevant ferroelectric thin films, the interface-mediated polarization control is usually exerted by engineering the depolarizing field. Here, in contrast, we introduce polarizing surfaces and lattice chemistry engineering as an alternative strategy. Specifically, we engineer the electric-dipole ordering in ferroelectric oxide heterostructures by exploiting the charged sheets of the layered Aurivillius model system. By tracking in-situ the formation of the Aurivillius charged Bi$_{2}$O$_{2}$ sheets, we reveal their polarizing effect leading to the characteristic Aurivillius out-of-plane antipolar ordering. Next, we use the polarizing Bi$_{2}$O$_{2}$ stacking as a versatile electrostatic environment to create new electric dipole configurations. We insert multiferroic BiFeO$_3$ into the Aurivillius framework to stabilize a ferrielectric-like non-collinear electric-dipole order in the final heterostructure while maintaining the antiferromagnetic order of BiFeO$_3$. We thus demonstrate that engineering the lattice chemistry stabilizes unconventional ferroic orderings at the nanoscale, a strategy that may be expanded beyond the realm of electrically ordered materials.

cond-mat.mtrl-sci↗

arXiv2025

Minimizing sensor-sample distances in scanning nitrogen-vacancy magnetometry

Scanning magnetometry with nitrogen-vacancy (NV) centers in diamond has led to significant advances in the sensitive imaging of magnetic systems. The spatial resolution of the technique, however, remains limited to tens to hundreds of nanometers, even for probes where NV centers are engineered within 10 nm from the tip apex. Here, we present a correlated investigation of the crucial parameters that determine the spatial resolution: the mechanical and magnetic stand-off distances, as well as the sub-surface NV center depth in diamond. We study their contributions using mechanical approach curves, photoluminescence measurements, magnetometry scans, and nuclear magnetic resonance (NMR) spectroscopy of surface adsorbates. We first show that the stand-off distance is mainly limited by features on the surface of the diamond tip, hindering mechanical access. Next, we demonstrate that frequency-modulated atomic force microscopy (FM-AFM) feedback partially overcomes this issue, leading to closer and more consistent magnetic stand-off distances (26-87 nm) compared to the more common amplitude-modulated (AM-AFM) feedback (43-128 nm). FM operation thus permits improved magnetic imaging of sub-100-nm spin textures, shown for the spin cycloid in BFO and domain walls in a CoFeB synthetic antiferromagnet. Finally, by examining 1H and 19F NMR signals in soft contact with a polytetrafluoroethylene surface, we demonstrate a minimum NV-to-sample distance of 7.9+/-0.4 nm.

cond-mat.mes-hall↗

arXiv2025

SimOS: A Python Framework for Simulations of Optically Addressable Spins

We present an open-source simulation framework for optically detected magnetic resonance, developed in Python. The framework allows users to construct, manipulate, and evolve multipartite quantum systems that consist of spins and electronic levels. We provide an interface for efficient time-evolution in Lindblad form as well as a framework for facilitating simulation of spatial and generalized stochastic dynamics. Further, symbolic operator construction and propagation is supported for simple model systems making the framework also ideal for use in classroom instruction of magnetic resonance. Designed to be backend-agnostic, the library leverages existing Python libraries as computational backends. We introduce the most important functionality and illustrate the syntax on a series of examples. These include systems such as the nitrogen-vacancy center in diamond and photo-generated spin-correlated radical pairs for which our library offers system-specific sub-modules.

quant-ph↗

arXiv2024

Differential Magnetic Force Microscopy with a Switchable Tip

The separation of physical forces acting on the tip of a magnetic force microscope (MFM) is essential for correct magnetic imaging. Electrostatic forces can be modulated by varying the tip-sample potential and minimized to map the local Kelvin potential. However, distinguishing magnetic forces from van der Waals forces typically requires two measurements with opposite tip magnetizations under otherwise identical measurement conditions. Here, we present an inverted magnetic force microscope where the sample is mounted on a flat cantilever for force sensing, and the magnetic tip is attached to a miniaturized electromagnet that periodically flips the tip magnetization. This setup enables the extraction of magnetic tip-sample interactions from the sidebands occurring at the switching rate in the cantilever oscillation spectrum. Our method achieves the separation of magnetic signals from other force contributions in a single-scan mode. Future iterations of this setup may incorporate membrane, trampoline, or string resonators with ultra-high quality factors, potentially improving measurement sensitivity by up to three orders of magnitude compared to the state-of-the-art MFM systems using cantilevers.

physics.app-ph↗

arXiv2024

Estimation of spin-orbit torques in the presence of current-induced magnon creation and annihilation

We present a comprehensive set of harmonic resistance measurements of the dampinglike (DL) and fieldlike (FL) torques in Pt/CoFeB, Pt/Co, W/CoFeB, W/Co, and YIG/Pt bilayers complemented by measurements of the DL torque using the magneto-optical Kerr effect and calibrated by nitrogen vacancy magnetometry on the same devices. The magnon creation-annihilation magnetoresistances depend strongly on temperature and on the magnetic and transport properties of each bilayer, affecting the estimate of both the DL and FL torque. The DL torque, the most important parameter for applications, is overestimated by a factor of 2 in W/CoFeB and by one order of magnitude in YIG/Pt when not accounting for the magnonic contribution to the planar Hall resistance. We further show that the magnonic contribution can be quantified by combining measurements of the nonlinear longitudinal and transverse magnetoresistances, thus providing a reliable method to measure the spin-orbit torques in different material systems.

cond-mat.mes-hall↗

arXiv2024

Quantum magnetometry of transient signals with a time resolution of 1.1 nanoseconds

Quantum magnetometers based on spin defects in solids enable sensitive imaging of various magnetic phenomena, such as ferro- and antiferromagnetism, superconductivity, and current-induced fields. Existing protocols primarily focus on static fields or narrow-band dynamical signals, and are optimized for high sensitivity rather than fast time resolution. Here, we report detection of fast signal transients, providing a perspective for investigating the rich dynamics of magnetic systems. We experimentally demonstrate our technique using a single nitrogen-vacancy (NV) center magnetometer at room temperature, reaching a best-effort time resolution of 1.1 ns, an instantaneous bandwidth of 0.9 GHz, and a time-of-flight precision better than 20 ps. The time resolution can be extended to the picosecond range by use of on-chip waveguides. At these speeds, NV quantum magnetometers will become competitive with time-resolved synchrotron X-ray techniques. Looking forward, adding fast temporal resolution to the spatial imaging capability further promotes single-spin probes as powerful research tools in spintronics, mesoscopic physics, and nanoscale device metrology.

quant-ph↗

arXiv2024

Observation of chiral domain walls in an octupole-ordered antiferromagnet

Spin chirality in antiferromagnets offers new opportunities for spintronics. The kagome antiferromagnet Mn3Sn is a paradigmatic material in which the antiferromagnetic order parameter can be detected and controlled by electrical means. However, direct investigation of the magnetic texture of Mn3Sn has been challenging because of the tiny moment hosted in its magnetic octupole, hindering further clarification of this unique material. Here, we address this issue by observing the stray magnetic field from Mn3Sn using a diamond quantum scanning magnetometer. The spatially-resolved intrinsic domains and domain walls in a high-quality single-crystalline Mn3Sn film quantitatively reveal the polarization angle of the magnetic octupole in the kagome plane, the domain's local magnetization, the domain wall's width and chirality, and the octupole order in domain walls. Our nanoscale investigation of Mn3Sn, a powerful complement to macroscopic measurements, paves the road for developing chiral antiferromagnetism and its potential for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

Vibrational Squeezing via Spin Inversion Pulses

Magnetic Resonance Force Microscopy (MRFM) describes a range of approaches to detect nuclear spins with mechanical sensors. MRFM has the potential to enable magnetic resonance imaging (MRI) with near-atomic spatial resolution, opening up exciting possibilities in solid state and biological research. In many cases, the spin-mechanics coupling in MRFM is engineered with the help of periodic radio-frequency pulses. In this paper, we report that such pulses can result in unwanted parametric amplification of the mechanical vibrations, causing misinterpretation of the measured signal. We show how the parametric effect can be cancelled by auxiliary radio-frequency pulses or by appropriate post-correction after careful calibration. Future MRFM measurements may even make use of the parametric amplification to reduce the impact of amplifier noise

physics.app-ph↗