arXiv subjects

Christian Herglotz

Publications and source records attributed to Christian Herglotz.

At least 19 recordsLinked to original sources

arXiv2026

Sensor-Adaptive Infrared Spectral Reconstruction with Plug-and-Play Diffusion Priors

Hyperspectral sensing enables material identification; however, state-of-the-art spectrometers are costly and bulky, which limits their use in mobile applications. We address this by proposing sparse spectrum reconstruction from narrowband photocurrents using a pseudoinverse-guided diffusion model ({\Pi}GDM). With {\Pi}GDM we use a denoising diffusion probabilistic model (DDPM) to reconstruct the spectrum, which is trained on a large public spectral dataset to learn realistic spectral priors, eliminating the need for paired sensor measurements. At inference, {\Pi}GDM alternates reverse-diffusion denoising steps with pseudoinverse projection to enforce consistency with measured photocurrents via the calibrated responsivity matrices of sensors. Consequently, our method is sensor-adaptive: when detector arrays change, we simply substitute the responsivity matrix in the pseudoinverse projection without retraining of the diffusion model. The resulting computational spectrometer achieves 1.502% average estimation error, outperforming Tikhonov, Gaussian, compressive-sensing, and multilayer perceptron (MLP) baselines, while providing calibrated uncertainty estimates via Monte Carlo sampling from different random initializations of {\Pi}GDM. Summarizing, our approach offers an accurate, compact alternative for spectral recovery on resource-constrained platforms.

eess.SP↗

arXiv2026

Fusion: A Framework for Unified Sequential Token AdaptatIon in VisiOn TraNsformers

Vision Transformers achieve strong image classification accuracy but process all image regions with nearly the same computation, even when many regions are redundant or uninformative. Recent adaptive inference methods reduce this cost by selectively compressing tokens or terminating inference early, but combining these mechanisms often causes unstable intermediate representations and accuracy degradation. We introduce Fusion, a unified adaptive inference framework that coordinates token merging, early exiting, and token pruning through a simple staged design: tokens are merged first, confidence is evaluated next, and pruning is applied only to samples that continue inference. This ordering allows the three mechanisms to operate cooperatively rather than competitively. Fusion further includes lightweight routing modules that adapt compression strength to each input and support inference-time adjustment of the accuracy--latency trade-off without retraining. On ImageNet-1k with DeiT-S, Fusion matches or surpasses state-of-the-art adaptive ViT methods at comparable compute budgets while reducing calibration error by up to $4\times$ and inference energy by $48\%$. Experiments across ImageNet-100, CIFAR-100, and ImageNette with multiple ViT backbones demonstrate consistent transferability without dataset-specific tuning.

cs.CV↗

arXiv2026

SENTRY: Statistical Reliability Analysis of Vision Transformers Under Soft Errors

With the growth of Vision Transformers in safety-critical domains like autonomous systems and medical imaging, ensuring their reliability against soft errors is paramount. While ViTs offer state-of-the-art accuracy, their massive parameter counts render exhaustive fault injection campaigns infeasible. To bridge this gap, a statistical fault injection framework is presented, leveraging finite-population sampling theory to provide formal reliability guarantees. It is demonstrated that failure rates are bounded within a 1% margin at 99\% confidence using only a few thousand samples, regardless of model scale. This methodology achieves up to a 10,700 times reduction in experimental cost compared to exhaustive approaches, while preserving the ability to localize vulnerabilities across architectural components. Through extensive evaluation of different architectures like ViT-Tiny and ViT-Small, a highly non-uniform reliability landscape is uncovered. It is shown that while only 3% of FP32 bit-flips result in failure, the vast majority of these events lead to catastrophic accuracy collapse. Specific vulnerabilities are localized to normalization layers and critical exponent bits within the IEEE-754 format, providing a mathematical foundation and actionable insights for the design of hardened, edge-deployed ViT architectures.

cs.CV↗

arXiv2026

HASA: Subnet Allocation for Compute-Constrained Model-Heterogeneous Federated Learning

Edge services increasingly use federated learning to personalize on-device models while keeping sensitive data local. In practice, deployments must handle heterogeneity in both client resources and local data distributions. Model-heterogeneous federated learning lowers client cost by allowing each client to train a subnet of a shared supernet, but most subnet-allocation policies are driven by device constraints and do not explicitly account for statistical heterogeneity. This paper proposes Heterogeneity-Aware Subnet Allocation (HASA), a train-only rule that assigns subnet widths based on client heterogeneity scores computed from local training data while enforcing a fixed size-weighted compute budget. This design enables budget-matched comparisons with alternative allocation policies. On an article-title next-word prediction benchmark with seven clients, HASA improves unweighted mean client test accuracy over uniform allocation across 10 matched seeds, increasing mean client test accuracy from 13.82 percent to 14.32 percent, and improves worst-client accuracy on average. In a matched-budget comparison with representative partial-training baselines, HASA achieves the strongest worst-client and tail-client accuracy on this benchmark. A directionality ablation shows that assigning smaller subnets to more heterogeneous clients degrades both mean and tail performance. A cross-domain image-classification study further shows that the effectiveness of heterogeneity-aware allocation depends on how well the heterogeneity score reflects clients' need for additional model width.

cs.LG↗

arXiv2026

Energy-Aware Frame Rate Selection for Video Coding

The main contributions of this paper are twofold: First, we present an in-depth analysis of the impact of frame rate reductions on the visual quality of the video and the encoding as well as decoding energy. Second, we propose a lightweight frame rate selection method for energy- and quality-aware encoding. Concerning the first contribution, this paper performs extensive encoding and decoding measurements, followed by an investigation of the impact of temporal downsampling on the energy demand of encoding and decoding at different frame rates. Furthermore, we determine the objective visual quality of the downsampled videos. As a result of this investigation, we identify content- and quantization-setting-dependent energy-aware frame rates, i.e., the temporal downsampling factors that lead to Pareto-optimality in terms of energy and quality. We demonstrate that significant energy savings are achieved while maintaining constant visual quality. Subsequently, a subjective experiment is conducted to verify this observation regarding perceptual quality using mean opinion scores. As the second contribution, we propose an energy-aware frame rate selection method that extracts spatio-temporal features from the video sequences. Based on these features, the proposed method employs a feature-based supervised machine learning approach to predict energy-aware frame rates for a given quantization parameter and video sequence, aiming to reduce energy consumption during encoding and decoding. The experimental results demonstrate that the proposed method offers significant energy savings, with an average of 17.46% and 17.60% of encoding and decoding energy demand reduction, respectively, alongside 3.38% average bitrate savings at a constant quality.

eess.IV↗

arXiv2026

Mix-and-Match Pruning: Globally Guided Layer-Wise Sparsification of DNNs

Deploying deep neural networks (DNNs) on edge devices requires strong compression with minimal accuracy loss. This paper introduces Mix-and-Match Pruning, a globally guided, layer-wise sparsification framework that leverages sensitivity scores and simple architectural rules to generate diverse, high-quality pruning configurations. The framework addresses a key limitation that different layers and architectures respond differently to pruning, making single-strategy approaches suboptimal. Mix-and-Match derives architecture-aware sparsity ranges, e.g., preserving normalization layers while pruning classifiers more aggressively, and systematically samples these ranges to produce ten strategies per sensitivity signal (magnitude, gradient, or their combination). This eliminates repeated pruning runs while offering deployment-ready accuracy-sparsity trade-offs. Experiments on CNNs and Vision Transformers demonstrate Pareto-optimal results, with Mix-and-Match reducing accuracy degradation on Swin-Tiny by 40% relative to standard single-criterion pruning. These findings show that coordinating existing pruning signals enables more reliable and efficient compressed models than introducing new criteria.

cs.CV↗

arXiv2026

RESQ: A Unified Framework for REliability- and Security Enhancement of Quantized Deep Neural Networks

This work proposes a unified three-stage framework that produces a quantized DNN with balanced fault and attack robustness. The first stage improves attack resilience via fine-tuning that desensitizes feature representations to small input perturbations. The second stage reinforces fault resilience through fault-aware fine-tuning under simulated bit-flip faults. Finally, a lightweight post-training adjustment integrates quantization to enhance efficiency and further mitigate fault sensitivity without degrading attack resilience. Experiments on ResNet18, VGG16, EfficientNet, and Swin-Tiny in CIFAR-10, CIFAR-100, and GTSRB show consistent gains of up to 10.35% in attack resilience and 12.47% in fault resilience, while maintaining competitive accuracy in quantized networks. The results also highlight an asymmetric interaction in which improvements in fault resilience generally increase resilience to adversarial attacks, whereas enhanced adversarial resilience does not necessarily lead to higher fault resilience.

cs.LG↗

arXiv2026

SPARQ: Spiking Early-Exit Neural Networks for Energy-Efficient Edge AI

Spiking neural networks (SNNs) offer inherent energy efficiency due to their event-driven computation model, making them promising for edge AI deployment. However, their practical adoption is limited by the computational overhead of deep architectures and the absence of input-adaptive control. This work presents SPARQ, a unified framework that integrates spiking computation, quantization-aware training, and reinforcement learning-guided early exits for efficient and adaptive inference. Evaluations across MLP, LeNet, and AlexNet architectures demonstrated that the proposed Quantised Dynamic SNNs (QDSNN) consistently outperform conventional SNNs and QSNNs, achieving up to 5.15% higher accuracy over QSNNs, over 330 times lower system energy compared to baseline SNNs, and over 90 percent fewer synaptic operations across different datasets. These results validate SPARQ as a hardware-friendly, energy-efficient solution for real-time AI at the edge.

cs.LG↗

arXiv2026

Sensitivity-Guided Framework for Pruned and Quantized Reservoir Computing Accelerators

This paper presents a compression framework for Reservoir Computing that enables systematic design-space exploration of trade-offs among quantization levels, pruning rates, model accuracy, and hardware efficiency. The proposed approach leverages a sensitivity-based pruning mechanism to identify and remove less critical quantized weights with minimal impact on model accuracy, thereby reducing computational overhead while preserving accuracy. We perform an extensive trade-off analysis to validate the effectiveness of the proposed framework and the impact of pruning and quantization on model performance and hardware parameters. For this evaluation, we employ three time-series datasets, including both classification and regression tasks. Experimental results across selected benchmarks demonstrate that our proposed approach maintains high accuracy while substantially improving computational and resource efficiency in FPGA-based implementations, with variations observed across different configurations and time series applications. For instance, for the MELBOEN dataset, an accelerator quantized to 4-bit at a 15\% pruning rate reduces resource utilization by 1.2\% and the Power Delay Product (PDP) by 50.8\% compared to an unpruned model, without any noticeable degradation in accuracy.

cs.AR↗

arXiv2026

HAWX: A Hardware-Aware FrameWork for Fast and Scalable ApproXimation of DNNs

This work presents HAWX, a hardware-aware scalable exploration framework that employs multi-level sensitivity scoring at different DNN abstraction levels (operator, filter, layer, and model) to guide selective integration of heterogeneous AxC blocks. Supported by predictive models for accuracy, power, and area, HAWX accelerates the evaluation of candidate configurations, achieving over 23* speedup in a layer-level search with two candidate approximate blocks and more than (3*106)* speedup at the filter-level search only for LeNet-5, while maintaining accuracy comparable to exhaustive search. Experiments across state-of-the-art DNN benchmarks such as VGG-11, ResNet-18, and EfficientNetLite demonstrate that the efficiency benefits of HAWX scale exponentially with network size. The HAWX hardware-aware search algorithm supports both spatial and temporal accelerator architectures, leveraging either off-the-shelf approximate components or customized designs.

cs.LG↗

arXiv2026

DART: Input-Difficulty-AwaRe Adaptive Threshold for Early-Exit DNNs

Early-exit deep neural networks enable adaptive inference by terminating computation when sufficient confidence is achieved, reducing cost for edge AI accelerators in resource-constrained settings. Existing methods, however, rely on suboptimal exit policies, ignore input difficulty, and optimize thresholds independently. This paper introduces DART (Input-Difficulty-Aware Adaptive Threshold), a framework that overcomes these limitations. DART introduces three key innovations: (1) a lightweight difficulty estimation module that quantifies input complexity with minimal computational overhead, (2) a joint exit policy optimization algorithm based on dynamic programming, and (3) an adaptive coefficient management system. Experiments on diverse DNN benchmarks (AlexNet, ResNet-18, VGG-16) demonstrate that DART achieves up to \textbf{3.3$\times$} speedup, \textbf{5.1$\times$} lower energy, and up to \textbf{42\%} lower average power compared to static networks, while preserving competitive accuracy. Extending DART to Vision Transformers (LeViT) yields power (5.0$\times$) and execution-time (3.6$\times$) gains but also accuracy loss (up to 17 percent), underscoring the need for transformer-specific early-exit mechanisms. We further introduce the Difficulty-Aware Efficiency Score (DAES), a novel multi-objective metric, under which DART achieves up to a 14.8 improvement over baselines, highlighting superior accuracy, efficiency, and robustness trade-offs.

cs.AR↗

arXiv2026

Adaptive Resolution and Chroma Subsampling for Energy-Efficient Video Coding

Conventional video encoders typically employ a fixed chroma subsampling format, such as YUV420, which may not optimally reflect variations in chroma detail across different types of content. This can lead to suboptimal chroma quality and inefficiencies in bitrate allocation. We propose an Adaptive Resolution-Chroma Subsampling (ARCS) framework that jointly optimizes spatial resolution and chroma subsampling to balance perceptual quality and decoding efficiency. ARCS selects an optimal (resolution, chroma format) pair for each bitrate by maximizing a composite quality-complexity objective, while enforcing monotonicity constraints to ensure smooth transitions between representations. Experimental results using x265 show that, compared to a fixed-format encoding (YUV444), on average, ARCS achieves a 13.48 % bitrate savings and a 62.18 % reduction in decoding time, which we use as a proxy for the decoding energy, to yield the same colorVideoVDP score. The proposed framework introduces chroma adaptivity as a new control dimension for energy-efficient video streaming.

eess.IV↗

arXiv2026

Content-Driven Frame-Level Bit Prediction for Rate Control in Versatile Video Coding

Rate control allocates bits efficiently across frames to meet a target bitrate while maintaining quality. Conventional two-pass rate control (2pRC) in Versatile Video Coding (VVC) relies on analytical rate-QP models, which often fail to capture nonlinear spatial-temporal variations, causing quality instability and high complexity due to multiple trial encodes. This paper proposes a content-adaptive framework that predicts frame-level bit consumption using lightweight features from the Video Complexity Analyzer (VCA) and quantization parameters within a Random Forest regression. On ultra-high-definition sequences encoded with VVenC, the model achieves strong correlation with ground truth, yielding R2 values of 0.93, 0.88, and 0.77 for I-, P-, and B-frames, respectively. Integrated into a rate-control loop, it achieves comparable coding efficiency to 2pRC while reducing total encoding time by 33.3%. The results show that VCA-driven bit prediction provides a computationally efficient and accurate alternative to conventional rate-QP models.

eess.IV↗

arXiv2026

Fast Multirate Encoding for 360{\deg} Video in OMAF Streaming Workflows

Preparing high-quality 360-degree video for HTTP Adaptive Streaming requires encoding each sequence into multiple representations spanning different resolutions and quantization parameters (QPs). For ultra-high-resolution immersive content such as 8K 360-degree video, this process is computationally intensive due to the large number of representations and the high complexity of modern codecs. This paper investigates fast multirate encoding strategies that reduce encoding time by reusing encoder analysis information across QPs and resolutions. We evaluate two cross-resolution information-reuse pipelines that differ in how reference encodes propagate across resolutions: (i) a strict HD -> 4K -> 8K cascade with scaled analysis reuse, and (ii) a resolution-anchored scheme that initializes each resolution with its own highest-bitrate reference before guiding dependent encodes. In addition to evaluating these pipelines on standard equirectangular projection content, we also apply the same two pipelines to cubemap-projection (CMP) tiling, where each 360-degree frame is partitioned into independently encoded tiles. CMP introduces substantial parallelism, while still benefiting from the proposed multirate analysis-reuse strategies. Experimental results using the SJTU 8K 360-degree dataset show that hierarchical analysis reuse significantly accelerates HEVC encoding with minimal rate-distortion impact across both equirectangular and CMP-tiled content, yielding encoding-time reductions of roughly 33%-59% for ERP and about 51% on average for CMP, with Bjontegaard Delta Encoding Time (BDET) gains approaching -50% and wall-clock speedups of up to 4.2x.

eess.IV↗

arXiv2025

A High-Level Feature Model to Predict the Encoding Energy of a Hardware Video Encoder

In today's society, live video streaming and user generated content streamed from battery powered devices are ubiquitous. Live streaming requires real-time video encoding, and hardware video encoders are well suited for such an encoding task. In this paper, we introduce a high-level feature model using Gaussian process regression that can predict the encoding energy of a hardware video encoder. In an evaluation setup restricted to only P-frames and a single keyframe, the model can predict the encoding energy with a mean absolute percentage error of approximately 9%. Further, we demonstrate with an ablation study that spatial resolution is a key high-level feature for encoding energy prediction of a hardware encoder. A practical application of our model is that it can be used to perform a prior estimation of the energy required to encode a video at various spatial resolutions, with different coding standards and codec presets.

eess.IV↗

arXiv2024

Modeling the Energy Consumption of the HEVC Software Encoding Process using Processor events

Developing energy-efficient video encoding algorithms is highly important due to the high processing complexities and, consequently, the high energy demand of the encoding process. To accomplish this, the energy consumption of the video encoders must be studied, which is only possible with a complex and dedicated energy measurement setup. This emphasizes the need for simple energy estimation models, which estimate the energy required for the encoding. Our paper investigates the possibility of estimating the energy demand of a HEVC software CPU-encoding process using processor events. First, we perform energy measurements and obtain processor events using dedicated profiling software. Then, by using the measured energy demand of the encoding process and profiling data, we build an encoding energy estimation model that uses the processor events of the ultrafast encoding preset to obtain the energy estimate for complex encoding presets with a mean absolute percentage error of 5.36% when averaged over all the presets. Additionally, we present an energy model that offers the possibility of obtaining energy distribution among various encoding sub-processes.

eess.IV↗

arXiv2024

Design Space Exploration at Frame-Level for Joint Decoding Energy and Quality Optimization in VVC

In the pursuit of a reduced energy demand of VVC decoders, it was found that the coding tool configuration has a substantial influence on the bit rate efficiency and the decoding energy demand. The Advanced Design Space Exploration algorithm as proposed in the literature, can derive coding tool configurations that provide optimal trade-offs between rate and energy efficiency. Yet, some trade-off points in the design space cannot be reached with the state-of-the-art methodology, which defines coding tools for an entire bitstream. This work proposes a novel, granular adjustment of the coding tool usage in VVC. Consequently, the optimization algorithm is adjusted to explore coding tool configurations that operate on frame-level. Moreover, new optimization criteria are introduced to focus the search on specific bit rates. As a result, coding tool configurations are obtained which yield so far inaccessible trade-offs between bit rate efficiency and decoding energy demand for VVC-coded sequences. The proposed methodology extends the design space and enhances the continuity of the Pareto front.

eess.IV↗

arXiv2024

Exploiting Change Blindness for Video Coding: Perspectives from a Less Promising User Study

What the human visual system can perceive is strongly limited by the capacity of our working memory and attention. Such limitations result in the human observer's inability to perceive large-scale changes in a stimulus, a phenomenon known as change blindness. In this paper, we started with the premise that this phenomenon can be exploited in video coding, especially HDR-video compression where the bitrate is high. We designed an HDR-video encoding approach that relies on spatially and temporally varying quantization parameters within the framework of HEVC video encoding. In the absence of a reliable change blindness prediction model, to extract compression candidate regions (CCR) we used an existing saliency prediction algorithm. We explored different configurations and carried out a subjective study to test our hypothesis. While our methodology did not lead to significantly superior performance in terms of the ratio between perceived quality and bitrate, we were able to determine potential flaws in our methodology, such as the employed saliency model for CCR prediction (chosen for computational efficiency, but eventually not sufficiently accurate), as well as a very strong subjective bias due to observers priming themselves early on in the experiment about the type of artifacts they should look for, thus creating a scenario with little ecological validity.

eess.IV↗