arXiv Science⌕ Search

arXiv subjects

Christian Franck

Publications and source records attributed to Christian Franck.

14 recordsLinked to original sources
arXiv2026

Head Kinematics and Brain Tissue Deformation from Soccer Heading: A Review of Implications for Brain Injury Risk

Purpose: Repeated heading of soccer balls has raised concerns of potential long-term neurological effects. Consequently, numerous studies have estimated head kinematics and brain deformation due to soccer headers across different cohorts and play scenarios to identify higher risk conditions. However, heterogeneity in study design, data collection, and analysis has produced inconsistent findings, and injury risk is infrequently reported. Therefore, a meta-analysis of the existing literature was conducted to identify knowledge gaps and inform future studies assessing injury risk in soccer. Methods: We synthesized data from studies reporting head kinematics or brain deformation from soccer headers on human subjects. The data from these studies were analyzed to obtain the risk of mild traumatic brain injury (mTBI) based on applicable injury metrics and risk curves. Results: The meta-analysis revealed specific trends, indicating that match scenarios, corner and goal-kicks, top and oblique impacts, and older age cohorts were associated with higher head kinematics, while sex-based trends were inconclusive. The choice of sensor system affected the estimated head kinematics, with headband sensors consistently measuring higher kinematics than mouthpiece sensors. The data showed large variability stemming from heterogeneous study designs, limiting the applicability of the observed trends. These factors also influenced injury risk predictions, with estimated concussion risks generally below 20%. Conclusion: This review reveals trends in mTBI risk from soccer heading across different cohorts and play scenarios. It also underscores the need for standardized reporting of kinematics and brain deformation to enable mTBI risk estimation and meaningful cross-study comparisons.

q-bio.OT↗
arXiv2025

A Virtual Fields Method-Genetic Algorithm (VFM-GA) calibration framework for isotropic hyperelastic constitutive models with application to an elastomeric foam material

This work introduces a calibration framework for material parameter identification in isotropic hyperelastic constitutive models. The framework synergizes the Virtual Fields Method (VFM) to define an objective function with a Genetic Algorithm (GA) as the optimization method to facilitate automated calibration. The formulation of the objective function uses experimental displacement fields measured from Digital Image Correlation (DIC) synchronized with load cell data and can accommodate data from experiments involving homogeneous or inhomogeneous deformation fields. The framework places no restrictions on the target isotropic hyperelastic constitutive model, accommodating models with coupled dependencies on deformation invariants and specialized functional forms with a number of material parameters, and assesses material stability, eliminating sets of material parameters that potentially lead to non-physical behavior for the target hyperelastic constitutive model. To minimize the objective function, a GA is deployed as the optimization tool due to its ability to navigate the intricate landscape of material parameter space. The VFM-GA framework is evaluated by applying it to a hyperelastic constitutive model for compressible elastomeric foams. The evaluation process entails a number of tests that employ both homogeneous and inhomogeneous displacement fields collected from DIC experiments on open-cell foam specimens. The results outperform manual fitting, demonstrating the framework's robust and efficient capability to handle material parameter identification for complex hyperelastic constitutive models.

physics.comp-ph↗
arXiv2025

Effect of modeling subject-specific cortical folds on brain injury risk prediction under blunt impact loading

Purpose: Computational head models are essential tools for studying the risk of mild traumatic brain injury (mTBI) under different activities and across populations. However, different computational models incorporate varied levels of anatomical details, such as cortical folds. In this study, we aim to determine the effect of modeling cortical folds on mTBI risk assessment. Methods: We compared the gyrencephalic (with cortical folds) and lissencephalic (without cortical folds) FE models of 18 subjects aged 9 - 18 years, under a rotational head acceleration event. A rotational acceleration of 10 krad/s$^2$ and 10 ms duration was simulated about each principal head axis. We analyzed different mTBI injury metrics, including maximum principal strain (MPS95), maximum principal strain rate (MPSR95), and cumulative strain damage measure (CSDM15), for the whole brain as well as for specific regions of interest (ROIs). Results: Modeling cortical folds consistently predicted higher injury metrics across all individuals and rotational direction, with the bias (mean $\pm$ std. dev.) of $-21.17\pm 9.1\%$ in MPS95, $-17.1 \pm 7.6\%$ in MPSR95, and $-14.4 \pm 11.3\%$ in CSDM15. Modeling cortical folds significantly affected the spatial strain distributions, with the DICE similarity coefficient on peak MPS ranging between $0.07-0.43$ and DICE on CSDM15 ranging between $0.42-0.70$; and increasing the peak injury metrics even in the geometrically unaltered regions of interest, such as the corpus callosum, cerebellum, and brain stem, by up to $50\%$. Conclusions: The study finds that the inclusion of cortical folds significantly alters the pattern of deformation in the brain, thereby affecting the mTBI risk predictions head rotations.

q-bio.TO↗
arXiv2025

Field evaluation of a wearable instrumented headband designed for measuring head kinematics

Purpose: To study the relationship between soccer heading and the risk of mild traumatic brain injury (mTBI), we previously developed an instrumented headband and data processing scheme to measure the angular head kinematics of soccer headers. Laboratory evaluation of the headband on an anthropomorphic test device showed good agreement with a reference sensor for soccer ball impacts to the front of the head. In this study, we evaluate the headband in measuring the full head kinematics of soccer headers in the field. Methods: The headband was evaluated under typical soccer heading scenarios (throw-ins, goal-kicks, and corner-kicks) on a human subject. The measured time history and peak kinematics from the headband were compared with those from an instrumented mouthpiece, which is a widely accepted method for measuring head kinematics in the field. Results: The time history agreement (CORA scores) between the headband and the mouthpiece ranged from 'fair' to 'excellent', with the highest agreement for angular velocities (0.79 \pm 0.08) and translational accelerations (0.73 \pm 0.05) and lowest for angular accelerations (0.67 \pm 0.06). A Bland-Altman analysis of the peak kinematics from the headband and mouthpiece found the mean bias to be 40.9% (of the maximum mouthpiece reading) for the angular velocity, 16.6% for the translational acceleration, and-14.1% for the angular acceleration. Conclusion: The field evaluation of the instrumented headband showed reasonable agreement with the mouthpiece for some kinematic measures and impact conditions. Future work should focus on improving the headband performance across all kinematic measures.

eess.SP↗
arXiv2025

Laboratory evaluation of a wearable instrumented headband for rotational head kinematics measurement

Mild traumatic brain injuries (mTBI) are a highly prevalent condition with heterogeneous outcomes between individuals. A key factor governing brain tissue deformation and the risk of mTBI is the rotational kinematics of the head. Instrumented mouthguards are a widely accepted method for measuring rotational head motions, owing to their robust sensor-skull coupling. However, wearing mouthguards is not feasible in all situations, especially for long-term data collection. Therefore, alternative wearable devices are needed. In this study, we present an improved design and data processing scheme for an instrumented headband. Our instrumented headband utilizes an array of inertial measurement units (IMUs) and a new data-processing scheme based on continuous wavelet transforms to address sources of error in the IMU measurements. The headband performance was evaluated in the laboratory on an anthropomorphic test device, which was impacted with a soccer ball to replicate soccer heading. When comparing the measured peak rotational velocities (PRV) and peak rotational accelerations (PRA) between the reference sensors and the headband for impacts to the front of the head, the correlation coefficients (r) were 0.80 and 0.63, and the normalized root mean square error (NRMSE) values were 0.20 and 0.28, respectively. However, when considering all impact locations, r dropped to 0.42 and 0.34 and NRMSE increased to 0.5 and 0.41 for PRV and PRA, respectively. This new instrumented headband improves upon previous headband designs in reconstructing the rotational head kinematics resulting from frontal soccer ball impacts, providing a potential alternative to instrumented mouthguards.

eess.SP↗
arXiv2023

Estimating viscoelastic, soft material properties using a modified Rayleigh cavitation bubble collapse time

Accurate determination of high strain rate (> 10^3 1/s) constitutive properties of soft materials remains a formidable challenge. Albeit recent advancements among experimental techniques, in particular inertial microcavitation rheometry (IMR), the intrinsic requirement to visualize the bubble cavitation dynamics has limited its application to nominally transparent materials. Here, in an effort to address this challenge and to expand the experimental capability of IMR to optically opaque materials, we investigated whether one could use the acoustic signature of the time interval between bubble nucleation and collapse, characterized as the bubble collapse time, to infer the viscoelastic material properties without being able to image the bubble directly in the tissue. By introducing a modified Rayleigh collapse time for soft materials, which is strongly dependent on the stiffness of the material at hand, we show that, in principle, one can obtain an order of magnitude or better estimate of the viscoelastic material properties of the soft material under investigation. Using a newly developed energy-based theoretical framework, we show that for materials stiffer than 10 kPa the bubble collapse time during a single bubble cavitation event can provide quantitative and meaningful information about the constitutive properties of the material at hand. For very soft materials (i.e., shear modulus less than 10 kPa) our theory shows that unless the collapse time measurement has very high precision and low uncertainties, the material property estimates based on the bubble collapse time only will not be accurate and require visual resolution of the full cavitation kinematics.

cond-mat.soft↗
arXiv2022

SerialTrack: ScalE and Rotation Invariant Augmented Lagrangian Particle Tracking

We present a new particle tracking algorithm to accurately resolve large deformation and rotational motion fields, which takes advantage of both local and global particle tracking algorithms. We call this method the ScalE and Rotation Invariant Augmented Lagrangian Particle Tracking (SerialTrack). This method builds an iterative scale and rotation invariant topology-based feature for each particle within a multi-scale tracking algorithm. The global kinematic compatibility condition is applied as a global augmented Lagrangian constraint to enhance the tracking accuracy. An open source software package implementing this numerical approach to track both 2D and 3D, incremental and cumulative deformation fields is provided.

cs.RO↗
arXiv2021

Predicting Complex Non-spherical Instability Shapes of Inertial Cavitation Bubbles in Viscoelastic Soft Matter

Inertial cavitation in soft matter is an important phenomenon featured in a wide array of biological and engineering processes. Recent advances in experimental, theoretical, and numerical techniques have provided access into a world full of nonlinear physics, yet most of our quantitative understanding to date has been centered on a spherically symmetric description of the cavitation process. However, cavitation bubble growth and collapse rarely occur in a perfectly symmetrical fashion, particularly in soft materials. Predicting the onset of dynamically arising, non-spherical instabilities has remained a significant, unresolved challenge in part due to the additional constitutive complexities introduced by the surrounding nonlinear viscoelastic solid. Here, we provide a new theoretical model capable of accurately predicting the onset of non-spherical instability shapes of a bubble in a soft material by explicitly accounting for all pertinent nonlinear interactions between the fluid-like cavitation bubble and the solid-like surroundings. Comparison against high-resolution experimental images from laser-induced cavitation events in a polyacrylamide (PA) hydrogel show excellent agreement. Interestingly, and consistent with experimental findings, our model predicts the emergence of various dynamic instability shapes for hoop stretch ratios greater than one in contrast to most quasi-static investigations. Our new theoretical framework not only provides unprecedented insight into the cavitation dynamics in a soft solid, but it also provides a quantitative means of interpreting bubble dynamics relevant to a wide array of engineering and medical applications as well as natural phenomena.

cond-mat.soft↗
arXiv2020

Acoustic Cavitation Rheometry

Characterization of soft materials is challenging due to their high compliance and the strain-rate dependence of their mechanical properties. The inertial microcavitation-based high strain-rate rheometry (IMR) method [Estrada et al., J. Mech. Phys. Solids, 2018, 112, 291-317] combines laser-induced cavitation measurements with a model for the bubble dynamics to measure local properties of polyacrylamide hydrogel under high strain-rates from $10^3$ to $10^8$ s$^{-1}$. While promising, laser-induced cavitation involves plasma formation and optical breakdown during nucleation, a process that could alter local material properties before measurements are obtained. In the present study, we extend the IMR method to another means to generate cavitation, namely high-amplitude focused ultrasound, and apply the resulting acoustic-cavitation-based IMR to characterize the mechanical properties of agarose hydrogels. Material properties including viscosity, elastic constants, and a stress-free bubble radius are inferred from bubble radius histories in $0.3\%$ and $1\%$ agarose gels. An ensemble-based data assimilation is used to further help interpret the obtained estimates. The resulting parameter distributions are consistent with available measurements of agarose gel properties and with expected trends related to gel concentration and high strain-rate loading. Our findings demonstrate the utility of applying IMR and data assimilation methods with single-bubble acoustic cavitation data for measurement of viscoelastic properties.

cond-mat.soft↗
arXiv2020

Characterizing viscoelastic materials via ensemble-based data assimilation of bubble collapse observations

Viscoelastic material properties at high strain rates are needed to model many biological and medical systems. Bubble cavitation can induce such strain rates, and the resulting bubble dynamics are sensitive to the material properties. Thus, in principle, these properties can be inferred via measurements of the bubble dynamics. Estrada et al. (2018) demonstrated such bubble-dynamic high-strain-rate rheometry by using least-squares shooting to minimize the difference between simulated and experimental bubble radius histories. We generalize their technique to account for additional uncertainties in the model, initial conditions, and material properties needed to uniquely simulate the bubble dynamics. Ensemble-based data assimilation minimizes the computational expense associated with the bubble cavitation model. We test an ensemble Kalman filter (EnKF), an iterative ensemble Kalman smoother (IEnKS), and a hybrid ensemble-based 4D--Var method (En4D--Var) on synthetic data, assessing their estimations of the viscosity and shear modulus of a Kelvin--Voigt material. Results show that En4D--Var and IEnKS provide better moduli estimates than EnKF. Applying these methods to the experimental data of Estrada et al. (2018) yields similar material property estimates to those they obtained, but provides additional information about uncertainties. In particular, the En4D--Var yields lower viscosity estimates for some experiments, and the dynamic estimators reveal a potential mechanism that is unaccounted for in the model, whereby the viscosity is reduced in some cases due to material damage occurring at bubble collapse.

physics.comp-ph↗
arXiv2016

Untraceable VoIP Communication based on DC-nets

Untraceable communication is about hiding the identity of the sender or the recipient of a message. Currently most systems used in practice (e.g., TOR) rely on the principle that a message is routed via several relays to obfuscate its path through the network. However, as this increases the end-to-end latency it is not ideal for applications like Voice-over-IP (VoIP) communication, where participants will notice annoying delays if the data does not arrive fast enough. We propose an approach based on the paradigm of Dining Cryptographer networks (DC-nets) that can be used to realize untraceable communication within small groups. The main features of our approach are low latency and resilience to packet-loss and fault packets sent by malicious players. We consider the special case of VoIP communication and propose techniques for a P2P implementation. We expose existing problems and sketch possible future large-scale systems composed of multiple groups.

cs.CR↗
arXiv2014

Dining Cryptographers are Practical

The dining cryptographers protocol provides information-theoretically secure sender and recipient untraceability. However, the protocol is considered to be impractical because a malicious participant may disrupt the communication. We propose an implementation which provides information-theoretical security for senders and recipients, and in which a disruptor with limited computational capabilities can easily be detected.

cs.CR↗
arXiv2014

Dining Cryptographers with 0.924 Verifiable Collision Resolution

The dining cryptographers protocol implements a multiple access channel in which senders and recipients are anonymous. A problem is that a malicious participant can disrupt communication by deliberately creating collisions. We propose a computationally secure dining cryptographers protocol with collision resolution that achieves a maximum stable throughput of 0.924 messages per round and which allows to easily detect disruptors.

cs.CR↗