arXiv subjects

Chris Dick

Publications and source records attributed to Chris Dick.

At least 19 recordsLinked to original sources

arXiv2026

On the Impact of Site-Specific Training for a Real-World 5G NR System

Site-specific training can improve wireless receiver performance without increasing computational complexity. However, real-world results have so far focused on fully trainable neural receivers and single-layer transmissions. We study site-specific finetuning of three receiver architectures: fully trainable neural, model-driven neural, and model-based. We train and evaluate these receivers using new measurements from a standard-compliant 5G NR testbed at ETH Zurich with dual-layer uplink transmission, including measurement campaigns conducted more than six months apart. Our results show that site-specific finetuning (i) substantially improves fully trainable and model-driven neural receivers, while resulting in only marginal gains for the less tunable model-based receiver; (ii) enables a single neural receiver jointly finetuned for single- and dual-layer transmission to closely match receivers finetuned separately for each configuration; and (iii) remains effective across measurement campaigns separated by more than six months. We also investigate site-specific linear minimum mean-square error channel estimation using covariance matrices estimated from either synthetic channels or site-specific measurements. When combined with iterative detection and decoding, site-specific channel estimation achieves the lowest error rate observed in our datasets. Our finetuning code and measurement datasets are publicly available at https://github.com/IIP-Group/site_specific_training

cs.IT↗

arXiv2026

Site-Specific Finetuning of Neural Receivers with Real-World 5G NR Measurements

Finetuning wireless receivers to a specific deployment scenario can yield significant error-rate performance improvements without increasing processing complexity. However, site-specific finetuning has so far only been demonstrated on synthetic channel data and lacks real-world benchmarks. In this work, we empirically study site-specific finetuning of neural receivers using real-world 5G NR physical uplink shared channel (PUSCH) data collected with an over-the-air testbed at ETH Zurich across three scenarios: (i) a small laboratory, (ii) a large office floor, and (iii) a high-mobility outdoor environment. Our results confirm substantial error-rate performance improvements from site-specific finetuning, consistent with earlier findings based on synthetic channel data. Moreover, we demonstrate that these improvements generalize across different user-equipment hardware and deployment scenarios.

eess.SP↗

arXiv2026

TITAN: Twin-Informed Topology Adaptation for LAWN-enabled D2C Communication

Low-Altitude Wireless Networks (LAWN) are transforming the low-altitude airspace into a mission-driven, dynamically reconfigurable 3D network fabric for safety-critical and public-safety operations. In parallel, Direct-to-Cell (D2C) satellite access can rapidly restore connectivity after disasters, yet dense urban blockages make the satellite-to-ground link unreliable for many users. To overcome this, we leverage the LAWN aerial layer and form an adaptive low-altitude relay topology where Unmanned Aerial Vehicles (UAVs) act as D2C-assisted aerial relays for obstructed ground users. We introduce TITAN, a twin-informed topology adaptation framework that builds a high-fidelity Digital Twin (DT) of the affected urban area and performs site-specific, ray-traced air-to-ground channel modeling via Sionna RT. This informs a Bayesian optimization process that adapts the aerial topology to maximize coverage and Quality of Service (QoS) for ground users by using UAVs as optimal D2C relays. Extensive system-level simulations with Sionna show that TITAN consistently outperforms the baselines and delivers +32.2% user coverage, +64.9% system sum-rate, and +49.3% fairness over the state-of-the-art (SOTA) that employ heuristic placement or statistical channel approximations. To support further research in resilient network design, we open-source the codebase of the TITAN framework.

cs.NI↗

arXiv2025

CSI-Based User Positioning, Channel Charting, and Device Classification with an NVIDIA 5G Testbed

Channel-state information (CSI)-based sensing will play a key role in future cellular systems. However, no CSI dataset has been published from a real-world 5G NR system that facilitates the development and validation of suitable sensing algorithms. To close this gap, we publish three real-world wideband multi-antenna multi-open RAN radio unit (O-RU) CSI datasets from the 5G NR uplink channel: an indoor lab/office room dataset, an outdoor campus courtyard dataset, and a device classification dataset with six commercial-off-the-shelf (COTS) user equipments (UEs). These datasets have been recorded using a software-defined 5G NR testbed based on NVIDIA Aerial RAN CoLab Over-the-Air (ARC-OTA) with COTS hardware, which we have deployed at ETH Zurich. We demonstrate the utility of these datasets for three CSI-based sensing tasks: neural UE positioning, channel charting in real-world coordinates, and closed-set device classification. For all these tasks, our results show high accuracy: neural UE positioning achieves 0.6cm (indoor) and 5.7cm (outdoor) mean absolute error, channel charting in real-world coordinates achieves 73cm mean absolute error (outdoor), and device classification achieves 99% (same day) and 95% (next day) accuracy. The CSI datasets, ground-truth UE position labels, CSI features, and simulation code are publicly available at https://caez.ethz.ch

eess.SP↗

arXiv2025

Programmable and GPU-Accelerated Edge Inference for Real-Time ISAC on NVIDIA Aerial Testbed

The transition of cellular networks to (i) software-based systems on commodity hardware and (ii) platforms for services beyond connectivity introduces critical system-level challenges. As sensing emerges as a key feature toward 6G standardization, supporting Integrated Sensing and Communication (ISAC) with limited bandwidth and piggybacking on communication signals, while maintaining high reliability and performance, remains a fundamental challenge. In this paper, we provide two key contributions. First, we present a programmable, open-source framework for processing PHY/MAC signals through real-time, GPU-accelerated Artificial Intelligence (AI) applications on the edge Radio Access Network (RAN) infrastructure. Building on the Open RAN dApp architecture, the framework interfaces with a GPU-accelerated gNB based on NVIDIA Aerial Testbed (ATB), feeding PHY/MAC data to custom AI logic with a framework overhead of 150 us, multiple inference engines, and support for several AI backends. We evaluate the framework on multiple GPU platforms with and without hardware-level GPU isolation. Second, we demonstrate the framework capabilities through cuSense, an indoor localization dApp that consumes uplink DMRS channel estimates, removes static multipath components, and runs a neural network to infer the position of a moving person. Evaluated on a 3GPP-compliant 5G NR deployment, cuSense achieves a mean localization error of 77 cm, with 75% of predictions falling within 1 meter, without dedicated sensing hardware or modifications to the RAN stack or signals. The framework is released as open source, providing a reference design for future AI-native RANs and ISAC applications.

cs.NI↗

arXiv2025

Sparse MIMO-OFDM Channel Estimation via RKHS Regularization

We propose a method for channel estimation in multiple-input multiple-output (MIMO) orthogonal frequency-division multiplexing (OFDM) wireless communication systems. The method exploits the band-sparsity of wireless channels in the delay-beamspace domain by solving a regularized optimization problem in a reproducing kernel Hilbert space (RKHS). A suitable representer theorem allows us to transform the infinite-dimensional optimization problem into a finite-dimensional one, which we then approximate with a low-dimensional surrogate. We solve the resulting optimization problem using a forward-backward splitting (FBS)-based algorithm. By exploiting the problem's modulation structure, we achieve a computational complexity per iteration that is quasi-linear in the number of unknown variables. We also propose a data-driven deep-unfolding based extension to improve the performance at a reduced number of iterations. We evaluate our channel estimators on ray-traced channels generated with SionnaRT. The results show that our methods significantly outperform linear methods such as linear minimum mean squared error (LMMSE) channel estimation based on aggregate channel statistics, both in terms of raw estimation accuracy as well as in downstream performance.

eess.SP↗

arXiv2025

Better Together: Leveraging Multiple Digital Twins for Deployment Optimization of Airborne Base Stations

Airborne Base Stations (ABSs) allow for flexible geographical allocation of network resources with dynamically changing load as well as rapid deployment of alternate connectivity solutions during natural disasters. Since the radio infrastructure is carried by unmanned aerial vehicles (UAVs) with limited flight time, it is important to establish the best location for the ABS without exhaustive field trials. This paper proposes a digital twin (DT)-guided approach to achieve this through the following key contributions: (i) Implementation of an interactive software bridge between two open-source DTs such that the same scene is evaluated with high fidelity across NVIDIA's Sionna and Aerial Omniverse Digital Twin (AODT), highlighting the unique features of each of these platforms for this allocation problem, (ii) Design of a back-propagation-based algorithm in Sionna for rapidly converging on the physical location of the UAVs, orientation of the antennas and transmit power to ensure efficient coverage across the swarm of the UAVs, and (iii) numerical evaluation in AODT for large network scenarios (50 UEs, 10 ABS) that identifies the environmental conditions in which there is agreement or divergence of performance results between these twins. Finally, (iv) we propose a resilience mechanism to provide consistent coverage to mission-critical devices and demonstrate a use case for bi-directional flow of information between the two DTs.

cs.NI↗

arXiv2024

Optimizing Puncturing Patterns of 5G NR LDPC Codes for Few-Iteration Decoding

Rate-matching of low-density parity-check (LDPC) codes enables a single code description to support a wide range of code lengths and rates. In 5G NR, rate matching is accomplished by extending (lifting) a base code to a desired target length and by puncturing (not transmitting) certain code bits. LDPC codes and rate matching are typically designed for the asymptotic performance limit with an ideal decoder. Practical LDPC decoders, however, carry out tens or fewer message-passing decoding iterations to achieve the target throughput and latency of modern wireless systems. We show that one can optimize LDPC code puncturing patterns for such few-iteration-constrained decoders using a method we call swapping of punctured and transmitted blocks (SPAT). Our simulation results show that SPAT yields from 0.20 dB up to 0.55 dB improved signal-to-noise ratio performance compared to the standard 5G NR LDPC code puncturing pattern for a wide range of code lengths and rates.

cs.IT↗

arXiv2024

A Primer on Generative AI for Telecom: From Theory to Practice

The rise of generative artificial intelligence (GenAI) is transforming the telecom industry. GenAI models, particularly large language models (LLMs), have emerged as powerful tools capable of driving innovation, improving efficiency, and delivering superior customer services in telecom. This paper provides an overview of GenAI for telecom from theory to practice. We review GenAI models and discuss their practical applications in telecom. Furthermore, we describe the key technology enablers and best practices for applying GenAI to telecom effectively. We highlight the importance of retrieval augmented generation (RAG) in connecting LLMs to telecom domain specific data sources to enhance the accuracy of the LLMs' responses. We present a real-world use case on RAG-based chatbot that can answer open radio access network (O-RAN) specific questions. The demonstration of the chatbot to the O-RAN Alliance has triggered immense interest in the industry. We have made the O-RAN RAG chatbot publicly accessible on GitHub.

cs.NI↗

arXiv2024

X5G: An Open, Programmable, Multi-vendor, End-to-end, Private 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

As Fifth generation (5G) cellular systems transition to softwarized, programmable, and intelligent networks, it becomes fundamental to enable public and private 5G deployments that are (i) primarily based on software components while (ii) maintaining or exceeding the performance of traditional monolithic systems and (iii) enabling programmability through bespoke configurations and optimized deployments. This requires hardware acceleration to scale the Physical (PHY) layer performance, programmable elements in the Radio Access Network (RAN) and intelligent controllers at the edge, careful planning of the Radio Frequency (RF) environment, as well as end-to-end integration and testing. In this paper, we describe how we developed the programmable X5G testbed, addressing these challenges through the deployment of the first 8-node network based on the integration of NVIDIA Aerial RAN CoLab Over-the-Air (ARC-OTA), OpenAirInterface (OAI), and a near-real-time RAN Intelligent Controller (RIC). The Aerial Software Development Kit (SDK) provides the PHY layer, accelerated on Graphics Processing Unit (GPU), with the higher layers from the OAI open-source project interfaced with the PHY through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). An E2 agent provides connectivity to the O-RAN Software Community (OSC) near-real-time RIC. We discuss software integration, network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, as well as up to 25 emulated User Equipments (UEs), measuring a cell rate higher than 1.65 Gbps in downlink and 143 Mbps in uplink.

cs.NI↗

arXiv2023

An Open, Programmable, Multi-vendor 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface

The transition of fifth generation (5G) cellular systems to softwarized, programmable, and intelligent networks depends on successfully enabling public and private 5G deployments that are (i) fully software-driven and (ii) with a performance at par with that of traditional monolithic systems. This requires hardware acceleration to scale the Physical (PHY) layer performance, end-to-end integration and testing, and careful planning of the Radio Frequency (RF) environment. In this paper, we describe how the X5G testbed at Northeastern University has addressed these challenges through the first 8-node network deployment of the NVIDIA Aerial RAN CoLab (ARC), with the Aerial Software Development Kit (SDK) for the PHY layer, accelerated on Graphics Processing Unit (GPU), and through its integration with higher layers from the OpenAirInterface (OAI) open-source project through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). We discuss software integration, the network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, measuring a cell rate higher than 500 Mbps in downlink and 45 Mbps in uplink.

cs.NI↗

arXiv2023

ML-Based Feedback-Free Adaptive MCS Selection for Massive Multi-User MIMO

As wireless communication systems strive to improve spectral efficiency, there has been a growing interest in employing machine learning (ML)-based approaches for adaptive modulation and coding scheme (MCS) selection. In this paper, we introduce a new adaptive MCS selection framework for massive MIMO systems that operates without any feedback from users by solely relying on instantaneous uplink channel estimates. Our proposed method can effectively operate in multi-user scenarios where user feedback imposes excessive delay and bandwidth overhead. To learn the mapping between the user channel matrices and the optimal MCS level of each user, we develop a Convolutional Neural Network (CNN)-Long Short-Term Memory Network (LSTM)-based model and compare the performance with the state-of-the-art methods. Finally, we validate the effectiveness of our algorithm by evaluating it experimentally using real-world datasets collected from the RENEW massive MIMO platform.

eess.SP↗

arXiv2023

A Deep Reinforcement Learning-Based Resource Scheduler for Massive MIMO Networks

The large number of antennas in massive MIMO systems allows the base station to communicate with multiple users at the same time and frequency resource with multi-user beamforming. However, highly correlated user channels could drastically impede the spectral efficiency that multi-user beamforming can achieve. As such, it is critical for the base station to schedule a suitable group of users in each time and frequency resource block to achieve maximum spectral efficiency while adhering to fairness constraints among the users. In this paper, we consider the resource scheduling problem for massive MIMO systems with its optimal solution known to be NP-hard. Inspired by recent achievements in deep reinforcement learning (DRL) to solve problems with large action sets, we propose \name{}, a dynamic scheduler for massive MIMO based on the state-of-the-art Soft Actor-Critic (SAC) DRL model and the K-Nearest Neighbors (KNN) algorithm. Through comprehensive simulations using realistic massive MIMO channel models as well as real-world datasets from channel measurement experiments, we demonstrate the effectiveness of our proposed model in various channel conditions. Our results show that our proposed model performs very close to the optimal proportionally fair (Opt-PF) scheduler in terms of spectral efficiency and fairness with more than one order of magnitude lower computational complexity in medium network sizes where Opt-PF is computationally feasible. Our results also show the feasibility and high performance of our proposed scheduler in networks with a large number of users and resource blocks.

cs.IT↗

arXiv2022

DUIDD: Deep-Unfolded Interleaved Detection and Decoding for MIMO Wireless Systems

Iterative detection and decoding (IDD) is known to achieve near-capacity performance in multi-antenna wireless systems. We propose deep-unfolded interleaved detection and decoding (DUIDD), a new paradigm that reduces the complexity of IDD while achieving even lower error rates. DUIDD interleaves the inner stages of the data detector and channel decoder, which expedites convergence and reduces complexity. Furthermore, DUIDD applies deep unfolding to automatically optimize algorithmic hyperparameters, soft-information exchange, message damping, and state forwarding. We demonstrate the efficacy of DUIDD using NVIDIA's Sionna link-level simulator in a 5G-near multi-user MIMO-OFDM wireless system with a novel low-complexity soft-input soft-output data detector, an optimized low-density parity-check decoder, and channel vectors from a commercial ray-tracer. Our results show that DUIDD outperforms classical IDD both in terms of block error rate and computational complexity.

cs.IT↗

arXiv2022

6G Digital Twin Networks: From Theory to Practice

Digital twin networks (DTNs) are real-time replicas of physical networks. They are emerging as a powerful technology for design, diagnosis, simulation, what-if-analysis, and artificial intelligence (AI)/machine learning (ML) driven real-time optimization and control of the sixth-generation (6G) wireless networks. Despite the great potential of what digital twins can offer for 6G, realizing the desired capabilities of 6G DTNs requires tackling many design aspects including data, models, and interfaces. In this article, we provide an overview of 6G DTNs by presenting prominent use cases and their service requirements, describing a reference architecture, and discussing fundamental design aspects. We also present a real-world example to illustrate how DTNs can be built upon and operated in a real-time reference development platform - Omniverse.

cs.NI↗

arXiv2022

Accelerated massive MIMO detector based on annealed underdamped Langevin dynamics

We propose a multiple-input multiple-output (MIMO) detector based on an annealed version of the \emph{underdamped} Langevin (stochastic) dynamic. Our detector achieves state-of-the-art performance in terms of symbol error rate (SER) while keeping the computational complexity in check. Indeed, our method can be easily tuned to strike the right balance between computational complexity and performance as required by the application at hand. This balance is achieved by tuning hyperparameters that control the length of the simulated Langevin dynamic. Through numerical experiments, we demonstrate that our detector yields lower SER than competing approaches (including learning-based ones) with a lower running time compared to a previously proposed \emph{overdamped} Langevin-based MIMO detector.

eess.SP↗

arXiv2022

Bit Error and Block Error Rate Training for ML-Assisted Communication

Even though machine learning (ML) techniques are being widely used in communications, the question of how to train communication systems has received surprisingly little attention. In this paper, we show that the commonly used binary cross-entropy (BCE) loss is a sensible choice in uncoded systems, e.g., for training ML-assisted data detectors, but may not be optimal in coded systems. We propose new loss functions targeted at minimizing the block error rate and SNR deweighting, a novel method that trains communication systems for optimal performance over a range of signal-to-noise ratios. The utility of the proposed loss functions as well as of SNR deweighting is shown through simulations in NVIDIA Sionna.

cs.IT↗

arXiv2022

Embracing AI in 5G-Advanced Towards 6G: A Joint 3GPP and O-RAN Perspective

Artificial intelligence (AI) has emerged as a powerful technology that improves system performance and enables new features in 5G and beyond. Standardization, defining functionality and interfaces, is essential for driving the industry alignment required to deliver the mass adoption of AI in 5G-Advanced and 6G. However, fragmented efforts in different standards bodies, such as the third generation partnership project (3GPP) and the open radio access network (O-RAN) Alliance, can lead to confusion and uncertainty about which standards to follow and which aspects of the standards to embrace. This article provides a joint 3GPP and O-RAN perspective on the state of the art in AI adoption in mobile communication systems, including the fundamentals of 5G architecture and its evolution towards openness and intelligence, AI for 5G-Advanced evolution, and a case study on AI-enabled traffic steering. We also identify several areas for future exploration to accelerate AI adoption on the path towards 6G.

cs.NI↗