arXiv subjects

Chia-Hao Lee

Publications and source records attributed to Chia-Hao Lee.

11 recordsLinked to original sources

arXiv2026

Scalable Bayesian Optimization of Composite Functions for Image-Based Inverse Problems in Materials Characterization

Estimating physical parameters from scientific images is a common inverse problem in materials characterization that often relies on expensive physics-based simulations. In electron microscopy, specimen thickness and crystal mistilt are critical parameters that govern how electrons scatter through the sample, and therefore the accuracy of any atomic-scale structure recovered from it. They are commonly inferred by matching experimental position-averaged convergent-beam electron diffraction (PACBED) patterns to simulated ones, but grid searches scale poorly and neural-network methods require extensive pretraining that may not transfer to new conditions. Here, we propose scalable Bayesian optimization of composite functions (SBOCF), a simulation-efficient method that exploits the known composite structure of the image-matching objective and the intermediate information contained in simulated images. By representing PACBED images with patch-level summaries and two correction terms, SBOCF preserves the original pixel-wise objective while reducing the number of modeled outputs from 24,649 to 11. Under a budget of 50 simulator evaluations, SBOCF outperformed standard Bayesian optimization with expected improvement on synthetic SrTiO3 benchmarks with thick and thin specimens, reducing the median final SSE by up to 290x in the thick-sample case. On experimental data, SBOCF produced parameter estimates consistent with previously reported values without task-specific pretraining. For a simulated mistilted specimen, using the SBOCF estimates in a downstream ptychographic reconstruction recovered sharp atoms that were otherwise blurred. These results establish SBOCF as a promising approach for inverse problems involving expensive simulators and high-dimensional structured outputs.

cs.LG↗

arXiv2026

Stacking-order-dependent electronic properties of MoTe2/WSe2 moir\'e bilayers

Transition metal dichalcogenide (TMD) moir\'e bilayers have realized a wide range of strongly correlated and topological phenomena. The physics in these materials is often sensitive to the interlayer stacking order. Polarization-resolved optical second harmonic generation (SHG) is the most used technique for stacking order characterization but unverified for most heterobilayers. Here we calibrate the optical SHG for angle-aligned MoTe2/WSe2 bilayers by the scanning transmission electron microscopy (STEM). We directly compare the transport and magnetic properties and the electronic phase diagram for two distinct stacking orders. With the calibrated stacking order assignment, we clarify the interpretation of earlier results, including the nature of the Chern insulator, mechanism of an electric-field-tuned metal-insulator transition at half band filling, and the Kondo lattice physics. Our work provides a consistent picture of the relation between the stacking order and the electronic properties of MoTe2/WSe2 moir\'e bilayers.

cond-mat.mes-hall↗

arXiv2025

Mind the Gap -- Imaging Buried Interfaces in Twisted Oxide Moir\'es

The ability to tune electronic structure in twisted stacks of two-dimensional (2D) materials has motivated the exploration of similar moir\'e physics with twisted oxide membranes. Due to the intrinsic three-dimensional nature of bonding in many oxides, achieving atomic-level coupling is significantly more challenging than with van der Waals materials. Although clean interfaces with atomic-level proximity have been demonstrated in ceramic bicrystals using high-temperature and high-pressure processing to facilitate atomic diffusion that flattens rough interfaces, such conditions are not readily accessible when bonding oxide membranes. This study shows how topographic mismatch due to surface roughness of the membranes can restrict atomic-scale proximity at the interface to isolated patches even after contaminants and amorphous interlayers are eliminated. In interfaces between 2D materials and oxide membranes the reduced ability of the 2D material to conform to the membrane's step-terrace topography also limits atomic-scale contact. When imaging stacked membranes in projection, we find conventional through-focal imaging to be relatively insensitive to the buried interface, whereas electron ptychography detects structural variations on the order of a nanometer. These findings highlight interface roughness as a key challenge for the field of oxide twistronics and emphasize the need for reliable characterization methods, both in cross-section and projection.

cond-mat.mtrl-sci↗

arXiv2025

Improving Multislice Electron Ptychography with a Generative Prior

Multislice electron ptychography (MEP) is an inverse imaging technique that computationally reconstructs the highest-resolution images of atomic crystal structures from diffraction patterns. Available algorithms often solve this inverse problem iteratively but are both time consuming and produce suboptimal solutions due to their ill-posed nature. We develop MEP-Diffusion, a diffusion model trained on a large database of crystal structures specifically for MEP to augment existing iterative solvers. MEP-Diffusion is easily integrated as a generative prior into existing reconstruction methods via Diffusion Posterior Sampling (DPS). We find that this hybrid approach greatly enhances the quality of the reconstructed 3D volumes, achieving a 90.50% improvement in SSIM over existing methods.

eess.IV↗

arXiv2025

PtyRAD: A High-performance and Flexible Ptychographic Reconstruction Framework with Automatic Differentiation

Electron ptychography has recently achieved unprecedented resolution, offering valuable insights across diverse material systems, including in three dimensions. However, high-quality ptychographic reconstruction is computationally expensive and time consuming, requiring a significant amount of manually tuning even for experts. Additionally, essential tools for ptychographic analysis are often scattered across multiple software packages, with some advanced features available only in costly commercial software like MATLAB. To address these challenges, we introduce PtyRAD, an open-source software framework offers a comprehensive, flexible, and computationally efficient solution for electron ptychography. PtyRAD provides seamless optimization of multiple parameters--such as sample thickness, local tilts, probe positions, and mixed probe and object modes--using gradient-based methods with automatic differentiation (AD). By utilizing PyTorch's highly optimized tensor operations, PtyRAD achieves up to a 17x speedup in reconstruction time compared to existing packages without compromising image quality. In addition, we propose a real-space depth regularization, which avoids wrap-around artifacts and can be useful for twisted two-dimensional (2D) material datasets and vertical heterostructures. Moreover, PtyRAD integrates a Bayesian optimization workflow that streamlines hyperparameter selection. We hope the open-source nature of PtyRAD will foster reproducibility and community-driven development for future advances in ptychographic imaging.

cond-mat.mtrl-sci↗

arXiv2025

Atom-by-atom Imaging of Moir\'e Phasons using Electron Ptychography

Twisted 2D materials exhibit unique vibrational modes called moir\'e phonons, which arise from the moir\'e superlattice. Here, we demonstrate atom-by-atom imaging of phasons, an ultrasoft class of moir\'e phonons in twisted bilayer WSe2. Using ultrahigh-resolution (<15 pm) electron ptychography, we image the size and shape of each atom to extract time-averaged vibrational amplitudes as a function of twist angle and position. We observe several signature properties of moir\'e phasons, such as increased vibrational amplitudes at solitons and AA-stacked regions. By correlating experiments with molecular dynamics simulations and lattice dynamics calculations, we show phasons dominate the thermal vibrations in low-angle twisted bilayers. These results represent a powerful route to image thermal vibrations at atomic resolution, unlocking experimental studies of a thus-far hidden branch of moir\'e phonon physics.

cond-mat.mtrl-sci↗

arXiv2025

Microscopic mechanisms of flexoelectricity in oxide membranes

Modern electromechanical actuators and sensors rely on the piezoelectric effect that linearly couples strain and electric polarization. However, this effect is restricted to materials that lack inversion symmetry. In contrast, the flexoelectric effect couples strain gradients to electric polarization, and is a universal property in insulating materials of arbitrary symmetry. Flexoelectricity becomes prominent at the nanoscale from the inverse scaling of strain gradients with material dimensions. Here, we measure the strain-gradient-induced structural distortions in strontium titanate using multislice electron ptychography. This technique enables reliable picometer-scale measurements of the dominant oxygen-titanium distortions, correcting for artifacts that limited conventional imaging methods. This enables us to directly measure the sign of the net ionic contribution to the flexoelectric polarization. Guided by the experimental measurements, first-principles calculations show how the sign and magnitude of the bulk contribution to the flexoelectric coefficient in strontium titanate can be switched by tuning the strain state. Hybridization between the optical soft phonon and acoustic phonon modes drives this transition, yielding a large response and a polarity switch across the resonance. This strain-dependence might explain the sign discrepancy and orders of magnitude variation in the values of previously reported flexoelectric coefficients for strontium titanate. As the strain state of curved membranes can be tuned, our approach also suggests an approach to engineer nanoscale flexoelectric polarization using strain as a control parameter.

cond-mat.mtrl-sci↗

arXiv2023

Leveraging generative adversarial networks to create realistic scanning transmission electron microscopy images

The rise of automation and machine learning (ML) in electron microscopy has the potential to revolutionize materials research through autonomous data collection and processing. A significant challenge lies in developing ML models that rapidly generalize to large data sets under varying experimental conditions. We address this by employing a cycle generative adversarial network (CycleGAN) with a reciprocal space discriminator, which augments simulated data with realistic spatial frequency information. This allows the CycleGAN to generate images nearly indistinguishable from real data and provide labels for ML applications. We showcase our approach by training a fully convolutional network (FCN) to identify single atom defects in a 4.5 million atom data set, collected using automated acquisition in an aberration-corrected scanning transmission electron microscope (STEM). Our method produces adaptable FCNs that can adjust to dynamically changing experimental variables with minimal intervention, marking a crucial step towards fully autonomous harnessing of microscopy big data.

cond-mat.mtrl-sci↗

arXiv2023

In situ Imaging of an Anisotropic Layer-by-Layer Phase Transition in Few-Layer MoTe2

Understanding the phase transition mechanisms in two-dimensional (2D) materials is a key to precisely tailor their properties at the nanoscale. Molybdenum ditelluride (MoTe2) exhibits multiple phases at room temperature, making it a promising candidate for phase-change applications. Here, we fabricate lateral 2H-Td interfaces with laser irradiation and probe their phase transitions from micro- to atomic scales with in situ heating in the transmission electron microscope (TEM). By encapsulating the MoTe2 with graphene protection layers, we create an in situ reaction cell compatible with atomic resolution imaging. We find that the Td-to-2H phase transition initiates at phase boundaries at low temperatures (200-225 degree C) and propagates anisotropically along the b-axis in a layer-by-layer fashion. We also demonstrate a fully reversible 2H-Td-2H phase transition cycle, which generates a coherent 2H lattice containing inversion domain boundaries. Our results provide insights on fabricating 2D hetero-phase devices with atomically sharp and coherent interfaces.

cond-mat.mtrl-sci↗

arXiv2021

Nearly hyperuniform, nonhyperuniform, and antihyperuniform density fluctuations in two-dimensional transition metal dichalcogenides with defects

Hyperuniform many-body systems in $d$-dimensional Euclidean space are characterized by completely suppressed (normalized) infinite-wavelength density fluctuations, and appear to be endowed with novel exotic physical properties. In this work, we analyze the effects of localized defects on the density fluctuations across length scales and on the hyperuniformity property of experimental samples of two-dimensional transition metal dichalcogenides. In particular, we extract atomic coordinates from time series annular dark field-scanning transmission electron microscopy imaging data of 2D tungsten chalcogenides with the 2H structure showing continuous development and evolution of electron-beam induced defects, and construct the corresponding chemical-bonding informed coordination networks between the atoms. We then compute a variety of pair statistics and bond-orientational statistics to characterize the samples. At low defect concentrations, the corresponding materials are nearly hyperuniform. As more defects are introduced, the (approximate) hyperuniformity of the materials is gradually destroyed, and the system becomes non-hyperuniform even when the material still contains a significant amount of crystalline regions. At high defect concentrations, the structures become antihyperuniform with diverging (normalized) large-scale density fluctuations. Overall, the defected materials possess varying degrees of orientation order, and there is apparently no intermediate hexatic phase emerging. We also construct a minimalist structural model and demonstrate that the experimental samples can be essentially viewed as perturbed honeycomb crystals with small correlated displacements and double chalcogen vacancies.

cond-mat.soft↗

arXiv2020

Deep Learning Enabled Strain Mapping of Single-Atom Defects in 2D Transition Metal Dichalcogenides with Sub-picometer Precision

2D materials offer an ideal platform to study the strain fields induced by individual atomic defects, yet challenges associated with radiation damage have so-far limited electron microscopy methods to probe these atomic-scale strain fields. Here, we demonstrate an approach to probe single-atom defects with sub-picometer precision in a monolayer 2D transition metal dichalcogenide, WSe$_{2-2x}$Te$_{2x}$. We utilize deep learning to mine large datasets of aberration-corrected scanning transmission electron microscopy images to locate and classify point defects. By combining hundreds of images of nominally identical defects, we generate high signal-to-noise class-averages which allow us to measure 2D atomic coordinates with up to 0.3 pm precision. Our methods reveal that Se vacancies introduce complex, oscillating strain fields in the WSe$_{2-2x}$Te$_{2x}$ lattice which cannot be explained by continuum elastic theory. These results indicate the potential impact of computer vision for the development of high-precision electron microscopy methods for beam-sensitive materials.

cond-mat.mtrl-sci↗