arXiv subjects

Chen Li

Publications and source records attributed to Chen Li.

At least 181 records · Page 10Linked to original sources

arXiv2025

Coordinated appendages accumulate more energy to self-right on the ground

Animals and robots must right themselves after flipping over on the ground. The discoid cockroach pushes its wings against the ground in an attempt to dynamically self-right by a somersault. However, because this maneuver is strenuous, the animal often fails to overcome the potential energy barrier and makes continual attempts. In this process, the animal flails its legs, whose lateral perturbation eventually leads it to roll to the side to self-right. Our previous work developed a cockroach-inspired robot capable of leg-assisted, winged self-righting, and a robot simulation study revealed that the outcome of this strategy depends sensitively on wing-leg coordination (measured by the phase between their motions). Here, we further elucidate why this is the case by developing a template to model the complex hybrid dynamics resulting from discontinuous contact and actuation. We used the template to calculate the potential energy barrier that the body must overcome to self-right, mechanical energy contribution by wing pushing and leg flailing, and mechanical energy dissipation due to wing-ground collision. The template revealed that wing-leg coordination (phase) strongly affects self-righting outcome by changing mechanical energy budget. Well-coordinated appendage motions (good phase) accumulate more mechanical energy than poorly-coordinated motions (bad phase), thereby better overcoming the potential energy barrier to self-right more successfully. Finally, we demonstrated practical use of the template for predicting a new control strategy to further increase self-righting performance and informing robot design.

physics.bio-ph↗

arXiv2025

Sensing environmental physical interaction to traverse cluttered obstacles

The long-standing, dominant approach to robotic obstacle negotiation relies on mapping environmental geometry to avoid obstacles. However, this approach does not allow for traversal of cluttered obstacles, hindering applications such as search and rescue operations through earthquake rubble and exploration across lunar and Martian rocks. To overcome this challenge, robots must further sense and utilize environmental physical interactions to control themselves to traverse obstacles. Recently, a physics-based approach has been established towards this vision. Self-propelled robots interacting with obstacles results in a potential energy landscape. On this landscape, to traverse obstacles, a robot must escape from certain landscape basins that attract it into failure modes, to reach other basins that lead to successful modes. Thus, sensing the potential energy landscape is crucial. Here, we developed new methods and performed systematic experiments to demonstrate that the potential energy landscape can be estimated by sensing environmental physical interaction. We developed a minimalistic robot capable of sensing obstacle contact forces and torques for systematic experiments over a wide range of parameter space. Surprisingly, although these forces and torques are not fully conservative, they match the potential energy landscape gradients that are conservative forces and torques, enabling an accurate estimation of the potential energy landscape. Additionally, a bio-inspired strategy further enhanced estimation accuracy. Our results provided a foundation for further refining these methods for use in free-locomoting robots. Our study is a key step in establishing a new physics-based approach for robots to traverse clustered obstacles to advance their mobility in complex, real-world environments.

cs.RO↗

arXiv2025

Dynamic traversal of large gaps by insects and legged robots reveals a template

It is well known that animals can use neural and sensory feedback via vision, tactile sensing, and echolocation to negotiate obstacles. Similarly, most robots use deliberate or reactive planning to avoid obstacles, which relies on prior knowledge or high-fidelity sensing of the environment. However, during dynamic locomotion in complex, novel, 3-D terrains such as forest floor and building rubble, sensing and planning suffer bandwidth limitation and large noise and are sometimes even impossible. Here, we study rapid locomotion over a large gap, a simple, ubiquitous obstacle, to begin to discover general principles of dynamic traversal of large 3-D obstacles. We challenged the discoid cockroach and an open-loop six-legged robot to traverse a large gap of varying length. Both the animal and the robot could dynamically traverse a gap as large as 1 body length by bridging the gap with its head, but traversal probability decreased with gap length. Based on these observations, we developed a template that well captured body dynamics and quantitatively predicted traversal performance. Our template revealed that high approach speed, initial body pitch, and initial body pitch angular velocity facilitated dynamic traversal, and successfully predicted a new strategy of using body pitch control that increased the robot maximal traversal gap length by 50%. Our study established the first template of dynamic locomotion beyond planar surfaces and is an important step in expanding terradynamics into complex 3-D terrains.

physics.bio-ph↗

arXiv2025

Body-terrain interaction affects large bump traversal of insects and legged robots

Small animals and robots must often rapidly traverse large bump-like obstacles when moving through complex 3-D terrains, during which, in addition to leg-ground contact, their body inevitably comes into physical contact with the obstacles. However, we know little about the performance limits of large bump traversal and how body-terrain interaction affects traversal. To address these, we challenged the discoid cockroach and an open-loop six-legged robot to dynamically run into a large bump of varying height to discover the maximal traversal performance, and studied how locomotor modes and traversal performance are affected by body-terrain interaction. Remarkably, during rapid running, both the animal and the robot were capable of dynamically traversing a bump much higher than its hip height (up to 4 times the hip height for the animal and 3 times for the robot, respectively) at traversal speeds typical of running, with decreasing traversal probability with increasing bump height. A stability analysis using a novel locomotion energy landscape model explained why traversal was more likely when the animal or robot approached the bump with a low initial body yaw and a high initial body pitch, and why deflection was more likely otherwise. Inspired by these principles, we demonstrated a novel control strategy of active body pitching that increased the robot maximal traversable bump height by 75%. Our study is a major step in establishing the framework of locomotion energy landscapes to understand locomotion in complex 3-D terrains.

physics.bio-ph↗

arXiv2025

Robotic modeling of snake traversing large, smooth obstacles reveals stability benefits of body compliance

Snakes can move through almost any terrain. Although their locomotion on flat surfaces using planar gaits is inherently stable, when snakes deform their body out of plane to traverse complex terrain, maintaining stability becomes a challenge. On trees and desert dunes, snakes grip branches or brace against depressed sand for stability. However, how they stably surmount obstacles like boulders too large and smooth to gain such anchor points is less understood. Similarly, snake robots are challenged to stably traverse large, smooth obstacles for search and rescue and building inspection. Our recent study discovered that snakes combine body lateral undulation and cantilevering to stably traverse large steps. Here, we developed a snake robot with this gait and snake-like anisotropic friction and used it as a physical model to understand stability principles. The robot traversed steps as high as a third of its body length rapidly and stably. However, on higher steps, it was more likely to fail due to more frequent rolling and flipping over, which was absent in the snake with a compliant body. Adding body compliance reduced the robot roll instability by statistically improving surface contact, without reducing speed. Besides advancing understanding of snake locomotion, our robot achieved high traversal speed surpassing most previous snake robots and approaching snakes, while maintaining high traversal probability.

physics.bio-ph↗

arXiv2025

Terradynamically streamlined shapes in animals and robots enhances traversability through densely cluttered terrain

Many animals, modern aircraft, and underwater vehicles use streamlined body shapes that reduce fluid dynamic drag to achieve fast and effective locomotion in air and water. Similarly, numerous small terrestrial animals move through cluttered terrain where 3-D, multi-component obstacles like grass, shrubs, vines, and leaf litter resist motion, but it is unknown whether their body shape plays a major role in traversal. Few ground vehicles or terrestrial robots have used body shape to effectively traverse cluttered terrain. Here, we challenged forest-floor-dwelling discoid cockroaches possessing a thin, rounded body to traverse tall, narrowly spaced, vertical, grass-like compliant beams. Animals displayed high traversal performance (79 +/- 12% probability and 3.4 +/- 0.7 s time). Although we observed diverse traversal strategies, cockroaches primarily (48 +/- 9 % probability) used a novel roll maneuver, allowing them to rapidly traverse obstacle gaps narrower than half body width (2.0 +/- 0.5 s traversal time). Reduction of body roundness by addition of artificial shells nearly inhibited roll maneuvers and decreased traversal performance. Inspired by this discovery, we added a thin, rounded exoskeletal shell to a legged robot with a nearly cuboidal body, common to many existing terrestrial robots. Without adding sensory feedback or changing the open-loop control, the rounded shell enabled the robot to traverse beam obstacles with gaps narrower than shell width via body roll. Terradynamically streamlined shapes can reduce terrain resistance and enhance traversability by assisting effective body reorientation via distributed mechanical feedback. Our findings highlight the need to consider body shape to improve robot mobility in real-world terrain often filled with clutter, and to develop better locomotor-ground contact models to understand interaction with complex terrain.

physics.bio-ph↗

arXiv2025

Snakes partition their body to traverse large steps stably

Many snakes live in deserts, forests, and river valleys and traverse challenging 3-D terrain like rocks, felled trees, and rubble, with obstacles as large as themselves and variable surface properties. By contrast, apart from branch cantilevering, burrowing, swimming, and gliding, laboratory studies of snake locomotion focused on that on simple flat surfaces. Here, to begin to understand snake locomotion in complex 3-D terrain, we study how the variable kingsnake, a terrestrial generalist, traversed a large step of variable surface friction and step height (up to 30% snout-vent length). The snake traversed by partitioning its body into three sections with distinct functions. Body sections below and above the step oscillated laterally on horizontal surfaces for propulsion, while the body section in between cantilevered in a vertical plane to bridge the large height increase. As the animal progressed, these three sections traveled down its body, conforming overall body shape to the step. In addition, the snake adjusted the partitioned gait in response to increase in step height and decrease in surface friction, at the cost of reduced speed. As surface friction decreased, body movement below and above the step changed from a continuous lateral undulation with little slip to an intermittent oscillatory movement with much slip, and initial head lift-off became closer to the step. Given these adjustments, body partitioning allowed the snake to be always stable, even when initially cantilevering but before reaching the surface above. Such a partitioned gait may be generally useful for diverse, complex 3-D terrain.

physics.bio-ph↗

arXiv2025

Cockroaches use diverse strategies to self-right on the ground

Terrestrial animals often must self-right from an upside-down orientation on the ground to survive. Here, we compared self-righting strategies of the Madagascar hissing, American, and discoid cockroaches on a challenging flat, rigid, low-friction surface to quantify the mechanical principles. All three species almost always self-righted (97% probability) when given time (30 seconds), frequently self-righted (63%) on the first attempt, and on that attempt did so in one second or less. When successful, two of the three species gained and used pitch and/or roll rotational kinetic energy to overcome potential energy barriers (American 63% of all attempts and discoid 78%). By contrast, the largest, heaviest, wingless cockroach (Madagascar hissing) relied far less on the energy of motion and was the slowest to self-right. Two of the three species used rolling strategies to overcome low potential energy barriers. Successful righting attempts had greater rolling rotation than failed attempts as the center of mass rose to the highest position. Madagascar hissing cockroaches rolled using body deformation (98% of all trials) and the American cockroach relied on leg forces (93%). By contrast, the discoid cockroach overcame higher and a wider range of potential energy barriers with simultaneous pitching and rolling using wings (46% of all trials) and legs (49%) equally to self-right. Our quantification revealed the performance advantages of using rotational kinetic energy to overcome the potential energy barrier and rolling more to lower it, while maintaining diverse strategies for ground-based self-righting.

physics.bio-ph↗

arXiv2025

Snakes combine vertical and lateral bending to traverse uneven terrain

Terrestrial locomotion requires generating appropriate ground reaction forces which depend on substrate geometry and physical properties. The richness of positions and orientations of terrain features in the 3-D world gives limbless animals like snakes that can bend their body versatility to generate forces from different contact areas for propulsion. Despite many previous studies of how snakes use lateral body bending for propulsion on relatively flat surfaces with lateral contact points, little is known about whether and how much snakes use vertical body bending in combination with lateral bending in 3-D terrain. This lack had contributed to snake robots being inferior to animals in stability, efficiency, and versatility when traversing complex 3-D environments. Here, to begin to elucidate this, we studied how the generalist corn snake traversed an uneven arena of blocks of random height variation 5 times its body height. The animal traversed the uneven terrain with perfect stability by propagating 3-D bending down its body with little transverse motion (11° slip angle). Although the animal preferred moving through valleys with higher neighboring blocks, it did not prefer lateral bending. Among body-terrain contact regions that potentially provide propulsion, 52% were formed by vertical body bending and 48% by lateral bending. The combination of vertical and lateral bending may dramatically expand the sources of propulsive forces available to limbless locomotors by utilizing various asperities available in 3-D terrain. Direct measurements of contact forces are necessary to further understand how snakes coordinate 3-D bending along the entire body via sensory feedback to propel through 3-D terrain. These studies will open a path to new propulsive mechanisms for snake robots, potentially increasing the performance and versatility in 3-D terrain.

physics.bio-ph↗

arXiv2025

Environmental force sensing helps robots traverse cluttered large obstacles using physical interaction

Many applications require robots to move through complex 3-D terrain with large obstacles, such as self-driving, search and rescue, and extraterrestrial exploration. Although robots are already excellent at avoiding sparse obstacles, they still struggle in traversing cluttered large obstacles. To make progress, we need to better understand how to use and control the physical interaction with obstacles to traverse them. Forest floor-dwelling cockroaches can use physical interaction to transition between different locomotor modes to traverse flexible, grass-like beams of a large range of stiffness. Inspired by this, here we studied whether and how environmental force sensing helps robots make active adjustments to traverse cluttered large obstacles. We developed a physics model and a simulation of a minimalistic robot capable of sensing environmental forces during traversal of beam obstacles. Then, we developed a force-feedback control strategy, which estimated beam stiffness from the sensed contact force using the physics model. Then in simulation we used the estimated stiffness to control the robot to either stay in or transition to the more favorable locomotor modes to traverse. When beams were stiff, force sensing induced the robot to transition from a more costly pitch mode to a less costly roll mode, which helped the robot traverse with a higher success rate and less energy consumed. By contrast, if the robot simply pushed forward or always avoided obstacles, it would consume more energy, become stuck in front of beams, or even flip over. When the beams were flimsy, force sensing guided the robot to simply push across the beams. In addition, we demonstrated the robustness of beam stiffness estimation against body oscillations, randomness in oscillation, and uncertainty in position sensing. We also found that a shorter sensorimotor delay reduced energy cost of traversal.

cs.RO↗

arXiv2025

Molecular Generative Adversarial Network with Multi-Property Optimization

Deep generative models, such as generative adversarial networks (GANs), have been employed for $de~novo$ molecular generation in drug discovery. Most prior studies have utilized reinforcement learning (RL) algorithms, particularly Monte Carlo tree search (MCTS), to handle the discrete nature of molecular representations in GANs. However, due to the inherent instability in training GANs and RL models, along with the high computational cost associated with MCTS sampling, MCTS RL-based GANs struggle to scale to large chemical databases. To tackle these challenges, this study introduces a novel GAN based on actor-critic RL with instant and global rewards, called InstGAN, to generate molecules at the token-level with multi-property optimization. Furthermore, maximized information entropy is leveraged to alleviate the mode collapse. The experimental results demonstrate that InstGAN outperforms other baselines, achieves comparable performance to state-of-the-art models, and efficiently generates molecules with multi-property optimization. The source code will be released upon acceptance of the paper.

q-bio.BM↗

arXiv2025

A Bayesian thinning algorithm for the point source identification of heat equation

In this work, we propose a Bayesian thinning algorithm for recovering weighted point source functions in the heat equation from boundary flux observations. The major challenge in the classical Bayesian framework lies in constructing suitable priors for such highly structured unknowns. To address this, we introduce a level set representation on a discretized mesh for the unknown, which enables the infinite-dimensional Bayesian framework to the reconstruction. From another perspective, the point source configuration can be modeled as a marked Poisson point process (PPP), then a thinning mechanism is employed to selectively retain points. These two proposals are complementary with the Bayesian level set sampling generating candidate point sources and the thinning process acting as a filter to refine them. This combined framework is validated through numerical experiments, which demonstrate its accuracy in reconstructing point sources.

stat.CO↗

arXiv2025

Mitigating Easy Option Bias in Multiple-Choice Question Answering

In this early study, we observe an Easy-Options Bias (EOB) issue in some multiple-choice Visual Question Answering (VQA) benchmarks such as MMStar, RealWorldQA, SEED-Bench, Next-QA, STAR benchmark and Video-MME. This bias allows vision-language models (VLMs) to select the correct answer using only the vision (V) and options (O) as inputs, without the need for the question (Q). Through grounding experiments, we attribute the bias to an imbalance in visual relevance: the correct answer typically aligns more closely with the visual contents than the negative options in feature space, creating a shortcut for VLMs to infer the answer via simply vision-option similarity matching. To fix this, we introduce GroundAttack, a toolkit that automatically generates hard negative options as visually plausible as the correct answer. We apply it to the NExT-QA and MMStar datasets, creating new EOB-free annotations. On these EOB-free annotations, current VLMs approach to random accuracies under (V+O) settings, and drop to non-saturated accuracies under (V+Q+O) settings, providing a more realistic evaluation of VLMs' QA ability. Codes and new annotations will be released soon.

cs.CV↗

arXiv2025

TimeMachine: Fine-Grained Facial Age Editing with Identity Preservation

With the advancement of generative models, facial image editing has made significant progress. However, achieving fine-grained age editing while preserving personal identity remains a challenging task. In this paper, we propose TimeMachine, a novel diffusion-based framework that achieves accurate age editing while keeping identity features unchanged. To enable fine-grained age editing, we inject high-precision age information into the multi-cross attention module, which explicitly separates age-related and identity-related features. This design facilitates more accurate disentanglement of age attributes, thereby allowing precise and controllable manipulation of facial aging. Furthermore, we propose an Age Classifier Guidance (ACG) module that predicts age directly in the latent space, instead of performing denoising image reconstruction during training. By employing a lightweight module to incorporate age constraints, this design enhances age editing accuracy by modest increasing training cost. Additionally, to address the lack of large-scale, high-quality facial age datasets, we construct a HFFA dataset (High-quality Fine-grained Facial-Age dataset) which contains one million high-resolution images labeled with identity and facial attributes. Experimental results demonstrate that TimeMachine achieves state-of-the-art performance in fine-grained age editing while preserving identity consistency.

cs.CV↗

arXiv2025

We-Math 2.0: A Versatile MathBook System for Incentivizing Visual Mathematical Reasoning

Multimodal Large Language Models (MLLMs) have demonstrated impressive capabilities across various tasks, but still struggle with complex mathematical reasoning. Existing research primarily focuses on dataset construction and method optimization, often overlooking two critical aspects: comprehensive knowledge-driven design and model-centric data space modeling. In this paper, we introduce We-Math 2.0, a unified system that integrates a structured mathematical knowledge system, model-centric data space modeling, and a reinforcement learning (RL)-based training paradigm to comprehensively enhance the mathematical reasoning abilities of MLLMs. The key contributions of We-Math 2.0 are fourfold: (1) MathBook Knowledge System: We construct a five-level hierarchical system encompassing 491 knowledge points and 1,819 fundamental principles. (2) MathBook-Standard & Pro: We develop MathBook-Standard, a dataset that ensures broad conceptual coverage and flexibility through dual expansion. Additionally, we define a three-dimensional difficulty space and generate 7 progressive variants per problem to build MathBook-Pro, a challenging dataset for robust training. (3) MathBook-RL: We propose a two-stage RL framework comprising: (i) Cold-Start Fine-tuning, which aligns the model with knowledge-oriented chain-of-thought reasoning; and (ii) Progressive Alignment RL, leveraging average-reward learning and dynamic data scheduling to achieve progressive alignment across difficulty levels. (4) MathBookEval: We introduce a comprehensive benchmark covering all 491 knowledge points with diverse reasoning step distributions. Experimental results show that MathBook-RL performs competitively with existing baselines on four widely-used benchmarks and achieves strong results on MathBookEval, suggesting promising generalization in mathematical reasoning.

cs.AI↗

arXiv2025

Text-guided Visual Prompt DINO for Generic Segmentation

Recent advancements in multimodal vision models have highlighted limitations in late-stage feature fusion and suboptimal query selection for hybrid prompts open-world segmentation, alongside constraints from caption-derived vocabularies. To address these challenges, we propose Prompt-DINO, a text-guided visual Prompt DINO framework featuring three key innovations. First, we introduce an early fusion mechanism that unifies text/visual prompts and backbone features at the initial encoding stage, enabling deeper cross-modal interactions to resolve semantic ambiguities. Second, we design order-aligned query selection for DETR-based architectures, explicitly optimizing the structural alignment between text and visual queries during decoding to enhance semantic-spatial consistency. Third, we develop a generative data engine powered by the Recognize Anything via Prompting (RAP) model, which synthesizes 0.5B diverse training instances through a dual-path cross-verification pipeline, reducing label noise by 80.5% compared to conventional approaches. Extensive experiments demonstrate that Prompt-DINO achieves state-of-the-art performance on open-world detection benchmarks while significantly expanding semantic coverage beyond fixed-vocabulary constraints. Our work establishes a new paradigm for scalable multimodal detection and data generation in open-world scenarios. Data&Code are available at https://github.com/WeChatCV/WeVisionOne.

cs.CV↗

arXiv2025

GLM-4.5: Agentic, Reasoning, and Coding (ARC) Foundation Models

We present GLM-4.5, an open-source Mixture-of-Experts (MoE) large language model with 355B total parameters and 32B activated parameters, featuring a hybrid reasoning method that supports both thinking and direct response modes. Through multi-stage training on 23T tokens and comprehensive post-training with expert model iteration and reinforcement learning, GLM-4.5 achieves strong performance across agentic, reasoning, and coding (ARC) tasks, scoring 70.1% on TAU-Bench, 91.0% on AIME 24, and 64.2% on SWE-bench Verified. With much fewer parameters than several competitors, GLM-4.5 ranks 3rd overall among all evaluated models and 2nd on agentic benchmarks. We release both GLM-4.5 (355B parameters) and a compact version, GLM-4.5-Air (106B parameters), to advance research in reasoning and agentic AI systems. Code, models, and more information are available at https://github.com/zai-org/GLM-4.5.

cs.CL↗

arXiv2025

IMoRe: Implicit Program-Guided Reasoning for Human Motion Q&A

Existing human motion Q\&A methods rely on explicit program execution, where the requirement for manually defined functional modules may limit the scalability and adaptability. To overcome this, we propose an implicit program-guided motion reasoning (IMoRe) framework that unifies reasoning across multiple query types without manually designed modules. Unlike existing implicit reasoning approaches that infer reasoning operations from question words, our model directly conditions on structured program functions, ensuring a more precise execution of reasoning steps. Additionally, we introduce a program-guided reading mechanism, which dynamically selects multi-level motion representations from a pretrained motion Vision Transformer (ViT), capturing both high-level semantics and fine-grained motion cues. The reasoning module iteratively refines memory representations, leveraging structured program functions to extract relevant information for different query types. Our model achieves state-of-the-art performance on Babel-QA and generalizes to a newly constructed motion Q\&A dataset based on HuMMan, demonstrating its adaptability across different motion reasoning datasets. Code and dataset are available at: https://github.com/LUNAProject22/IMoRe.

cs.CV↗