arXiv subjects

Chen Ge

Publications and source records attributed to Chen Ge.

At least 19 recordsLinked to original sources

arXiv2025

Observation of square-like moire lattice and quasicrystalline order in twisted rock-salt nitrides

Twistronics, which exploits moire modulation of lattice and electronic structures in twisted bilayers, has emerged as a powerful approach to engineer novel quantum states. Recent efforts have expanded beyond two dimensional van der Waals (vdWs) crystals to more complex, strongly correlated materials, where interfacial moire effects can dominate physical properties. Here we demonstrate a generalizable route to fabricate twisted bilayers of transition metal nitrides with vdWs like interfaces, using freestanding CrN membranes as a model system. Twisted bilayer CrN (tCrN) is realized by employing cubic alkaline earth metal monoxides as sacrificial layers, enabling the assembly of clean, controllable interfaces. Electron ptychography reveals well defined, periodic square moire superlattices in tCrN. For a twist angle of 16.3 degree, we identify a nearly commensurate moire lattice with coincident Cr columns, whereas at 45 degree we uncover localized octagonal quasicrystalline order with clear self-similarity. These results establish a practical platform for twisted TMNs and open avenues to explore moire-induced atomic configurations and emergent correlated phenomena in nitride based heterostructures.

cond-mat.mtrl-sci↗

arXiv2025

Unusual strain relaxation and Dirac semimetallic behavior in epitaxial antiperovskite nitrides

Antiperovskite nitrides (X3AN) are the structural analogues to perovskite oxides, while their epitaxial growth and electronic properties remain largely unexplored. We report the successful synthesis of Ni3InN thin films on substrates with different lattice constants. First-principles phonon calculations confirm the dynamical stability of cubic phase Ni3InN, providing the basis for epitaxial synthesis. High-resolution scanning transmission electron microscopy reveals coherent (001)-oriented interfaces when Ni3InN is grown on LaAlO3 and SrTiO3, while an unexpected (011)-orientation forms on DyScO3, aligning with surface-energy predictions. Transport measurements highlight a strain-controlled Fermi-liquid behavior, correlated with variations in the Ni-3d bandwidth and hybridization. Band structure calculations reveal a dual character near the Fermi level: a high-mobility Dirac-like band and a Ni-3d manifold that drives strange-metal transport with a reduced slope compared to oxide perovskites. The formal Ni valence (+2/3) places Ni3InN in an overdoped correlated-metal regime, distinguishing from most perovskite oxides. This positions antiperovskite nitrides as a promising platform for investigating overdoped Fermi liquids and strange-metal behavior.

cond-mat.mtrl-sci↗

arXiv2025

Advancing Antiferromagnetic Nitrides via Metal Alloy Nitridation

Nitride materials, valued for their structural stability and exceptional physical properties, have garnered significant interest in both fundamental research and technological applications. The fabrication of high-quality nitride thin films is essential for advancing their use in microelectronics and spintronics. Yet, achieving single-crystal nitride thin films with excellent structural integrity remains a challenge. Here, we introduce a straightforward yet innovative metallic alloy nitridation technique for the synthesis of stable single-crystal nitride thin films. By subjecting metal alloy thin films to a controlled nitridation process, nitrogen atoms integrate into the lattice, driving structural transformations while preserving high epitaxial quality. Combining nanoscale magnetic imaging with a diamond nitrogen-vacancy (NV) probe, X-ray magnetic linear dichroism, and comprehensive transport measurements, we confirm that the nitridated films exhibit a robust antiferromagnetic character with a zero net magnetic moment. This work not only provides a refined and reproducible strategy for the fabrication of nitride thin films but also lays a robust foundation for exploring their burgeoning device applications.

cond-mat.mtrl-sci↗

arXiv2025

Room-temperature magnetoelectric coupling in strontium titanate

Magnetoelectric (ME) multiferroics enable efficient interconversion of electrical and magnetic signals, offering pathways toward substantial reduction of power consumption in next-generation computing and information technologies. However, despite decades of research, the persistence of ME coupling at room-temperature, an indispensable feature for practical applications, remains exceedingly rare in single-phase materials, due to symmetry constraints imposed by magnetic point groups and competing electronic requirements for ferroelectricity and magnetism. Here we report the coexistence of ferroelectricity and ferromagnetism at 780 K and a strong ME coupling with a converse ME coupling coefficient up to 498 ps/m at room-temperature in strontium titanate by dedicated vacancy engineering. The asymmetric distribution of oxygen vacancies surrounding titanium vacancies enables atomic displacement of titanium and charge injection, providing joint origin for ferroelectricity and ferromagnetism, as confirmed by atomic-scale structural analysis and first-principles calculations. The mechanism of ME coupling is offered as the hopping of oxygen vacancies under electric fields, which leads to the rearrangement of electronic configuration. Our work opens an avenue for designing multiferroics, overcoming the long-standing scarcity of room-temperature single-phase multiferroics.

cond-mat.mtrl-sci↗

arXiv2025

Charge transfer induced insulating state at antiperovskite/perovskite heterointerfaces

Heterointerfaces have been pivotal in unveiling extraordinary interfacial properties and enabling multifunctional material platforms. Despite extensive research on all-oxide interfaces, heterointerfaces between different material classes, such as oxides and nitrides, remain underexplored. Here we present the fabrication of a high-quality Dirac metal antiperovskite Ni3InN, characterized by an extremely low temperature coefficient of resistivity, approximately 1.8*10^-8 {\Omega}*cm/K, over a broad temperature range. Atomically sharp heterointerfaces between Ni3InN and SrVO3 were constructed, revealing intriguing interfacial phenomena. Leveraging layer-resolved scanning transmission electron microscopy and electron energy loss spectroscopy, we identified pronounced charge transfer across the well-ordered interface. Remarkably, this interfacial electron transfer from Ni3InN to SrVO3 induces an insulating interfacial layer and an emergent magnetic moment within the Ni3InN layer, consistent with first-principles calculations. These findings pave the way for novel electronic and spintronic applications by enabling tunable interfacial properties in nitride/oxide systems.

cond-mat.mtrl-sci↗

arXiv2024

Confined Magnetization at the Sublattice-Matched Ruthenium Oxide Heterointerface

Creating a heterostructure by combining two magnetically and structurally distinct ruthenium oxides is a crucial approach for investigating their emergent magnetic states and interactions. Previously, research has predominantly concentrated on the intrinsic properties of the ferromagnet SrRuO3 and recently discovered altermagnet RuO2 solely. Here, we engineered an ultrasharp sublattice-matched heterointerface using pseudo-cubic SrRuO3 and rutile RuO2, conducting an in-depth analysis of their spin interactions. Structurally, to accommodate the lattice symmetry mismatch, the inverted RuO2 layer undergoes an in-plane rotation of 18 degrees during epitaxial growth on SrRuO3 layer, resulting in an interesting and rotational interface with perfect crystallinity and negligible chemical intermixing. Performance-wise, the interfacial layer of 6 nm in RuO2 adjacent to SrRuO3 exhibits a nonzero magnetic moment, contributing to an enhanced anomalous Hall effect (AHE) at low temperatures. Furthermore, our observations indicate that, in contrast to SrRuO3 single layers, the AHE of [(RuO2)15/(SrRuO3)n] heterostructures shows nonlinear behavior and reaches its maximum when the SrRuO3 thickness reaches tens of nm. These results suggest that the interfacial magnetic interaction surpasses that of all-perovskite oxides (~5-unit cells). This study underscores the significance and potential applications of magnetic interactions based on the crystallographic asymmetric interfaces in the design of spintronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Deteriorated Interlayer Coupling in Twisted Bilayer Cobaltites

A wealth of remarkable behaviors is observed at the interfaces between magnetic oxides due to the coexistence of Coulomb repulsion and interatomic exchange interactions. While previous research has focused on bonded oxide heterointerfaces, studies on magnetism in van der Waals interfaces remain rare. In this study, we stacked two freestanding cobaltites with precisely controlled twist angles. Scanning transmission electron microscopy revealed clear and ordered moir\'e patterns, which exhibit an inverse relationship with the twist angle. We found that the Curie temperature in the twisted region is reduced by approximately 13 K compared to the single-layer region using nitrogen-vacancy (NV) magnetometry. This phenomenon may be related to the weakening of the orbital hybridization between oxygen ions and transition metal ions in the unbonded interfaces. Our findings suggest a potential avenue for modulating magnetic interactions in correlated systems through twist, providing opportunities for the discovery of unknown quantum states.

cond-mat.mtrl-sci↗

arXiv2024

A single-phase epitaxially grown ferroelectric perovskite nitride

The integration of ferroelectrics with semiconductors is crucial for developing functional devices, such as field-effect transistors, tunnel junctions, and nonvolatile memories. However, the synthesis of high-quality single-crystalline ferroelectric nitride perovskites has been limited, hindering a comprehensive understanding of their switching dynamics and potential applications. Here we report the synthesis and characterizations of epitaxial single-phase ferroelectric cerium tantalum nitride (CeTaN3) on both oxides and semiconductors. The polar symmetry of CeTaN3 was confirmed by observing the atomic displacement of central ions relative to the center of the TaN6 octahedra, as well as through optical second harmonic generation. We observed switchable ferroelectric domains in CeTaN3 films using piezo-response force microscopy, complemented by the characterization of square-like polarization-electric field hysteresis loops. The remanent polarization of CeTaN3 reaches approximately 20 uC/cm2 at room temperature, consistent with theoretical calculations. This work establishes a vital link between ferroelectric nitride perovskites and their practical applications, paving the way for next-generation information and energy-storage devices with enhanced performance, scalability, and manufacturability.

cond-mat.mtrl-sci↗

arXiv2024

Precise structure and polarization determination of Hf0.5Zr0.5O2 with electron ptychography

Hf0.5Zr0.5O2 (HZO) is a promising candidate for next generation ferroelectric memories and transistors. However, its ferroelectricity origin is still under debate due to the complex of its phase and microstructure in practical samples. In this study, we investigate the atomic structure of substrate-free HZO freestanding film with multislice electron ptychography, for which the ultra-high space resolution (up to ~25 pm) and capability to simultaneously image the cation and oxygen allow us to precisely determine the intrinsic atomic structures of different phases and reveal subtle changes among them. We clarify that the orthorhombic phase is ferroelectric with spontaneous polarization ~34{\pm}4 {\mu}C/cm2 (corresponding to 56{\pm}6 pm in displacement) that is accurately measured through statistical analysis. Significant polarization suppression is observed near the grain boundary, while no distinguishable structural changes are detected near the 180{\deg} ferroelectric domain walls. Through the direct oxygen imaging of orthorhombic phase from the [111] zone axis, we quantify a substantial number of oxygen vacancies with a preferential distribution, which influences the polarization direction and strength. These findings provide fundamentals for HZO research, and thus lay a foundation for the design of high-performance ferroelectric devices.

cond-mat.mtrl-sci↗

arXiv2023

Metal-to-insulator transition in oxide semimetals by anion doping

Oxide semimetals exhibiting both nontrivial topological characteristics stand as exemplary parent compounds and multiple degrees of freedom, offering great promise for the realization of novel electronic states. In this study, we present compelling evidence of profound structural and transport phase shifts in a recently uncovered oxide semimetal, SrNbO3, achieved through effective in-situ anion doping. Notably, a remarkable increase in resistivity of more than three orders of magnitude at room temperature is observed upon nitrogen-doping. The extent of electronic modulation in SrNbO3 is strongly correlated with the misfit strain, underscoring its phase instability to both chemical doping and crystallographic symmetry variations. Using first-principles calculations, we discern that elevating the level of nitrogen doping induces an upward shift in the conductive bands of SrNbO3-dNd. Consequently, a transition from a metallic state to an insulating state becomes apparent as the nitrogen concentration reaches a threshold of 1/3. This investigation sheds light on the potential of anion engineering in oxide semimetals, offering pathways for manipulating their physical properties. These insights hold promise for future applications that harness these materials for tailored functionalities.

cond-mat.mtrl-sci↗

arXiv2023

Strain mediated phase crossover in Ruddlesden Popper nickelates

Recent progress on the signatures of pressure-induced high temperature superconductivity in Ruddlesden Popper (RP) nickelates (Lan+1NinO3n+1) has attracted growing interest in both theoretical calculations and experimental efforts. The fabrication of high-quality single crystalline RP nickelate thin films is critical for possible reducing the superconducting transition pressure and advancing applications in microelectronics in the future. In this study, we report the observations of an active phase transition in RP nickelate films induced by misfit strain. We found that RP nickelate films favor the perovskite structure (n = infinite) under tensile strains, while compressive strains stabilize the La3Ni2O7 (n = 2) phase. The selection of distinct phases is governed by the strain dependent formation energy and electronic configuration. In compressively strained La3Ni2O7, we experimentally determined splitting energy is ~0.2 eV and electrons prefer to occupy in-plane orbitals. First principles calculations unveil a robust coupling between strain effects and the valence state of Ni ions in RP nickelates, suggesting a dual driving force for the inevitable phase co-existence transition in RP nickelates. Our work underscores the sensitivity of RP nickelate formation to epitaxial strain, presenting a significant challenge in fabricating pure-phase RP nickelate films. Therefore, special attention to stacking defects and grain boundaries between different RP phases is essential when discussing the pressure-induced superconductivity in RP nickelates.

cond-mat.supr-con↗

arXiv2022

Atomically engineered cobaltite layers for robust ferromagnetism

Emergent phenomena at heterointerfaces are directly associated with the bonding geometry of adjacent layers. Effective control of accessible parameters, such as the bond length and bonding angles, offers an elegant method to tailor competing energies of the electronic and magnetic ground states. In this study, we construct unit thick syntactic layers of cobaltites within a strongly tilted octahedral matrix via atomically precise synthesis. The octahedral tilt patterns of adjacent layers propagate into cobaltites, leading to a continuation of octahedral tilting while maintaining significant misfit tensile strain. These effects induce severe rumpling within an atomic plane of neighboring layers triggers the electronic reconstruction between the splitting orbitals. First-principles calculations reveal that the cobalt ions transits to a higher spin state level upon octahedral tilting, resulting in robust ferromagnetism in ultrathin cobaltites. This work demonstrates a design methodology for fine-tuning the lattice and spin degrees of freedom in correlated quantum heterostructures by exploiting epitaxial geometric engineering.

cond-mat.mtrl-sci↗

arXiv2022

Strain-engineered high-temperature ferromagnetic Oxygen-substituted NaMnF3 from first principles

Using first-principles calculations, we investigated the magnetic, electronic, and structural properties of oxygen-substituted NaMnF3 (NaMnF1.5O1.5) with in-plane biaxial strain. For simplicity, a structure containing an oxygen octahedron is used to explore the underlying physical mechanism. We found that the oxygen octahedron induces a transition from an insulating antiferromagnet to a high-temperature half-metallic ferromagnet. More importantly, the Curie temperature can be significantly enhanced and even might reach room temperature by applying tensile strain. The changing trends of exchange coupling constants with the increasing biaxial tensile strain can be attributed to the cooperative effects of Jahn-Teller distortion and rotation distortion. It is expected that these findings can enrich the versatility of NaMnF3 and make it a promising candidate for spintronic applications.

cond-mat.mtrl-sci↗

arXiv2021

Ferromagnetic Enhancement in LaMnO3 Films with Release and Flexure

A variety of novel phenomena and functionalities emerge from lowering the dimensionality of materials and enriching the degrees of freedom in modulation. In this work, it is found that the saturation magnetization of LaMnO3 (LMO) films is largely enhanced by 56% after releasing from a brand-new phase of tetragonal strontium aluminate buffer layer, and is significantly increased by 92% with bending films to a curvature of 1 mm-1 using a water-assisted direct-transferring method. Meanwhile, the Curie temperature of LMO films has been improved by 13 K. High-resolution spherical aberration-corrected scanning transmission electron microscopy and first-principles calculations unambiguously demonstrate that the enhanced ferromagnetism is attributed to the strengthened Mn-O-Mn super-exchange interactions from the augmented characteristics of the unconventional P21/n structure caused by the out-of-plane lattice shrinking after strain releasing and increased flexure degree of freestanding LMO films. This work paves a way to achieve large-scale and crack-and-wrinkle-free freestanding films of oxides with largely improved functionalities.

cond-mat.mtrl-sci↗

arXiv2021

Room-temperature ferromagnetism at an oxide/nitride interface

Heterointerfaces have led to the discovery of novel electronic and magnetic states because of their strongly entangled electronic degrees of freedom. Single-phase chromium compounds always exhibit antiferromagnetism following the prediction of Goodenough-Kanamori rules. So far, exchange coupling between chromium ions via hetero-anions has not been explored and the associated quantum states is unknown. Here we report the successful epitaxial synthesis and characterizations of chromium oxide (Cr2O3)-chromium nitride (CrN) superlattices. Room-temperature ferromagnetic spin ordering is achieved at the interfaces between these two antiferromagnets, and the magnitude of the effect decays with increasing layer thickness. First-principles calculations indicate that robust ferromagnetic spin interaction between Cr3+ ions via anion-hybridizations across the interface yields the lowest total energy. This work opens the door to fundamental understanding of the unexpected and exceptional properties of oxide-nitride interfaces and provides access to hidden phases at low-dimensional quantum heterostructures.

cond-mat.mtrl-sci↗

arXiv2021

Exchange coupling in synthetic anion-engineered chromia heterostructures

Control of magnetic states by external factors has garnered a mainstream status in spintronic research for designing low power consumption and fast-response information storage and processing devices. Previously, magnetic-cation substitution is the conventional means to induce ferromagnetism in an intrinsic antiferromagnet. Theoretically, the anion-doping is proposed to be another effect means to change magnetic ground states. Here we demonstrate the synthesis of high-quality single-phase chromium oxynitride thin films using in-situ nitrogen doping. Unlike antiferromagnetic monoanionic chromium oxide and nitride phases, chromium oxynitride exhibits a robust ferromagnetic and insulating state, as demonstrated by the combination of multiple magnetization probes and theoretical calculations. With increasing the nitrogen content, the crystal structure of chromium oxynitride transits from trigonal (R3c) to tetragonal (4mm) phase and its saturation magnetization reduces significantly. Furthermore, we achieve a large and controllable exchange bias field in the chromia heterostructures by synthetic anion engineering. This work reflects the anion engineering in functional oxides towards the potential applications in giant magnetoresistance and tunnelling junctions of modern magnetic sensors and read heads.

cond-mat.mtrl-sci↗

arXiv2021

Anisotropic electronic phase transition in CrN epitaxial thin films

Electronic phase transition in strongly correlated materials is extremely sensitive to the dimensionality and crystallographic orientations. Transition metal nitrides (TMNs) are seldom investigated due to the difficulty in fabricating the high-quality and stoichiometric single crystals. In this letter, we report the epitaxial growth and electronic properties of CrN films on different-oriented NdGaO3 (NGO) substrates. Astonishingly, the CrN films grown on (110)-oriented NGO substrates maintain a metallic phase, whereas the CrN films grown on (010)-oriented NGO substrates are semiconducting. We attribute the unconventional electronic transition in the CrN films to the strongly correlation with epitaxial strain. The effective modulation of bandgap by the anisotropic strain triggers the metal-to-insulator transition consequently. This work provides a convenient approach to modify the electronic ground states of functional materials using anisotropic strain and further stimulates the investigations of TMNs.

cond-mat.mtrl-sci↗

arXiv2021

In Operando magnetometry study on the charge storage mechanism of SnCo alloy lithium ion batteries

In view of the long-standing controversy over the reversibility of transition metals in Sn-based alloys as anode for Li-ion batteries, an in situ real-time magnetic monitoring method was used to investigate the evolution of Sn-Co intermetallic during the electrochemical cycling. Sn-Co alloy film anodes with different compositions were prepared via magnetron sputtering without using binders and conductive additives. The magnetic responses showed that the Co particles liberated by Li insertion recombine fully with Sn during the delithiation to reform Sn-Co intermetallic into stannum richer phases Sn7Co3. However, as the Co content increases, it can only recombine partially with Sn into cobalt richer phases Sn3Co7. The unconverted Co particles may form a dense barrier layer and prevent the full reaction of Li with all the Sn in the anode, leading to lower capacities. These critical results shed light on understanding the reaction mechanism of transition metals, and provide valuable insights toward the design of high-performance Sn alloy based anodes.

cond-mat.mtrl-sci↗