arXiv subjects

Changjian Zhou

Publications and source records attributed to Changjian Zhou.

8 recordsLinked to original sources

arXiv2026

TRACE: Spatiotemporal Contact Memory Graph Network Simulator for Granular Dynamics

Learned graph simulators provide an efficient alternative to high-fidelity solvers for granular dynamics. However, granular motion depends strongly on inter-granular contact history, which is difficult to preserve when particle contacts form, break, and rearrange. Existing simulators mainly store temporal information in node features or node-level memory. Here we introduce TRACE, a graph-network simulator that stores interaction history directly on contact edges. Each edge maintains a persistent memory updated by attention-based message passing and a gated recurrent unit, while an edge-identity dictionary preserves this memory as the contact graph changes. A physics-structured decoder predicts inter-granular normal and tangential contact forces, enforces the Coulomb friction limit, and applies equal-and-opposite internal forces. The model is trained with single-step pretraining followed by autoregressive rollout fine-tuning. We evaluate TRACE on 2D and 3D granular column-collapse benchmarks. In both cases, TRACE produces stable, physically consistent long-horizon rollouts, closely reproducing the final deposit geometry and the kinetic energy released during collapse. Compared with graph network simulator (GNS) and node-memory graph neural simulator (NMGNS), TRACE reduces long-rollout position error by 31-62% and final-deposit error by 58-89% across the two benchmarks, while using fewer parameters and maintaining near-zero particle interpenetration. TRACE also achieves 12.2$\times$ and 8.9$\times$ speedups over the material point method (MPM) reference solver in 2D and 3D, respectively. Our code is available at https://github.com/Data-Driven-Computational-Geotechnics/TRACE.

cs.LG↗

arXiv2026

StructureClaw: Traceable LLM Agents and an Executable Benchmark for Structural Engineering Workflows

Addressing a structural-engineering request requires more than a single answer; it requires a chain of interdependent artifacts: interpreted requirements, a computable model, validation records, solver outputs, applicable engineering checks, and a final report. Evaluations centered on question answering or script generation may therefore reward fluent outputs even when the underlying workflow is incomplete, inconsistent, or non-executable. We present StructureClaw, an artifact-centered workbench in which LLM agents operate through governed engineering skills, typed tools, shared artifact state, and local analysis backends, together with StructureClaw-Bench, an executable benchmark of 150 controlled scenarios spanning standard workflows, interactive robustness, and multimodal structural-model reconstruction. Its analyzable standard and multimodal cases require both strict one-to-one structural-model matching and numerical-response agreement with frozen reference responses from the selected analysis engine; interactive cases instead require positive clarification or recovery evidence together with safe non-execution when appropriate. A trial succeeds only when every fixture-required assertion passes. Across nine text-agent configurations, generic-only execution passed the model-artifact check in 87.0% of retained outcomes but achieved only 22.0% E2E Success, whereas automatic StructureClaw reached 82.9%. Interactive and multimodal evaluations further identify semantic state consistency and executable model reconstruction as the dominant remaining bottlenecks. The code and benchmark are available at https://github.com/structureclaw/structureclaw.

cs.SE↗

arXiv2026

PhysGuard: Fisher-Guided Gradient Projection for Sim-to-Real Neural PDE Surrogates

Neural operator models trained on simulation data often lose accuracy when applied to experimental measurements due to the sim-to-real gap. Standard fine-tuning with limited real data can reduce this gap, but it may also damage the core physics-relevant representations learned during pretraining. Although knowledge-preserving adaptation has been widely investigated in vision or language tasks, it remains unclear whether these methods are suitable for neural operators whose architectures and protected knowledge are fundamentally different. Neural operators need to preserve core-scale physical structures rather than semantic or visual features. We propose PhysGuard, a physics-preserving framework for accurate sim-to-real adaptation of neural operators. Specifically, PhysGuard uses the empirical Fisher Information Matrix computed on simulation data to identify physics-critical parameter directions, then restricts fine-tuning updates to directions that do not interfere with them. A layer-wise Gram-matrix formulation makes this efficient for models with millions of parameters, while an adaptive threshold automatically determines the protected subspace size. A spectral probe experiment shows that the dominant Fisher directions are strongly associated with low-frequency output structures. Experiments on benchmark across four neural operator architectures and different physical systems show that PhysGuard performs strongly on most evaluation metrics compared to baselines. The benefits are most evident under severe domain shift, where it reduces low-frequency error by up to 32\% compared to standard fine-tuning while maintaining adaptability. Our code is available at https://github.com/ZhouChaunge/PhysGuard.

cs.LG↗

arXiv2025

Contactless Modulation of Intralayer and Interlayer Excitons in MoS2/WSe2 heterostructures with Acoustoelectric Fields

This work presents a platform that enables surface acoustic wave (SAW) modulation of both intralayer and interlayer excitons in MoS2/WSe2 heterostructures. Harnessing the coupled piezoelectric and strain fields of SAWs, this integrated approach allows for dynamic, precise, and fully contactless control of excitonic properties, a capability essential for the realization of next generation optoelectronic, quantum photonic, and excitonic devices. We identify two distinct modulable interlayer excitons in optical communication bands: IX$_{K\Gamma}$ in the O band (around 1300 nm) and IX$_{K\!-\!K}$ in the S band (around 1500 nm); these two excitons display a robust twist-angle-independent energy splitting of 120 meV, in agreement with density functional theory (DFT) calculations. The type-II band alignment induced by the SAW not only promotes efficient exciton dissociation but also enables direct and tunable modulation of photoluminescence via the formation of confined piezoelectric potential wells. Furthermore, by simultaneously generating in-plane and out-of-plane SAW fields, the platform achieves selective manipulation of intralayer and interlayer excitons, inducing quadratic Stark effects for intralayer excitons and linear Stark effects for interlayer excitons. These findings provide new insights into SAWexciton interactions in van der Waals heterostructures, broaden the operational spectral range, and establish pathways toward on-chip acousto-optic and quantum optoelectronic devices with advanced excitonic functionality.

physics.optics↗

arXiv2025

CMADiff: Cross-Modal Aligned Diffusion for Controllable Protein Generation

AI-assisted protein design has emerged as a critical tool for advancing biotechnology, as deep generative models have demonstrated their reliability in this domain. However, most existing models primarily utilize protein sequence or structural data for training, neglecting the physicochemical properties of proteins.Moreover, they are deficient to control the generation of proteins in intuitive conditions. To address these limitations,we propose CMADiff here, a novel framework that enables controllable protein generation by aligning the physicochemical properties of protein sequences with text-based descriptions through a latent diffusion process. Specifically, CMADiff employs a Conditional Variational Autoencoder (CVAE) to integrate physicochemical features as conditional input, forming a robust latent space that captures biological traits. In this latent space, we apply a conditional diffusion process, which is guided by BioAligner, a contrastive learning-based module that aligns text descriptions with protein features, enabling text-driven control over protein sequence generation. Validated by a series of evaluations including AlphaFold3, the experimental results indicate that CMADiff outperforms protein sequence generation benchmarks and holds strong potential for future applications. The implementation and code are available at https://github.com/HPC-NEAU/PhysChemDiff.

cs.CE↗

arXiv2025

Comprehensive Analog Signal Processing Platform Enabled with Acoustic Charge Transport in Two-dimensional Materials

Two-dimensional Acoustic Charge Transport (2D-ACT) devices, which integrate two dimensional semiconductor field-effect transistor (FET) with high-frequency surface acoustic wave (SAW) device provide a potential compact platform for the processing of analog signals in a wireless, non-contact, low-loss and real-time way. It is expected to be used in long-distance space communication and sensing. However, current investigations into 2D-ACT devices are still limited to the observation of DC acoustoelectric currents, and have yet to achieve real-time electronic signal processing capabilities. In this paper, we have designed a hybrid acoustoelectric platform composed of two-dimensional semiconductor FET and SAW device. The platform is capable of processing DC signals, exhibiting ambipolar transport behavior. The sub-wavelength channel length of the FET within the platform allows for the real-time observation of carrier distribution at a microscopic scale in conjunction with the SAW potential, and facilitating the reproduction and intensity regulation of AC signals. By adjusting the relative phase and intensity ratio of two counter-propagating SAWs, the platform also enables the addition and subtraction of AC signals.

physics.app-ph↗

arXiv2025

Boosting the Self-driven Properties of 2D Photodetectors through Synergistic Asymmetrical Effects

Self-driven photodetectors (SDPDs) transform photon energy into electrical energy without external voltage, which makes them highly advantageous for applications such as low-power communication and imaging systems. Two-dimensional materials (2DMs) provide ideal platforms for SDPDs thanks to their band structures covering ultraviolet to infrared spectrum, strong light absorption efficiencies, and high carrier mobilities. However, the lack of stable doping methods and the complicated 2DMs multilayer stacking techniques pose tremendous difficulties for 2DMs to adopt the same device structures (i.e. PN junctions) as bulk materials, and the resultant self-driven performance remains at a low level. This work reveals how different asymmetrical effects can be combined to synergistically boost self-driven properties based on typical 2D metal-semiconductor-metal (MSM) photodetectors. Using WSe2 as an exemplary 2D material to build MSM photodetectors, the synergistic effect of asymmetrical contact electrodes and asymmetrical contact geometries is theoretically and experimentally demonstrated. The open-circuit voltage (Voc) of the SDPD reaches 0.58V, with a zero-bias responsivity of 5.77 A/W and an on/off ratio of 1.73*10^5. Additionally, our devices demonstrate potential for visible light communication (VLC) in underwater environments. Our results offer a promising and efficient strategy for building SDPDs based on various 2DMs and pave the way toward low-power optoelectronic applications.

physics.optics↗

arXiv2024

RGDA-DDI: Residual graph attention network and dual-attention based framework for drug-drug interaction prediction

Recent studies suggest that drug-drug interaction (DDI) prediction via computational approaches has significant importance for understanding the functions and co-prescriptions of multiple drugs. However, the existing silico DDI prediction methods either ignore the potential interactions among drug-drug pairs (DDPs), or fail to explicitly model and fuse the multi-scale drug feature representations for better prediction. In this study, we propose RGDA-DDI, a residual graph attention network (residual-GAT) and dual-attention based framework for drug-drug interaction prediction. A residual-GAT module is introduced to simultaneously learn multi-scale feature representations from drugs and DDPs. In addition, a dual-attention based feature fusion block is constructed to learn local joint interaction representations. A series of evaluation metrics demonstrate that the RGDA-DDI significantly improved DDI prediction performance on two public benchmark datasets, which provides a new insight into drug development.

q-bio.MN↗