arXiv subjects

Changhun Kim

Publications and source records attributed to Changhun Kim.

17 recordsLinked to original sources

arXiv2026

TRIAGE: Dialectical Reasoning for Explainable Risk Prediction on Irregularly Sampled Medical Time Series with LLMs

Clinical early warning systems built on electronic health records, in which clinical observations are recorded as irregularly sampled medical time series (ISMTS), must deliver both calibrated risk scores for patient triage and interpretable rationales that clinicians can verify. Large Language Models (LLMs) have been explored for this task, yet they collapse graded clinical risk into overconfident binary predictions. This risk polarization undermines both calibration and cross-patient comparability. To address this, we propose TRIAGE, a framework that trains an LLM to generate dialectical reasoning over competing clinical outcomes by eliciting outcome-specific rationales. This dialectical formulation mitigates risk polarization, enabling a single LLM to yield continuous risk scores grounded in explicit clinical reasoning. Evaluated on three ISMTS benchmarks, TRIAGE achieves an average AUPRC improvement of 3.3% and reduces calibration error by 81% compared to the competitive baselines. An LLM-as-a-judge assessment further shows that our rationales surpass post-hoc explanations from the baseline by 20% in clinical reasoning quality. The source code is available at https://github.com/HyeongWon-Jang/TRIAGE .

cs.LG↗

arXiv2026

Soft Equivariance Regularization for Invariant Self-Supervised Learning

Self-supervised learning (SSL) typically learns representations invariant to semantic-preserving augmentations. While effective for recognition, enforcing strong invariance can suppress transformation-dependent structure that is useful for robustness to geometric perturbations and spatially sensitive transfer. A growing body of work, therefore, augments invariance-based SSL with equivariance objectives, but these objectives are often imposed on the same final representation. We empirically observe a trade-off in this coupled setting: pushing equivariance regularization toward deeper layers improves equivariance scores but degrades ImageNet-1k linear evaluation, motivating a layer-decoupled design. Motivated by this trade-off, we propose Soft Equivariance Regularization (SER), a plug-in regularizer that decouples where invariance and equivariance are enforced: we keep the base SSL objective unchanged on the final embedding, while softly encouraging equivariance on an intermediate spatial token map via analytically specified group actions $\rho_g$ applied directly in feature space. SER learns/predicts no per-sample transformation codes/labels, requires no auxiliary transformation-prediction head, and adds only 1.008x training FLOPs. On ImageNet-1k ViT-S/16 pretraining, SER improves MoCo-v3 by +0.84 Top-1 in linear evaluation under a strictly matched 2-view setting and consistently improves DINO and Barlow Twins; under matched view counts, SER achieves the best ImageNet-1k linear-eval Top-1 among the compared invariance+equivariance add-ons. SER further improves ImageNet-C/P by +1.11/+1.22 Top-1 and frozen-backbone COCO detection by +1.7 mAP. Finally, applying the same layer-decoupling recipe to existing invariance+equivariance baselinesimproves their accuracy, suggesting layer decoupling as a general design principle for combining invariance and equivariance.

cs.CV↗

arXiv2026

Impact of Training Dataset Size for ML Load Flow Surrogates

Efficient and accurate load flow calculations are a bedrock of modern power system operation. Classical numerical methods such as the Newton-Raphson algorithm provide highly precise results but are computationally demanding, which limits their applicability in large-scale scenario studies and optimization in time-critical contexts. Research has shown that machine learning approaches can approximate load flow results with high accuracy while substantially reducing computation time. Sample efficiency, i.e., the ability to achieve high accuracy with limited training dataset size, is still insufficiently researched, especially in grids with a fixed topology. This paper presents a systematic investigation of the sample efficiency of a Multilayer Perceptron and two Graph Neural Network variants on a dataset based on a modified IEEE 5-bus system. The results for this grid size show that Graph Neural Networks achieve the lowest losses. However, the availability of large training datasets remains the dominant factor influencing performance compared to architecture choice.

eess.SY↗

arXiv2026

Parameter-Efficient Domain Adaptation of Physics-Informed Self-Attention based GNNs for AC Power Flow Prediction

Accurate AC power flow (AC-PF) prediction under domain shift is critical when models trained on medium-voltage (MV) grids are deployed on high-voltage (HV) networks. Existing physics-informed graph neural network (GNN) solvers typically rely on full fine-tuning for cross-regime transfer, incurring high retraining cost and offering limited control over the stability-plasticity trade-off between target-domain adaptation and source-domain retention. We study parameter-efficient domain adaptation for physics-informed self-attention-based GNNs, encouraging Kirchhoff-consistent behavior via a physics-based loss while restricting adaptation to low-rank updates. Specifically, we apply low-rank adaptation (LoRA) to attention projections with selective unfreezing of the prediction head to regulate adaptation capacity. This design yields a controllable efficiency-accuracy trade-off for physics-constrained inverse estimation under voltage-regime shift. Across multiple grid topologies, the proposed LoRA+PHead adaptation recovers near-full fine-tuning accuracy with a target-domain RMSE gap of $2.6 \times 10^{-4}$ while reducing the number of trainable parameters by $85.46\%$. The physics-based residual remains comparable to full fine-tuning; however, relative to Full FT, LoRA+PHead reduces MV source retention by 4.7 percentage points (17.9% vs. 22.6%) under domain shift, while still enabling parameter-efficient and physically consistent AC-PF estimation.

cs.LG↗

arXiv2026

DRetHTR: Linear-Time Decoder-Only Retentive Network for Handwritten Text Recognition

State-of-the-art handwritten text recognition (HTR) systems commonly use Transformers, whose growing key-value (KV) cache makes decoding slow and memory-intensive. We introduce DRetHTR, a decoder-only model built on Retentive Networks (RetNet). Compared to an equally sized decoder-only Transformer baseline, DRetHTR delivers 1.6-1.9x faster inference with 38-42% less memory usage, without loss of accuracy. By replacing softmax attention with softmax-free retention and injecting multi-scale sequential priors, DRetHTR avoids a growing KV cache: decoding is linear in output length in both time and memory. To recover the local-to-global inductive bias of attention, we propose layer-wise gamma scaling, which progressively enlarges the effective retention horizon in deeper layers. This encourages early layers to model short-range dependencies and later layers to capture broader context, mitigating the flexibility gap introduced by removing softmax. Consequently, DRetHTR achieves best reported test character error rates of 2.26% (IAM-A, en), 1.81% (RIMES, fr), and 3.46% (Bentham, en), and is competitive on READ-2016 (de) with 4.21%. This demonstrates that decoder-only RetNet enables Transformer-level HTR accuracy with substantially improved decoding speed and memory efficiency.

cs.CV↗

arXiv2026

Structure-Aware Set Transformers: Temporal and Variable-Type Attention Biases for Asynchronous Clinical Time Series

Electronic health records (EHR) are irregular, asynchronous multivariate time series. As time-series foundation models increasingly tokenize events rather than discretizing time, the input layout becomes a key design choice. Grids expose time$\times$variable structure but require imputation or missingness masks, risking error or sampling-policy shortcuts. Point-set tokenization avoids discretization but loses within-variable trajectories and time-local cross-variable context (Fig.1). We restore these priors in STructure-AwaRe (STAR) Set Transformer by adding parameter-efficient soft attention biases: a temporal locality penalty $-|\Delta t|/\tau$ with learnable timescales and a variable-type affinity $B_{s_i,s_j}$ from a learned feature-compatibility matrix. We benchmark 10 depth-wise fusion schedules (Fig.2). On three ICU prediction tasks, STAR-Set achieves AUC/APR of 0.7158/0.0026 (CPR), 0.9164/0.2033 (mortality), and 0.8373/0.1258 (vasopressor use), outperforming regular-grid, event-time grid, and prior set baselines. Learned $\tau$ and $B$ provide interpretable summaries of temporal context and variable interactions, offering a practical plug-in for context-informed time-series models.

cs.LG↗

arXiv2025

Delta-XAI: A Unified Framework for Explaining Prediction Changes in Online Time Series Monitoring

Explaining online time series monitoring models is crucial across sensitive domains such as healthcare and finance, where temporal and contextual prediction dynamics underpin critical decisions. While recent XAI methods have improved the explainability of time series models, they mostly analyze each time step independently, overlooking temporal dependencies. This results in further challenges: explaining prediction changes is non-trivial, methods fail to leverage online dynamics, and evaluation remains difficult. To address these challenges, we propose Delta-XAI, which adapts 14 existing XAI methods through a wrapper function and introduces a principled evaluation suite for the online setting, assessing diverse aspects, such as faithfulness, sufficiency, and coherence. Experiments reveal that classical gradient-based methods, such as Integrated Gradients (IG), can outperform recent approaches when adapted for temporal analysis. Building on this, we propose Shifted Window Integrated Gradients (SWING), which incorporates past observations in the integration path to systematically capture temporal dependencies and mitigate out-of-distribution effects. Extensive experiments consistently demonstrate the effectiveness of SWING across diverse settings with respect to diverse metrics. Our code is publicly available at https://github.com/AITRICS/Delta-XAI.

cs.LG↗

arXiv2025

Controlled Comparison of Machine Learning Models for Fault Classification and Localization in Power System Protection

The increasing complexity of modern power systems, driven by the integration of inverter-based and distributed energy resources, challenges the reliability of conventional protection schemes and motivates the use of machine learning for protection tasks. However, published results are often difficult to compare because datasets, sensing assumptions, and decision horizons vary across studies. This paper presents a controlled comparison of machine learning models for fault classification (FC) and fault localization (FL) under identical sensing, timing, and validation conditions on a common electromagnetic transient dataset, using decision windows of 10-50 ms to reflect protection-relevant time scales. For FC, the best-performing nonlinear models achieve F1 scores above 0.98 already at 10 ms, while lower-capacity models degrade at shorter horizons but improve with longer windows, indicating that relevant fault-type information is already present in the earliest transient. For FL, the top-performing models reach a stable localization error of about 10 % of normalized line length across all evaluated horizons, while weaker models form a clearly separated second performance tier. Line-resolved analysis shows that localization accuracy varies across grid segments, indicating topology-dependent difficulty rather than insufficient temporal context alone. These findings provide a controlled reference for comparing machine learning models across two protection tasks with fundamentally different information requirements.

cs.AI↗

arXiv2025

Physics-informed GNN for medium-high voltage AC power flow with edge-aware attention and line search correction operator

Physics-informed graph neural networks (PIGNNs) have emerged as fast AC power-flow solvers that can replace the classic NewtonRaphson (NR) solvers, especially when thousands of scenarios must be evaluated. However, current PIGNNs still need accuracy improvements at parity speed; in particular, the soft constraint on the physics loss is inoperative at inference, which can deter operational adoption. We address this with PIGNN-Attn-LS, combining an edge-aware attention mechanism that explicitly encodes line physics via per-edge biases to form a fully differentiable knownoperator layer inside the computation graph, with a backtracking line-search-based globalized correction operator that restores an operative decrease criterion at inference. Training and testing use a realistic High-/Medium-Voltage scenario generator, with NR used only to construct reference states. On held-out HV cases consisting of 4-32-bus grids, PIGNN-Attn-LS achieves a test RMSE of 0.00033 p.u. in voltage and 0.08 deg in angle, outperforming the PIGNN-MLP baseline by 99.5% and 87.1%, respectively. With streaming micro-batches, it delivers 2-5x faster batched inference than NR on 4-1024-bus grids.

cs.LG↗

arXiv2025

ReviewScore: Misinformed Peer Review Detection with Large Language Models

Peer review serves as a backbone of academic research, but in most AI conferences, the review quality is degrading as the number of submissions explodes. To reliably detect low-quality reviews, we define misinformed review points as either "weaknesses" in a review that contain incorrect premises, or "questions" in a review that can be already answered by the paper. We verify that 15.2% of weaknesses and 26.4% of questions are misinformed and introduce ReviewScore indicating if a review point is misinformed. To evaluate the factuality of each premise of weaknesses, we propose an automated engine that reconstructs every explicit and implicit premise from a weakness. We build a human expert-annotated ReviewScore dataset to check the ability of LLMs to automate ReviewScore evaluation. Then, we measure human-model agreements on ReviewScore using eight current state-of-the-art LLMs. The models show F1 scores of 0.4--0.5 and kappa scores of 0.3--0.4, indicating moderate agreement but also suggesting that fully automating the evaluation remains challenging. A thorough disagreement analysis reveals that most errors are due to models' incorrect reasoning. We also prove that evaluating premise-level factuality shows significantly higher agreements than evaluating weakness-level factuality.

cs.CL↗

arXiv2025

DeltaSHAP: Explaining Prediction Evolutions in Online Patient Monitoring with Shapley Values

This study proposes DeltaSHAP, a novel explainable artificial intelligence (XAI) algorithm specifically designed for online patient monitoring systems. In clinical environments, discovering the causes driving patient risk evolution is critical for timely intervention, yet existing XAI methods fail to address the unique requirements of clinical time series explanation tasks. To this end, DeltaSHAP addresses three key clinical needs: explaining the changes in the consecutive predictions rather than isolated prediction scores, providing both magnitude and direction of feature attributions, and delivering these insights in real time. By adapting Shapley values to temporal settings, our approach accurately captures feature coalition effects. It further attributes prediction changes using only the actually observed feature combinations, making it efficient and practical for time-sensitive clinical applications. We also introduce new evaluation metrics to evaluate the faithfulness of the attributions for online time series, and demonstrate through experiments on online patient monitoring tasks that DeltaSHAP outperforms state-of-the-art XAI methods in both explanation quality as 62% and computational efficiency as 33% time reduction on the MIMIC-III decompensation benchmark. We release our code at https://github.com/AITRICS/DeltaSHAP.

cs.LG↗

arXiv2025

TIMING: Temporality-Aware Integrated Gradients for Time Series Explanation

Recent explainable artificial intelligence (XAI) methods for time series primarily estimate point-wise attribution magnitudes, while overlooking the directional impact on predictions, leading to suboptimal identification of significant points. Our analysis shows that conventional Integrated Gradients (IG) effectively capture critical points with both positive and negative impacts on predictions. However, current evaluation metrics fail to assess this capability, as they inadvertently cancel out opposing feature contributions. To address this limitation, we propose novel evaluation metrics-Cumulative Prediction Difference (CPD) and Cumulative Prediction Preservation (CPP)-to systematically assess whether attribution methods accurately identify significant positive and negative points in time series XAI. Under these metrics, conventional IG outperforms recent counterparts. However, directly applying IG to time series data may lead to suboptimal outcomes, as generated paths ignore temporal relationships and introduce out-of-distribution samples. To overcome these challenges, we introduce TIMING, which enhances IG by incorporating temporal awareness while maintaining its theoretical properties. Extensive experiments on synthetic and real-world time series benchmarks demonstrate that TIMING outperforms existing time series XAI baselines. Our code is available at https://github.com/drumpt/TIMING.

cs.LG↗

arXiv2025

Impact of Data Sparsity on Machine Learning for Fault Detection in Power System Protection

Germany's transition to a renewable energy-based power system is reshaping grid operations, requiring advanced monitoring and control to manage decentralized generation. Machine learning (ML) has emerged as a powerful tool for power system protection, particularly for fault detection (FD) and fault line identification (FLI) in transmission grids. However, ML model reliability depends on data quality and availability. Data sparsity resulting from sensor failures, communication disruptions, or reduced sampling rates poses a challenge to ML-based FD and FLI. Yet, its impact has not been systematically validated prior to this work. In response, we propose a framework to assess the impact of data sparsity on ML-based FD and FLI performance. We simulate realistic data sparsity scenarios, evaluate their impact, derive quantitative insights, and demonstrate the effectiveness of this evaluation strategy by applying it to an existing ML-based framework. Results show the ML model remains robust for FD, maintaining an F1-score of 0.999 $\pm$ 0.000 even after a 50x data reduction. In contrast, FLI is more sensitive, with performance decreasing by 55.61% for missing voltage measurements and 9.73% due to communication failures at critical network points. These findings offer actionable insights for optimizing ML models for real-world grid protection. This enables more efficient FD and supports targeted improvements in FLI.

cs.LG↗

arXiv2024

Stable-TTS: Stable Speaker-Adaptive Text-to-Speech Synthesis via Prosody Prompting

Speaker-adaptive Text-to-Speech (TTS) synthesis has attracted considerable attention due to its broad range of applications, such as personalized voice assistant services. While several approaches have been proposed, they often exhibit high sensitivity to either the quantity or the quality of target speech samples. To address these limitations, we introduce Stable-TTS, a novel speaker-adaptive TTS framework that leverages a small subset of a high-quality pre-training dataset, referred to as prior samples. Specifically, Stable-TTS achieves prosody consistency by leveraging the high-quality prosody of prior samples, while effectively capturing the timbre of the target speaker. Additionally, it employs a prior-preservation loss during fine-tuning to maintain the synthesis ability for prior samples to prevent overfitting on target samples. Extensive experiments demonstrate the effectiveness of Stable-TTS even under limited amounts of and noisy target speech samples.

cs.SD↗

arXiv2024

CloudFixer: Test-Time Adaptation for 3D Point Clouds via Diffusion-Guided Geometric Transformation

3D point clouds captured from real-world sensors frequently encompass noisy points due to various obstacles, such as occlusion, limited resolution, and variations in scale. These challenges hinder the deployment of pre-trained point cloud recognition models trained on clean point clouds, leading to significant performance degradation. While test-time adaptation (TTA) strategies have shown promising results on this issue in the 2D domain, their application to 3D point clouds remains under-explored. Among TTA methods, an input adaptation approach, which directly converts test instances to the source domain using a pre-trained diffusion model, has been proposed in the 2D domain. Despite its robust TTA performance in practical situations, naively adopting this into the 3D domain may be suboptimal due to the neglect of inherent properties of point clouds, and its prohibitive computational cost. Motivated by these limitations, we propose CloudFixer, a test-time input adaptation method tailored for 3D point clouds, employing a pre-trained diffusion model. Specifically, CloudFixer optimizes geometric transformation parameters with carefully designed objectives that leverage the geometric properties of point clouds. We also substantially improve computational efficiency by avoiding backpropagation through the diffusion model and a prohibitive generation process. Furthermore, we propose an online model adaptation strategy by aligning the original model prediction with that of the adapted input. Extensive experiments showcase the superiority of CloudFixer over various TTA baselines, excelling in handling common corruptions and natural distribution shifts across diverse real-world scenarios. Our code is available at https://github.com/shimazing/CloudFixer

cs.CV↗

arXiv2024

AdapTable: Test-Time Adaptation for Tabular Data via Shift-Aware Uncertainty Calibrator and Label Distribution Handler

In real-world scenarios, tabular data often suffer from distribution shifts that threaten the performance of machine learning models. Despite its prevalence and importance, handling distribution shifts in the tabular domain remains underexplored due to the inherent challenges within the tabular data itself. In this sense, test-time adaptation (TTA) offers a promising solution by adapting models to target data without accessing source data, crucial for privacy-sensitive tabular domains. However, existing TTA methods either 1) overlook the nature of tabular distribution shifts, often involving label distribution shifts, or 2) impose architectural constraints on the model, leading to a lack of applicability. To this end, we propose AdapTable, a novel TTA framework for tabular data. AdapTable operates in two stages: 1) calibrating model predictions using a shift-aware uncertainty calibrator, and 2) adjusting these predictions to match the target label distribution with a label distribution handler. We validate the effectiveness of AdapTable through theoretical analysis and extensive experiments on various distribution shift scenarios. Our results demonstrate AdapTable's ability to handle various real-world distribution shifts, achieving up to a 16% improvement on the HELOC dataset.

cs.LG↗

arXiv2023

SGEM: Test-Time Adaptation for Automatic Speech Recognition via Sequential-Level Generalized Entropy Minimization

Automatic speech recognition (ASR) models are frequently exposed to data distribution shifts in many real-world scenarios, leading to erroneous predictions. To tackle this issue, an existing test-time adaptation (TTA) method has recently been proposed to adapt the pre-trained ASR model on unlabeled test instances without source data. Despite decent performance gain, this work relies solely on naive greedy decoding and performs adaptation across timesteps at a frame level, which may not be optimal given the sequential nature of the model output. Motivated by this, we propose a novel TTA framework, dubbed SGEM, for general ASR models. To treat the sequential output, SGEM first exploits beam search to explore candidate output logits and selects the most plausible one. Then, it utilizes generalized entropy minimization and negative sampling as unsupervised objectives to adapt the model. SGEM achieves state-of-the-art performance for three mainstream ASR models under various domain shifts.

eess.AS↗