arXiv Science⌕ Search

arXiv subjects

Cesar Cadena

Publications and source records attributed to Cesar Cadena.

At least 19 recordsLinked to original sources
arXiv2026

SNAP: Semantic Navigation Among Pedestrians

Navigating crowded urban environments requires robots to avoid pedestrians while adhering to social norms such as remaining on sidewalks. Existing approaches typically address either crowd avoidance or semantic path planning in isolation. We propose a reinforcement learning (RL) navigation policy that jointly reasons about semantic terrain and dynamic obstacles from a single semantically annotated bird's-eye-view (BEV) map, without relying on explicit human-state estimation. Our policy outperforms established crowd-navigation and semantic-aware baselines and transfers zero-shot to a legged robot, demonstrating socially compliant navigation in highly dynamic real-world scenarios.

cs.RO↗
arXiv2026

WayTrace: A Map-to-Language-to-Trace Hierarchy for Embodied Urban Navigation

Web services provide walking directions for nearly every city, but following them reliably over long routes remains challenging for autonomous robots. Point-goal navigation policies rely heavily on accurate GNSS, while most vision-language navigation models struggle to execute even short instructions outdoors. We present WayTrace, a hierarchical system that connects web-map directions to robot motion through language. An off-the-shelf orchestrator vision-language model reads the turn-by-turn directions, a satellite map and recent camera images, and issues one atomic language command at a time, such as "cross the road to the left". An onboard trace predictor, trained on over one million automatically labelled samples from street-level images, draws the path for this command in the image, and a reinforcement learning policy tracks it. In long-range simulated missions, WayTrace remains robust to GNSS noise and rarely leaves crosswalks or sidewalks, while point-goal baselines degrade sharply with about ten times more violations. Deployed on a wheeled-legged robot, WayTrace completes real-world missions of up to 1.37 km at about 1.1 m/s through a busy city centre, rural trails and a university campus, handling crosswalks, staircases and construction sites. Project page: https://way-trace.github.io

cs.RO↗
arXiv2026

SAFARI: Semantic- And Frontier-driven Autonomous Risk Inspection

Robotic exploration can reduce human exposure to hazardous environments by autonomously searching unknown areas for objects of interest while constructing a complete, risk-aware map. However, existing autonomous exploration approaches typically prioritize geometric coverage or information gain, without explicitly coupling semantic object detection and the risk associated with operating near potentially hazardous objects. Moreover, many systems have been demonstrated primarily in simulation or controlled environments, leaving limited validation of risk-aware semantic exploration in complex, unstructured field settings. To address this gap, we propose SAFARI, a framework that treats object detection as a native channel of a unified probabilistic map, thereby jointly informing exploration and planning with both geometric and semantic evidence. We evaluated SAFARI in 11 missions across three field sites on a quadruped platform. The framework achieved an average coverage of 98.7% of the accessible mission area, without operator intervention for 97.6% of mission time, and detected objects with characteristic dimensions as small as 15cm. Lastly, through ablation studies and a detailed analysis of system behavior, we show that object-size awareness and safety-aware path planning are crucial for effective hazardous-object search.

cs.RO↗
arXiv2026

DeFM: Learning Foundation Representations from Depth for Robotics

Depth sensors are widely deployed across robotic platforms, and advances in fast, high-fidelity depth simulation have enabled robotic policies trained on depth observations to achieve robust sim-to-real transfer for a wide range of tasks. Despite this, representation learning for depth modality remains underexplored compared to RGB, where large-scale foundation models now define the state of the art. To address this gap, we present DeFM, a self-supervised foundation model trained entirely on depth images for robotic applications. Using a DINO-style self-distillation objective on a curated dataset of 60M depth images, DeFM learns geometric and semantic representations that generalize to diverse environments, tasks, and sensors. To retain metric awareness across multiple scales, we introduce a novel input normalization strategy. We further distill DeFM into compact models suitable for resource-constrained robotic systems. When evaluated on depth-based classification, segmentation, navigation, locomotion, and manipulation benchmarks, DeFM achieves state-of-the-art performance and demonstrates strong generalization from simulation to real-world environments. We release all our pretrained models, which can be adopted off-the-shelf for depth-based robotic learning without task-specific fine-tuning. Webpage: https://de-fm.github.io/

cs.RO↗
arXiv2026

RangeNav: Task-Aligned LiDAR Range-Image Pretraining for Robot Navigation

Autonomous mobile robots operating in dense crowds and cluttered sites require $360^\circ$ perception to react to surrounding hazards. While panoramic LiDAR offers full-surround coverage, learning representations within reinforcement learning (RL) is sample-inefficient under sparse rewards, and existing 3D pretrained point-cloud encoders are too memory-heavy for massively parallel RL simulation. We present RangeNav, a compact (183k parameters) LiDAR range-image encoder pretrained entirely on synthetic data. RangeNav uses anisotropic convolutions and circular padding to handle the extreme aspect ratio and azimuthal seam of range images. We pretrain the network using a navigation-aligned objective combining range reconstruction, semantic segmentation, and bird's-eye-view (BEV) prediction, then freeze it for policy learning. In simulation, adding semantic and BEV supervision increases success rates over a reconstruction-only baseline by an average of 32.03 and 23.73 percentage points (pp) in procedurally generated training and out-of-distribution realistic test environments, respectively. Zero-shot real-world deployments on a Unitree B2-W quadruped demonstrate robust navigation through dense crowds, low-light settings, and construction zones where limited-field-of-view depth policies struggle. Code and models will be open-sourced. Project website: https://rangenav.github.io/.

cs.RO↗
arXiv2026

Solving a Giant Rubik's Cube with a Quadruped Robot

Pedipulating a freestanding articulated object requires controlling its pose and internal configuration while maintaining balance. We demonstrate this capability by autonomously solving a giant Rubik's Cube with a quadruped using only its feet. The task demands repeated precise interactions, since unintended layer motion can invalidate subsequent operations. We develop an onboard RGB-D perception pipeline that estimates the cube's metric pose and its full color state from partial views acquired through locomotion and flipping. A planner converts the computed solve into robot-executable skill sequences. Learned whole-body skills reorient the cube while preserving its layer configuration and turn its layers with one foot pinning the cube as the other pushes. We train these skills using reinforcement learning with privileged observations and distill them into policies that map onboard depth and proprioception to joint targets. The deployed policies tolerate variations in relative robot-cube placement and recover from external disturbances. The system completes three autonomous hardware solves, each about 30 steps over 8-9 minutes. These results show that combining onboard perception with coordinated pedipulation enables a quadruped to complete extended multi-step physical tasks. Additional material can be found at: https://leggedrobotics.github.io/rubik-skills/

cs.RO↗
arXiv2026

LIME: Learning Intent-aware Camera Motion from Egocentric Video

Autonomous robots often need to move their camera before they can act: to inspect an object, reveal an occluded region, or obtain a view that responds to a user's intent. While vision-language navigation translates instructions to base motion and vision-language-action policies map instructions to manipulation actions, vision-language conditioned camera motion remains comparatively underexplored as a first-class action. We formulate vision-language conditioned camera motion generation: given a current RGB observation and a free-form natural-language intent, predict a relative target camera pose for the next observation. The challenge is that useful viewpoint changes depend on latent perceptual intent, ranging from coarse spatial moves to fine-grained inspection or occlusion revealing. To model this structure, we mine multi-intent camera-motion supervision from egocentric video via hindsight labeling, pairing each relative SE(3) target pose with plausible intents and observation-gain descriptions inferred from the reached view. We propose LIME, a vision-language camera-motion generator that combines an autoregressive observation-gain output with a continuous flow-matching pose head. This design lets the model jointly predict what the next view should reveal while representing multi-hypothesis target views. Across viewpoint-prediction experiments and downstream robotic tasks, we show that LIME learns intent-conditioned camera motion from passive egocentric video, turning ordinary human recordings into supervision for a reusable active-perception primitive that supports general-purpose viewpoint selection, manipulation, embodied question answering, and mid-distance navigation.

cs.RO↗
arXiv2026

Learning Agile Perceptive Traversal of Sparse 3D Structures for Humanoids

Traversing sparse 3D structures requires humanoid robots to perceive thin, overhanging geometry while executing agile, accurate whole-body motions. We study this problem through monkey-bar traversal, where the robot must jump to the structure, traverse it through sparse bar interactions, and land safely. For this task, we present a reinforcement-learning-based perceptive control system that operates directly on observations from a head-mounted solid-state lidar. To extract task-relevant geometry from the sparse returns, the policy consumes the raw lidar scan through an attention-based encoder with recurrent memory. This policy is obtained by a phase-scheduled teacher- student pipeline that combines privileged experts for jumping up, brachiating, and jumping down. For transfer to hardware, we model lidar noise, battery-voltage sag, and actuator thermal limits, and equip the humanoid with passive hook end-effectors for robust bar interaction. On hardware, the resulting policy completes the full jump-up->brachiation->jump-down sequence in 14 of 15 trials across three bar configurations and reaches brachiation speeds up to 0.5 m/s. Beyond brachiation, the same perception backbone supports a separately trained policy that ducks beneath thin overhead obstacles with 2 cm cross-sections.

cs.RO↗
arXiv2026

Path-conditioned Reinforcement Learning-based Local Planning for Long-Range Navigation

Long-range navigation is commonly addressed through hierarchical pipelines in which a global planner generates a path, decomposed into waypoints, and followed sequentially by a local planner. These systems are sensitive to global path quality, as inaccurate remote sensing data can result in locally infeasible waypoints, which degrade local execution. At the same time, the limited global context available to the local planner hinders long-range efficiency. To address this issue, we propose a reinforcement learning-based local navigation policy that leverages path information as contextual guidance. The policy is conditioned on reference path observations and trained with a reward function mainly based on goal-reaching objectives, without any explicit path-following reward. Through this implicit conditioning, the policy learns to opportunistically exploit path information while remaining robust to misleading or degraded guidance. Experimental results show that the proposed approach significantly improves navigation efficiency when high-quality paths are available and maintains baseline-level performance when path observations are severely degraded or even non-existent. These properties make the method particularly well-suited for long-range navigation scenarios in which high-level plans are approximate and local execution must remain adaptive to uncertainty.

cs.RO↗
arXiv2026

Tripody: An Overconstrained 3-SPR-like Parallel Robot for High-Reach Construction Tasks

Many ceiling construction tasks still rely on heavy serial manipulators that are difficult to deploy in cluttered interiors, motivating lightweight, field-ready alternatives that reach ceiling height while maintaining millimeter-level accuracy and the stiffness demanded by overhead tool loads. We introduce Tripody, a wheeled 3-DoF parallel robot for high-reach tasks that replaces the base spherical joints of a classical 3-SPR (3 legs; S: base spherical joint; P: actuated prismatic joint; R: end-effector revolute joint) morphology with universal joints, intentionally overconstraining the mechanism; small, distributed elastic deflections absorb the resulting incompatibilities, preserving predominantly translational motion. The 33kg system extends from 1.7m to 3.4m in height, supports a continuous 32kg payload, and offers a modular end-effector interface for ceiling operations. We detail the mechanical design - including custom linear actuators and a kinematic-compatibility analysis - and a control stack for accurate positioning that combines SE(3) state estimation, forward kinematics, and task-space control. In experiments, Tripody exhibits similar in-plane stiffness to a spherical-base variant but substantially higher torsional stiffness - an increase of 67% at 1.7m, 196% at 2.6m, and 454% at 3.4m - while maintaining negligible cross-axis coupling. Closed-loop positioning with a total station converges below 0.6mm across the entire workspace; pure model extrapolation achieves a 95th-percentile error of 2.7mm (max 3.6mm). Finally, we demonstrate task-level ceiling-drilling feasibility in an open-loop study by drilling a 15-hole pattern with 4.5mm maximum relative hole-position error after rigid alignment. These results support overconstrained, compliance-absorbing 3-SPR-like architectures as a practical path to lightweight, high- reach, millimeter-accurate construction robots.

cs.RO↗
arXiv2026

Holistic Fusion: Task- and Setup-Agnostic Robot Localization and State Estimation with Factor Graphs

Seamless operation of mobile robots in challenging environments requires low-latency local motion estimation and accurate global localization. While most sensor-fusion approaches are designed for specific scenarios, this work introduces a flexible open-source solution for task- and setup-agnostic multimodal sensor fusion distinguished by its generality and usability. Holistic Fusion formulates sensor fusion as a combined estimation problem of i) the local and global robot state and ii) a (theoretically unlimited) number of dynamic variables, including automatic alignment of reference frames; this formulation fits countless real-world applications without conceptual modifications, offering a comprehensive solution beyond hard-coded/task-specific approaches. The proposed factor-graph formulation enables direct fusion of an arbitrary number of absolute, local, and landmark measurements expressed with respect to different frames by explicitly including them as states in the optimization and modeling their evolution as random walks. Moreover, local smoothness and consistency receive particular attention to prevent estimation jumps. Holistic Fusion enables low-latency and smooth online state estimation on typical robot hardware while simultaneously providing low-drift global localization at the IMU measurement rate. The efficacy of this released framework [1] is demonstrated in five real-world scenarios on three robotic platforms with distinct task requirements, highlighting the advantages of fusing multiple absolute measurement types [2]. [1] Code: https://github.com/leggedrobotics/holistic_fusion [2] Project: https://leggedrobotics.github.io/holistic_fusion

cs.RO↗
arXiv2026

GrandTour: A Legged Robotics Dataset in the Wild for Multi-Modal Perception and State Estimation

Accurate state estimation and multi-modal perception are prerequisites for autonomous legged robots in complex, large-scale environments. To date, no large-scale public legged-robot dataset captures the real-world conditions needed to develop and benchmark algorithms for legged-robot state estimation, perception, and navigation. To address this, we introduce the GrandTour dataset, a multi-modal legged-robotics dataset collected across challenging outdoor and indoor environments, featuring an ANYbotics ANYmal-D quadruped equipped with the Boxi multi-modal sensor payload. GrandTour spans a broad range of environments and operational scenarios across distinct test sites, ranging from alpine scenery and forests to demolished buildings and urban areas, and covers a wide variation in scale, complexity, illumination, and weather conditions. The dataset provides time-synchronized sensor data from spinning LiDARs, multiple RGB cameras with complementary characteristics, proprioceptive sensors, and stereo depth cameras. Moreover, it includes high-precision ground-truth trajectories from satellite-based RTK-GNSS and a Leica Geosystems total station. This dataset supports research in SLAM, high-precision state estimation, and multi-modal learning, enabling rigorous evaluation and development of new approaches to sensor fusion in legged robotic systems. With its extensive scope, GrandTour represents the largest open-access legged-robotics dataset to date. The dataset is available at https://grand-tour.leggedrobotics.com on HuggingFace (ROS-independent), and in ROS formats, along with tools and demo resources.

cs.RO↗
arXiv2026

BIEVR-LIO: Robust LiDAR-Inertial Odometry through Bump-Image-Enhanced Voxel Maps

Reliable odometry is essential for mobile robots as they increasingly enter more challenging environments, which often contain little information to constrain point cloud registration, resulting in degraded LiDAR-Inertial Odometry (LIO) accuracy or even divergence. To address this, we present BIEVR-LIO, a novel approach designed specifically to exploit subtle variations in the available geometry for improved robustness. We propose a high-resolution map representation that stores surfaces as voxel-wise oriented height images. This representation can directly be used for registration without the calculation of intermediate geometric primitives while still supporting efficient updates. Since informative geometry is often sparsely distributed in the environment, we further propose a map-informed point sampling strategy to focus registration on geometrically informative regions, improving robustness in uninformative environments while reducing computational cost compared to global high-resolution sampling. Experiments across multiple sensors, platforms, and environments demonstrate state-of-the-art performance in well-constrained scenes and substantial improvements in challenging scenarios where baseline methods diverge. Additionally, we demonstrate that the fine-grained geometry captured by BIEVR-LIO can be used for downstream tasks such as elevation mapping for robot locomotion.

cs.RO↗
arXiv2026

Robots Need More than VLA and World Models

Generalist robot intelligence is often framed as a policy-scaling problem: collect more robot demonstrations, train larger Vision-Language-Action (VLA) models, and expect broader generalisation. In this position paper, we argue that this framing is incomplete. The central bottleneck is not only policy learning, but the absence of mechanisms that convert the world's abundant unstructured behavioural data into grounded robot supervision. Human motion, internet video, simulation rollouts, and interactive demonstrations contain rich information about tasks, goals, contacts, failures, and physical constraints, yet most of this information is not directly usable by robot policies because it lacks embodiment-specific action labels, task semantics, and reward structure. We identify four missing components for the next generation of robotics: data interfaces for autolabelling unstructured behaviour, embodiment interfaces for retargeting human motion to robot actions, world-model interfaces for physics-grounded 3D reasoning, and reward interfaces for inferring task progress and success from video and language. We survey recent progress in robot foundation models, cross-embodiment datasets, learning from video, world models, and reward modelling, and propose a research agenda for building robotics systems that can learn not only from robot demonstrations, but from the broader physical world.

cs.RO↗
arXiv2026

Event-based Civil Infrastructure Visual Defect Detection: ev-CIVIL Dataset and Benchmark

Small unmanned aerial vehicle (UAV)-based visual inspections are a more efficient alternative to manual methods for examining civil structural defects, offering safe access to hazardous areas and significant cost savings by reducing labor requirements. However, traditional frame-based cameras, widely used in UAV-based inspections, often struggle to capture defects under low or dynamic lighting conditions. In contrast, dynamic vision sensors (DVS), or event-based cameras, excel in such scenarios by minimizing motion blur, enhancing power efficiency, and maintaining high-quality imaging across diverse lighting conditions without saturation or information loss. Despite these advantages, existing research lacks studies exploring the feasibility of using DVS for detecting civil structural defects. Moreover, there is no dedicated event-based dataset tailored for this purpose. Addressing this gap, this study introduces the first event-based civil infrastructure defect detection dataset, capturing defective surfaces as a spatio-temporal event stream using DVS. In addition to event-based data, the dataset includes grayscale intensity image frames captured simultaneously using an active pixel sensor (APS). Both data types were collected using the DAVIS346 camera, which integrates DVS and APS sensors. The dataset focuses on two types of defects: cracks and spalling, and includes data from both field and laboratory environments. The field dataset comprises 318 recording sequences, documenting 458 distinct cracks and 121 distinct spalling instances. The laboratory dataset includes 362 recording sequences, covering 220 distinct cracks and 308 spalling instances. We evaluated the dataset using four real-time object detection models.The results demonstrate the applicability of DVS cameras for robust detection of civil infrastructure defects under challenging lighting conditions.

cs.CV↗
arXiv2026

Real-Time Frame- and Event-based Object Detection with Spiking Neural Networks on Edge Neuromorphic Hardware: Design, Deployment and Benchmark

Real-time object detection on energy-constrained platforms is critical for applications such as UAV-based inspection, autonomous navigation, and mobile robotics. Spiking neural networks (SNNs) on neuromorphic hardware are believed to be significantly more energy-efficient than conventional artificial neural networks (ANNs). In this work, we present a comprehensive methodology for designing general SNN detection architectures targeting neuromorphic platforms, along with the engineering adaptations required to deploy them on the state-of-the-art Neuromorphic processor, Intel Loihi 2. We benchmark SNN-based object detection on Loihi 2 using both frame-based and event-based datasets, comparing performance with ANN-based detection on the NVIDIA Jetson Orin Nano, NVIDIA Jetson Nano B01, and the Apple M2 CPU. Our results show that SNNs on Loihi 2 can perform real-time detection while achieving the lowest per-inference dynamic energy among all platforms. Also, Loihi 2 outperforms the other platforms in terms of power consumption, though ANNs on Jetson Orin Nano achieve higher inference rates. Furthermore, our ANN-to-SNN distillation-aware training enables SNNs to recover 87-100% of the detection accuracy of their ANN counterparts while maintaining lower inference latency; without distillation, SNNs exhibit an 11-27% accuracy drop. These results highlight the potential of neuromorphic systems for energy-efficient, real-time object detection at the edge.

cs.CV↗
arXiv2026

An Efficient Beam Search Algorithm for Active Perception in Mobile Robotics

Active perception is a fundamental problem in autonomous robotics in which the robot must decide where to move and what to sense in order to obtain the most informative observations for accomplishing its mission. Existing approaches either solve a computationally expensive traveling salesman problem over heuristically selected informative nodes, or adopt a more efficient but overly constrained shortest path tree formulation. To address these limitations, we explore beam search algorithms as scalable alternatives. While the standard beam search provides scalability by preserving the top-B paths at each depth level, it is prone to local optima and exhibits parameter sensitivity. Our first contribution is a node-wise beam search (NBS) algorithm, which maintains top-B candidates per node to enable more effective exploration of the solution space. Systematic benchmarking on graphs shows that NBS consistently outperforms other baselines and maintains strong performance even at low beam widths. As a second contribution, we integrate the concept of frontiers into the path selection criterion, introducing the expected gain metric, which better balances exploration and exploitation compared to existing alternatives. Our third contribution proposes the rapidly-exploring random annulus graph (RRAG), a novel graph construction method that preserves full orientation sampling and ensures connectivity in cluttered environments through a fallback local sampling-based planner. Extensive experiments demonstrate that NBS combined with RRAG achieves the highest performance across all three representative active perception tasks, outperforming state-of-the-art algorithms by at least 20% in one or more tasks. We further validate the approach on real robotic platforms in different scenarios.

cs.RO↗
arXiv2026

DigiForest: Digital Analytics and Robotics for Sustainable Forestry

Covering one third of Earth's land surface, forests are vital to global biodiversity, climate regulation, and human well-being. In Europe, forests and woodlands reach approximately 40% of land area, and the forestry sector is central to achieving the EU's climate neutrality and biodiversity goals; these emphasize sustainable forest management, increased use of long-lived wood products, and resilient forest ecosystems. To meet these goals and properly address their inherent challenges, current practices require further innovation. This chapter introduces DigiForest, a novel, large-scale precision forestry approach leveraging digital technologies and autonomous robotics. DigiForest is structured around four main components: (1) autonomous, heterogeneous mobile robots (aerial, legged, and marsupial) for tree-level data collection; (2) automated extraction of tree traits to build forest inventories; (3) a Decision Support System (DSS) for forecasting forest growth and supporting decision-making; and (4) low-impact selective logging using purpose-built autonomous harvesters. These technologies have been extensively validated in real-world conditions in several locations, including forests in Finland, the UK, and Switzerland.

cs.RO↗