arXiv subjects

C. Kim

Publications and source records attributed to C. Kim.

At least 19 recordsLinked to original sources

arXiv2026

Surface Interactions in Photon Monte Carlo Simulations

We implement a comprehensive simulation of photon surface interactions using a Monte Carlo approach. This is effective in simulating the interaction of light with telescope mirrors and lenses. We use a full electromagnetic solution to simulate the wavelength and angular dependence at surfaces. This includes bare interfaces, monolayer interfaces, protected layer coatings, and multilayer coatings. We handle special cases when multilayer data is incomplete or when there is photo-conversion in the interface as with sensors. We implement interactions with surface micro-roughness and predict the corresponding angular distribution using a Monte Carlo implementation of the Harvey-Shack scatter theory for a microroughness power spectrum. Finally, we simulate surface interaction with contamination from dust or condensation using Mie scattering applied efficiently to individual contaminants. The combination of these implementations can efficiently simulate rough to polished surfaces of arbitrary materials that are fully cleaned or dusty. The observational consequences includes complex wavelength and spatial-dependent photometric errors, the dominant effect of the wings of point-spread-functions, dust rings, and wavelength and angle-dependent throughput losses. We find agreement with the point-spread-function wings of WIYN ODI observations of bright stars and properties of dust rings, and demonstrate the ability to disentangle mirror microroughness from the turbulence PSF patterns. The comprehensive numerical implementation of surface interactions has wide applicability in non-astronomical applications as well.

astro-ph.IM↗

arXiv2025

Non-equilibrium Dynamics of Two-level Systems directly after Cryogenic Alternating Bias

Two-level systems (TLSs) are tunneling states commonly found in amorphous materials that electrically couple to qubits, resonators, and vibrational modes in materials, leading to energy loss in those systems. Recent studies suggest that applying a large alternating electric field changes the oxide structure, potentially improving the performance of qubits and resonators. In this study, we probe the effect of alternating bias at cryogenic temperatures on TLS dynamics within amorphous oxide parallel-plate capacitors operating in the strongly coupled regime. We bias the TLSs in the capacitors using an electric field. This allows us to spectroscopically image TLSs and extract their densities and dipole moments. When an in-situ alternating bias is applied, the steady-state spectra from the standard TLS model disappear. Post-alternating bias TLS spectroscopy reveals transient behavior, in which the TLS frequency fluctuates on the order of minutes. Thermal cycling above 10 K reverses these effects, restoring the TLS spectrum to its original state, indicating a reversible mechanism. Importantly, the intrinsic loss tangent of the LC oscillator remains unchanged before and after the application of the alternating bias. We propose that the disappearance of the steady-state spectrum are caused by non-equilibrium energy build up from strain in the oxide film introduced by the pulsed voltage bias sequence. Understanding this non-equilibrium energy could inform future models of time-dependent TLS dynamics.

quant-ph↗

arXiv2025

Decadal upgrade strategy for KAGRA toward post-O5 gravitational-wave astronomy

The KAGRA Collaboration has investigated a ten-year upgrade strategy for the KAGRA gravitational wave detector, considering a total of 14 upgrade options that vary in mirror mass, quantum noise reduction techniques, and the quality of cryogenic suspensions. We evaluated the scientific potential of these configurations with a focus on key targets such as parameter estimation of compact binary coalescences, binary neutron star post-merger signals, and continuous gravitational waves. Rather than aiming to improve all science cases uniformly, we prioritized those most sensitive to the detector configuration. Technical feasibility was assessed based on required hardware developments, associated R\&D efforts, cost, and risk. Our study finds that a high-frequency upgrade plan that enhances sensitivity over a broad frequency range above ~200 Hz offers the best balance between scientific return and technical feasibility. Such an upgrade would enable sky localization of binary neutron star mergers at 100 Mpc to better than 0.5 deg$^2$ in a LIGO-Virgo-KAGRA network, and improve the measurement precision of tidal deformability parameter by approximately 10% at median, compared to a network without KAGRA.

gr-qc↗

arXiv2025

Experimental Study of Rare Kaon Decays at J-PARC with KOTO and KOTO II

The rare kaon decay $K_L\to\pi^0\nu\bar{\nu}$ is extremely sensitive to new physics, because the contribution to this decay in the Standard Model (SM) is highly suppressed and known very accurately; the branching ratio is $3\times 10^{-11}$ in the SM with a theoretical uncertainty of just 2%. The measurement of this branching ratio could provide essential new information about the flavor structure of the quark sector from the $s\to d$ transition. The decay is being searched for in the KOTO experiment at J-PARC, which has obtained the current best upper limit on the branching ratio of $2.2\times 10^{-9}$; a sensitivity to branching ratios below $10^{-10}$ is achievable by the end of the decade. A next-generation experiment at J-PARC, KOTO II, was proposed in 2024 with 82 members worldwide, including significant contributions from European members. The goal of KOTO II is to measure the $K_L\to\pi^0\nu\bar{\nu}$ branching ratio with sensitivity below $10^{-12}$ in the 2030s. Discovery of the decay with $5\sigma$ significance is achievable at the SM value of the branching ratio. An indication of new physics with a significance of 90% is possible if the observed branching ratio differs by 40% from the SM value. Another important goal of KOTO II is to measure the branching ratio of the unobserved $K_L\to \pi^0e^+e^-$ decay, which can give an input to flavor structures of new physics. Other rare $K_L$ decays and hidden-sector particles are also in the scope of the study. After 2026, KOTO will be the only dedicated rare kaon decay experiment in the world, and KOTO II is the only future rare kaon decay project currently proposed. We would like to lead a global initiative for the experimental study of rare kaon decays, with significant contributions and support from the European community.

hep-ex↗

arXiv2025

Anisotropic Strain Relaxation-Induced Directional Ultrafast Carrier Dynamics in RuO2 Films

Ultrafast light-matter interactions inspire potential functionalities in picosecond optoelectronic applications. However, achieving directional carrier dynamics in metals remains challenging due to strong carrier scattering within a multiband environment, typically expected to isotropic carrier relaxation. In this study, we demonstrate epitaxial RuO2/TiO2 (110) heterostructures grown by hybrid molecular beam epitaxy to engineer polarization-selectivity of ultrafast light-matter interactions via anisotropic strain engineering. Combining spectroscopic ellipsometry, X-ray absorption spectroscopy, and optical pump-probe spectroscopy, we revealed the strong anisotropic transient optoelectronic response of strain-engineered RuO2/TiO2 (110) heterostructures along both in-plane [001] and [1-10] crystallographic directions. Theoretical analysis identifies strain-induced modifications in band nesting as the underlying mechanism for enhanced anisotropic carrier relaxation. These findings establish epitaxial strain engineering as a powerful tool for tuning anisotropic optoelectronic responses in metallic systems, paving the way for next-generation polarization-sensitive ultrafast optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Performance of the prototype beam drift chamber for LAMPS at RAON with proton and Carbon-12 beams

Beam Drift Chamber (BDC) is designed to reconstruct the trajectories of incident rare isotope beams provided by RAON (Rare isotope Accelerator complex for ON-line experiments) into the experimental target of LAMPS (Large Acceptance Multi-Purpose Spectrometer). To conduct the performance test of the BDC, the prototype BDC (pBDC) is manufactured and evaluated with the high energy ion beams from HIMAC (Heavy Ion Medical Accelerator in Chiba) facility in Japan. Two kinds of ion beams, 100 MeV proton, and 200 MeV/u $^{12}$C, have been utilized for this evaluation, and the track reconstruction efficiency and position resolution have been measured as the function of applied high voltage. This paper introduces the construction details and presents the track reconstruction efficiency and position resolution of pBDC.

physics.ins-det↗

arXiv2024

Kinetic Inductance and nonlinearity of MgB2 Films at 4K

We report on the fabrication and characterization of superconducting magnesium diboride (MgB$_2$) thin films intended for quantum-limited devices based non-linear kinetic inductance (NLKI) such as parametric amplifiers with either elevated operating temperatures or expanded frequency ranges. In order to characterize the MgB$_2$ material properties, we have fabricated coplanar waveguide (CPW) transmission lines and microwave resonators using $\approx$ 40 nm thick MgB$_2$ films with a measured kinetic inductance of $\sim$ 5.5 pH/$\square$ and internal quality factors, $Q_i \approx 3 \times 10^4$ at 4.2 K. We measure the NLKI in MgB$_2$ by applying a DC bias to a 6 cm long by 4 $\mu$m wide CPW transmission line, and measuring the resulting phase delay caused by the current dependent NLKI. We also measure the current dependent NLKI through CPW resonators that shift down in frequency with increased power applied through the CPW feedline. Using these measurements, we calculate the characteristic non-linear current parameter, $I_*$, for multiple CPW geometries. We find values for corresponding current density, $J_* = 12-22$~MA/cm$^2$ and a ratio of the critical current to the non-linear current parameter, $I_C/I_* = 0.14-0.26$, similar to or higher than values for other superconductors such as NbTiN and TiN.

cond-mat.supr-con↗

arXiv2023

Particle Identification at VAMOS++ with Machine Learning Techniques

Multi-nucleon transfer reaction between 136Xe beam and 198Pt target was performed using the VAMOS++ spectrometer at GANIL to study the structure of n-rich nuclei around N=126. Unambiguous charge state identification was obtained by combining two supervised machine learning methods, deep neural network (DNN) and positional correction using a gradient-boosting decision tree (GBDT). The new method reduced the complexity of the kinetic energy calibration and outperformed the conventional method, improving the charge state resolution by 8%

physics.ins-det↗

arXiv2023

The High Energy X-ray Probe (HEX-P): Magnetars and Other Isolated Neutron Stars

The hard X-ray emission from magnetars and other isolated neutron stars remains under-explored. An instrument with higher sensitivity to hard X-rays is critical to understanding the physics of neutron star magnetospheres and also the relationship between magnetars and Fast Radio Bursts (FRBs). High sensitivity to hard X-rays is required to determine the number of magnetars with hard X-ray tails, and to track transient non-thermal emission from these sources for years post-outburst. This sensitivity would also enable previously impossible studies of the faint non-thermal emission from middle-aged rotation-powered pulsars (RPPs), and detailed phase-resolved spectroscopic studies of younger, bright RPPs. The High Energy X-ray Probe (HEX-P) is a probe-class mission concept that will combine high spatial resolution X-ray imaging ($<5$ arcsec half-power diameter (HPD) at 0.2--25 keV) and broad spectral coverage (0.2--80 keV) with a sensitivity superior to current facilities (including XMM-Newton and NuSTAR). HEX-P has the required timing resolution to perform follow-up observations of sources identified by other facilities and positively identify candidate pulsating neutron stars. Here we discuss how HEX-P is ideally suited to address important questions about the physics of magnetars and other isolated neutron stars.

astro-ph.HE↗

arXiv2023

3D atomic structure from a single XFEL pulse

X-ray Free Electron Lasers (XFEL) are the most advanced pulsed x-ray sources. Their extraordinary pulse parameters promise unique applications. Indeed, several new methods have been developed at XFEL-s. However, no methods are known, which would allow ab initio atomic level structure determination using only a single XFEL pulse. Here, we present experimental results, demonstrating the determination of the 3D atomic structure from data obtained during a single 25 fs XFEL pulse. Parallel measurement of hundreds of Bragg reflections was done by collecting Kossel line patterns of GaAs and GaP. With these measurements, we reached the ultimate temporal limit of the x-ray structure solution possible today. These measurements open the way for studying non-repeatable fast processes and structural transformations in crystals for example measuring the atomic structure of matter at extremely non-ambient conditions or transient structures formed in irreversible physical, chemical, or biological processes. It would also facilitate time resolved pump-probe structural studies making them significantly shorter than traditional serial crystallography.

cond-mat.mtrl-sci↗

arXiv2023

Andreev probing of Cooper-pair flying qubit

We propose a nanomechanical device which can actuate and probe a flying qubit that can be used to facilitate quantum information transfer over a long distance. The flying qubit is formed by a movable Cooper pair box (CPB) consisting of a superconducting dot and a bulk superconductor which are entangled by removing the Coulomb blockade of Cooper pair tunneling electrostatically. We suggest that flying qubit states formed on movable CPB can be observed in electron transport to a normal electrode via Andreev reflections. The charge transfer due to periodic mechanical motion of CPB leads to nonzero current at zero voltage and its coherence can be identified through oscillatory dependence of the current on a gate voltage.

cond-mat.mes-hall↗

arXiv2023

Spin-phonon interactions and magnetoelectric coupling in Co$_4$$B_2$O$_9$ ($B$ = Nb, Ta)

In order to explore the consequences of spin-orbit coupling on spin-phonon interactions in a set of chemically-similar mixed metal oxides, we measured the infrared vibrational properties of Co$_4B_2$O$_9$ ($B$ = Nb, Ta) as a function of temperature and compared our findings with lattice dynamics calculations and several different models of spin-phonon coupling. Frequency vs. temperature trends for the Co$^{2+}$ shearing mode near 150 cm$^{-1}$ reveal significant shifts across the magnetic ordering temperature that are especially large in relative terms. Bringing these results together and accounting for noncollinearity, we obtain spin-phonon coupling constants of -3.4 and -4.3 cm$^{-1}$ for Co$_4$Nb$_2$O$_9$ and the Ta analog, respectively. Analysis reveals that these coupling constants derive from interlayer (rather than intralayer) exchange interactions and that the interlayer interactions contain competing antiferromagnetic and ferromagnetic contributions. At the same time, beyond-Heisenberg terms are minimized due to fortuitous symmetry considerations, different than most other 4$d$- and 5$d$-containing oxides. Comparison with other contemporary oxides shows that spin-phonon coupling in this family of materials is among the strongest ever reported, suggesting an origin for magnetoelectric coupling.

cond-mat.mtrl-sci↗

arXiv2023

Optimizing the magnon-phonon cooperativity in planar geometries

Optimizing the cooperativity between two distinct particles is an important feature of quantum information processing. Of particular interest is the coupling between spin and phonon, which allows for integrated long range communication between gates operating at GHz frequency. Using local light scattering, we show that, in magnetic planar geometries, this attribute can be tuned by adjusting the orientation and strength of an external magnetic field. The coupling strength is enhanced by about a factor of 2 for the out-of-plane magnetized geometry where the Kittel mode is coupled to circularly polarized phonons, compared to the in-plane one where it couples to linearly polarized phonons. We also show that the overlap between magnon and phonon is maximized by matching the Kittel frequency with an acoustic resonance that satisfies the half-wave plate condition across the magnetic film thickness. Taking the frequency dependence of the damping into account, a maximum cooperativity of about 6 is reached in garnets for the normal configuration near 5.5 GHz.

physics.app-ph↗

arXiv2022

Spin wave spectra of single crystal CoPS$_3$

The spin waves in single crystals of the layered van der Waals antiferromagnet CoPS$_3$ have been measured using inelastic neutron scattering. The data show four distinct spin wave branches with large ($\gtrsim 14$ meV) energy gaps at the Brillouin zone center indicating significant anisotropy. The data were modelled using linear spin wave theory derived from a Heisenberg Hamiltonian. Exchange interactions up to the third nearest-neighbour in the layered planes were required to fit the data with ferromagnetic $J_1 = -1.37$ meV between first neighbours, antiferromagnetic $J_3 = 3.0$ meV between third neighbours, and a very small $J_2 = 0.09$ meV between second neighbours. A biaxial single-ion anisotropy was required, with a collinear term $D^x = -0.77$ meV for the axis parallel to the aligned moment direction and a coplanar term $D^z=6.07$ meV for an axis approximately normal to the layered crystal planes.

cond-mat.mtrl-sci↗

arXiv2022

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc↗

arXiv2022

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM↗

arXiv2022

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-P\'{e}rot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM↗

arXiv2022

Key points in the determination of the interfacial Dzyaloshinskii-Moriya interaction from asymmetric bubble domain expansion

Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity profile when the DW roughness is high. Our results demonstrate that the DW roughness and the interface roughness of the sample layers are correlated. Furthermore, we give guidance on how to obtain reliable results for the DMI value with this popular method. A comparison of the results with Brillouin light scattering (BLS) measurements on the same samples shows that the BLS approach often results in higher measured values of DMI.

cond-mat.mes-hall↗