arXiv subjects

C. Bell

Publications and source records attributed to C. Bell.

At least 19 recordsLinked to original sources

arXiv2026

The Cryogenic System of DMRadio-50L

The DMRadio-50L experiment is designed to search for axion dark matter in the 5 kHz - 5 MHz frequency range using a lumped-element LC resonator and a toroidal magnet and to serve as a testbed for quantum sensors. This paper describes the custom cryogenic system developed to meet the stringent requirements of the experiment within a standard laboratory environment. The system is designed to cool a 200 kg detector assembly to temperatures as low as 50 mK while providing sufficient cooling power at multiple temperature stages. We present the conceptual design, technical implementation, and measured performance of the hybrid cryogenic system, which combines a horizontal dilution refrigerator with a large vertical payload cryostat.

physics.ins-det↗

arXiv2026

DMRadio-Core: A new approach for GUT-scale axion searches

Searches for QCD axions with masses in the neV/$c^2$ mass range are strongly motivated by new physics at the GUT scale and by well-motivated pre-inflationary axion symmetry breaking scales. This parameter space is challenging to probe due to the small axion-photon couplings, which typically require large, high-field magnets with substantial stored energy. In this paper, we propose a new experimental geometry based on a narrow-bore, segmented solenoid that optimizes the collection of the axion-induced signal using LC resonators outside the high-field region of the magnet bore. This alternative optimization significantly reduces the required stored magnetic energy while preserving sensitivity, enabling a near-term experiment in the 30-200 MHz (120-830 neV/$c^2$) range, with a cost-effective, staged scaling to a GUT-scale experiment in the 100 kHz-30 MHz (0.4-120 neV/$c^2$) range.

hep-ex↗

arXiv2025

Noise limits for dc SQUID readout of high-$Q$ resonators below 300 MHz

We present the limits on noise for the readout of cryogenic high-$Q$ resonators using dc Superconducting Quantum Interference Devices (SQUIDs) below 300 MHz. This analysis uses realized first-stage SQUIDs (previously published), whose performance is well described by Tesche-Clarke (TC) theory, coupled directly to the resonators. We also present data from a prototype second-stage dc SQUID array designed to couple to this first-stage SQUID as a follow-on amplifier with high system bandwidth. This analysis is the first full consideration of dc SQUID noise performance referred to a high-$Q$ resonator over this frequency range, and is presented relative to the standard quantum limit. We include imprecision, backaction, and backaction-imprecision noise correlations from TC theory, the noise contributed by the second-stage SQUIDs, wiring, and preamplifiers, and optimizations for both on-resonance measurements and off-resonance scan sensitivity. This architecture has modern relevance due to the increased interest in axion searches and the requirements of the DMRadio-m$^3$ axion search, which will use dc SQUIDs in this frequency range.

quant-ph↗

arXiv2025

United States Muon Collider Community White Paper for the European Strategy for Particle Physics Update

This document is being submitted to the 2024-2026 European Strategy for Particle Physics Update (ESPPU) process on behalf of the US Muon Collider community, with its preparation coordinated by the interim US Muon Collider Coordination Group. The US Muon Collider Community comprises a few hundred American scientists. The purpose of the document is to inform ESPPU about the US plans for Muon Collider research and development (R&D), explain how these efforts align with the broader international R&D initiatives, and present the US community vision for the future realization of this transformative project.

hep-ex↗

arXiv2024

Kinetic Inductance and nonlinearity of MgB2 Films at 4K

We report on the fabrication and characterization of superconducting magnesium diboride (MgB$_2$) thin films intended for quantum-limited devices based non-linear kinetic inductance (NLKI) such as parametric amplifiers with either elevated operating temperatures or expanded frequency ranges. In order to characterize the MgB$_2$ material properties, we have fabricated coplanar waveguide (CPW) transmission lines and microwave resonators using $\approx$ 40 nm thick MgB$_2$ films with a measured kinetic inductance of $\sim$ 5.5 pH/$\square$ and internal quality factors, $Q_i \approx 3 \times 10^4$ at 4.2 K. We measure the NLKI in MgB$_2$ by applying a DC bias to a 6 cm long by 4 $\mu$m wide CPW transmission line, and measuring the resulting phase delay caused by the current dependent NLKI. We also measure the current dependent NLKI through CPW resonators that shift down in frequency with increased power applied through the CPW feedline. Using these measurements, we calculate the characteristic non-linear current parameter, $I_*$, for multiple CPW geometries. We find values for corresponding current density, $J_* = 12-22$~MA/cm$^2$ and a ratio of the critical current to the non-linear current parameter, $I_C/I_* = 0.14-0.26$, similar to or higher than values for other superconductors such as NbTiN and TiN.

cond-mat.supr-con↗

arXiv2024

Materials for Quantum Technologies: a Roadmap for Spin and Topology

In this Perspective article, we explore some of the promising spin and topology material platforms (e.g. spins in semi- and superconductors, skyrmionic, topological and 2D materials) being developed for such quantum components as qubits, superconducting memories, sensing, and metrological standards and discuss their figures of merit. Spin- and topology-related quantum phenomena have several advantages, including high coherence time, topological protection and stability, low error rate, relative ease of engineering and control, simple initiation and read-out. However, the relevant technologies are at different stages of research and development, and here we discuss their state-of-the-art, potential applications, challenges and solutions.

cond-mat.mes-hall↗

arXiv2023

Structural properties of epitaxial {\alpha}-U thin films on Ti, Zr, W and Nb

Thin layers of orthorhombic uranium ({\alpha}-U) have been grown onto buffered sapphire substrates by d.c. magnetron sputtering, resulting in the discovery of new epitaxial matches to Ti(00.1) and Zr(00.1) surfaces. These systems have been characterised by X-ray diffraction and reflectivity and the optimal deposition temperatures have been determined. More advanced structural characterisation of the known Nb(110) and W(110) buffered {\alpha}-U systems has also been carried out, showing that past reports of the domain structures of the U layers are incomplete. The ability of this low symmetry structure to form crystalline matches across a range of crystallographic templates highlights the complexity of U metal epitaxy and points naturally toward studies of the low temperature electronic properties of {\alpha}-U as a function of epitaxial strain.

cond-mat.mtrl-sci↗

arXiv2023

A review of uranium-based thin films

Thin films based on silicon and transition-metal elements dominate the semiconducting industry and are ubiquitous in all modern devices. Films have also been produced in the rare-earth series of elements for both research and specialized applications. Thin films of uranium and uranium dioxide were fabricated in the 1960s and 1970s, but there was little sustained effort until the early 2000s. Significant programmes started at Oxford University (transferring to Bristol University in 2011), and Los Alamos National Laboratory (LANL) in New Mexico, USA. In this review we cover the work that has been published over the last ~20 years with these materials. Important breakthroughs occurred with the fabrication of epitaxial thin films of initially uranium metal and UO2, but more recently of many other uranium compounds and alloys. These have led to a number of different experiments that are reviewed, as well as some important trends. The interaction with the substrate leads to differing strain and hence changes in properties. An important advantage is that epitaxial films can often be made of materials that are impossible to produce as bulk single crystals. Examples are U3O8, U2N3 and alloys of U-Mo, which form in a modified bcc structure. Epitaxial films may also be used in applied research. They represent excellent surfaces, and it is at the surfaces that most of the important reactions occur in the nuclear fuel cycle. For example, the fuel-cladding interactions, and the dissolution of fuel by water in the long-term storage of spent fuel. To conclude, we discuss possible future prospects, examples include bilayers containing uranium for spintronics, and superlattices that could be used in heterostructures. Such applications will require a more detailed knowledge of the interface interactions in these systems, and this is an important direction for future research.

cond-mat.mtrl-sci↗

arXiv2023

Electromagnetic modeling and science reach of DMRadio-m$^3$

DMRadio-m$^3$ is an experiment that is designed to be sensitive to KSVZ and DFSZ QCD axion models in the 10--200\,MHz (41 neV$/c^2$ -- 0.83 $\mu$eV/$c^2$) range. The experiment uses a solenoidal dc magnetic field to convert an axion dark-matter signal to an ac electromagnetic response in a coaxial copper pickup. The current induced by this axion signal is measured by dc SQUIDs. In this work, we present the electromagnetic modeling of the response of the experiment to an axion signal over the full frequency range of DMRadio-m$^3$, which extends from the low-frequency, lumped-element limit to a regime where the axion Compton wavelength is only a factor of two larger than the detector size. With these results, we determine the live time and sensitivity of the experiment. The primary science goal of sensitivity to DFSZ axions across 30--200 MHz can be achieved with a $3\sigma$ live scan time of 2.9 years.

hep-ex↗

arXiv2021

Magnetic anisotropy in Fe/U and Ni/U bilayers

Magnetometry measurements of Fe/U and Ni/U bilayer systems reveal a non-monotonic dependence of the magnetic anisotropy for U thicknesses in the range 0 nm - 8 nm, with the Fe/U bilayers showing a more prominent effect as compared to Ni/U. The stronger response for Fe/U is ascribed to the stronger 3d-5f hybridization of Fe and U. This non-monotonic behaviour is thought to arise from quantum well states in the uranium overlayers. Estimating an oscillation period from the non-monotonic data, and comparing it to Density Functional Theory calculations, we find that wavevector matches to the experimental data can be made to regions of high spectral density in (010) and (100) cuts of the electronic structure of{\alpha}-U, consistent with the measured texture in the films. Unexpectedly, there are also indications of perpendicular magnetic anisotropy in a subset of Fe/U samples at relatively large U thickness.

cond-mat.mes-hall↗

arXiv2020

Tuneable Correlated Disorder in Alloys

Understanding the role of disorder and the correlations that exist within it, is one of the defining challenges in contemporary materials science. However, there are few material systems, devoid of other complex interactions, which can be used to systematically study the effects of crystallographic conflict on correlated disorder. Here, we report extensive diffuse x-ray scattering studies on the epitaxially stabilised alloy $\mbox{U}_{1-x}\mbox{Mo}_x$, showing that a new form of intrinsically tuneable correlated disorder arises from a mismatch between the preferred symmetry of a crystallographic basis and the lattice upon which it is arranged. Furthermore, combining grazing incidence inelastic x-ray scattering and state-of-the-art ab initio molecular dynamics simulations we discover strong disorder-phonon coupling. This breaks global symmetry and dramatically suppresses phonon-lifetimes compared to alloying alone, providing an additional design strategy for phonon engineering. These findings have implications wherever crystallographic conflict can be accommodated and may be exploited in the development of future functional materials.

cond-mat.mtrl-sci↗

arXiv2014

Searches for continuous gravitational waves from nine young supernova remnants

We describe directed searches for continuous gravitational waves in data from the sixth LIGO science data run. The targets were nine young supernova remnants not associated with pulsars; eight of the remnants are associated with non-pulsing suspected neutron stars. One target's parameters are uncertain enough to warrant two searches, for a total of ten. Each search covered a broad band of frequencies and first and second frequency derivatives for a fixed sky direction. The searches coherently integrated data from the two LIGO interferometers over time spans from 5.3-25.3 days using the matched-filtering F-statistic. We found no credible gravitational-wave signals. We set 95% confidence upper limits as strong (low) as $4\times10^{-25}$ on intrinsic strain, $2\times10^{-7}$ on fiducial ellipticity, and $3\times10^{-6}$ on r-mode amplitude. These beat the indirect limits from energy conservation and are within the range of theoretical predictions for neutron-star ellipticities and r-mode amplitudes.

astro-ph.HE↗

arXiv2014

A directed search for gravitational waves from Scorpius X-1 with initial LIGO

We present results of a search for continuously-emitted gravitational radiation, directed at the brightest low-mass X-ray binary, Scorpius X-1. Our semi-coherent analysis covers 10 days of LIGO S5 data ranging from 50-550 Hz, and performs an incoherent sum of coherent $\mathcal{F}$-statistic power distributed amongst frequency-modulated orbital sidebands. All candidates not removed at the veto stage were found to be consistent with noise at a 1% false alarm rate. We present Bayesian 95% confidence upper limits on gravitational-wave strain amplitude using two different prior distributions: a standard one, with no a priori assumptions about the orientation of Scorpius X-1; and an angle-restricted one, using a prior derived from electromagnetic observations. Median strain upper limits of 1.3e-24 and 8e-25 are reported at 150 Hz for the standard and angle-restricted searches respectively. This proof of principle analysis was limited to a short observation time by unknown effects of accretion on the intrinsic spin frequency of the neutron star, but improves upon previous upper limits by factors of ~1.4 for the standard, and 2.3 for the angle-restricted search at the sensitive region of the detector.

gr-qc↗

arXiv2014

Narrow-band search of continuous gravitational-wave signals from Crab and Vela pulsars in Virgo VSR4 data

In this paper we present the results of a coherent narrow-band search for continuous gravitational-wave signals from the Crab and Vela pulsars conducted on Virgo VSR4 data. In order to take into account a possible small mismatch between the gravitational wave frequency and two times the star rotation frequency, inferred from measurement of the electromagnetic pulse rate, a range of 0.02 Hz around two times the star rotational frequency has been searched for both the pulsars. No evidence for a signal has been found and 95$\%$ confidence level upper limits have been computed both assuming polarization parameters are completely unknown and that they are known with some uncertainty, as derived from X-ray observations of the pulsar wind torii. For Vela the upper limits are comparable to the spin-down limit, computed assuming that all the observed spin-down is due to the emission of gravitational waves. For Crab the upper limits are about a factor of two below the spin-down limit, and represent a significant improvement with respect to past analysis. This is the first time the spin-down limit is significantly overcome in a narrow-band search.

astro-ph.IM↗

arXiv2014

Characterization of the LIGO detectors during their sixth science run

In 2009-2010, the Laser Interferometer Gravitational-wave Observa- tory (LIGO) operated together with international partners Virgo and GEO600 as a network to search for gravitational waves of astrophysical origin. The sensitiv- ity of these detectors was limited by a combination of noise sources inherent to the instrumental design and its environment, often localized in time or frequency, that couple into the gravitational-wave readout. Here we review the performance of the LIGO instruments during this epoch, the work done to characterize the de- tectors and their data, and the effect that transient and continuous noise artefacts have on the sensitivity of LIGO to a variety of astrophysical sources.

gr-qc↗

arXiv2014

Searching for stochastic gravitational waves using data from the two co-located LIGO Hanford detectors

Searches for a stochastic gravitational-wave background (SGWB) using terrestrial detectors typically involve cross-correlating data from pairs of detectors. The sensitivity of such cross-correlation analyses depends, among other things, on the separation between the two detectors: the smaller the separation, the better the sensitivity. Hence, a co-located detector pair is more sensitive to a gravitational-wave background than a non-co-located detector pair. However, co-located detectors are also expected to suffer from correlated noise from instrumental and environmental effects that could contaminate the measurement of the background. Hence, methods to identify and mitigate the effects of correlated noise are necessary to achieve the potential increase in sensitivity of co-located detectors. Here we report on the first SGWB analysis using the two LIGO Hanford detectors and address the complications arising from correlated environmental noise. We apply correlated noise identification and mitigation techniques to data taken by the two LIGO Hanford detectors, H1 and H2, during LIGO's fifth science run. At low frequencies, 40 - 460 Hz, we are unable to sufficiently mitigate the correlated noise to a level where we may confidently measure or bound the stochastic gravitational-wave signal. However, at high frequencies, 460-1000 Hz, these techniques are sufficient to set a $95%$ confidence level (C.L.) upper limit on the gravitational-wave energy density of \Omega(f)<7.7 x 10^{-4} (f/ 900 Hz)^3, which improves on the previous upper limit by a factor of $\sim 180$. In doing so, we demonstrate techniques that will be useful for future searches using advanced detectors, where correlated noise (e.g., from global magnetic fields) may affect even widely separated detectors.

gr-qc↗

arXiv2014

Improved Upper Limits on the Stochastic Gravitational-Wave Background from 2009-2010 LIGO and Virgo Data

Gravitational waves from a variety of sources are predicted to superpose to create a stochastic background. This background is expected to contain unique information from throughout the history of the universe that is unavailable through standard electromagnetic observations, making its study of fundamental importance to understanding the evolution of the universe. We carry out a search for the stochastic background with the latest data from LIGO and Virgo. Consistent with predictions from most stochastic gravitational-wave background models, the data display no evidence of a stochastic gravitational-wave signal. Assuming a gravitational-wave spectrum of Omega_GW(f)=Omega_alpha*(f/f_ref)^alpha, we place 95% confidence level upper limits on the energy density of the background in each of four frequency bands spanning 41.5-1726 Hz. In the frequency band of 41.5-169.25 Hz for a spectral index of alpha=0, we constrain the energy density of the stochastic background to be Omega_GW(f)<5.6x10^-6. For the 600-1000 Hz band, Omega_GW(f)<0.14*(f/900 Hz)^3, a factor of 2.5 lower than the best previously reported upper limits. We find Omega_GW(f)<1.8x10^-4 using a spectral index of zero for 170-600 Hz and Omega_GW(f)<1.0*(f/1300 Hz)^3 for 1000-1726 Hz, bands in which no previous direct limits have been placed. The limits in these four bands are the lowest direct measurements to date on the stochastic background. We discuss the implications of these results in light of the recent claim by the BICEP2 experiment of the possible evidence for inflationary gravitational waves.

gr-qc↗

arXiv2014

First all-sky search for continuous gravitational waves from unknown sources in binary systems

We present the first results of an all-sky search for continuous gravitational waves from unknown spinning neutron stars in binary systems using LIGO and Virgo data. Using a specially developed analysis program, the TwoSpect algorithm, the search was carried out on data from the sixth LIGO Science Run and the second and third Virgo Science Runs. The search covers a range of frequencies from 20 Hz to 520 Hz, a range of orbital periods from 2 to ~2,254 h and a frequency- and period-dependent range of frequency modulation depths from 0.277 to 100 mHz. This corresponds to a range of projected semi-major axes of the orbit from ~0.6e-3 ls to ~6,500 ls assuming the orbit of the binary is circular. While no plausible candidate gravitational wave events survive the pipeline, upper limits are set on the analyzed data. The most sensitive 95% confidence upper limit obtained on gravitational wave strain is 2.3e-24 at 217 Hz, assuming the source waves are circularly polarized. Although this search has been optimized for circular binary orbits, the upper limits obtained remain valid for orbital eccentricities as large as 0.9. In addition, upper limits are placed on continuous gravitational wave emission from the low-mass x-ray binary Scorpius X-1 between 20 Hz and 57.25 Hz.

gr-qc↗