arXiv subjects

Bryan S. Guevara

Publications and source records attributed to Bryan S. Guevara.

4 recordsLinked to original sources

arXiv2026

DQ-MPCC: Dual-Quaternion MPCC for Quadrotor Racing

Quadrotor racing demands aggressive attitude and progress control while passing through every gate, and conventional quadrotor MPCC formulations state the prediction model in inertial coordinates and the attitude error in the body frame. We present a Dual-Quaternion Model Predictive Contouring Control (DQ-MPCC) for quadrotor racing in which the pose is a unit dual quaternion and the contouring errors are projected onto the tangent space of the dual quaternion manifold, expressed in the desired body frame: the same rigid-body dynamics as the conventional model, in unified pose-twist coordinates in the body frame. We compare DQ-MPCC against a baseline MPCC through Monte Carlo software-in-the-loop simulations and real-world racing on an eight-gate circuit of 11x4.5x3.65 m. With the same gains in simulation and hardware, DQ-MPCC keeps every crossing of its completed flights within the prescribed geometric margin, whereas the baseline exceeds it, its median worst-gate offset growing by 71.5% sim-to-real against a 10.1% decrease for DQ-MPCC. Among the configurations that keep every simulated gate crossing within the geometric margin, DQ-MPCC also reduces the minimum lap time by 6.7%, and by 10.5% in the real-world flights, while running onboard at 100 Hz.

cs.RO↗

arXiv2024

Model Predictive Contouring Control with Barrier and Lyapunov Functions for Stable Path-Following in UAV systems

In this study, we propose a novel method that integrates Nonlinear Model Predictive Contour Control (NMPCC) with an Exponentially Stabilizing Control Lyapunov Function (ES-CLF) and Exponential Higher-Order Control Barrier Functions to achieve stable path-following and obstacle avoidance in UAV systems. This framework enables unmanned aerial vehicles (UAVs) to safely navigate around both static and dynamic obstacles while strictly adhering to desired paths. The quaternion-based formulation ensures precise orientation and attitude control, while a robust optimization solver enforces the constraints imposed by the Control Lyapunov Function (CLF) and Control Barrier Functions (CBF), ensuring reliable real-time performance. The method was validated in a Model-in-the-Loop (MiL) environment, demonstrating effective path tracking and obstacle avoidance. The results highlight the framework's ability to minimize both orthogonal and tangential errors, ensuring stability and safety in complex environments.

eess.SY↗

arXiv2024

PD-Based and SINDy Nonlinear Dynamics Identification of UAVs for MPC Design

This paper presents a comprehensive approach to nonlinear dynamics identification for UAVs using a combination of data-driven techniques and theoretical modeling. Two key methodologies are explored: Proportional-Derivative (PD) approximation and Sparse Identification of Nonlinear Dynamics (SINDy). The UAV dynamics are first modeled using the Euler-Lagrange formulation, providing a set of generalized coordinates. However, platform constraints limit the control inputs to attitude angles, and linear and angular velocities along the z-axis. To accommodate these limitations, thrust and torque inputs are approximated using a PD controller, serving as the foundation for nonlinear system identification. In parallel, SINDy, a data-driven method, is employed to derive a compact and interpretable model of the UAV dynamics from experimental data. Both identified models are then integrated into a Model Predictive Control (MPC) framework for accurate trajectory tracking, where model accuracy, informed by data-driven insights, plays a critical role in optimizing control performance. This fusion of data-driven approaches and theoretical modeling enhances the system's robustness and adaptability in real-world conditions, offering a detailed analysis of the UAV's dynamic behavior.

eess.SY↗

arXiv2024

Visual Servoing NMPC Applied to UAVs for Photovoltaic Array Inspection

The photovoltaic (PV) industry is seeing a significant shift toward large-scale solar plants, where traditional inspection methods have proven to be time-consuming and costly. Currently, the predominant approach to PV inspection using unmanned aerial vehicles (UAVs) is based on photogrammetry. However, the photogrammetry approach presents limitations, such as an increased amount of useless data during flights, potential issues related to image resolution, and the detection process during high-altitude flights. In this work, we develop a visual servoing control system applied to a UAV with dynamic compensation using a nonlinear model predictive control (NMPC) capable of accurately tracking the middle of the underlying PV array at different frontal velocities and height constraints, ensuring the acquisition of detailed images during low-altitude flights. The visual servoing controller is based on the extraction of features using RGB-D images and the Kalman filter to estimate the edges of the PV arrays. Furthermore, this work demonstrates the proposal in both simulated and real-world environments using the commercial aerial vehicle (DJI Matrice 100), with the purpose of showcasing the results of the architecture. Our approach is available for the scientific community in: https://github.com/EPVelasco/VisualServoing_NMPC

cs.RO↗