arXiv subjects

Bruno Clerckx

Publications and source records attributed to Bruno Clerckx.

At least 19 recordsLinked to original sources

arXiv2026

Channel Estimation in MIMO Systems Aided by Microwave Linear Analog Computers (MiLACs)

Microwave linear analog computers (MiLACs) have recently emerged as a promising solution for future gigantic multiple-input multiple-output (MIMO) systems, enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided systems remains an open problem. Conventional least squares (LS) and minimum mean square error (MMSE) estimation rely on intensive digital computation, which undermines the computational advantage offered by MiLACs. In this letter, we propose efficient LS and MMSE channel estimation schemes for MiLAC-aided MIMO systems. By designing the training precoder and combiner implemented by lossless and reciprocal MiLACs, the proposed schemes perform LS and MMSE estimation in the analog domain, leaving only simple digital scaling. They achieve identical estimation performance to their digital counterparts while significantly reducing computational complexity. Numerical results verify the effectiveness of the proposed schemes.

eess.SP↗

arXiv2026

Active Beyond-Diagonal Reconfigurable Intelligent Surfaces: Modeling, Architecture Design, and Optimization

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs) are an emerging RIS 2.0 technology for future wireless communication. However, BD-RISs are primarily passive without active amplification, suffering from severe multiplicative path loss. To address the concern of multiplicative path loss, in this work we investigate the active BD-RIS including the modeling, architecture design, and optimization. We first analyze the active BD-RIS using multiport network theory with scattering parameters and derive a physical and electromagnetic compliant active BD-RIS aided communication model. We also design two new active BD-RIS architectures, namely fully- and group-connected active BD-RISs. Based on the proposed model and architecture, we investigate the active BD-RIS aided single-input single-output system and derive the closed-form optimal solution and scaling law of the signal-to-noise ratio. We further investigate the active BD-RIS aided multiple-input multiple-output system and propose an iterative algorithm based on quadratically constrained quadratic programming to maximize the spectral efficiency. Numerical results are provided and show that the active BD-RIS can achieve higher spectral efficiency than the active/passive diagonal RIS and passive BD-RIS. For example, to achieve the same spectral efficiency, the number of elements required by active BD-RIS is less than half of that required by active diagonal RIS, showing the advantages of active BD-RIS.

eess.SP↗

arXiv2026

Analog Computing with Hybrid Couplers and Phase Shifters

Analog computing with microwave signals can enable exceptionally fast computations, potentially surpassing the limits of conventional digital computing. For example, by letting some input signals propagate through a linear microwave network and reading the corresponding output signals, we can instantly compute a matrix-vector product without any digital operations. In this paper, we investigate the computational capabilities of linear microwave networks made exclusively of two low-cost and fundamental components: hybrid couplers and phase shifters, which are both implementable in microstrip. We derive a sufficient and necessary condition characterizing the class of linear transformations that can be computed in the analog domain using these two components. Within this class, we identify three transformations of particular relevance to signal processing, namely the discrete Fourier transform (DFT), the Hadamard transform, and the Haar transform. For each of these, we provide a systematic design method to construct networks of hybrid couplers and phase shifters capable of computing the transformation for any size power of two. To validate our theoretical results, a hardware prototype was designed and fabricated, integrating hybrid couplers and phase shifters to implement the $4\times4$ DFT. A systematic calibration procedure was subsequently developed to characterize the prototype and compensate for fabrication errors. Measured results from the prototype demonstrate successful DFT computation in the analog domain, showing high correlation with theoretical expectations. By realizing an analog computer through standard microwave components, this work demonstrates a practical pathway toward low-latency, real-time analog signal processing.

eess.SP↗

arXiv2026

Codeword-Segmentation Rate-Splitting Multiple Access and Evaluation under Suboptimal Decoding

Rate-Splitting Multiple Access (RSMA) has been recognized as a promising multiple access technique. We propose a novel architecture for downlink RSMA, namely Codeword-Segmentation RSMA (CS-RSMA). Different from conventional RSMA which splits users' messages into common and private parts before encoding, CS-RSMA encodes the users' messages directly, segments the codewords into common and private parts, and transmits the codeword segments using common and private streams. In addition to the principle of CS-RSMA, a novel performance analysis framework is proposed. This framework utilizes a recent discovery in mismatched decoding under finite-alphabet input and interference, and can better capture the receiver's complexity limits. Precoder optimization under finite alphabets and suboptimal decoders for conventional RSMA and CS-RSMA to maximize the Sum-Rate (SR) and the Max-Min Fairness (MMF) is also addressed. The numerical results reveal the theoretical performance of conventional RSMA and CS-RSMA. We observe that CS-RSMA leads to better performance than conventional RSMA in SR, and similar performance in MMF. Furthermore, a physical-layer implementation of CS-RSMA is proposed and evaluated through link-level simulations. Aside performance benefits, we also demonstrate that CS-RSMA brings significant benefits on the encoding/decoding, control signaling, and retransmission process compared to conventional RSMA.

cs.IT↗

arXiv2026

ETSI ISG MAT: Bridging Multiple Access Techniques Research and 6G Standardisation

Improved spectral efficiency and inter-user interference mitigation are important aspects of IMT-2030 and the ongoing 3GPP 6G study. ETSI established the Industry Specification Group on Multiple Access Techniques (ISG MAT) as a research and pre-standardisation activity to build wider consensus on downlink MAT for 3GPP-based 6G systems. Its first report, ETSI GR MAT 001 V1.1.1, provides a standards-oriented comparison of 3GPP-specified techniques, including OMA, MU-MIMO, and MUST, with candidate techniques comprising power-domain NOMA, RSMA, and cache-aided MU-MIMO. The report identifies operating conditions in which candidate MAT can improve spectral efficiency and assesses implications for transceiver processing, network assistance information, and reference-signal requirements. Ongoing work includes realistic 5G NR link-level evaluations and the study of MAT for non-terrestrial networks, providing timely technical evidence for 3GPP 6G standardisation discussions.

eess.SP↗

arXiv2026

Microwave Linear Analog Computers (MiLACs) for Communications: Opportunities and Challenges

Future wireless systems will require ever larger antenna arrays and heavier signal processing, making conventional digital multiple-input multiple-output (MIMO) architectures difficult to scale. In this paper, we show that a possible solution is to offload part of the processing from the digital to the analog domain. This can be done through linear microwave networks designed to compute directly using the communication signals at radio frequency (RF). These networks, denoted as microwave linear analog computers (MiLACs), can perform useful matrix operations instantly through wave propagation. Remarkably, although MiLACs are linear, the output signals can depend nonlinearly on the tunable parameters of the network, enabling the computation of operations beyond simple linear transforms. In particular, MiLACs can realize matrix inversion and pseudo-inversion with complexity scaling quadratically with matrix size, rather than cubically, which is essential in zero-forcing beamforming. We then review how MiLAC-aided MIMO architectures can reduce the number of RF chains, relax the resolution requirements on digital-to-analog converters (DACs) and analog-to-digital converters (ADCs), and decrease the beamforming complexity. We finally discuss the main challenges related to MiLAC and promising directions for future research.

cs.IT↗

arXiv2026

Capacity of Two-User Wireless Systems Aided by Movable Signals

Movable signals have emerged as a third approach to enable smart radio environments (SREs), complementing reconfigurable intelligent surfaces (RISs) and flexible antennas. This paper investigates their potential to enhance multi-user wireless systems. Focusing on two-user systems in line-of-sight (LoS), we characterize the capacity regions of the multiple access channel (MAC) and broadcast channel (BC). Interestingly, movable signals can dynamically adjust the operating frequency to orthogonalize the user channels, thereby significantly expanding the capacity regions. We also study frequency optimization, constraining it in a limited frequency range, and show that movable signals provide up to 45% sum rate gain.

cs.IT↗

arXiv2026

Beyond-Diagonal RIS Under Non-Idealities: Learning-Based Architecture Discovery and Optimization

Beyond-diagonal reconfigurable intelligent surface (BD-RIS) has recently been introduced to enable advanced control over electromagnetic waves to further increase the benefits of traditional RIS in enhancing signal quality and improving spectral and energy efficiency for next-generation wireless networks. A significant issue in designing and deploying BD-RIS is the tradeoff between its performance and circuit complexity. While existing studies have explored optimal architectures to minimize circuit complexity in ideal BD-RIS, architecture discovery for non-ideal BD-RIS remains uninvestigated. Consequently, how non-idealities and circuit complexity jointly affect the performance of BD-RIS remains unclear, making it difficult to achieve the performance-circuit complexity tradeoff in the presence of non-idealities. Essentially, architecture discovery for non-ideal BD-RIS faces challenges from both the computational complexity of global architecture search and the difficulty in achieving global optima. To tackle these challenges, we propose a learning-based two-tier architecture discovery framework (LTTADF) consisting of an architecture generator and a performance optimizer to jointly discover optimal architectures for non-ideal BD-RIS given specific circuit complexities, which can effectively explore over a large architecture space while avoiding getting trapped in poor local optima and thus achieving near-optimal solutions for the performance optimization. Numerical results provide valuable insights for deploying non-ideal BD-RIS considering the performance-circuit complexity tradeoff.

cs.IT↗

arXiv2026

Channel Estimation and Beamforming for Microwave Linear Analog Computers (MiLACs)-Aided Multiuser MISO Systems

Microwave linear analog computers (MiLACs) have recently gained attention for future gigantic multiple-input multiple-output (MIMO) systems by enabling beamforming with greatly reduced hardware and computational cost. However, channel estimation for MiLAC-aided multiuser systems remains an open problem. Conventional channel estimation requires many radio-frequency (RF) chains to access full-dimensional received signals, followed by massive digital processing, which undermines the advantages of MiLAC-aided systems in reducing the number of RF chains and computational complexity. In this paper, we propose computationally efficient channel estimation and beamforming schemes for MiLAC-aided multiuser multiple-input single-output (MU-MISO) systems with a limited number of RF chains. We consider the general case where different user groups experience different channel correlation matrices. By exploiting the rank deficiency of these matrices, the proposed schemes use MiLAC to compress the full-dimensional received signals in the analog domain, making them compatible with the available RF chains while preserving the essential channel information. Then, in the digital domain, only low-dimensional channel estimation is performed based on these compressed observations, substantially reducing computational cost. We further show how regularized zero-forcing beamforming (R-ZFBF) can be efficiently realized from the low-dimensional channel estimates through a cascade of two MiLACs, which offers greater computational flexibility than a single MiLAC. Numerical results show that the proposed schemes reduce computational complexity up to $1540\times$ and $16108\times$, for channel estimation and beamforming, respectively, while achieving performance comparable to digital baselines.

eess.SP↗

arXiv2026

Optimization of Beyond Diagonal RIS: A Universal Framework Applicable to Arbitrary Architectures

Reconfigurable intelligent surfaces (RISs) are envisioned as a promising technology for future wireless communication systems due to their ability to control the propagation environment in a hardware- and energy-efficient way. Recently, the concept of RISs has been extended to beyond-diagonal RISs (BD-RISs), which unlock the full potential of RISs thanks to the presence of tunable interconnections between RIS elements. While various algorithms have been proposed for BD-RIS optimization, they mainly focus on specific architectures whose scattering matrices exhibit very special structures. A universal optimization framework that can accommodate different BD-RIS circuit topologies is still lacking. In this paper, we bridge this research gap by proposing an architecture-independent framework for BD-RIS optimization, with the main focus on sum-rate maximization and transmit power minimization in multiuser multi-input single-output (MU-MISO) systems. Specifically, we first incorporate BD-RIS architectures into the models by connecting the scattering matrix with the admittance matrix and introducing appropriate constraints to the admittance matrix. The formulated problems are then solved by our custom-designed partially proximal alternating direction method of multipliers (pp-ADMM) algorithms. The pp-ADMM algorithms are computationally efficient, with each subproblem either admitting a closed-form solution or being easily solvable. Simulation results demonstrate that the proposed approaches achieve a better trade-off between performance and computational efficiency compared to existing methods.

eess.SP↗

arXiv2026

How Many RF Chains Does a Microwave Linear Analog Computer (MiLAC) Need to Match the Fully-Digital Cramér-Rao Bound?

A microwave linear analog computer (MiLAC) is a tunable microwave network that performs linear operations directly on radio-frequency signals through wave propagation. Used as an antenna-array front end, it can map many antenna signals to a small number of active RF chains. While lossless reciprocal MiLACs have been shown to provide flexible or capacity-achieving beamforming for wireless communications, their sensing performance remains largely unexplored. We analyze direction-of-arrival estimation for $K$ far-field targets using a tunable receive-side lossless reciprocal MiLAC combiner. We show that the Fisher information matrix depends on the combiner only through the orthogonal projector onto its row space and never exceeds that of a fully digital receiver. Equality holds when the row space contains the $2K$-dimensional joint steering--derivative subspace, establishing a zero-gap threshold of two RF chains per target. A dimension-counting argument lower-bounds the number of tunable components required to achieve the digital Cramér--Rao bound for every target configuration. The stem-connected MiLAC attains this bound asymptotically, up to an antenna-count-independent additive overhead, while scaling linearly with the antenna and target counts. Unlike a phase-shifter front end with the same number of RF chains, MiLAC can exactly attain the fully digital bound. Numerical results validate the analysis.

cs.IT↗

arXiv2026

Outage Analysis and Fairness Design for Spatially Correlated FAS-Enabled RSMA Systems

Sixth-generation (6G) systems target higher reliability, denser connectivity, and tighter interference control. {Within this context, rate-splitting multiple access (RSMA) is envisioned as a promising candidate to enhance interference management in future wireless networks by flexibly splitting messages into a common and a private part, while fluid antenna systems (FAS) offer the potential to improve spatial selectivity through dynamic port reconfiguration.} Combining RSMA and FAS therefore enables efficient interference control and adaptive antenna utilization in multiuser multi-input single-output (MISO) networks. However, deriving closed-form outage probability (OP) expressions and tractable user fairness optimization in this scenario remains scarce in the literature. This paper studies a multiuser MISO downlink that jointly leverages RSMA and FAS. We develop a spatial correlation model for FAS using block correlation and incorporate linear precoding with zero-forcing and maximum-ratio transmission. Within this model, we derive closed-form OP expressions using a one-factor construction and generalized Gauss-Laguerre quadrature. Building on these expressions, we formulate a fairness objective that minimizes the worst-user OP and propose a low-complexity algorithm with a linear-program feasibility check to obtain the closed-form solution per iteration. Numerical results across different port counts, channel conditions, and target rates validate the analytical analysis, show that FAS-RSMA reduces OP by up to 92% relative to the fixed-position antenna (FPA) baseline, and demonstrate that fairness-oriented design equalizes user reliability while delivering a 1 dB SNR gain for the worst user at a fixed outage level.

eess.SP↗

arXiv2026

Beamforming Design for Stem-Connected Microwave Linear Analog Computer (MiLAC)-Aided Multiuser MISO Downlinks

A microwave linear analog computer (MiLAC) is a tunable microwave network that performs computation through wave propagation in the analog domain. In beamforming, data streams pass through a reconfigurable admittance network and emerge as antenna signals. For communications, MiLACs are preferably lossless and reciprocal to avoid power dissipation and non-reciprocal components, but these constraints limit the analog beamformers they can realize. Fully-connected MiLACs offer broad flexibility at the cost of a quadratic number of tunable admittances in the antenna count. Stem-connected MiLACs reduce this scaling to linear and preserve point-to-point capacity, but their role in multiuser downlink beamforming and under bounded, discrete hardware constraints has remained open. This paper addresses both questions for the multiuser multiple-input single-output downlink. We show that a stem-connected MiLAC can realize every beamformer on the complex Stiefel manifold and prove that, when $N\ge 2K-1$, this Stiefel-restricted design achieves the same sum-rate as the fully-connected MiLAC, where $N$ and $K$ are the numbers of transmit antennas and users. We then develop a weighted minimum mean-square error solver with a Riemannian Stiefel update, together with a closed-form projection baseline and an alternating refinement for bounded, discrete susceptances. Simulations show that the stem-connected MiLAC matches fully-connected MiLAC performance, approaches the fully digital sum-rate upper bound without symbol-rate digital processing, and recovers most of the loss caused by direct hardware-grid quantization.

eess.SP↗

arXiv2026

Lossy Microwave Linear Analog Computer (MiLAC) for Future MIMO: Learning-based Architecture Designs for Spectral and Energy Efficiency Maximization

Microwave linear analog computers (MiLACs) offer a transformative paradigm for future multiple-input multiple-output (MIMO) systems by shifting complex signal processing into the analog domain, thereby significantly reducing computational complexity, radio-frequency chains, and analog-digital converters, while speeding up computation. However, the practical deployment of MiLACs is severely constrained by the inherent hardware losses of the tunable admittance components (TACs) interconnecting MiLAC ports, which introduce severe inter-stream interference and fundamentally limit the spectral efficiency (SE) of the system. In addition, while denser architectures offer greater spatial degrees of freedom to mitigate inter-stream interference, the cumulative hardware losses and power consumption of massive TACs severely degrade the system's energy efficiency (EE). Consequently, designing architectures for lossy MiLACs emerges as a critical yet unresolved challenge, as it necessitates striking a delicate tradeoff between interference suppression and cumulative hardware losses/power consumption. To address this challenge, this paper investigates the joint MiLAC architecture design and performance (SE/EE) maximization in lossy MiLAC-aided MIMO systems. We propose a novel learning-based joint architecture and performance optimization framework (LJAPOF) that unifies the design of MiLAC architectures and analog beamforming configurations for lossy MiLACs under both SE- and EE-oriented objectives. Numerical results demonstrate that by intelligently navigating the fundamental tradeoff between interference suppression and hardware/power consumption, the proposed LJAPOF can design optimal MiLAC architectures that consistently outperform stem-connected and fully-connected MiLACs in maximizing the system's SE and EE.

eess.SP↗

arXiv2026

Microwave Linear Analog Computer (MiLAC) for Simultaneous Active and Passive Beamforming

Microwave linear analog computers (MiLACs) have recently emerged to enable high-performance and efficient beamforming in the analog domain. In this paper, we introduce a dual-functionality framework for MiLAC-aided transceivers. Beyond analog-domain precoding/combining (active beamforming), a MiLAC and its antenna array can simultaneously act as a reconfigurable intelligent surface (RIS) (passive beamforming). This allows the MiLAC to execute beamforming for transmission/reception while reflecting external incident signals. We provide an optimal reconfiguration strategy for this dual-functional MiLAC, and characterize the fundamental limits on the trade-off between active and passive rate, namely the capacity region bounds and the sum-rate capacity.

cs.IT↗

arXiv2026

Fractional Programming and Manifold Optimization for Reciprocal BD-RIS Scattering Matrix Design

We investigate the problem of maximizing the sum-rate performance of a beyond-diagonal reconfigurable intelligent surface (BD-RIS)-aided multi-user (MU)-multiple-input single-output (MISO) system using fractional programming (FP) techniques. More specifically, we leverage the Lagrangian Dual Transform (LDT) and Quadratic Transform (QT) to derive an equivalent objective function which is then solved iteratively via a manifold optimization framework. It is shown that these techniques reduce the complexity of the optimization problem for the scattering matrix solution, while also providing notable performance gains compared to state-of-the-art (SotA) methods under the same system conditions. Simulation results confirm the effectiveness of the proposed method in improving sum-rate performance.

eess.SP↗

arXiv2026

Microwave Linear Analog Computer (MiLAC)-Aided MIMO Radar Sensing: Transmit Beamforming Design and DoA Estimation

Multiple-input multiple-output (MIMO) radar has waveform diversity and large spatial degrees of freedom (DoFs), making it attractive for high-resolution sensing. Scaling MIMO radar to massive arrays can further improve sensing performance, but it also increases hardware cost, power consumption, and digital processing complexity. The microwave linear analog computer (MiLAC) can tackle these challenges by moving linear operations from the digital domain to the analog domain. MiLAC has shown promising benefits for communications in recent studies and this paper identifies its potential for radar sensing. Specifically, we consider both MiLAC-aided transmit beamforming and receiver-side two-dimensional discrete Fourier transform (2D-DFT)-based direction-of-arrival (DoA) estimation. For transmit beamforming, we formulate a weighted Cramer Rao bound (CRB) minimization problem under lossless and reciprocal MiLAC constraints and propose a penalty dual decomposition (PDD)-based iterative algorithm to address the non-convex problem. We further prove that MiLAC-aided and fully-digital beamforming achieve the same CRB. For receiver processing, we show that the 2D DFT can be implemented by a lossless reciprocal MiLAC, which enables analog-domain DoA estimation without digital optimization. Numerical results confirm the theoretical finding and show that the MiLAC-aided approach achieves the same CRB and DoA estimation performance as the fully-digital benchmark. Meanwhile, hardware cost and power consumption are reduced because only low-resolution DACs are required at the transmitter, while RF chains and ADCs are eliminated at the receiver. Moreover, performing the 2D DFT in the analog domain eliminates all digital DFT operations for DoA estimation.

eess.SP↗

arXiv2026

RIS Optimization and Scaling Laws in Multi-Operator Systems: Is Quadratic Scaling Achievable?

This paper studies multi-operator wireless communication systems aided by general reconfigurable intelligent surface (RIS), including both conventional single-connected RIS and beyond-diagonal RIS (BD-RIS). Specifically, we consider a system where multiple operators coexist in the same area over different frequency bands, each with a single-antenna base station, while one operator serves its single-antenna user with the aid of an RIS. In such a system, the RIS may unintentionally reflect signals from the non-serving operators, leading to inter-operator interference and rapid fluctuations of their effective channels. To address this issue, we propose a practical RIS design framework that maximizes the received signal power of the serving operator while enforcing fixed RIS-reflected channels of the non-serving operators. We derive closed-form solutions to the resulting optimization problem, based on a novel technique to deal with the coupled unitary and linear equality constraints. We further give scaling law analysis of the received signal power. For a two-operator system, the received signal power scales quadratically with the number of RIS elements for group-connected BD-RIS with group size Gs>=2, whereas for conventional single-connected RIS it scales only linearly. More generally, for an L-operator system with L-1 non-serving operators, the scaling-law transition occurs at Gs=L, where quadratic scaling is achieved when Gs>=L, and linear scaling otherwise. These results demonstrate that, in a multi-operator system, quadratic scaling is achievable only with BD-RIS architectures having enough interconnections. Simulation results validate the analysis and show the significant gain of BD-RIS over conventional RIS in multi-operator systems. In particular, group-connected BD-RIS with Gs=2 achieves a 13dB gain over conventional RIS in a two-operator system with a 128-element RIS.

cs.IT↗