arXiv subjects

Bruno Christophe

Publications and source records attributed to Bruno Christophe.

At least 19 recordsLinked to original sources

arXiv2022

Result of the MICROSCOPE Weak Equivalence Principle test

The space mission MICROSCOPE dedicated to the test of the Equivalence Principle (EP) operated from April 25, 2016 until the deactivation of the satellite on October 16, 2018. In this analysis we compare the free-fall accelerations ($a_{\rm A}$ and $a_{\rm B}$) of two test masses in terms of the E\"otv\"os parameter $\eta({\rm{A, B}}) = 2 \frac{a_{\rm A}- a_{\rm B}}{a_{\rm A}+ a_{\rm B}}$. No EP violation has been detected for two test masses, made from platinum and titanium alloys, in a sequence of 19 segments lasting from 13 to 198 hours down to the limit of the statistical error which is smaller than $10^{-14}$ for $ \eta({\rm{Ti, Pt}})$. Accumulating data from all segments leads to $\eta({\rm{Ti, Pt}}) =[-1.5\pm{}2.3{\rm (stat)}\pm{}1.5{\rm (syst)}] \times{}10^{-15}$ showing no EP violation at the level of $2.7\times{}10^{-15}$ if we combine stochastic and systematic errors quadratically. This represents an improvement of almost two orders of magnitude with respect to the previous best such test performed by the E\"ot-Wash group. The reliability of this limit has been verified by comparing the free falls of two test masses of the same composition (platinum) leading to a null E\"otv\"os parameter with a statistical uncertainty of $1.1\times{}10^{-15}$.

gr-qc↗

arXiv2022

MICROSCOPE mission: final results of the test of the Equivalence Principle

The MICROSCOPE mission was designed to test the Weak Equivalence Principle (WEP), stating the equality between the inertial and the gravitational masses, with a precision of $10^{-15}$ in terms of the E\"otv\"os ratio $\eta$. Its experimental test consisted of comparing the accelerations undergone by two collocated test masses of different compositions as they orbited the Earth, by measuring the electrostatic forces required to keep them in equilibrium. This was done with ultra-sensitive differential electrostatic accelerometers onboard a drag-free satellite. The mission lasted two and a half years, cumulating five-months-worth of science free-fall data, two thirds with a pair of test masses of different compositions -- Titanium and Platinum alloys -- and the last third with a reference pair of test masses of the same composition -- Platinum. We summarize the data analysis, with an emphasis on the characterization of the systematic uncertainties due to thermal instabilities and on the correction of short-lived events which could mimic a WEP violation signal. We found no violation of the WEP, with the E\"otv\"os parameter of the Titanium and Platinum pair constrained to $\eta({\rm Ti, Pt})~=~ [-1.5 \pm 2.3~{\rm (stat)} \pm 1.5~{\rm (syst)}]~\times 10^{-15}$ at $1\sigma$ in statistical errors.

gr-qc↗

arXiv2022

Hybrid electrostatic-atomic accelerometer for future space gravity missions

Long term observation of temporal Earth's gravity field with enhanced temporal and spatial resolution is a major objective for future satellite gravity missions. Improving the performance of the accelerometers present in such missions is one of the main path to explore. In this context, we propose to study an original concept of a hybrid accelerometer associating a state-of-the-art electrostatic accelerometer (EA) and a promising quantum sensor based on cold atom interferometry. To assess the performance potential of such instrument, numerical simulations have been performed to determine its impact in term of gravity field retrieval. Taking advantage of the long term stability of the cold atom interferometer (CAI), it has been shown that the reduced drift of the hybrid sensor could lead to improved gravity field retrieval. Nevertheless this gain vanishes once temporal variations of the gravity field and related aliasing effects are taken into account. Improved de-aliasing models or some specific satellite constellations are then required to maximize the impact of the accelerometer performance gain. To evaluate the achievable acceleration performance in orbit, a numerical simulator of the hybrid accelerometer has been developed and preliminary results are given. The instrument simulator has been in part validated by reproducing the performance achieved with a hybrid lab prototype operating on ground. The problematic of satellite rotation impact on the CAI has been also investigated both with instrument performance simulations and experimental demonstrations. It has been shown that the proposed configuration, where the EA's proof-mass acts as the reference mirror for the CAI, seems a promising approach to allow the mitigation of satellite rotation. A preliminary design has been elaborated along with a preliminary error, mass, volume and electrical power consumption budget.

physics.atom-ph↗

arXiv2022

MAQRO -- BPS 2023 Research Campaign Whitepaper

The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. These new technologies will open up the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade.

quant-ph↗

arXiv2022

MICROSCOPE Mission scenario, ground segment and data processing

Testing the Weak Equivalence Principle (WEP) to a precision of $10^{-15}$ requires a quantity of data that give enough confidence on the final result: ideally, the longer the measurement the better the rejection of thestatistical noise. The science sessions had a duration of 120 orbits maximum and were regularly repeated and spaced out to accommodate operational constraints but also in order to repeat the experiment in different conditions and to allow time to calibrate the instrument. Several science sessions were performed over the 2.5 year duration of the experiment. This paper aims to describe how the data have been produced on the basis of a mission scenario and a data flow process, driven by a tradeoff between the science objectives and the operational constraints. The mission was led by the Centre National d'Etudes Spatiales (CNES) which provided the satellite, the launch and the ground operations. The ground segment was distributed between CNES and Office National d'Etudes et de Recherches A\'erospatiales (ONERA). CNES provided the raw data through the Centre d'Expertise de Compensation de Tra\^{i}n\'{e}e (CECT: Drag-free expertise centre). The science was led by the Observatoire de la C\^ote d{'}Azur (OCA) and ONERA was in charge of the data process. The latter also provided the instrument and the Science Mission Centre of MICROSCOPE (CMSM).

astro-ph.IM↗

arXiv2021

MICROSCOPE: systematic errors

The MICROSCOPE mission aims to test the Weak Equivalence Principle (WEP) in orbit with an unprecedented precision of 10$^{-15}$ on the E\"otv\"os parameter thanks to electrostatic accelerometers on board a drag-free micro-satellite. The precision of the test is determined by statistical errors, due to the environment and instrument noises, and by systematic errors to which this paper is devoted. Systematic error sources can be divided into three categories: external perturbations, such as the residual atmospheric drag or the gravity gradient at the satellite altitude, perturbations linked to the satellite design, such as thermal or magnetic perturbations, and perturbations from the instrument internal sources. Each systematic error is evaluated or bounded in order to set a reliable upper bound on the WEP parameter estimation uncertainty.

astro-ph.IM↗

arXiv2021

MICROSCOPE instrument in-flight characterization

Since the MICROSCOPE instrument aims to measure accelerations as low as a few 10$^{-15}$\,m\,s$^{-2}$ and cannot operate on ground, it was obvious to have a large time dedicated to its characterization in flight. After its release and first operation, the characterization experiments covered all the aspects of the instrument design in order to consolidate the scientific measurements and the subsequent conclusions drawn from them. Over the course of the mission we validated the servo-control and even updated the PID control laws for each inertial sensor. Thanks to several dedicated experiments and the analysis of the instrument sensitivities, we have been able to identify a number of instrument characteristics such as biases, gold wire and electrostatic stiffnesses, non linearities, couplings and free motion ranges of the test-masses, which may first impact the scientific objective and secondly the analysis of the instrument good operation.

astro-ph.IM↗

arXiv2020

MICROSCOPE Satellite and its Drag-Free and Attitude Control System

This paper focus on the description of the design and performance of the MICROSCOPE satellite and its Drag-Free and Attitude Control System (DFACS). The satellite is derived from CNES' Myriade platform family, albeit with significant upgrades dictated by the unprecedented MICROSCOPE's mission requirements. The 300kg drag-free microsatellite has completed its 2-year flight with higher-than-expected performances. Its passive thermal concept allowed for variations smaller than 1 $μ$K at the measurement frequency $f_{\rm{EP}}$. The propulsion system provided a 6 axis continuous and very low noise thrust from zero to some hundreds of micronewtons. Finally, the performance of its DFACS (aimed at compensating the disturbing forces and torques applied to the satellite) is the finest ever achieved in low Earth orbit, with residual accelerations along the three axes are lower than $10^{-12} {\rm m/s}^2$ at $f_{\rm{EP}}$ over 8 days.

gr-qc↗

arXiv2020

MICROSCOPE instrument description and validation

Dedicated accelerometers have been developed for the MICROSCOPE mission taking into account the specific range of acceleration to be measured on board the satellite. Considering one micro-g and even less as the full range of the instrument, leads to a customized concept and a high performance electronics for the sensing and servo-actuations of the accelerometer test-masses. In addition to a very accurate geometrical sensor core, a high performance electronics architecture provides the measurement of the weak electrostatic forces and torques applied to the test-masses. A set of capacitive sensors delivers the position and the attitude of the test-mass with respect to a very steady gold coated cage made in silica. The voltages applied on the electrodes surrounding each test-mass are finely controlled to generate the adequate electrical field and so the electrostatic pressures on the test-mass. This field maintains the test-mass motionless with respect to the instrument structure. Digital control laws are implemented in order to enable instrument operation flexibility and a weak position sensor noise. These electronics provide both the scientific data for MICROSCOPE's test of General Relativity and the data for the satellite drag-free and attitude control system (DFACS).

physics.ins-det↗

arXiv2020

MICROSCOPE mission analysis, requirements and expected performance

The MICROSCOPE mission aimed to test the Weak Equivalence Principle (WEP) to a precision of $10^{-15}$. The WEP states that two bodies fall at the same rate on a gravitational field independently of their mass or composition. In MICROSCOPE, two masses of different compositions (titanium and platinum alloys) are placed on a quasi-circular trajectory around the Earth. They are the test-masses of a double accelerometer. The measurement of their accelerations is used to extract a potential WEP violation that would occur at a frequency defined by the motion and attitude of the satellite around the Earth. This paper details the major drivers of the mission leading to the specification of the major subsystems (satellite, ground segment, instrument, orbit...). Building upon the measurement equation, we derive the objective of the test in statistical and systematic error allocation and provide the mission's expected error budget.

gr-qc↗

arXiv2019

Space test of the Equivalence Principle: first results of the MICROSCOPE mission

The Weak Equivalence Principle (WEP), stating that two bodies of different compositions and/or mass fall at the same rate in a gravitational field (universality of free fall), is at the very foundation of General Relativity. The MICROSCOPE mission aims to test its validity to a precision of $10^{-15}$, two orders of magnitude better than current on-ground tests, by using two masses of different compositions (titanium and platinum alloys) on a quasi-circular trajectory around the Earth. This is realised by measuring the accelerations inferred from the forces required to maintain the two masses exactly in the same orbit. Any significant difference between the measured accelerations, occurring at a defined frequency, would correspond to the detection of a violation of the WEP, or to the discovery of a tiny new type of force added to gravity. MICROSCOPE's first results show no hint for such a difference, expressed in terms of Eötvös parameter $δ(Ti,Pt)=[-1\pm{}9{\rm (stat)}\pm{}9{\rm (syst)}] \times{}10^{-15}$ (both 1$σ$ uncertainties) for a titanium and platinum pair of materials. This result was obtained on a session with 120 orbital revolutions representing 7\% of the current available data acquired during the whole mission. The quadratic combination of 1$σ$ uncertainties leads to a current limit on $δ$ of about $1.3\times{}10^{-14}$.

gr-qc↗

arXiv2019

The local dark sector. Probing gravitation's low-acceleration frontier and dark matter in the Solar System neighborhood

We speculate on the development and availability of new innovative propulsion techniques in the 2040s, that will allow us to fly a spacecraft outside the Solar System (at 150 AU and more) in a reasonable amount of time, in order to directly probe our (gravitational) Solar System neighborhood and answer pressing questions regarding the dark sector (dark energy and dark matter). We identify two closely related main science goals, as well as secondary objectives that could be fulfilled by a mission dedicated to probing the local dark sector: (i) begin the exploration of gravitation's low-acceleration regime with a man-made spacecraft and (ii) improve our knowledge of the local dark matter and baryon densities. Those questions can be answered by directly measuring the gravitational potential with an atomic clock on-board a spacecraft on an outbound Solar System orbit, and by comparing the spacecraft's trajectory with that predicted by General Relativity through the combination of ranging data and the in-situ measurement (and correction) of non-gravitational accelerations with an on-board accelerometer. Despite a wealth of new experiments getting online in the near future, that will bring new knowledge about the dark sector, it is very unlikely that those science questions will be closed in the next two decades. More importantly, it is likely that it will be even more urgent than currently to answer them. Tracking a spacecraft carrying a clock and an accelerometer as it leaves the Solar System may well be the easiest and fastest way to directly probe our dark environment.

astro-ph.IM↗

arXiv2017

The MICROSCOPE mission: first results of a space test of the Equivalence Principle

According to the Weak Equivalence Principle, all bodies should fall at the same rate in a gravitational field. The MICROSCOPE satellite, launched in April 2016, aims to test its validity at the $10^{-15}$ precision level, by measuring the force required to maintain two test masses (of titanium and platinum alloys) exactly in the same orbit. A non-vanishing result would correspond to a violation of the Equivalence Principle, or to the discovery of a new long-range force. Analysis of the first data gives $δ\rm{(Ti,Pt)}= [-1 \pm 9 (\mathrm{stat}) \pm 9 (\mathrm{syst})] \times 10^{-15}$ (1$σ$ statistical uncertainty) for the titanium-platinum Eötvös parameter characterizing the relative difference in their free-fall accelerations.

astro-ph.IM↗

arXiv2016

Gaussian regression and power spectral density estimation with missing data: The MICROSCOPE space mission as a case study

We present a Gaussian regression method for time series with missing data and stationary residuals of unknown power spectral density (PSD). The missing data are efficiently estimated by their conditional expectation as in universal Kriging, based on the circulant approximation of the complete data covariance. After initialization with an autoregessive fit of the noise, a few iterations of estimation/reconstruction steps are performed until convergence of the regression and PSD estimates, in a way similar to the expectation-conditional-maximization algorithm. The estimation can be performed for an arbitrary PSD provided that it is sufficiently smooth. The algorithm is developed in the framework of the MICROSCOPE space mission whose goal is to test the weak equivalence principle (WEP) with a precision of $10^{-15}$. We show by numerical simulations that the developed method allows us to meet three major requirements: to maintain the targeted precision of the WEP test in spite of the loss of data, to calculate a reliable estimate of this precision and of the noise level, and finally to provide consistent and faithful reconstructed data to the scientific community.

gr-qc↗

arXiv2015

Macroscopic quantum resonators (MAQRO): 2015 Update

Do the laws of quantum physics still hold for macroscopic objects - this is at the heart of Schrödinger's cat paradox - or do gravitation or yet unknown effects set a limit for massive particles? What is the fundamental relation between quantum physics and gravity? Ground-based experiments addressing these questions may soon face limitations due to limited free-fall times and the quality of vacuum and microgravity. The proposed mission MAQRO may overcome these limitations and allow addressing those fundamental questions. MAQRO harnesses recent developments in quantum optomechanics, high-mass matter-wave interferometry as well as state-of-the-art space technology to push macroscopic quantum experiments towards their ultimate performance limits and to open new horizons for applying quantum technology in space. The main scientific goal of MAQRO is to probe the vastly unexplored "quantum-classical" transition for increasingly massive objects, testing the predictions of quantum theory for truly macroscopic objects in a size and mass regime unachievable in ground-based experiments. The hardware for the mission will largely be based on available space technology. Here, we present the MAQRO proposal submitted in response to the (M4) Cosmic Vision call of the European Space Agency for a medium-size mission opportunity with a possible launch in 2025.

quant-ph↗

arXiv2013

Experimental demonstration of bias rejection from electrostatic accelerometer measurements

In order to test gravitation in the Solar System, it is necessary to improve the orbit restitution of interplanetary spacecrafts. The addition of an accelerometer on board is a major step toward this goal because this instrument measures the non-gravitational acceleration of the spacecraft. It must be able to perform measurements at low frequencies with no bias to provide an additional observable of interest. Since electrostatic accelerometers suffer a bias, a technological upgrade has been proposed by Onera. It consists in adding to an electrostatic accelerometer a rotating platform which allows modulating the signal of interest and retrieving it without bias after post-processing. Using this principle, a measurement method and a post-processing method have been developed. The objective of this article is to validate these methods experimentally. To do so, a horizontally controlled pendulum was used to apply a known signal to an accelerometer mounted on a rotating platform. The processing of the experimental data demonstrates the ability to make acceleration measurements with no bias. In addition, the experimental precision on the unbiased acceleration obtained after post-processing corresponds to the precision predicted theoretically.

physics.ins-det↗

arXiv2013

Unbiased acceleration measurements with an electrostatic accelerometer on a rotating platform

The Gravity Advanced Package is an instrument composed of an electrostatic accelerometer called MicroSTAR and a rotating platform called Bias Rejection System. It aims at measuring with no bias the non-gravitational acceleration of a spacecraft. It is envisioned to be embarked on an interplanetary spacecraft as a tool to test the laws of gravitation. MicroSTAR is based on Onera's experience and inherits in orbit technology. The addition of the rotating platform is a technological upgrade which allows using an electrostatic accelerometer to make measurements at low frequencies with no bias. To do so, the Bias Rejection System rotates MicroSTAR such that the signal of interest is separated from the bias of the instrument in the frequency domain. Making these unbiased low-frequency measurements requires post-processing the data. The signal processing technique developed for this purpose is the focus of this article. It allows giving the conditions under which the bias is completely removed from the signal of interest. And the precision of the unbiased measurements can be fully characterized: given the characteristics of the subsystems, it is possible to reach a precision of 1 pm s$^{-2}$ on the non-gravitational acceleration for an integration time of 3 h.

physics.ins-det↗

arXiv2012

OSS (Outer Solar System): A fundamental and planetary physics mission to Neptune, Triton and the Kuiper Belt

The present OSS mission continues a long and bright tradition by associating the communities of fundamental physics and planetary sciences in a single mission with ambitious goals in both domains. OSS is an M-class mission to explore the Neptune system almost half a century after flyby of the Voyager 2 spacecraft. Several discoveries were made by Voyager 2, including the Great Dark Spot (which has now disappeared) and Triton's geysers. Voyager 2 revealed the dynamics of Neptune's atmosphere and found four rings and evidence of ring arcs above Neptune. Benefiting from a greatly improved instrumentation, it will result in a striking advance in the study of the farthest planet of the Solar System. Furthermore, OSS will provide a unique opportunity to visit a selected Kuiper Belt object subsequent to the passage of the Neptunian system. It will consolidate the hypothesis of the origin of Triton as a KBO captured by Neptune, and improve our knowledge on the formation of the Solar system. The probe will embark instruments allowing precise tracking of the probe during cruise. It allows to perform the best controlled experiment for testing, in deep space, the General Relativity, on which is based all the models of Solar system formation. OSS is proposed as an international cooperation between ESA and NASA, giving the capability for ESA to launch an M-class mission towards the farthest planet of the Solar system, and to a Kuiper Belt object. The proposed mission profile would allow to deliver a 500 kg class spacecraft. The design of the probe is mainly constrained by the deep space gravity test in order to minimise the perturbation of the accelerometer measurement.

gr-qc↗