arXiv subjects

Bruno Blais

Publications and source records attributed to Bruno Blais.

13 recordsLinked to original sources

arXiv2026

A discontinuous Petrov-Galerkin finite-element framework for the simulation of microwave-heated flows

We present a high-order multiphysics solver for the simulation of microwave-heated flows. The solver couples a discontinuous Petrov-Galerkin (DPG) finite element method for the time-harmonic Maxwell equations with continuous Galerkin finite element methods for the heat equation and the incompressible Navier-Stokes equations. We validate the electromagnetic solver against multiple benchmark problems: wave propagation in a rectangular waveguide, a cavity problem with a singular solution, and a microwave-heated obstacle problem, comparing our results against numerical and experimental data from the literature. The results confirm the validity of the implementation and demonstrate its ability to perform adaptive mesh refinement using the DPG method's built-in error estimator. The final part of the study showcases the capabilities of the multiphysics framework through simulations of microwave-heated flow around obstacles with singular geometric features. These results highlight the potential of the proposed framework for the simulation and optimization of microwave-assisted chemical processes. Finally, the developed high-order multiphysics solver has a low memory footprint, since the electromagnetic solver relies on a Conjugate Gradient (CG) iterative solver and the fluid solver is implemented in a matrix-free fashion, making the overall approach scalable and well-suited for large-scale parallel simulations.

math.NA↗

arXiv2026

From Angle of Repose to Heap Morphology: Full-Field Calibration of DEM for Granular Powders

The calibration of discrete element method (DEM) models is commonly performed by tuning model parameters to match an experimental measurements, most commonly the angle of repose (AOR). Although widely used, AOR-based calibration metrics do not adequately characterize the full heap morphology, particularly when dealing with cohesive granular materials. As a result, AOR-based calibrations often leads to non-unique parameter sets. In this work, we propose a DEM calibration procedure based on full-field image analysis of static powder heaps rather than scalar AOR measurements. The method compares an average experimental heap profile (AEHP), obtained from repeated GranuHeap experiments, with an average numerical heap profile (ANHP) generated from DEM simulations. This comparison is performed using pixel-wise grayscale intensity values of both average heap profiles. Two metal powders commonly used in additive manufacturing, Ti6Al4V and Al6061, are used to evaluate the proposed methodology. This work highlights the limitations of traditional AOR-based approaches and demonstrates that full-field heap morphology offers a more reliable framework for DEM calibration.

physics.app-ph↗

arXiv2026

Surface-access limitation in catalytic porous monoliths: Performance diagnosis using pore-resolved CFD

Porous monoliths are promising catalyst supports due to their high surface area, interconnected channels, thermal stability and mechanical robustness. However, their tunable topology complicates design: trade-offs between conversion and pressure drop are not reliably captured by macroscopic descriptors, such as porosity, specific surface area, or tortuosity. Pore-resolved computational fluid dynamics~(PRCFD) addresses this gap by resolving pore-scale flow and transport, enabling diagnostics and discrimination between macroscopically similar structures. We investigate surface-access-boundedness: a case where conversion is limited by flow maldistribution and incomplete utilisation of the catalytic surface, even at low Damk\"ohler numbers (Da<1). Using palladium-nanoparticle-coated silicone monoliths for p-nitrophenol reduction, we perform reactive PRCFD in microcomputed-tomography-based geometries, calibrate a pseudo-heterogeneous eggshell reaction model, and validate transferability across samples and flow rates. We then diagnose surface-access-boundedness via the limited influence of diffusivity and reaction kinetics on conversion. Furthermore, we compare synthesised random monoliths with triply periodic minimal surface structures under matched porosity and surface area. Significantly, the required pumping power can decrease by up to an order of magnitude for the same molar production rate, depending on topology. These results show that, in heterogeneous systems affected by surface-access limitations, reactor performance is governed by structure-dependent surface accessibility rather than intrinsic kinetics or molecular diffusion alone, and that validated reactive PRCFD provides a practical framework to diagnose and compare porous reactor geometries under realistic operating conditions.

physics.flu-dyn↗

arXiv2026

A Geometric Reinitialization for Conservative Level-Set Methods in the Context of Capillary Flows

Simulations of immiscible two-phase flows involving surface tension (ST) require a robust high-fidelity framework. State-of-the-art multi-phase models, such as the Conservative Level-Set (CLS) approach, use Eulerian representations of the fluids and their interface, and require reinitialization methods to ensure volume conservation and accurate ST force modeling. This work proposes a new geometric reinitialization strategy for CLS formulations as an alternative to the typical PDE-based reinitialization methods. Building on the geometric reinitialization developed in context of level-set frameworks, the proposed method is an extension to the CLS approach within an open-source finite element framework that allows for fully distributed and adaptively refined, two- and three-dimensional meshes. This extension enables application of the geometric reinitialization method to large-scale three-dimensional problems with strongly deforming interfaces, including breakup. The method is quantitatively compared to two established reinitialization approaches: the PDE-based reinitialization proposed in the original CLS method and a simple projection-based approach. The assessment comprises three 3D application cases of increasing complexity: the capillary migration of a droplet, the rise of a bubble, and the Rayleigh-Plateau instability development in a capillary jet. The geometric method leads to high-quality, spatially-converged results in good agreement with benchmark and reference solutions. It robustly and accurately recovers expected interface topology-based metrics (e.g., the volume, surface area and sphericity), and relevant flow quantities. In addition, the proposed method has only two parameters and is robust across parameter choices and cases.

physics.flu-dyn↗

arXiv2025

Active Cooling Device: A Flexible, Lab-Scale Experimental Unit to Develop Spatio-Temporal Temperature Control Strategies

We present an experimental unit that realizes the ``multi-input, multi-output manifold'' thermal management technology proposed by Lamarre & Raymond (2023). The proposed setup can be used for experiments aimed at controlling spatiotemporal temperature distribution. Temperature control is achieved by impinging coolant fluid jets, leveraging a manifold of channels targeted to the surface. The direction of the fluid is controlled by shifting the role of channels between inputs, outputs, or closing them. Files associated with this work include Computer-Aided Design (CAD) STEP files, Gerber files to manufacture a Printed Circuit Board (PCB), and a Graphical User Interface (GUI) written in Python. We provide a step-by-step guide to assemble the experimental setup. We also provide instructions to interact with the setup through the GUI, which allows for real-time tracking of sample temperature and flow rates per flow control device. Additionally, we provide examples of usage of the setup, including system characterization with step response, Proportional-Integral-Derivative performance tracking, and disturbance rejection in a coupled system. Extending the application is accessible through the files provided in the open repository associated with this work. The active cooling device presents a safe, flexible, and complete design, allowing for lab-scale assessment of the performance of custom temperature control strategies using enclosed impinging jets.

eess.SY↗

arXiv2025

Increase in packing density during multi-layer powder spreading: An experimental and numerical study

A custom apparatus designed to isolate and replicate the spreading process of metal powder in additive manufacturing demonstrates a sudden and unexplained increase in packing density beyond layers 5 to 10. We replicate the experiments that lead to densification with the discrete element method (DEM) using \lethe{}, an open-source software framework. We show that large-scale multi-layer DEM simulations are able to reproduce the densification observed experimentally. Using the Lagrangian simulation results, we highlight significant particle displacement in the powder bed at lower layer number, accompanied by static zones generated by the vertical wall surrounding the powder bed. The amplitude of the densification and the layer number at which it starts to occur is correlated to the distance between those two vertical walls which delimit the powder spreading area. This study addresses the gap between mono-layer powder spreading studies on hard-flat surfaces and the actual metal powder-based additive manufacturing processes by providing a better understanding of how the powder bed behaves during multi-layer spreading.

physics.app-ph↗

arXiv2025

Surrogate Model for Heat Transfer Prediction in Impinging Jet Arrays using Dynamic Inlet/Outlet and Flow Rate Control

This study presents a surrogate model designed to predict the Nusselt number distribution in an enclosed impinging jet arrays, where each jet function independently and where jets can be transformed from inlets to outlets, leading to a vast number of possible flow arrangements. While computational fluid dynamics (CFD) simulations can model heat transfer with high fidelity, their cost prohibits real-time application such as model-based temperature control. To address this, we generate a CNN-based surrogate model that can predict the Nusselt distribution in real time. We train it with data from implicit large eddy computational fluid dynamics simulations (Re < 2,000). We train two distinct models, one for a five by one array of jets (83 simulations) and one for a three by three array of jets (100 simulations). We introduce a method to extrapolate predictions to higher Reynolds numbers (Re < 10,000) using a correlation-based scaling. The surrogate models achieve high accuracy, with a normalized mean average error below 2% on validation data for the five by one surrogate model and 0.6% for the three by three surrogate model. Experimental validation confirms the model's predictive capabilities. This work provides a foundation for model-based control strategies in advanced thermal management applications.

physics.flu-dyn↗

arXiv2024

Robust pore-resolved CFD through porous monoliths reconstructed by micro-computed tomography: From digitization to flow prediction

Porous media are ubiquitous in energy storage and conversion, catalysis, biomechanics, hydrogeology, as well as many other fields. These materials possess high surface-to-volume ratios and their complex channels can restrict and guide the flow. However, optimizing design parameters for specific applications remains challenging due to the intricate structure of porous media. Pore-resolved CFD reveals the effects of their structure on flow characteristics, but is limited by the performance of mesh generation algorithms for such complex geometries. To alleviate this issue, we use a sharp immersed boundary method which enables usage of Cartesian, non-conformal grids, within a massively parallel finite element framework. This method preserves the order convergence of the scheme and allows for adaptive mesh refinement (AMR). We introduce a radial basis function-based representation of solids that allows to solve the flow through complex geometries with precision. We verify the method using the method of manufactured solutions. We validate it using pressure drop measurements through porous silicone monoliths digitized by X-ray computed microtomography, for pore Reynolds numbers up to 30. Simulations are conducted using grids of 200M cells distributed over 8k cores, which would require 16 times more cells without AMR. Results reveal that pore network structure is the principal factor describing pressure evolution and that preferential channels are dominant at this scale. In this work, we demonstrate a robust and efficient workflow for pore-resolved simulations of porous monoliths. This work bridges the gap between sub-millimetric flow and macroscopic properties, which will open the door to design and optimize processes through the usage of physics-based digital twins of complex porous media.

physics.flu-dyn↗

arXiv2024

CFD-DEM study of mixing in a monodispersed solid-liquid fluidized bed

In this work, we assess the internal dynamics of particles in liquid-solid fluidized beds using an unresolved CFD-DEM model. We use the Nearest Neighbors Method (NNM) and the mixing index based on the principal component analysis proposed by Doucet et al. [1] to quantify the bed mixing for several flow regimes and particle properties. Discussions on the advantages and drawbacks of each method are provided. Using results for several inlet flow rates, we show that the dimensionless mixing time reaches a plateau and does not increase significantly with the inlet velocity. The principal component analysis shows that the studied fluidized bed has no preferential mixing component. Additionally, we show that, except for the sliding friction coefficient, the collision properties have almost negligible influence on the mixing behavior.

physics.flu-dyn↗

arXiv2022

Towards High-Order CFD-DEM: Development and Validation

CFD-DEM is used to simulate solid-fluid systems. DEM models the motion of discrete particles while CFD models the fluid phase. Coupling both necessitates the calculation of the void fraction and the solid-fluid forces resulting in a computationally expensive method. Additionally, evaluating volume-averaged quantities locally restricts particle to cell size ratios limiting the accuracy of the CFD. To mitigate these limitations, we develop a monolithic finite element CFD-DEM solver which supports dynamically load-balanced parallelization. This allows for more stable, accurate and time efficient simulations as load balancing ensures the even distribution of workloads among processors; thus, exploiting available resources efficiently. Our solver also supports high order schemes; thus, allowing the use of larger elements enhancing the validity and stability of the void fraction schemes while achieving better accuracy. We verify and validate our CFD-DEM solver with a large array of test cases: the Rayleigh Taylor instability, particle sedimentation, a fluidized bed, and a spouted bed.

physics.flu-dyn↗

arXiv2022

An implicit large-eddy simulation perspective on the flow over periodic hills

The periodic hills simulation case is a well-established benchmark for computational fluid dynamics solvers due to its complex features derived from the separation of a turbulent flow from a curved surface. We study the case with the open-source implicit large-eddy simulation (ILES) software Lethe. Lethe solves the incompressible Navier-Stokes equations by applying a stabilised continuous finite element discretisation. The results are validated by comparison to experimental and computational data available in the literature for Re = 5600. We study the effect of the time step, averaging time, and global mesh refinement. The ILES approach shows good accuracy for average velocities and Reynolds stresses using less degrees of freedom than the reference numerical solution. The time step has a greater effect on the accuracy when using coarser meshes, while for fine meshes the results are rapidly time-step independent when using an implicit time-stepping approach. A good prediction of the reattachment point is obtained with several meshes and this value approaches the experimental benchmark value as the mesh is refined. We also run simulations at Reynolds equal to 10600 and 37000 and observe promising results for the ILES approach.

physics.flu-dyn↗

arXiv2022

A High Order Stabilized Solver for the Volume Averaged Navier-Stokes Equations

The Volume-Averaged Navier-Stokes equations are used to study fluid flow in the presence of fixed or moving solids such as packed or fluidized beds. We develop a high-order finite element solver using both forms A and B of these equations. We introduce tailored stabilization techniques to prevent oscillations in regions of sharp gradients, to relax the Ladyzhenskaya-Babuska-Brezzi inf-sup condition, and to enhance the local mass conservation and the robustness of the formulation. We calculate the void fraction using the Particle Centroid Method. Using different drag models, we calculate the drag force exerted by the solids on the fluid. We implement the method of manufactured solution to verify our solver. We demonstrate that the model preserves the order of convergence of the underlying finite element discretization. Finally, we simulate gas flow through a randomly packed bed and study the pressure drop and mass conservation properties to validate our model.

math.NA↗

arXiv2021

Lethe-DEM : An open-source parallel discrete element solver with load balancing

Approximately $75 \%$ of the raw material and $50 \%$ of the products in the chemical industry are granular materials. The Discrete Element Method (DEM) provides detailed insights of phenomena at particle scale and it is therefore often used for modeling granular materials. However, because DEM tracks the motion and contact of individual particles separately, its computational cost increases non-linearly $O(n_p\log(n_p))$ -- $O(n_p^2)$ depending on the algorithm) with the number of particles ($n_p$). In this article, we introduce a new open-source parallel DEM software with load balancing: Lethe-DEM. Lethe-DEM, a module of Lethe, consists of solvers for two-dimensional and three-dimensional DEM simulations. Load-balancing allows Lethe-DEM to significantly increase the parallel efficiency by $\approx 25 - 70 \%$ depending on the granular simulation. We explain the fundamental modules of Lethe-DEM, its software architecture, and the governing equations. Furthermore, we verify Lethe-DEM with several tests including analytical solutions and comparison with other software. Comparisons with experiments in a flat-bottomed silo, wedge-shaped silo, and rotating drum validate Lethe-DEM. We investigate the strong and weak scaling of Lethe-DEM with $1 \leq n_c \leq 192$ and $32 \leq n_c \leq 320$ processes, respectively, with and without load-balancing. The strong-scaling analysis is performed on the wedge-shaped silo and rotating drum simulations, while for the weak-scaling analysis, we use a dam break simulation. The best scalability of Lethe-DEM is obtained in the range of $5000 \leq n_p/n_c \leq 15000$. Finally, we demonstrate that large scale simulations can be carried out with Lethe-DEM using the simulation of a three-dimensional cylindrical silo with $n_p=4.3 \times 10^6$ on 320 cores.

cond-mat.mtrl-sci↗