arXiv subjects

Brigitte Schmieder

Publications and source records attributed to Brigitte Schmieder.

At least 55 records · Page 3Linked to original sources

arXiv2022

Extreme-Ultraviolet Wave and Accompanying Loop Oscillations

We present the observations of an extreme-ultraviolet (EUV) wave, which originated from the active region (AR) NOAA 12887 on 28 October 2021 and its impact on neighbouring loops. The event was observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO) satellite at various wavebands and by the Solar TErrestrial RElations Observatory-Ahead (STEREO-A) with its Extreme-Ultraviolet Imager (EUVI) and COR1 instruments with a different view angle than SDO. We show that the EUV wave event consists of several waves as well as non-wave phenomena. The wave components include: the fast-mode part of the EUV wave event, creation of oscillations in nearby loops, and the appearance of wave trains. The non-wave component consists of stationary fronts. We analyze selected oscillating loops and find that the periods of these oscillations range from 230 - 549 s. Further, we compute the density ratio inside and outside the loops and the magnetic field strength. The computed density ratio and magnetic field are found in the range of 1.08 - 2.92 and 5.75 - 8.79 G, respectively. Finally, by combining SDO and STEREO-A observations, we find that the observed EUV wave component propagates ahead of the CME leading edge.

astro-ph.SR↗

arXiv2022

Analysis of the Evolution of a Multi-Ribbon Flare and Failed Filament Eruption

How filaments form and erupt are topics about which solar researchers have wondered since more than a century and that are still open to debate. We present observations of a filament formation, its failed eruption, and the associated flare (SOL2019-05-09T05:51) that occurred in active region (AR) 12740 using data from SDO, STEREO-A, IRIS, and NSO/GONG. AR 12740 was a decaying region formed by a very disperse following polarity and a strong leading spot, surrounded by a highly dynamic zone where moving magnetic features (MMFs) were seen constantly diverging from the spot. Our analysis indicates that the filament was formed by the convergence of fibrils at a location where magnetic flux cancellation was observed. Furthermore, we conclude that its destabilization was also related to flux cancellation associated to the constant shuffling of the MMFs. A two-ribbon flare occurred associated to the filament eruption; however, because the large-scale magnetic configuration of the AR was quadrupolar, two additional flare ribbons developed far from the two main ones. We model the magnetic configuration of the AR using a force-free field approach at the AR scale size. This local model is complemented by a global potential-field source-surface one. Based on the local model, we propose a scenario in which the filament failed eruption and flare are due to two reconnection processes, one occurring below the erupting filament, leading to the two-ribbon flare, and another one above it between the filament flux-rope configuration and the large-scale closed loops. Our computation of the reconnected magnetic flux added to the erupting flux rope, compared to that of the large-scale field overlying it, lets us conclude that the latter was large enough to prevent the filament eruption. A similar conjecture can be drawn from the computation of the magnetic tension derived from the global field model.

astro-ph.SR↗

arXiv2022

Chromospheric recurrent jets in a sunspot group and their inter-granular origin

We report on high resolution observations of recurrent fan-like jets by the Goode Solar telescope (GST) in multi-wavelengths inside a sunspot group. The dynamics behaviour of the jets is derived from the Ha line profiles. Quantitative values for one well-identified event have been obtained showing a maximum projected velocity of 42 km s^-1 and a Doppler shift of the order of 20 km s^-1. The footpoints/roots of the jets have a lifted center on the Ha line profile compared to the quiet sun suggesting a long lasting heating at these locations. The magnetic field between the small sunspots in the group shows a very high resolution pattern with parasitic polarities along the inter-granular lanes accompanied by high velocity converging flows (4 km s^-1) in the photosphere. Magnetic cancellations between the opposite polarities are observed in the vicinity of the footpoints of the jets. Along the inter-granular lanes horizontal magnetic field around 1000 Gauss is generated impulsively. Overall, all the kinetic features at the different layers through photosphere and chromosphere favor a convection-driven reconnection scenario for the recurrent fan-like jets, and evidence a site of reconnection between the photosphere and chromosphere corresponding to the inter-granular lanes.

astro-ph.SR↗

arXiv2022

Prominence Oscillations activated by an EUV wave

Prominence oscillations are one of interesting phenomena in the solar atmosphere, which can be utilized to infer the embedded magnetic field magnitude. We present here the transverse oscillations of two different prominences located at the East solar limb on 2011 February 11 using the multi-wavebands data of the Atmospheric Imaging Assembly (AIA) on-board the Solar Dynamics Observatory (SDO) satellite. A prominence eruption was observed towards the east direction with an average speed of ~275 km/s. The eruption is fitted with the combination of a linear and an exponential functions of time. An extreme ultraviolet (EUV) wave event was associated with the prominence eruption. This EUV wave triggered the oscillations of both prominences on the East limb. We computed the period of each prominence using the wavelet analysis method. The oscillation period varies from 14 to 22 min. The magnetic field of the prominences was derived, which ranges from 14 to 20 G.

astro-ph.SR↗

arXiv2022

First High Resolution Interferometric Observation of a Solar Prominence With ALMA

We present the first observation of a solar prominence at $84-116$ GHz using the high resolution interferometric imaging of ALMA. Simultaneous observations in H$α$ from Białkaw Observatory and with SDO/AIA reveal similar prominence morphology to the ALMA observation. The contribution functions of 3 mm and H$α$ emission are shown to have significant overlap across a range of gas pressures. We estimate the maximum millimetre-continuum optical thickness to be $τ_\mathrm{3mm}\approx 2$, and the brightness temperature from the observed H$α$ intensity. The brightness temperature measured by ALMA is $\sim 6000-7000$ K in the prominence spine, which correlates well with the estimated brightness temperature for a gas temperature of 8000 K.

astro-ph.SR↗

arXiv2022

Solar jets: SDO and IRIS observations in the perspective of new MHD simulations

Solar jets are observed as collimated plasma beams over a large range of temperatures and wavelengths. They have been observed in Halpha and optical lines for more than 50 years and called surges. The term "jet" comes from X-ray observations after the launch of the Yohkoh satellite in 1991. They are the means of transporting energy through the heliosphere and participate to the corona heating and the acceleration of solar wind. Several characteristics have been derived about their velocities, their rates of occurrence, and their relationship with CMEs. However, the initiation mechanism of jets, e.g. emerging flux, flux cancellation, or twist, is still debated. In the last decade coordinated observations of the Interface Region Imaging Spectrograph (IRIS) with the instruments on board the Solar Dynamic Observatory (SDO) allow to make a step forward for understanding the trigger of jets and the relationship between hot jets and cool surges. We observe at the same time the development of 2D and 3D MHD numerical simulations to interpret the results. This paper summarizes recent studies of jets showing the loci of magnetic reconnection in null points or in bald patch regions forming a current sheet. In the pre-jet phase a twist is frequently detected by the existence of a mini filament close to the dome of emerging flux. The twist can also be transferred to the jet from a flux rope in the vicinity of the reconnection by slippage of the polarities. Bidirectional flows are detected at the reconnection sites. We show the role of magnetic currents detected in the footprints of flux rope and quasi-separatrix layers for initiating the jets. We select a few studies and show that with the same observations, different interpretations are possible based on different approaches e.g. non linear force free field extrapolation or 3D MHD simulation.

astro-ph.SR↗

arXiv2021

Empirical atmosphere model in a mini flare during magnetic reconnection

A spatio-temporal analysis of IRIS spectra of MgII, CII, and SiIV ions allows us to study the dynamics and the stratification of the flare atmosphere along the line of sight during the magnetic reconnection phase at the jet base. Strong asymmetric MgII and CII line profiles with extended blue wings observed at the reconnection site are interpreted by the presence of two chromospheric temperature clouds: one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Doppler shift (around 36 km/s). Simultaneously at the same location a mini flare was observed with strong emission in multi temperatures (AIA), in several spectral IRIS lines (e.g. Oiv and Siiv, Mgii), absorption of identified chromospheric lines in Siiv line profile, enhancement of the Balmer continuum and X-ray emission by FERMI/GBM. With the standard thick-target flare model we calculate the energy of non thermal electrons observed by FERMI and compare it to the energy radiated by the Balmer continuum emission. We show that the low energy input by non thermal electrons above 20 keV was still sufficient to produce the excess of Balmer continuum.

astro-ph.SR↗

arXiv2021

Solar jets observed with the Interface Region Imaging Spectrograph (IRIS)

Solar jets are impulsive, collimated plasma ejections that are triggered by magnetic reconnection. They are observed for many decades in various temperatures and wavelengths, therefore their kinematic characteristics, such as velocity and recurrence, have been extensively studied.Nevertheless, the high spatial resolution of the Interface Region Imaging Spectrograph (IRIS) launched in 2013 allowed us to make a step forward in the understanding of the relationship between surges and hot jets. In this paper we report on several results of recent studies of jets observed by IRIS. Cool and hot plasma have been detected with ejections of cool blobs having a speed reaching 300 km/s during the impulsive phase of jet formation and slow velocity surges surrounding hot jets after the reconnection phase. Plasma characteristics of solar jets, such as the emission measure, temperature, and density have been quantified. A multi-layer atmosphere at the reconnection site based on observed IRIS spectra has been proposed. IRIS evidenced bidirectional flows at reconnection sites, and tilt along the spectra which were interpreted as the signature of twist in jets. The search of possible sites for reconnection could be achieved by the analysis of magnetic topology. Combining Solar Dynamics Observatory/Helioseismic Magnetic Imager (SDO/HMI) vector magnetograms and IRIS observations, it was found that reconnection site could be located at null points in the corona as well as in bald patch regions low in the photosphere. In one case study a magnetic sketch could explain the initiation of a jet starting in a bald patch transformed to a current sheet in a dynamical way, and the transfer of twist from a flux rope to the jet during the magnetic reconnection process.

astro-ph.SR↗

arXiv2021

Filament Eruption Driving EUV Loop Contraction then Expansion above a Stable Filament

We analyze the observations of EUV loop evolution associated with the filament eruption located at the border of an active region. The event SOL2013-03-16T14:00 was observed with a large difference of view point by the Solar Dynamics Observatory and Solar Terrestrial Relations Observatory --A spacecraft. The filament height is fitted with the sum of a linear and exponential function. These two phases point to different physical mechanisms such as: tether-cutting reconnection and a magnetic instability. While no X-ray emission is reported, this event presents the classical eruption features like: separation of double ribbons and the growth of flare loops. We report the migration of the southern foot of the erupting filament flux rope due to the interchange reconnection with encountered magnetic loops of a neighbouring AR. Parallel to the erupting filament, a stable filament remains in the core of active region. The specificity of this eruption is that coronal loops, located above the nearly joining ends of the two filaments, first contract in phase, then expand and reach a new stable configuration close to the one present at the eruption onset. Both contraction and expansion phases last around 20 min. The main difference with previous cases is that the PIL bent about 180 deg around the end of the erupting filament because the magnetic configuration is at least tri-polar. These observations are challenging for models which interpreted previous cases of loop contraction within a bipolar configuration. New simulations are required to broaden the complexity of the configurations studied.

astro-ph.SR↗

arXiv2021

Balmer continuum enhancement detected in a mini flare observed with IRIS

Optical and near-UV continuum emissions in flares contribute substantially to flare energy budget. Two mechanisms play an important role for continuum emission in flares: hydrogen recombination after sudden ionization at chromospheric layers and transportation of the energy radiatively from the chromosphere to lower layers in the atmosphere, the so called back-warming. The aim of the paper is to disentangle between these two mechanisms for the excess of Balmer continuum observed in a flare. Methods. We combine the observations of Balmer continuum obtained with IRIS (spectra and SJIs 2832 A) and hard X-ray (HXR) emission detected by FERMI Gamma Burst Monitor (GBM) during a mini flare. Calibrated Balmer continuum is compared to non-LTE radiative transfer flare models and radiated energy is estimated. Assuming thick target HXR emission, we calculate the energy of non-thermal electrons detected by FERMI GBM and compare it to the radiated energy. The favorable argument of a relationship between the Balmer continuum excess and the HXR emission is that there is a good time coincidence between both of them. In addition, the shape of the maximum brightness in the 2832 SJIs, which is mainly due to this Balmer continuum excess, is similar to the FERMI/GBM light curve. The electron-beam flux estimated from FERMI/GBM is consistent with the beam flux required in non-LTE radiative transfer models to get the excess of Balmer continuum emission observed in the IRIS spectra. The low energy input by non thermal electrons above 20 keV is sufficient to produce the enhancement of Balmer continuum emission. This could be explained by the topology of the reconnection site. The reconnection starts in a tiny bald patch region which is transformed dynamically in a X-point current sheet. The size of the interacting region would be under the spatial resolution of the instrument.

astro-ph.SR↗

arXiv2021

Solar prominence diagnostics from non-LTE modelling of Mgii h&k line profiles

Aims: We investigate a new method to for obtaining the plasma parameters of solar prominences observed in the Mgii h&k spectral lines by comparing line profiles from the IRIS satellite to a bank of profiles computed with a one-dimensional non-local thermodynamic equilibrium (non-LTE) radiative transfer code. Methods: Using a grid of 1007 one-dimensional non-LTE radiative transfer models we carry out this new method to match computed spectra to observed line profiles while accounting for line core shifts not present in the models. The prominence observations were carried out by the IRIS satellite on 19 April 2018. Results: The prominence is very dynamic with many flows. The models are able to recover satisfactory matches in areas of the prominence where single line profiles are observed. We recover: mean temperatures of 6000 to 50,000K; mean pressures of 0.01 to 0.5 dyne cm$^{-2}$; column masses of 3.7$\times10^{-8}$ to 5$\times10^{-4}$ g cm$^{-2}$; a mean electron density of 7.3$\times10^{8}$ to 1.8$\times10^{11}$ cm$^{-3}$; and an ionisation degree ${n_\text{HII}}/{n_\text{HI}}=0.03 - 4500$. The highest values for the ionisation degree are found in areas where the line of sight crosses mostly plasma from the PCTR, correlating with high mean temperatures and correspondingly no H$α$ emission. Conclusions: This new method naturally returns information on how closely the observed and computed profiles match, allowing the user to identify areas where no satisfactory match between models and observations can be obtained. Regions where satisfactory fits were found were more likely to contain a model encompassing a PCTR. The line core shift can also be recovered from this new method, and it shows a good qualitative match with that of the line core shift found by the quantile method. This demonstrates the effectiveness of the approach to line core shifts in the new method.

astro-ph.SR↗

arXiv2021

Spectro-imagery of an active tornado-like prominence: formation and evolution

The nature of flows in tornado-prominences is an open issue. While the AIA imager aboard the Solar Dynamics Observatory (SDO) allowed us to follow the global structure of a tornado-like prominence during five hours, the Interface Region Imaging Spectrograph (IRIS), and the Multi subtractive Double pass spectrograph (MSDP) permitted to obtain plasma diagnostics of its fine structures. We aim to address two questions. Is the observed plasma rotation conceptually acceptable in a flux rope magnetic support configuration with dips? How is the plasma density distributed in the tornado-like prominence? We calculated line-of-sight velocities and non-thermal line widths using Gaussian fitting for Mg II lines and bisector method for H-alpha line. We determined the electron density from Mg II line integrated intensities and profile fitting methods using 1D NLTE radiative transfer theory models. The global structure of the prominence observed in H-alpha, and Mg II h and k lines fits with a magnetic field structure configuration with dips. Coherent Dopplershifts in red- and blue-shifted areas observed in both lines were detected along rapidly-changing vertical and horizontal structures. However, the tornado at the top of the prominence consists of multiple-fine threads with opposite flows suggesting counter streaming flows rather than rotation. Surprisingly we found that the electron density at the top of the prominence could be larger (10^11 cm^{-3}) than in the inner part of the prominence. We suggest that the tornado is in a formation state with cooling of hot plasma in a first phase, and following that, a phase of leakage of the formed blobs with large transverse flows of material along long loops extended away of the UV prominence top. The existence of such long magnetic field lines on both sides of the prominence would avoid the tornado-like prominence to really turn around its axis.

astro-ph.SR↗

arXiv2021

Observations of a prominence eruption and loop contraction

Context. Prominence eruptions provide key observations to understand the launch of coronal mass ejections as their cold plasma traces a part of the unstable magnetic configuration. Aims. We select a well observed case to derive observational constraints for eruption models. Methods. We analyze the prominence eruption and loop expansion and contraction observed on 02 March 2015 associated with a GOES M3.7 class flare (SOL2015-03-02T15:27) using the data from Atmospheric Imaging Assembly (AIA) and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI). We study the prominence eruption and the evolution of loops using the time-distance techniques. Results. The source region is a decaying bipolar active region where magnetic flux cancellation is present for several days before the eruption. AIA observations locate the erupting prominence within a flux rope viewed along its local axis direction. We identify and quantify the motion of loops in contraction and expansion located on the side of the erupting flux rope. Finally, RHESSI hard X-ray observations identify the loop top and two foot-point sources. Conclusions. Both AIA and RHESSI observations support the standard model of eruptive flares. The contraction occurs 19 minutes after the start of the prominence eruption indicating that this contraction is not associated with the eruption driver. Rather, this prominence eruption is compatible with an unstable flux rope where the contraction and expansion of the lateral loop is the consequence of a side vortex developing after the flux rope is launched.

astro-ph.SR↗

arXiv2020

Imaging evidence for solar wind outflows originating from a CME footpoint

We report on the Atmospheric Imaging Assembly (AIA) observations of plasma outflows originating in a coronal dimming during the 2015 April 28th filament eruption. After the filament started to erupt, two flare ribbons formed, one of which had a well-visible hook enclosing a core (twin) dimming region. Along multiple funnels located in this dimming, a motion of plasma directed outwards started to be visible in the 171 and 193 filter channels of the instrument. In time-distance diagrams, this motion generated a strip-like pattern, which lasted for more than five hours and which characteristics did not change along the funnel. We therefore suggest the motion to be a signature of outflows corresponding to velocities ranging between $\approx70$ and 140 km s$^{-1}$. Interestingly, the pattern of the outflows as well as their velocities were found to be similar to those we observed in a neighboring ordinary coronal hole. Therefore, the outflows were most likely a signature of a CME-induced slow solar wind flowing along the open-field structures rooted in the dimming region. Further, the evolution of the hook encircling the dimming region was examined in the context of the latest predictions imposed for the three-dimensional magnetic reconnection. The observations indicate that the filament's footpoints were, during their transformation to the dimming region, reconnecting with surrounding canopies. To our knowledge, our observations present the first imaging evidence for outflows of plasma from a dimming region.

astro-ph.SR↗

arXiv2020

Multi thermal atmosphere of a mini solar flare during magnetic reconnection observed with IRIS

The Interface Region Imaging Spectrograph(IRIS) with its high spatial and temporal resolution brings exceptional plasma diagnostics of solar chromospheric and coronal activity during magnetic reconnection. The aim of this work is to study the fine structure and dynamics of the plasma at a jet base forming a mini flare between two emerging magnetic fluxes (EMFs) observed with IRIS and the Solar Dynamics Observatory (SDO) instruments. We proceed to a spatio-temporal analysis of IRIS spectra observed in the spectral ranges of Mg II, C II, and Si IV ions. Doppler velocities from Mg II lines are computed by using a cloud model technique. Strong asymmetric Mg II and C II line profiles with extended blue wings observed at the reconnection site (jet base) are interpreted by the presence of two chromospheric temperature clouds, one explosive cloud with blueshifts at 290 km/s and one cloud with smaller Dopplershift (around 36 km/s). Simultaneously at the same location (jet base), strong emission of several transition region lines (e.g. O IV and Si IV), emission of the Mg II triplet lines of the Balmer-continuum and absorption of identified chromospheric lines in Si IV broad profiles have been observed and analysed. Such observations of IRIS line and continuum emissions allow us to propose a stratification model for the white-light mini flare atmosphere with multiple layers of different temperatures along the line of sight, in a reconnection current sheet. It is the first time that we could quantify the fast speed (possibly Alfvénic flows) of cool clouds ejected perpendicularly to the jet direction by using the cloud model technique. We conjecture that the ejected clouds come from plasma which was trapped between the two EMFs before reconnection or be caused by chromospheric-temperature (cool) upflow material like in a surge, during reconnection

astro-ph.SR↗

arXiv2020

The role of small-scale surface motions in the transfer of twist to a solar jet from a remote stable flux rope

Jets often have a helical structure containing ejected plasma that is both hot and also cooler and denser than the corona. Various mechanisms have been proposed to explain how jets are primarily attributed to a magnetic reconnection between the emergence of magnetic flux and environment or that of twisted photospheric motions that bring the system into a state of instability. Multi-wavelength observations of a twisted jet observed with AIA and IRIS were used to understand how the twist was injected into the jet. We followed the magnetic history of the active region based on the analysis of HMI vector magnetic field computed with the UNNOFIT code. This region is the result of the collapse of two emerging magnetic fluxes (EMFs) overlaid by arch filament systems that have been well-observed with AIA, IRIS, and NVST in H-alpha. In the magnetic field maps, we found evidence of the pattern of a long sigmoidal flux rope (FR) along the polarity inversion line between the two EMFs, which is the site of the reconnection. Before the jet, an extension of the FR was present and a part of it was detached and formed a small bipole with a bald patch (BP) region, which dynamically became an X-current sheet over the dome of one EMF where the reconnection took place. At the time of the reconnection, the Mg II spectra exhibited a strong extension of the blue wing that is decreasing over a distance of 10 Mm (from -300 km/s to a few km/s). This is the signature of the transfer of the twist to the jet. A comparison with numerical magnetohydrodynamics (MHD) simulations confirms the existence of the long FR. We conjecture that there is a transfer of twist to the jet during the extension of the FR to the reconnection site without FR eruption. There connection would start in the low atmosphere in the BP reconnection region and extend at an X-point along the current sheet formed above.

astro-ph.SR↗

arXiv2020

A case-study of multi-temperature coronal jets for emerging flux MHD models

Context: Hot coronal jets are a basic observed feature of the solar atmosphere whose physical origin is still being actively debated. Aims: We study six recurrent jets occurring in the active region NOAA 12644 on April 04, 2017. They are observed in all the hot filters of AIA as well as cool surges in IRIS slit-jaw high spatial and temporal resolution images. Methods: The AIA filters allow us to study the temperature and the emission measure of the jets using the filter ratio method. We study the pre-jet phases by analyzing the intensity oscillations at the base of the jets with the wavelet technique. Results: A fine co-alignment of the AIA and IRIS data shows that the jets are initiated at the top of a canopy-like, double-chambered structure with cool emission on one side and hot emission in the other. The hot jets are collimated in the hot temperature filters, have high velocities (around 250 km/s) and accompanied by the cool surges and ejected kernels both moving at about 45 km/s. In the pre-phase of the jets, at their base we find quasi-periodic intensity oscillations in phase with small ejections; they have a period between 2 and 6 minutes and are reminiscent of acoustic or MHD waves. Conclusions: This series of jets and surges provides a good case-study to test the 2D and 3D magnetohydrodynamic (MHD) models that result from magnetic flux emergence. The double-chambered structure found in the observations corresponds to the cold and hot loop regions found in the models beneath the current sheet that contains the reconnection site. The cool surge with kernels is comparable with the cool ejection and plasmoids that naturally appear in the models.

astro-ph.SR↗

arXiv2020

Electric current evolution at the footpoints of solar eruptions

Electric currents play a critical role in the triggering of solar flares and their evolution. The aim of the present paper is to test whether the surface electric current has a surface or subsurface fixed source as predicts the circuit approach of flare physics, or is the response of the surface magnetic field to the evolution of the coronal magnetic field as the MHD approach proposes. Out of all 19 X-class flares as observed by SDO from 2011 to 2016 near the disk center, we analyzed the only 9 eruptive flares for which clear ribbon-hooks were identifiable. Flare ribbons with hooks are considered to be the footprints of eruptive flux ropes in MHD flare models. For the first time, fine measurements of time-evolution of electric currents inside the hooks in the observations as well as in the OHM 3D MHD simulation are performed. Our analysis shows a decrease of the electric current in the area surrounded by the ribbon hooks during and after the eruption. We interpret the decrease of the electric currents as due to the expansion of the flux rope in the corona during the eruption. Our analysis brings a new contribution to the standard flare model in 3D.

astro-ph.SR↗