arXiv Science⌕ Search

arXiv subjects

Boxiang Wang

Publications and source records attributed to Boxiang Wang.

At least 19 recordsLinked to original sources
arXiv2026

Direction-Preserving Active Noise Control with a Conditional Control-Filter Estimation Network

Conventional active noise control (ANC) minimizes the total disturbance at the error microphone without distinguishing desired sound from noise. Direction-preserving ANC (DP-ANC) instead aims to attenuate a noise component arriving from a direction other than the specified desired direction while preserving sound naturally arriving from that direction. Existing approaches typically either require analytical optimization to be repeated for each new observation or estimate and reproduce the desired component through a hear-through secondary-source path. To address these limitations, this paper formulates DP-ANC as a direction-conditioned cancellation-preservation optimization problem. A component-separated objective jointly penalizes residual noise energy and the control response induced by the desired component, with a scalar weighting parameter controlling the cancellation-preservation trade-off. A convolutional network conditioned on the specified desired direction through feature-wise linear modulation (FiLM) is trained using a differentiable secondary-path-aware forward model. At deployment, the network estimates the complete multichannel finite impulse response (FIR) control-filter bank directly from a mixed-reference observation and the specified desired direction in a single forward pass, while retaining the conventional feedforward ANC signal path. Over 3300 evaluation cases, the selected operating point achieves 22.8 dB mean noise reduction with a desired-signal distortion of -11.4 dB. Validation using measured in-ear-device transfer functions further demonstrates consistent performance under measured acoustic configurations.

eess.AS↗
arXiv2026

Deep Learning-Based Active Trim Panels for Enhanced Aircraft Interior Noise Control

Active noise control (ANC) trim panels offer an effective solution to suppress multi-tonal noise in aircraft. The selective fixed-filter ANC (SFANC) method, characterized by low computational complexity, high robustness and rapid response, is suitable to handle multi-tonal engine noise that varies in frequency due to changes in the rotational speed of the engine shaft. However, real-world conditions introduce variations in lining temperature, altering acoustic and structural paths and degrading noise reduction performance. To address this challenge, a temperature-perceptive SFANC (TP-SFANC) approach is proposed that employs a lightweight one-dimensional convolutional neural network (1D CNN) trained using a multi-task learning strategy. By processing both reference and error signals, the 1D CNN learns frequency and temperature characteristics to dynamically select the optimal control filter. Numerical simulations demonstrate the effectiveness of the proposed method in attenuating multi-tonal noise across varying frequencies and lining temperatures.

eess.AS↗
arXiv2026

Adaptive Momentum Enhanced Distributed Multichannel Active Noise Control for Faster Convergence under Communication Delays

Distributed multichannel active noise control (DMCANC) reduces the computational burden of centralized ANC systems by distributing processing tasks across multiple nodes, while requiring information exchange to achieve satisfactory global noise reduction. To improve robustness under communication delays, the auto-shrink step size mixed-gradients filtered reference LMS (ASSS-MGDFxLMS) algorithm has been proposed. However, the reduced step size inevitably slows convergence. In this work, an adaptive momentum term is introduced to accelerate convergence, where cosine similarity is used to evaluate the alignment between the instantaneous gradient and the momentum component and dynamically adjust the momentum parameter. This design accelerates convergence when the directions are consistent while preserving stability under delayed communication. Simulation results demonstrate that the proposed adaptive momentum ASSS-MGDFxLMS (AMAS-MGDFxLMS) algorithm achieves faster convergence than ASSS-MGDFxLMS while maintaining stable and effective noise reduction performance.

eess.AS↗
arXiv2026

Spatial-Frequency Cued Generative Fixed-Filter Active Noise Control Based on Deep Learning in Reverberant Environments

Generative fixed-filter active noise control (GFANC) effectively attenuates noise with diverse frequency characteristics through the combination of sub control filters. However, it does not incorporate the spatial information of the noise source, which limits its performance, particularly in reverberant environments. To address this limitation, this paper proposes a novel spatial-frequency cued GFANC (SF-GFANC) method that exploits both three-dimensional (3D) spatial and frequency information of the noise source. Specifically, a multi-task convolutional recurrent neural network (CRNN) is designed to estimate the source distance, elevation angle, and azimuth angle as spatial cues, while predicting the combination weights of sub control filters as frequency cues. These spatial-frequency cues jointly guide the generation of the appropriate control filter. In addition, a theoretical analysis of the optimal control filter in reverberant environments is presented, highlighting the importance of 3D spatially conditioned control filter design. Evaluations using both simulated and measured acoustic paths demonstrate that the CRNN is robust to unseen acoustic environments and noise types. Furthermore, the results confirm that SF-GFANC outperforms representative ANC algorithms when handling noise sources across diverse 3D locations and frequency characteristics in reverberant environments.

eess.AS↗
arXiv2026

SOAP, Muon, and Beyond: Pushing LLM Pretraining Scales

Higher-order optimizers such as Muon and SOAP offer faster convergence than AdamW, but their computational cost and numerical stability challenges have limited adoption at scale. In this work, we adapt and enhance preconditioned gradient methods to overcome the practical challenges of large-scale LLM pretraining. We first identify instabilities in SOAP at large batch sizes and propose algorithmic modifications including per-step QR orthogonalization and improved preconditioning strategies that eliminate loss spikes and enable stable training in these regimes. We then present a unified empirical study of SOAP, Muon, and AdamW using update-RMS matching to ensure fair learning rate transfer across optimizers. As part of this analysis, we empirically evaluate the orthogonalization quality of Muon. Our experiments on multi-billion-parameter models trained on trillions of tokens reveal that SOAP and Muon consistently outperform AdamW at the scales we tested. Notably, at batch sizes of up to 100M tokens for next-token prediction, these optimizers maintain training stability and quality while AdamW degrades. To enable efficient training at large scale, we introduce a layer-wise distributed optimizer compatible with Megatron-LM. Our implementation balances memory and hides communication while avoiding approximations to the optimizer computations, thus retaining their convergence benefits. Additionally, we identify and build specific system-level improvements to further accelerate our layer-wise implementation. To support the research community, we release a codebase that contains emerging algorithms for optimization: https://github.com/NVIDIA-NeMo/Emerging-Optimizers

cs.LG↗
arXiv2026

TorchKM: A GPU-Oriented Library for Kernel Learning and Model Selection

TorchKM is an open-source library for kernel machines, including support vector machines, kernel logistic regression, and kernel quantile regression, with GPU acceleration. The library features a scikit-learn-style API and is designed to exploit GPU-friendly linear algebra, accelerating the full training and model-selection pipeline through intelligent reuse of matrix operations. Benchmarks show competitive predictive performance with substantial speedups over standard baselines. The efficiency and programmable design also make TorchKM a kernel-learning component for AI-driven workflows. Code and documentation are available at https://github.com/YikaiZhang95/torchkm, and the package can be easily installed via PyPI.

cs.LG↗
arXiv2026

Transformer-based End-to-End Control Filter Generation for Active Noise Control

To address the limitations of existing Generative Fixed-Filter Active Noise Control (GFANC) methods, which rely on filter decomposition and recombination and require supervised learning with labeled data, this paper proposes a Transformer-based End-to-End Control-Filter Generation (E2E-CFG) framework. Unlike previous approaches that predict combination weights of sub control filters, the proposed method directly generates control filters in an unsupervised manner by integrating the co-processor and real-time controller into a fully differentiable ANC system, where the accumulated error signal is used as the training objective. By abandoning the decomposition--reconstruction process, the proposed design simplifies the control pipeline and avoids error accumulation, while the Transformer architecture effectively captures global and dynamic noise characteristics through its attention mechanism. Numerical simulations on real-recorded noises demonstrate that the proposed method achieves improved noise reduction performance and adaptability to different types of noises compared with the original GFANC framework.

eess.AS↗
arXiv2026

Predictive Directional Selective Fixed-Filter Active Noise Control for Moving Sources via a Convolutional Recurrent Neural Network

Directional Selective Fixed-Filter Active Noise Control (D-SFANC) can effectively attenuate noise from different directions by selecting the suitable pre-trained control filter based on the Direction-of-Arrival (DoA) of the current noise. However, this method is weak at tracking the direction variations of non-stationary noise, such as that from a moving source. Therefore, this work proposes a Predictive Directional SFANC (PD-SFANC) method that uses a Convolutional Recurrent Neural Network (CRNN) to capture the hidden temporal dynamics of the moving noise and predict the control filter to cancel future noise. Accordingly, the proposed method can significantly improve its noise-tracking ability and dynamic noise-reduction performance. Furthermore, numerical simulations confirm the superiority of the proposed method for handling moving sources across various movement scenarios, compared to several representative ANC baselines.

eess.AS↗
arXiv2026

Distributed Multichannel Active Noise Control with Asynchronous Communication

Distributed multichannel active noise control (DMCANC) offers effective noise reduction across large spatial areas by distributing the computational load of centralized control to multiple low-cost nodes. Conventional DMCANC methods, however, typically assume synchronous communication and require frequent data exchange, resulting in high communication overhead. To enhance efficiency and adaptability, this work proposes an asynchronous communication strategy where each node executes a weight-constrained filtered-x LMS (WCFxLMS) algorithm and independently requests communication only when its local noise reduction performance degrades. Upon request, other nodes transmit the weight difference between their local control filter and the center point in WCFxLMS, which are then integrated to update both the control filter and the center point. This design enables nodes to operate asynchronously while preserving cooperative behavior. Simulation results demonstrate that the proposed asynchronous communication DMCANC (ACDMCANC) system maintains effective noise reduction with significantly reduced communication load, offering improved scalability for heterogeneous networks.

eess.AS↗
arXiv2026

A Stabilized Hybrid Active Noise Control Algorithm of GFANC and FxNLMS with Online Clustering

The Filtered-x Normalized Least Mean Square (FxNLMS) algorithm suffers from slow convergence and a risk of divergence, although it can achieve low steady-state errors after sufficient adaptation. In contrast, the Generative Fixed-Filter Active Noise Control (GFANC) method offers fast response speed, but its lack of adaptability may lead to large steady-state errors. This paper proposes a hybrid GFANC-FxNLMS algorithm to leverage the complementary advantages of both approaches. In the hybrid GFANC-FxNLMS algorithm, GFANC provides a frame-level control filter as an initialization for FxNLMS, while FxNLMS performs continuous adaptation at the sampling rate. Small variations in the GFANC-generated filter may repeatedly reinitialize FxNLMS, interrupting its adaptation process and destabilizing the system. An online clustering module is introduced to avoid unnecessary re-initializations and improve system stability. Simulation results show that the proposed algorithm achieves fast response, very low steady-state error, and high stability, requiring only one pre-trained broadband filter.

eess.AS↗
arXiv2026

Directional Selective Fixed-Filter Active Noise Control Based on a Convolutional Neural Network in Reverberant Environments

Selective fixed-filter active noise control (SFANC) is a novel approach capable of mitigating noise with varying frequency characteristics. It offers faster response and greater computational efficiency compared to traditional adaptive algorithms. However, spatial factors, particularly the influence of the noise source location, are often overlooked. Some existing studies have explored the impact of the direction-of-arrival (DoA) of the noise source on ANC performance, but they are mostly limited to free-field conditions and do not consider the more complex indoor reverberant environments. To address this gap, this paper proposes a learning-based directional SFANC method that incorporates the DoA of the noise source in reverberant environments. In this framework, multiple reference signals are processed by a convolutional neural network (CNN) to estimate the azimuth and elevation angles of the noise source, as well as to identify the most appropriate control filter for effective noise cancellation. Compared to traditional adaptive algorithms, the proposed approach achieves superior noise reduction with shorter response times, even in the presence of reverberations.

cs.SD↗
arXiv2025

DOA Estimation with Lightweight Network on LLM-Aided Simulated Acoustic Scenes

Direction-of-Arrival (DOA) estimation is critical in spatial audio and acoustic signal processing, with wide-ranging applications in real-world. Most existing DOA models are trained on synthetic data by convolving clean speech with room impulse responses (RIRs), which limits their generalizability due to constrained acoustic diversity. In this paper, we revisit DOA estimation using a recently introduced dataset constructed with the assistance of large language models (LLMs), which provides more realistic and diverse spatial audio scenes. We benchmark several representative neural-based DOA methods on this dataset and propose LightDOA, a lightweight DOA estimation model based on depthwise separable convolutions, specifically designed for mutil-channel input in varying environments. Experimental results show that LightDOA achieves satisfactory accuracy and robustness across various acoustic scenes while maintaining low computational complexity. This study not only highlights the potential of spatial audio synthesized with the assistance of LLMs in advancing robust and efficient DOA estimation research, but also highlights LightDOA as efficient solution for resource-constrained applications.

cs.SD↗
arXiv2025

Spec-Driven AI for Science: The ARIA Framework for Automated and Reproducible Data Analysis

The rapid expansion of scientific data has widened the gap between analytical capability and research intent. Existing AI-based analysis tools, ranging from AutoML frameworks to agentic research assistants, either favor automation over transparency or depend on manual scripting that hinders scalability and reproducibility. We present ARIA (Automated Research Intelligence Assistant), a spec-driven, human-in-the-loop framework for automated and interpretable data analysis. ARIA integrates six interoperable layers, namely Command, Context, Code, Data, Orchestration, and AI Module, within a document-centric workflow that unifies human reasoning and machine execution. Through natural-language specifications, researchers define analytical goals while ARIA autonomously generates executable code, validates computations, and produces transparent documentation. Beyond achieving high predictive accuracy, ARIA can rapidly identify optimal feature sets and select suitable models, minimizing redundant tuning and repetitive experimentation. In the Boston Housing case, ARIA discovered 25 key features and determined XGBoost as the best performing model (R square = 0.93) with minimal overfitting. Evaluations across heterogeneous domains demonstrate ARIA's strong performance, interpretability, and efficiency compared with state-of-the-art systems. By combining AI for research and AI for science principles within a spec-driven architecture, ARIA establishes a new paradigm for transparent, collaborative, and reproducible scientific discovery.

cs.AI↗
arXiv2025

A Robust Proactive Communication Strategy for Distributed Active Noise Control Systems

Distributed multichannel active noise control (DMCANC) systems assign the high computational load of conventional centralized algorithms across multiple processing nodes, leveraging inter-node communication to collaboratively suppress unwanted noise. However, communication overhead can undermine algorithmic stability and degrade overall performance. To address this challenge, we propose a robust communication framework that integrates adaptive-fixed-filter switching and the mixed-gradient combination strategy. In this approach, each node independently executes a single-channel filtered reference least mean square (FxLMS) algorithm while monitoring real-time noise reduction levels. When the current noise reduction performance degrades compared to the previous state, the node halts its adaptive algorithm, switches to a fixed filter, and simultaneously initiates a communication request. The exchanged information comprises the difference between the current control filter and the filter at the time of the last communication, equivalent to the accumulated gradient sum during non-communication intervals. Upon receiving neighboring cumulative gradients, the node employs a mixed-gradient combination method to update its control filter, subsequently reverting to the adaptive mode. This proactive communication strategy and adaptive-fixed switching mechanism ensure system robustness by mitigating instability risks caused by communication issues. Simulations demonstrate that the proposed method achieves noise reduction performance comparable to centralized algorithms while maintaining stability under communication constraints, highlighting its practical applicability in real-world distributed ANC scenarios.

eess.SP↗
arXiv2025

Self-Boosted Weight-Constrained FxLMS: A Robustness Distributed Active Noise Control Algorithm Without Internode Communication

Compared to the conventional centralized multichannel active noise control (MCANC) algorithm, which requires substantial computational resources, decentralized approaches exhibit higher computational efficiency but typically result in inferior noise reduction performance. To enhance performance, distributed ANC methods have been introduced, enabling information exchange among ANC nodes; however, the resulting communication latency often compromises system stability. To overcome these limitations, we propose a self-boosted weight-constrained filtered-reference least mean square (SB-WCFxLMS) algorithm for the distributed MCANC system without internode communication. The WCFxLMS algorithm is specifically designed to mitigate divergence issues caused by the internode cross-talk effect. The self-boosted strategy lets each ANC node independently adapt its constraint parameters based on its local noise reduction performance, thus ensuring effective noise cancellation without the need for inter-node communication. With the assistance of this mechanism, this approach significantly reduces both computational complexity and communication overhead. Numerical simulations employing real acoustic paths and compressor noise validate the effectiveness and robustness of the proposed system. The results demonstrate that our proposed method achieves satisfactory noise cancellation performance with minimal resource requirements.

eess.AS↗
arXiv2024

Preventing output saturation in active noise control: An output-constrained Kalman filter approach

The Kalman filter (KF)-based active noise control (ANC) system demonstrates superior tracking and faster convergence compared to the least mean square (LMS) method, particularly in dynamic noise cancellation scenarios. However, in environments with extremely high noise levels, the power of the control signal can exceed the system's rated output power due to hardware limitations, leading to output saturation and subsequent non-linearity. To mitigate this issue, a modified KF with an output constraint is proposed. In this approach, the disturbance treated as an measurement is re-scaled by a constraint factor, which is determined by the system's rated power, the secondary path gain, and the disturbance power. As a result, the output power of the system, i.e. the control signal, is indirectly constrained within the maximum output of the system, ensuring stability. Simulation results indicate that the proposed algorithm not only achieves rapid suppression of dynamic noise but also effectively prevents non-linearity due to output saturation, highlighting its practical significance.

eess.SY↗
arXiv2024

Transferable Selective Virtual Sensing Active Noise Control Technique Based on Metric Learning

Virtual sensing (VS) technology enables active noise control (ANC) systems to attenuate noise at virtual locations distant from the physical error microphones. Appropriate auxiliary filters (AF) can significantly enhance the effectiveness of VS approaches. The selection of appropriate AF for various types of noise can be automatically achieved using convolutional neural networks (CNNs). However, training the CNN model for different ANC systems is often labour-intensive and time-consuming. To tackle this problem, we propose a novel method, Transferable Selective VS, by integrating metric-learning technology into CNN-based VS approaches. The Transferable Selective VS method allows a pre-trained CNN to be applied directly to new ANC systems without requiring retraining, and it can handle unseen noise types. Numerical simulations demonstrate the effectiveness of the proposed method in attenuating sudden-varying broadband noises and real-world noises.

eess.SP↗