arXiv subjects

Boris M. Varbanov

Publications and source records attributed to Boris M. Varbanov.

6 recordsLinked to original sources

arXiv2026

Discovering correlated error mechanisms: data-driven augmentation of detector error models improving decoding

Accurate decoder priors are essential for high-performance quantum error correction. Theoretical noise models inevitably omit physically relevant error mechanisms, most notably correlated errors, which appear consistently in experimental error budgets yet are absent from standard models. We introduce a data-driven method for augmenting detector error models (DEMs) by discovering entirely new error mechanisms directly from experimental detector-firing statistics, going beyond most existing approaches that merely refine the probabilities of already-known mechanisms. Our method generates candidates by combining pairs of existing mechanisms as building blocks, then filters and validates them using pairwise and higher-order detector correlations. Crucially, this construction provides each newly discovered mechanism with a well-defined logical effect derived from the constituent error mechanisms, enabling its direct use in decoding. Furthermore, each mechanism is accompanied by a natural decomposition into lower-order components, preserving compatibility with the original decoder. This is particularly valuable in settings that rely on correlated graph-based decoders such as correlated matching. We evaluate the method on surface-code simulations with correlated noise and correlated-matching decoding, demonstrating that, in a realistic near-term noise scenario, DEM augmentation increases the Lambda parameter by 20% across code distances 7-15 and reduces the logical error rate by 75% at code distance 15 relative to the unaugmented DEM. On experimental data from Google's superconducting device, the augmented DEM increases the Lambda parameter by 9% across code distances 5-7 and yields a reduction of 14% in logical error rate over the baseline for distance 7. To our knowledge, this is the first data-driven DEM augmentation method that produces decomposed hyperedges with assigned logical effects.

quant-ph↗

arXiv2026

Measurement-induced state transitions in multi-qubit transmon processors

Dispersive readout of the transmon qubit in circuit QED is known to lose its quantum non-demolition character at small to moderate measurement drive amplitudes. This phenomenon is understood to originate from Laundau-Zener transitions at accidental multi-photon resonances, where $n$ drive photons can promote the transmon by $m$ levels. This interpretation has been shown to be in agreement with experiments characterizing the dispersive readout of a single transmon. The impact of these measurement-induced state transition (MIST) of a transmon embedded in a multi-qubit chip, however, remains largely unexplored. Here, we show that the presence of other components, such as qubits and couplers, can affect the MIST threshold of a measured transmon. To arrive at these results, we present a general method to characterize measurement-induced transition when the qubit under readout is coupled to other circuit elements, a ubiquitous situation in circuit QED-based quantum processors. As an example, we consider the case of two transmon qubits, and we show that the spectator qubit can be impacted by the measurement-induced transition of the readout qubit and, conversely, that the presence of the spectator qubit can lower the MIST threshold of the readout qubit. Finally, we explore how adding a coupler mode between the two qubits further modifies these effects.

quant-ph↗

arXiv2026

Measurement-induced state transitions across the fluxonium qubit landscape

Understanding the mechanisms that limit high-fidelity readout in circuit quantum electrodynamics is essential for its optimization. Multi-photon resonances are understood to be a limiting factor, causing population transfer from the computational states to higher-energy states under drive. This effect, known as measurement-induced state transitions, has been extensively studied for the transmon qubit. While this exploration has begun for the fluxonium qubit, a systematic study of this effect is lacking. Here, we bridge this gap by theoretically studying measurement-induced state transitions in the fluxonium qubit over a wide range of parameters, comprising essentially all experimentally explored ranges. We find that lighter fluxoniums are less susceptible to these state transitions when compared to their heavier counterparts. We attribute this effect to the combination of lower density of multi-photon resonances, a smaller requisite coupling for a given dispersive shift, and a more harmonic-like structure of the charge operator. We confirm the validity of our analysis by performing time-dependent readout simulations. Finally, we consider the impact of the superinductor's array modes on measurement-induced state transitions over a large range of parameters.

quant-ph↗

arXiv2023

Neural network decoder for near-term surface-code experiments

Neural-network decoders can achieve a lower logical error rate compared to conventional decoders, like minimum-weight perfect matching, when decoding the surface code. Furthermore, these decoders require no prior information about the physical error rates, making them highly adaptable. In this study, we investigate the performance of such a decoder using both simulated and experimental data obtained from a transmon-qubit processor, focusing on small-distance surface codes. We first show that the neural network typically outperforms the matching decoder due to better handling errors leading to multiple correlated syndrome defects, such as $Y$ errors. When applied to the experimental data of [Google Quantum AI, Nature 614, 676 (2023)], the neural network decoder achieves logical error rates approximately $25\%$ lower than minimum-weight perfect matching, approaching the performance of a maximum-likelihood decoder. To demonstrate the flexibility of this decoder, we incorporate the soft information available in the analog readout of transmon qubits and evaluate the performance of this decoder in simulation using a symmetric Gaussian-noise model. Considering the soft information leads to an approximately $10\%$ lower logical error rate, depending on the probability of a measurement error. The good logical performance, flexibility, and computational efficiency make neural network decoders well-suited for near-term demonstrations of quantum memories.

quant-ph↗

arXiv2022

Microwave-activated gates between a fluxonium and a transmon qubit

We propose and analyze two types of microwave-activated gates between a fluxonium and a transmon qubit, namely a cross-resonance (CR) and a CPHASE gate. The large frequency difference between a transmon and a fluxonium makes the realization of a two-qubit gate challenging. For a medium-frequency fluxonium qubit, the transmon-fluxonium system allows for a cross-resonance effect mediated by the higher levels of the fluxonium over a wide range of transmon frequencies. This allows one to realize the cross-resonance gate by driving the fluxonium at the transmon frequency, mitigating typical problems of the cross-resonance gate in transmon-transmon chips related to frequency targeting and residual ZZ coupling. However, when the fundamental frequency of the fluxonium enters the low-frequency regime below 100 MHz, the cross-resonance effect decreases leading to long gate times. For this range of parameters, a fast microwave CPHASE gate can be implemented using the higher levels of the fluxonium. In both cases, we perform numerical simulations of the gate showing that a gate fidelity above 99% can be obtained with gate times between 100 and 300 ns. Next to a detailed gate analysis, we perform a study of chip yield for a surface code lattice of fluxonia and transmons interacting via the proposed cross-resonance gate. We find a much better yield as compared to a transmon-only architecture with the cross-resonance gate as native two-qubit gate.

quant-ph↗

arXiv2021

A hardware-efficient leakage-reduction scheme for quantum error correction with superconducting transmon qubits

Leakage outside of the qubit computational subspace poses a threatening challenge to quantum error correction (QEC). We propose a scheme using two leakage-reduction units (LRUs) that mitigate these issues for a transmon-based surface code, without requiring an overhead in terms of hardware or QEC-cycle time as in previous proposals. For data qubits we consider a microwave drive to transfer leakage to the readout resonator, where it quickly decays, ensuring that this negligibly affects the coherence within the computational subspace for realistic system parameters. For ancilla qubits we apply a $|1\rangle\leftrightarrow|2\rangle$ $π$ pulse conditioned on the measurement outcome. Using density-matrix simulations of the distance-3 surface code we show that the average leakage lifetime is reduced to almost 1 QEC cycle, even when the LRUs are implemented with limited fidelity. Furthermore, we show that this leads to a significant reduction of the logical error rate. This LRU scheme opens the prospect for near-term scalable QEC demonstrations.

quant-ph↗