arXiv subjects

Boris Bellalta

Publications and source records attributed to Boris Bellalta.

At least 109 records · Page 6Linked to original sources

arXiv2016

A Centralized Mechanism to Make Predictions Based on Data From Multiple WSNs

In this work, we present a method that exploits a scenario with inter-Wireless Sensor Networks (WSNs) information exchange by making predictions and adapting the workload of a WSN according to their outcomes. We show the feasibility of an approach that intelligently utilizes information produced by other WSNs that may or not belong to the same administrative domain. To illustrate how the predictions using data from external WSNs can be utilized, a specific use-case is considered, where the operation of a WSN measuring relative humidity is optimized using the data obtained from a WSN measuring temperature. Based on a dedicated performance score, the simulation results show that this new approach can find the optimal operating point associated to the trade-off between energy consumption and quality of measurements. Moreover, we outline the additional challenges that need to be overcome, and draw conclusions to guide the future work in this field.

cs.NI↗

arXiv2016

Traffic Differentiation in Dense Collision-free WLANs using CSMA/ECA

The ability to perform traffic differentiation is a promising feature of the current Medium Access Control (MAC) in Wireless Local Area Networks (WLANs). The Enhanced Distributed Channel Access (EDCA) protocol for WLANs proposes up to four Access Categories (AC) that can be mapped to different traffic priorities. High priority ACs are allowed to transmit more often than low priority ACs, providing a way of prioritising delay sensitive traffic like voice calls or video streaming. Further, EDCA also considers the intricacies related to the management of multiple queues, virtual collisions and traffic differentiation. Nevertheless, EDCA falls short in efficiency when performing in dense WLAN scenarios. Its collision-prone contention mechanism degrades the overall throughput to the point of starving low priority ACs, and produce priority inversions at high number of contenders. Carrier Sense Multiple Access with Enhanced Collision Avoidance (CSMA/ECA) is a compatible MAC protocol for WLANs which is also capable of providing traffic differentiation. Contrary to EDCA, CSMA/ECA uses a contention mechanism with a deterministic backoff technique which is capable of constructing collision-free schedules for many nodes with multiple active ACs, extending the network capacity without starving low priority ACs, as experienced in EDCA. This work analyses traffic differentiation with CSMA/ECA by describing the mechanisms used to construct collision-free schedules with multiple queues. Additionally, evaluates the performance under different traffic conditions and a growing number of contenders. (arXiv's abstract field is not large enough for the paper's abstract, please download the paper for the complete abstract.)

cs.NI↗

arXiv2016

On the importance and feasibility of forecasting data in sensors

The first generation of wireless sensor nodes have constrained energy resources and computational power, which discourages applications to process any task other than measuring and transmitting towards a central server. However, nowadays, sensor networks tend to be incorporated into the Internet of Things and the hardware evolution may change the old strategy of avoiding data computation in the sensor nodes. In this paper, we show the importance of reducing the number of transmissions in sensor networks and present the use of forecasting methods as a way of doing it. Experiments using real sensor data show that state-of-the-art forecasting methods can be successfully implemented in the sensor nodes to keep the quality of their measurements and reduce up to 30% of their transmissions, lowering the channel utilization. We conclude that there is an old paradigm that is no longer the most beneficial, which is the strategy of always transmitting a measurement when it differs by more than a threshold from the last one transmitted. Adopting more complex forecasting methods in the sensor nodes is the alternative to significantly reduce the number of transmissions without compromising the quality of their measurements, and therefore support the exponential growth of the Internet of Things.

cs.NI↗

arXiv2015

An Energy Consumption Model for IEEE 802.11ah WLANs

One of the main challenges when designing a new self-powered wireless sensor network (WSN) technology is the vast operational dependence on its scarce energy resources. Therefore, a thorough identification and characterisation of the main energy consumption processes may lay the foundation for developing further mechanisms aimed to make a more efficient use of devices' batteries. This paper provides an energy consumption model for IEEE 802.11ah WLANs operating in power saving mode, which are expected to become one of the technology drivers in the development of the Internet of Things (IoT) in the next years. Given the network characteristics, the presented analytical model is able to provide an estimation of the average energy consumed by a station as well as to predict its battery lifetime. Once the model has been validated, we use it to obtain the optimal IEEE 802.11ah power saving parameters in several IoT key scenarios, validating that the parameters provided by the IEEE 802.11ah Task Group are already a very good choice.

cs.NI↗

arXiv2015

A High Efficiency MAC Protocol for WLANs: Providing Fairness in Dense Scenarios

Collisions are a main cause of throughput degradation in WLANs. The current contention mechanism used in IEEE 802.11 networks is called Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA). It uses a Binary Exponential Backoff (BEB) technique to randomise each contender attempt of transmitting, effectively reducing the collision probability. Nevertheless, CSMA/CA relies on a random backoff that while effective and fully decentralised, in principle is unable to completely eliminate collisions, therefore degrading the network throughput as more contenders attempt to share the channel. To overcome these situations, Carrier Sense Multiple Access with Enhanced Collision Avoidance (CSMA/ECA) is able to create a collision-free schedule in a fully decentralised manner using a deterministic backoff after successful transmissions. Hysteresis and Fair Share are two extensions of CSMA/ECA to support a large number of contenders in a collision-free schedule. CSMA/ECA offers better throughput than CSMA/CA and short-term throughput fairness. This work describes CSMA/ECA and its extensions. Additionally, it provides the first evaluation results of CSMA/ECA with non-saturated traffic, channel errors, and its performance when coexisting with CSMA/CA nodes. Furthermore, it describes the effects of imperfect clocks over CSMA/ECA and present a mechanism to leverage the impact of channel errors and the addition/withdrawal of nodes over collision-free schedules. Finally, experimental results on throughput and lost frames from a CSMA/ECA implementation using commercial hardware and open-source firmware are presented.

cs.NI↗

arXiv2015

Analysis of Dynamic Channel Bonding in Dense Networks of WLANs

Dynamic Channel Bonding (DCB) allows for the dynamic selection and use of multiple contiguous basic channels in Wireless Local Area Networks (WLANs). A WLAN operating under DCB can enjoy a larger bandwidth, when available, and therefore achieve a higher throughput. However, the use of larger bandwidths also increases the contention with adjacent WLANs, which can result in longer delays in accessing the channel and consequently, a lower throughput. In this paper, a scenario consisting of multiple WLANs using DCB and operating within carrier-sensing range of one another is considered. An analytical framework for evaluating the performance of such networks is presented. The analysis is carried out using a Markov chain model that characterizes the interactions between adjacent WLANs with overlapping channels. An algorithm is proposed for systematically constructing the Markov chain corresponding to any given scenario. The analytical model is then used to highlight and explain the key properties that differentiate DCB networks of WLANs from those operating on a single shared channel. Furthermore, the analysis is applied to networks of IEEE 802.11ac WLANs operating under DCB--which do not fully comply with some of the simplifying assumptions in our analysis--to show that the analytical model can give accurate results in more realistic scenarios.

cs.NI↗

arXiv2015

Predicting Occupancy Trends in Barcelona's Bicycle Service Stations Using Open Data

In 2008, the CEO of the company that manages and maintains the public bicycle service in Barcelona recognized that one may not expect to always find a place to leave the rented bike nearby their destination, similarly to the case when, driving a car, people may not find a parking lot. In this work, we make predictions about the statuses of the stations of the public bicycle service in Barcelona. We show that it is feasible to correctly predict nearly half of the times when the stations are either completely full of bikes or completely empty, up to 2 days before they actually happen. That is, users might avoid stations at times when they could not return a bicycle that they have rented before, or when they would not find a bike to rent. To achieve that, we apply the Random Forest algorithm to classify the status of the stations and improve the lifetime of the models using publicly available data, such as information about the weather forecast. Finally, we expect that the results of the predictions can be used to improve the quality of the service and make it more reliable for the users.

cs.AI↗

arXiv2015

IEEE 802.11ax: High-Efficiency WLANs

IEEE 802.11ax-2019 will replace both IEEE 802.11n-2009 and IEEE 802.11ac-2013 as the next high-throughput Wireless Local Area Network (WLAN) amendment. In this paper, we review the expected future WLAN scenarios and use-cases that justify the push for a new PHY/MAC IEEE 802.11 amendment. After that, we overview a set of new technical features that may be included in the IEEE 802.11ax-2019 amendment and describe both their advantages and drawbacks. Finally, we discuss some of the network-level functionalities that are required to fully improve the user experience in next-generation WLANs and note their relation with other on-going IEEE 802.11 amendments.

cs.NI↗

arXiv2014

MU-MIMO MAC Protocols for Wireless Local Area Networks: A Survey

As wireless devices boom, and bandwidth-hungry applications (e.g., video and cloud uploading) get popular, today's Wireless Local Area Networks (WLANs) become not only crowded but also stressed at throughput. Multi-user Multiple-Input and Multiple-Output (MU-MIMO), an advanced form of MIMO, has gained attention due to its huge potential in improving the performance of WLANs. This paper surveys random access based MAC protocols for MU-MIMO enabled WLANs. It first provides background information about the evolution and the fundamental MAC schemes of IEEE 802.11 Standards and Amendments, and then identifies the key requirements of designing MU-MIMO MAC protocols for WLANs. After that, the most representative MU-MIMO MAC proposals in the literature are overviewed by benchmarking their MAC procedures and examining the key components, such as the channel state information acquisition, de/pre-coding and scheduling schemes. Classifications and discussions on important findings of the surveyed MAC protocols are provided, based on which, the research challenges for designing effective MU-MIMO MAC protocols, as well as the envisaged MAC's role in the future heterogeneous networks, are highlighted.

cs.NI↗

arXiv2014

Implementation and Experimental Evaluation of a Collision-Free MAC Protocol for WLANs

Collisions are a main cause of throughput degradation in Wireless LANs. The current contention mechanism for these networks is based on a random backoff strategy to avoid collisions with other transmitters. Even though it can reduce the probability of collisions, the random backoff prevents users from achieving Collision-Free schedules, where the channel would be used more efficiently. Modifying the contention mechanism by waiting for a deterministic timer after successful transmissions, users would be able to construct a Collision-Free schedule among successful contenders. This work shows the experimental results of a Collision-Free MAC (CF-MAC) protocol for WLANs using commercial hardware and open firmware for wireless network cards which is able to support many users. Testbed results show that the proposed CF-MAC protocol leads to a better distribution of the available bandwidth among users, higher throughput and lower losses than the unmodified WLANs clients using a legacy firmware.

cs.NI↗

arXiv2014

Uni-MUMAC: A Unified Down/Up-link MU-MIMO MAC Protocol for IEEE 802.11ac WLANs

Due to the dominance of the downlink traffic in Wireless Local Area Networks (WLANs), a large number of previous research efforts have been put to enhance the transmission from the Access Point (AP) to stations (STAs). The downlink Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique, supported by the latest IEEE amendment-802.11ac, is considered as one of the key enhancements leading WLANs to the Gigabit era. However, as cloud uploading services, Peer-to-Peer (P2P) and telepresence applications get popular, the need for a higher uplink capacity becomes inevitable. In this paper, a unified down/up-link Medium Access Control (MAC) protocol called Uni-MUMAC is proposed to enhance the performance of IEEE 802.11ac WLANs by exploring the multi-user spatial multiplexing technique. Specifically, in the downlink, we implement an IEEE 802.11ac-compliant MU-MIMO transmission scheme to allow the AP to simultaneously send frames to a group of STAs. In the uplink, we extend the traditional one round channel access contention to two rounds, which coordinate multiple STAs to transmit frames to the AP simultaneously. 2-nd round Contention Window (CW2nd), a parameter that makes the length of the 2-nd contention round elastic according to the traffic condition, is introduced. Uni-MUMAC is evaluated through simulations in saturated and non-saturated conditions when both downlink and uplink traffic are present in the system. We also propose an analytic saturation model to validate the simulation results. By properly setting CW2nd and other parameters, Uni-MUMAC is compared to a prominent multi-user transmission scheme in the literature. The results exhibit that Uni-MUMAC not only performs well in the downlink-dominant scenario, but it is also able to balance both the downlink and uplink throughput in the emerging uplink bandwidth-hungry scenario.

cs.NI↗

arXiv2014

Towards information-centric WSN simulations

In pursuance of integrating Wireless Sensor Networks (WSNs) with other systems, the use of techniques from other fields, such as machine learning and information processing, are becoming more common. Therefore, we faced the problem of missing network simulations that are not only focused on the packet exchange between network elements, but also in the data that is transmitted between them. In other words, we needed a tool that evaluated the WSNs on how they evolve and react to the environmental changes. To illustrate the benefits of having such perspective, we explain the kind of simulation problems that we solved in our last work. Moreover, we outline the next steps in the direction of creating an extension to support this approach.

cs.NI↗

arXiv2013

Capacity Analysis of IEEE 802.11ah WLANs for M2M Communications

Focusing on the increasing market of the sensors and actuators networks, the IEEE 802.11ah Task Group is currently working on the standardization of a new amendment. This new amendment will operate at the sub-1GHz band, ensure transmission ranges up to 1 Km, data rates above 100 kbps and very low power operation. With IEEE 802.11ah, the WLANs will offer a solution for applications such as smart metering, plan automation, eHealth or surveillance. Moreover, thanks to a hierarchical signalling, the IEEE 802.11ah will be able to manage a higher number of stations (STAs) and improve the 802.11 Power Saving Mechanisms. In order to support a high number of STAs, two different signalling modes are proposed, TIM and Non-TIM Offset. In this paper we present a theoretical model to predict the maximum number of STAs supported by both modes depending on the traffic load and the data rate used. Moreover, the IEEE 802.11ah performance and energy consumption for both signalling modes and for different traffic patterns and data rates is evaluated. Results show that both modes achieve similar Packet Delivery Ratio values but the energy consumed with the TIM Offset is, in average, a 11.7% lower.

cs.NI↗

arXiv2013

On the Distributed Construction of a Collision-Free Schedule in WLANs

In wireless local area networks (WLANs), a media access protocol arbitrates access to the channel. In current IEEE 802.11 WLANs, carrier sense multiple access with collision avoidance (CSMA/CA) is used. Carrier sense multiple access with enhanced collision avoidance (CSMA/ECA) is a subtle variant of the well-known CSMA/CA algorithm that offers substantial performance benefits. CSMA/ECA significantly reduces the collision probability and, under certain conditions, leads to a completely collision-free schedule. The only difference between CSMA/CA and CSMA/ECA is that the latter uses a deterministic backoff after successful transmissions. This deterministic backoff is a constant and is the same for all the stations. The first part of the paper is of tutorial nature, offering an introduction to the basic operation of CSMA/ECA and describing the benefits of this approach in a qualitative manner. The second part of the paper surveys related contributions, briefly summarizing the main challenges and potential solutions, and also introducing variants and derivatives of CSMA/ECA.

cs.NI↗

arXiv2013

Managing Heterogeneous WSNs in Smart Cities: Challenges and Requirements

The dramatic advances in wireless communications and electronics have enabled the development of Wireless Sensor Networks (WSNs). WSNs consist of many affordable and portable sensor nodes for collecting data from the environment. In this article, we address management requirements of WSNs through presenting some key management scenarios in the Smart Cities context, such as intelligent transportation systems, smart grids and smart buildings. The limited resources and heterogeneous characteristics of WSNs pose new challenges in network management, which include the presence of various faults, the difficulty in replacing and repairing a large number of sensor nodes, the existence of an uncertain topology, and the resource allocation. To cope with these challenges, we first discuss advantages and disadvantages of centralized and distributed management approaches and then discuss the benefit of the multilevel management schema. Next, we present in detail the specific features for a WSN management system such as lightweight, self-detection, self-configuration, sharing infrastructure, service monitoring, plug and play, context awareness and interoperability. Finally, we present the required mechanisms for some basic management functions.

cs.NI↗

arXiv2013

Performance Analysis of a Multiuser Multi-Packet Transmission System for WLANs in Non-Saturation Conditions

Multiuser Multi-Packet Transmission (MPT) from an Access Point (AP) equipped with multiple antennas to multiple single-antenna nodes can be achieved by exploiting the spatial dimension of the channel. In this paper we present a queueing model to analytically study such systems from the link-layer perspective, in presence of random packet arrivals, heterogeneous channel conditions and packet errors. The analysis relies on a blind estimation of the number of different destinations among the packets waiting in the queue, which allows for building a simple, but general model for MPT systems with per-node First-In First-Out (FIFO) packet scheduling. Simulation results validate the accuracy of the analytical model and provide further insights on the cross-relations between the channel state, the number of antennas, and the number of active users, as well as how they affect the system performance. The simplicity and accuracy of the model makes it suitable for the evaluation of Medium Access Control (MAC) protocols for Ad-Hoc or Wireless Local Area Networks supporting multiuser MPT in non-saturation conditions, where the queueing dynamics play an important role on the achieved performance, and simple user selection algorithms are required.

cs.NI↗

arXiv2013

Performance Analysis of CSMA/CA Protocols with Multi-packet Transmission

Wireless objects equipped with multiple antennas are able to simultaneously transmit multiple packets by exploiting the channel's spatial dimensions. In this paper, we study the benefits of such Multiple Packet Transmission (MPT) approach, when it is used in combination with a Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) protocol for fully interconnected networks, addressing the interactions between the two mechanisms and showing the performance gains that can be achieved. To this end, a very simple Media Access Control (MAC) protocol that captures the fundamental properties and tradeoffs of a CSMA/CA channel access protocol supporting MPT is introduced. Using this protocol as a reference, a new analytical model is presented for the case of non-saturated traffic sources with finite buffer space. Simulation results show that the analytical model is able to accurately characterize the steady-state behaviour of the reference protocol for different number of antennas and different traffic loads, providing a useful tool for understanding the performance gains achieved by MAC protocols supporting MPT.

cs.NI↗

arXiv2013

Localization Procedure for Randomly Deployed Wireless Sensor Networks

Wireless Sensor Networks (WSNs) are composed of nodes that gather metrics like temperature, pollution or pressure from events generated by external entities. Localization in WSNs is paramount, given that the collected metrics must be related to the place of occurrence. This document presents an alternative way towards localization in randomly deployed WSNs based on the composability of localization protocols. Results show a totally distributed localization procedure that achieves a higher number of located nodes than the conventional, individual execution of localization protocols while maintaining the same low levels of battery consumption.

cs.NI↗