arXiv Science⌕ Search

arXiv subjects

Boris Bellalta

Publications and source records attributed to Boris Bellalta.

At least 55 records · Page 3Linked to original sources

Wi-Fi Meets ML: A Survey on Improving IEEE 802.11 Performance with Machine Learning

Wireless local area networks (WLANs) empowered by IEEE 802.11 (Wi-Fi) hold a dominant position in providing Internet access thanks to their freedom of deployment and configuration as well as the existence of affordable and highly interoperable devices. The Wi-Fi community is currently deploying Wi-Fi 6 and developing Wi-Fi 7, which will bring higher data rates, better multi-user and multi-AP support, and, most importantly, improved configuration flexibility. These technical innovations, including the plethora of configuration parameters, are making next-generation WLANs exceedingly complex as the dependencies between parameters and their joint optimization usually have a non-linear impact on network performance. The complexity is further increased in the case of dense deployments and coexistence in shared bands. While classical optimization approaches fail in such conditions, machine learning (ML) is able to handle complexity. Much research has been published on using ML to improve Wi-Fi performance and solutions are slowly being adopted in existing deployments. In this survey, we adopt a structured approach to describe the various Wi-Fi areas where ML is applied. To this end, we analyze over 250 papers in the field, providing readers with an overview of the main trends. Based on this review, we identify specific open challenges and provide general future research directions.

cs.NI↗

Performance and Coexistence Evaluation of IEEE 802.11be Multi-link Operation

Wi-Fi 7 is already in the making, and Multi-Link Operation (MLO) is one of the main features proposed in its correspondent IEEE 802.11be amendment. MLO will allow devices to coordinate multiple radio interfaces to access separate channels through a single association, aiming for improved throughput, network delay, and overall spectrum reuse efficiency. In this work, we study three reference scenarios to evaluate the performance of the two main MLO implementations -- Multi-Link Multi-Radio (MLMR) and Multi-Link Single-Radio (MLSR) -- , the interplay between multiple nodes employing them, and their coexistence with legacy Single-Link devices. Importantly, our results reveal that the potential of MLMR is mainly unleashed in isolated deployments or under unloaded network conditions. Instead, in medium- to high-load scenarios, MLSR may prove more effective in reducing the latency while guaranteeing fairness with contending Single-Link nodes.

cs.NI↗

Federated Spatial Reuse Optimization in Next-Generation Decentralized IEEE 802.11 WLANs

As wireless standards evolve, more complex functionalities are introduced to address the increasing requirements in terms of throughput, latency, security, and efficiency. To unleash the potential of such new features, artificial intelligence (AI) and machine learning (ML) are currently being exploited for deriving models and protocols from data, rather than by hand-programming. In this paper, we explore the feasibility of applying ML in next-generation wireless local area networks (WLANs). More specifically, we focus on the IEEE 802.11ax spatial reuse (SR) problem and predict its performance through federated learning (FL) models. The set of FL solutions overviewed in this work is part of the 2021 International Telecommunication Union (ITU) AI for 5G Challenge.

cs.NI↗

Cloud-gaming:Analysis of Google Stadia traffic

Interactive, real-time, and high-quality cloud video games pose a serious challenge to the Internet due to simultaneous high-throughput and low round trip delay requirements. In this paper, we investigate the traffic characteristics of Stadia, the cloud-gaming solution from Google, which is likely to become one of the dominant players in the gaming sector. To do that, we design several experiments, and perform an extensive traffic measurement campaign to obtain all required data. Our first goal is to gather a deep understanding of Stadia traffic characteristics by identifying the different protocols involved for both signalling and video/audio contents, the traffic generation patterns, and the packet size and inter-packet time probability distributions. Then, our second goal is to understand how different Stadia games and configurations, such as the video codec and the video resolution selected, impact on the characteristics of the generated traffic. We also evaluate the ability of Stadia to adapt to different link capacity conditions, including cases where the capacity drops suddenly, as well as sudden increases in the network latency. Our results and findings, besides illustrating the characteristics of Stadia traffic, are also valuable for planning and dimensioning future networks, as well as for designing new resource management strategies. Finally, we compare Stadia traffic to other video streaming applications, showcasing the main differences between them, and introduce a traffic model using our captures. We show that this model can be used in simulations to further investigate the network performance in presence of Stadia traffic.

cs.NI↗

Dynamic Traffic Allocation in IEEE 802.11be Multi-link WLANs

The multi-link operation (MLO) is a key feature of the next IEEE 802.11be Extremely High Throughput amendment. Through its adoption, it is expected to enhance users' experience by improving throughput rates and latency. However, potential MLO gains are tied to how traffic is distributed across the multiple radio interfaces. In this paper, we introduce a traffic manager atop MLO, and evaluate different high-level traffic-to-link allocation policies to distribute incoming traffic over the set of enabled interfaces. Following a flow-level approach, we compare both non-dynamic and dynamic traffic balancing policy types. The results show that the use of a dynamic policy, along with MLO, allows to significantly reduce the congestion suffered by traffic flows, enhancing the traffic delivery in all the evaluated scenarios, and in particular improving the quality of service received by video flows. Moreover, we show that the adoption of MLO in future Wi-Fi networks improves also the coexistence with non-MLO networks, which results in performance gains for both MLO and non-MLO networks.

cs.NI↗

Multi-link Operation in IEEE 802.11be WLANs

The multi-link operation (MLO) is a new feature proposed to be part of the IEEE 802.11be Extremely High Throughput (EHT) amendment. Such feature represents a paradigm shift towards multi-link communications, as nodes will be allowed to transmit and receive data over multiple radio interfaces concurrently. To make it possible, the 802.11be Task Group has proposed different modifications in regards to nodes' architecture, transmission operation, and management functionalities. This article reviews such changes and tackles the question of how traffic should be distributed over multiple links, as it is still unresolved. To that end, we evaluate different load balancing strategies over the active links. Results show that in high load, dense and complex scenarios, implementing congestion-aware load balancing policies to significantly enhance next-generation WLAN performance using MLO is a must.

cs.NI↗

TXOP sharing with Coordinated Spatial Reuse in Multi-AP Cooperative IEEE 802.11be WLANs

IEEE 802.11be networks (aka Wi-Fi 7) will have to cope with new bandwidth-hungry and low-latency services such as eXtended Reality and multi-party cloud gaming. With this goal in mind, transmit opportunity (TXOP) sharing between coordinated access points (APs) may contribute to alleviating inter-AP contention, hence increasing the overall network throughput. This paper evaluates two coordinated TXOP sharing strategies: coordinated time division multiple access (c-TDMA) and coordinated-TDMA with spatial reuse (c-TDMA/SR). We show that, while c-TDMA alone does not result in any significant improvement in terms of the WLAN throughput, it lays the groundwork to implement coordinated SR (c-SR) techniques. To evaluate the performance of c-TDMA/SR, we propose a fair scheduler able to select the best subset of parallel transmissions in WLAN deployments, as well as the appropriate power levels to be used by APs and stations (STAs), leading to maximum performance. The results obtained for c-TDMA/SR show significant throughput gains compared with c-TDMA, with values higher than 140% in 90% of the considered scenarios.

cs.NI↗

An Experimental Study of Latency for IEEE 802.11be Multi-link Operation

Will Multi-Link Operation (MLO) be able to improve the latency of Wi-Fi networks? MLO is one of the most disruptive MAC-layer techniques included in the IEEE 802.11be amendment. It allows a device to use multiple radios simultaneously and in a coordinated way, providing a new framework to improve the WLAN throughput and latency. In this paper, we investigate the potential latency benefits of MLO by using a large dataset containing 5 GHz spectrum occupancy measurements. Experimental results show that when the channels are symmetrically occupied, MLO can improve latency by one order of magnitude. In contrast, in asymmetrically occupied channels, MLO can sometimes be detrimental and increase latency. To address this case, we introduce Opportunistic Simultaneous Transmit and Receive (STR+) channel access and study its benefits.

cs.NI↗

Intelligent Reflecting Surface-Aided Wideband THz Communications: Modeling and Analysis

In this paper, we study the performance of wideband terahertz (THz) communications assisted by an intelligent reflecting surface (IRS). Specifically, we first introduce a generalized channel model that is suitable for electrically large THz IRSs operating in the near-field. Unlike prior works, our channel model takes into account the spherical wavefront of the emitted electromagnetic waves and the spatial-wideband effect. We next show that conventional frequency-flat beamfocusing significantly reduces the power gain due to beam squint, and hence is highly suboptimal. More importantly, we analytically characterize this reduction when the spacing between adjacent reflecting elements is negligible, i.e., holographic reflecting surfaces. Numerical results corroborate our analysis and provide important insights into the design of future IRS-aided THz systems.

cs.IT↗

Next generation IEEE 802.11 Wireless Local Area Networks: Current status, future directions and open challenges

new generation of Wireless Local Area Networks (WLANs) will make its appearance in the market in the forthcoming years based on the amendments to the IEEE 802.11 standards that have recently been approved or are under development. Examples of the most expected ones are IEEE 802.11aa (Robust Audio Video Transport Streaming), IEEE 802.11ac (Very-high throughput at < 6 GHz), IEEE 802.11af (TV White Spaces) and IEEE 802.11ah (Machine-to-Machine communications) specifications. The aim of this survey is to provide a comprehensive overview of these novel technical features and the related open technical challenges that will drive the future WLAN evolution. In contrast to other IEEE 802.11 surveys, this is a use case oriented study. Specifically, we first describe the three key scenarios in which next-generation WLANs will have to operate. We then review the most relevant amendments for each of these use cases focusing on the additional functionalities and the new technologies they include, such as multi-user MIMO techniques, groupcast communications, dynamic channel bonding, spectrum databases and channel sensing, enhanced power saving mechanisms and efficient small data transmissions. We also discuss the related work to highlight the key issues that must still be addressed. Finally, we review emerging trends that can influence the design of future WLANs, with special focus on software-defined MACs and the internet-working with cellular systems.

cs.NI↗

Electromagnetic Modeling of Holographic Intelligent Reflecting Surfaces at Terahertz Bands

Intelligent reflecting surface (IRS)-assisted wireless communication is widely deemed a key technology for 6G systems. The main challenge in deploying an IRS-aided terahertz (THz) link, though, is the severe propagation losses at high frequency bands. Hence, a THz IRS is expected to consist of a massive number of reflecting elements to compensate for those losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves must be taken into account. In this work, we focus on the near-field and analytically determine the IRS response in the Fresnel zone by leveraging electromagnetic theory. Specifically, we derive a novel expression for the path loss and beampattern of a holographic IRS, which is then used to model its discrete counterpart. Our analysis sheds light on the modeling aspects and beamfocusing capabilities of THz IRSs.

cs.IT↗

Stateless Reinforcement Learning for Multi-Agent Systems: the Case of Spectrum Allocation in Dynamic Channel Bonding WLANs

Spectrum allocation in the form of primary channel and bandwidth selection is a key factor for dynamic channel bonding (DCB) wireless local area networks (WLANs). To cope with varying environments, where networks change their configurations on their own, the wireless community is looking towards solutions aided by machine learning (ML), and especially reinforcement learning (RL) given its trial-and-error approach. However, strong assumptions are normally made to let complex RL models converge to near-optimal solutions. Our goal with this paper is two-fold: justify in a comprehensible way why RL should be the approach for wireless networks problems like decentralized spectrum allocation, and call into question whether the use of complex RL algorithms helps the quest of rapid learning in realistic scenarios. We derive that stateless RL in the form of lightweight multi-armed-bandits (MABs) is an efficient solution for rapid adaptation avoiding the definition of extensive or meaningless RL states.

cs.NI↗

Machine Learning for Performance Prediction of Channel Bonding in Next-Generation IEEE 802.11 WLANs

With the advent of Artificial Intelligence (AI)-empowered communications, industry, academia, and standardization organizations are progressing on the definition of mechanisms and procedures to address the increasing complexity of future 5G and beyond communications. In this context, the International Telecommunication Union (ITU) organized the first AI for 5G Challenge to bring industry and academia together to introduce and solve representative problems related to the application of Machine Learning (ML) to networks. In this paper, we present the results gathered from Problem Statement~13 (PS-013), organized by Universitat Pompeu Fabra (UPF), which primary goal was predicting the performance of next-generation Wireless Local Area Networks (WLANs) applying Channel Bonding (CB) techniques. In particular, we overview the ML models proposed by participants (including Artificial Neural Networks, Graph Neural Networks, Random Forest regression, and gradient boosting) and analyze their performance on an open dataset generated using the IEEE 802.11ax-oriented Komondor network simulator. The accuracy achieved by the proposed methods demonstrates the suitability of ML for predicting the performance of WLANs. Moreover, we discuss the importance of abstracting WLAN interactions to achieve better results, and we argue that there is certainly room for improvement in throughput prediction through ML.

cs.NI↗

IEEE 802.11be Multi-Link Operation: When the Best Could Be to Use Only a Single Interface

The multi-link operation (MLO) is a new feature proposed to be part of the IEEE 802.11be Extremely High Throughput (EHT) amendment. Through MLO, access points and stations will be provided with the capabilities to transmit and receive data from the same traffic flow over multiple radio interfaces. However, the question on how traffic flows should be distributed over the different interfaces to maximize the WLAN performance is still unresolved. To that end, we evaluate in this article different traffic allocation policies, under a wide variety of scenarios and traffic loads, in order to shed some light on that question. The obtained results confirm that congestion-aware policies outperform static ones. However, and more importantly, the results also reveal that traffic flows become highly vulnerable to the activity of neighboring networks when they are distributed across multiple links. As a result, the best performance is obtained when a new arriving flow is simply assigned entirely to the emptiest interface.

cs.NI↗

Intelligent Reflecting Surfaces at Terahertz Bands: Channel Modeling and Analysis

An intelligent reflecting surface (IRS) at terahertz (THz) bands is expected to have a massive number of reflecting elements to compensate for the severe propagation losses. However, as the IRS size grows, the conventional far-field assumption starts becoming invalid and the spherical wavefront of the radiated waves should be taken into account. In this work, we consider a spherical wave channel model and pursue a comprehensive study of IRS-aided multiple-input multiple-output (MIMO) in terms of power gain and energy efficiency (EE). Specifically, we first analyze the power gain under beamfocusing and beamforming, and show that the latter is suboptimal even for multiple meters away from the IRS. To this end, we derive an approximate, yet accurate, closed-form expression for the loss in the power gain under beamforming. Building on the derived model, we next show that an IRS can significantly improve the EE of MIMO when it operates in the radiating near-field and performs beamfocusing. Numerical results corroborate our analysis and provide novel insights into the design and performance of IRS-assisted THz communication.

eess.SP↗

Spatial Reuse in IEEE 802.11ax WLANs

Dealing with massively crowded scenarios is one of the most ambitious goals of next-generation wireless networks. With this goal in mind, the IEEE 802.11ax amendment includes, among other techniques, the Spatial Reuse (SR) operation. The SR operation encompasses a set of unprecedented techniques {that are expected to significantly boost Wireless Local Area Networks (WLANs) performance in dense environments}. In particular, the main objective of the SR operation is to maximize the utilization of the medium by increasing the number of parallel transmissions. Nevertheless, due to the novelty of the operation, its performance gains remain largely unknown. In this paper, we first provide a gentle tutorial of the SR operation included in the IEEE 802.11ax. Then, we analytically model SR and delve into the new kinds of MAC-level interactions among network devices. Finally, we provide a simulation-driven analysis to showcase the potential of SR in various deployments, comprising different network densities and traffic loads. Our results show that the SR operation can significantly improve the medium utilization, especially in scenarios under high interference conditions. Moreover, our results demonstrate the non-intrusive design characteristic of SR, which allows enhancing the number of simultaneous transmissions with a low impact on the environment. We conclude the paper by giving some thoughts on the main challenges and limitations of the IEEE 802.11ax SR operation, including research gaps and future directions.

cs.NI↗

Usage of Network Simulators in Machine-Learning-Assisted 5G/6G Networks

Without any doubt, Machine Learning (ML) will be an important driver of future communications due to its foreseen performance when applied to complex problems. However, the application of ML to networking systems raises concerns among network operators and other stakeholders, especially regarding trustworthiness and reliability. In this paper, we devise the role of network simulators for bridging the gap between ML and communications systems. In particular, we present an architectural integration of simulators in ML-aware networks for training, testing, and validating ML models before being applied to the operative network. Moreover, we provide insights on the main challenges resulting from this integration, and then give hints discussing how they can be overcome. Finally, we illustrate the integration of network simulators into ML-assisted communications through a proof-of-concept testbed implementation of a residential Wi-Fi network.

cs.NI↗

Channel load aware AP / Extender selection in Home WiFi networks using IEEE 802.11k/v

Next-generation Home WiFi networks have to step forward in terms of performance. New applications such as on-line games, virtual reality or high quality video contents will further demand higher throughput levels, as well as low latency. Beyond physical (PHY) and medium access control (MAC) improvements, deploying multiple access points (APs) in a given area may significantly contribute to achieve those performance goals by simply improving average coverage and data rates. However, it opens a new challenge: to determine the best AP for each given station (STA). This article studies the achievable performance gains of using secondary APs, also called Extenders, in Home WiFi networks in terms of throughput and delay. To do that, we introduce a centralized, easily implementable channel load aware selection mechanism for WiFi networks that takes full advantage of IEEE 802.11k/v capabilities to collect data from STAs, and distribute association decisions accordingly. These decisions are completely computed in the AP (or, alternatively, in an external network controller) based on an AP selection decision metric that, in addition to RSSI, also takes into account the load of both access and backhaul wireless links for each potential STA-AP/Extender connection. Performance evaluation of the proposed channel load aware AP and Extender selection mechanism has been first conducted in a purpose-built simulator, resulting in an overall improvement of the main analyzed metrics (throughput and delay) and the ability to serve, at least, 35% more traffic while keeping the network uncongested when compared to the traditional RSSI-based WiFi association. This trend was confirmed when the channel load aware mechanism was tested in a real deployment, where STAs were associated to the indicated AP/Extender and total throughput was increased by 77.12%.

cs.NI↗