arXiv subjects

Bohdan Kulchytskyy

Publications and source records attributed to Bohdan Kulchytskyy.

14 recordsLinked to original sources

arXiv2026

Quantum error correction of a grid-state qubit with state preparation and measurement errors below $10^{-3}$

Grid state qubits offer a hardware-efficient approach to large-scale fault-tolerant quantum computing. They access the information redundancy required for quantum error correction by exploiting the large Hilbert space naturally available in harmonic oscillators. Superconducting architectures are particularly suitable to implement grid state qubits due to their fast and high-fidelity operations. Grid states in superconducting circuits enable quantum error correction (QEC) with performance beyond break-even. However, the state preparation and measurements (SPAM) errors of grid states has been a significant limitation to computational performances. In this work, we leverage high-performance QEC to enable repeat-until-success state preparation of both cardinal and magic states of the single-mode grid-state qubit. We combine this with an improved measurement protocol that corrects for both finite-energy envelope and auxiliary qubit readout errors, and increases robustness to photon loss. Our experiments, using both techniques, achieve a combined state-preparation and measurement error below $10^{-3}$. This represents two orders-of-magnitude improvement over the state of the art, bringing this platform on par with standard SPAM error levels measured in transmon qubits.

quant-ph↗

arXiv2025

Optimization of High-Fidelity Single-Qubit Gates for Fluxoniums Using Single-Flux Quantum Control

We present a gradient-based method to construct memory-efficient, high-fidelity, single-qubit gates for fluxonium qubits. These gates are constructed using a sequence of single-flux quantum (SFQ) pulses that are sent to the qubit through either capacitive or inductive coupling. The schedule of SFQ pulses is constructed with an on-ramp and an off-ramp applied prior to and after a pulse train, where the pulses are spaced at intervals equal to the qubit period. We reduce the optimization problem to the scheduling of a fixed number of SFQ pulses in the on-ramp and solve it by relaxing the discretization constraint of the SFQ clock as an intermediate step, allowing the use of the Broyden-Fletcher-Goldfarb-Shanno optimizer. Using this approach, gate fidelities of 99.99 % can be achieved for inductive coupling and 99.9 % for capacitive coupling, with leakage being the main source of coherent errors for both approaches.

quant-ph↗

arXiv2024

Optimization of Two-Qubit Gates in Tunable-Coupler Architectures Using Single Flux Quantum Control

We present a gradient-based method to construct high-fidelity, two-qubit quantum gates in a system consisting of two transmon qubits coupled via a tunable coupler. In particular, we focus on single flux quantum (SFQ) pulses as a promising and scalable alternative to traditional control schemes that use microwave electronics. We develop a continuous embedding scheme to optimize these discrete pulses, taking advantage of auto-differentiation of our model. This approach allows us to achieve fSim-type gates with average gate fidelities on the order of 99.99% and CZ and CNOT gates with fidelities above 99.9%. Furthermore, we provide an alternative semi-analytical construction of these gates via an exact decomposition using a pair of fSim gates which leads to the reduction in memory required to store the associated pulse sequences.

quant-ph↗

arXiv2024

How to Build a Quantum Supercomputer: Scaling from Hundreds to Millions of Qubits

In the span of four decades, quantum computation has evolved from an intellectual curiosity to a potentially realizable technology. Today, small-scale demonstrations have become possible for quantum algorithmic primitives on hundreds of physical qubits. Nevertheless, there are significant outstanding challenges in quantum hardware, fabrication, software architecture, and algorithms on the path towards a full-stack scalable quantum computing technology. Here, we provide a comprehensive review of these scaling challenges. We show how to facilitate scaling by adopting existing semiconductor technology to build much higher-quality qubits, employing systems engineering approaches, and performing distributed heterogeneous quantum-classical computing. We provide a detailed resource and sensitivity analysis for quantum applications on surface-code error-corrected quantum computers given current, target, and desired hardware specifications based on superconducting qubits, accounting for a realistic distribution of errors. We provide comprehensive resource estimates for several utility-scale applications including quantum chemistry calculations, catalyst design, NMR spectroscopy, and Fermi-Hubbard simulation. We show that orders of magnitude enhancement in performance could be obtained by a combination of hardware improvements and tight quantum-HPC integration. Furthermore, we introduce high-performance architectures for quantum-probabilistic computing with custom-designed accelerators to tackle today's industry-scale classical optimization, machine learning, and quantum simulation tasks in a cost-effective manner.

quant-ph↗

arXiv2024

Optimizing Multi-level Magic State Factories for Fault-Tolerant Quantum Architectures

We propose a novel technique for optimizing a modular fault-tolerant quantum computing architecture, taking into account any desired space-time trade-offs between the number of physical qubits and the fault-tolerant execution time of a quantum algorithm. We consider a concept architecture comprising a dedicated zone as a multi-level magic state factory and a core processor for efficient logical operations, forming a supply chain network for production and consumption of magic states. Using a heuristic algorithm, we solve the multi-objective optimization problem of minimizing space and time subject to a user-defined error budget for the success of the computation, taking the performance of various fault-tolerant protocols into account. As an application, we show that physical quantum resource estimation reduces to a simple model involving a small number of key parameters, namely, the circuit volume, the error prefactors ($\mu$) and error suppression rates ($\Lambda$) of the fault-tolerant protocols, the reaction time ($\gamma$), and an allowed slowdown factor ($\beta$).

quant-ph↗

arXiv2024

Bootstrapping Classical Shadows for Neural Quantum State Tomography

We investigate the advantages of using autoregressive neural quantum states as ansatze for classical shadow tomography to improve its predictive power. We introduce a novel estimator for optimizing the cross-entropy loss function using classical shadows, and a new importance sampling strategy for estimating the loss gradient during training using stabilizer samples collected from classical shadows. We show that this loss function can be used to achieve stable reconstruction of GHZ states using a transformer-based neural network trained on classical shadow measurements. This loss function also enables the training of neural quantum states representing purifications of mixed states. Our results show that the intrinsic capability of autoregressive models in representing physically well-defined density matrices allows us to overcome the weakness of Pauli-based classical shadow tomography in predicting both high-weight observables and nonlinear observables such as the purity of pure and mixed states.

quant-ph↗

arXiv2023

Compact Pulse Schedules for High-Fidelity Single-Flux Quantum Qubit Control

In the traditional approach to controlling superconducting qubits using microwave pulses, the field of pulse shaping has emerged in order to assist in the removal of leakage and increase gate fidelity. However, the challenge of scaling microwave control electronics has created an opportunity to explore alternative methods such as single-flux quantum (SFQ) pulses. For qubits controlled by SFQ pulses, high fidelity gates can be achieved by optimizing the binary control sequence. We extend the notion of the derivative removal by adiabatic gate (DRAG) framework a transmon qubit controlled by SFQ drivers. The proposed implementation of SFQ pulse sequences can be stored in 22 bits or fewer, with gate fidelities exceeding 99.99%. This modest memory requirement could help reduce the footprint of the SFQ coprocessors and power dissipation while preserving their inherent advantages of scalability and cost-effectiveness.

quant-ph↗

arXiv2023

A Cryogenic Memristive Neural Decoder for Fault-tolerant Quantum Error Correction

Neural decoders for quantum error correction (QEC) rely on neural networks to classify syndromes extracted from error correction codes and find appropriate recovery operators to protect logical information against errors. Its ability to adapt to hardware noise and long-term drifts make neural decoders a promising candidate for inclusion in a fault-tolerant quantum architecture. However, given their limited scalability, it is prudent that small-scale (local) neural decoders are treated as first stages of multi-stage decoding schemes for fault-tolerant quantum computers with millions of qubits. In this case, minimizing the decoding time to match the stabilization measurements frequency and a tight co-integration with the QPUs is highly desired. Cryogenic realizations of neural decoders can not only improve the performance of higher stage decoders, but they can minimize communication delays, and alleviate wiring bottlenecks. In this work, we design and analyze a neural decoder based on an in-memory computation (IMC) architecture, where crossbar arrays of resistive memory devices are employed to both store the synaptic weights of the neural decoder and perform analog matrix-vector multiplications. In simulations supported by experimental measurements, we investigate the impact of TiOx-based memristive devices' non-idealities on decoding fidelity. We develop hardware-aware re-training methods to mitigate the fidelity loss, restoring the ideal decoder's pseudo-threshold for the distance-3 surface code. This work provides a pathway to scalable, fast, and low-power cryogenic IMC hardware for integrated fault-tolerant QEC.

quant-ph↗

arXiv2021

Neural Error Mitigation of Near-Term Quantum Simulations

Near-term quantum computers provide a promising platform for finding ground states of quantum systems, which is an essential task in physics, chemistry, and materials science. Near-term approaches, however, are constrained by the effects of noise as well as the limited resources of near-term quantum hardware. We introduce "neural error mitigation," which uses neural networks to improve estimates of ground states and ground-state observables obtained using near-term quantum simulations. To demonstrate our method's broad applicability, we employ neural error mitigation to find the ground states of the H$_2$ and LiH molecular Hamiltonians, as well as the lattice Schwinger model, prepared via the variational quantum eigensolver (VQE). Our results show that neural error mitigation improves numerical and experimental VQE computations to yield low energy errors, high fidelities, and accurate estimations of more-complex observables like order parameters and entanglement entropy, without requiring additional quantum resources. Furthermore, neural error mitigation is agnostic with respect to the quantum state preparation algorithm used, the quantum hardware it is implemented on, and the particular noise channel affecting the experiment, contributing to its versatility as a tool for quantum simulation.

quant-ph↗

arXiv2020

Generative models for sampling of lattice field theories

We explore a self-learning Markov chain Monte Carlo method based on the Adversarial Non-linear Independent Components Estimation Monte Carlo, which utilizes generative models and artificial neural networks. We apply this method to the scalar $\varphi^4$ lattice field theory in the weak-coupling regime and, in doing so, greatly increase the system sizes explored to date with this self-learning technique. Our approach does not rely on a pre-existing training set of samples, as the agent systematically improves its performance by bootstrapping samples collected by the model itself. We evaluate the performance of the trained model by examining its mixing time and study the ergodicity of generated samples. When compared to methods such as Hamiltonian Monte Carlo, this approach provides unique advantages such as the speed of inference and a compressed representation of Monte Carlo proposals for potential use in downstream tasks.

cond-mat.dis-nn↗

arXiv2019

The learnability scaling of quantum states: restricted Boltzmann machines

Generative modeling with machine learning has provided a new perspective on the data-driven task of reconstructing quantum states from a set of qubit measurements. As increasingly large experimental quantum devices are built in laboratories, the question of how these machine learning techniques scale with the number of qubits is becoming crucial. We empirically study the scaling of restricted Boltzmann machines (RBMs) applied to reconstruct ground-state wavefunctions of the one-dimensional transverse-field Ising model from projective measurement data. We define a learning criterion via a threshold on the relative error in the energy estimator of the machine. With this criterion, we observe that the number of RBM weight parameters required for accurate representation of the ground state in the worst case - near criticality - scales quadratically with the number of qubits. By pruning small parameters of the trained model, we find that the number of weights can be significantly reduced while still retaining an accurate reconstruction. This provides evidence that over-parametrization of the RBM is required to facilitate the learning process.

quant-ph↗

arXiv2019

Universal divergence of the Renyi entropy of a thinly sliced torus at the Ising fixed point

The entanglement entropy of a quantum critical system can provide new universal numbers that depend on the geometry of the entangling bipartition. We calculate a universal number called $\kappa$, which arises when a quantum critical system is embedded on a two-dimensional torus and bipartitioned into two cylinders. In the limit when one of the cylinders is a thin slice through the torus, $\kappa$ parameterizes a divergence that occurs in the entanglement entropy sub-leading to the area law. Using large-scale Monte Carlo simulations of an Ising model in 2+1 dimensions, we access the second Renyi entropy, and determine that, at the Wilson-Fisher (WF) fixed point, $\kappa_{2,\text{WF}} = 0.0174(5)$. This result is significantly different from its value for the Gaussian fixed point, known to be $\kappa_{2,\text{Gaussian}} \approx 0.0227998$.

cond-mat.str-el↗

arXiv2018

QuCumber: wavefunction reconstruction with neural networks

As we enter a new era of quantum technology, it is increasingly important to develop methods to aid in the accurate preparation of quantum states for a variety of materials, matter, and devices. Computational techniques can be used to reconstruct a state from data, however the growing number of qubits demands ongoing algorithmic advances in order to keep pace with experiments. In this paper, we present an open-source software package called QuCumber that uses machine learning to reconstruct a quantum state consistent with a set of projective measurements. QuCumber uses a restricted Boltzmann machine to efficiently represent the quantum wavefunction for a large number of qubits. New measurements can be generated from the machine to obtain physical observables not easily accessible from the original data.

quant-ph↗

arXiv2016

Quantum Boltzmann Machine

Inspired by the success of Boltzmann Machines based on classical Boltzmann distribution, we propose a new machine learning approach based on quantum Boltzmann distribution of a transverse-field Ising Hamiltonian. Due to the non-commutative nature of quantum mechanics, the training process of the Quantum Boltzmann Machine (QBM) can become nontrivial. We circumvent the problem by introducing bounds on the quantum probabilities. This allows us to train the QBM efficiently by sampling. We show examples of QBM training with and without the bound, using exact diagonalization, and compare the results with classical Boltzmann training. We also discuss the possibility of using quantum annealing processors like D-Wave for QBM training and application.

quant-ph↗