arXiv Science⌕ Search

arXiv subjects

Bobae Kim

Publications and source records attributed to Bobae Kim.

8 recordsLinked to original sources

The Barrel Imaging Calorimeter of the ePIC detector at the Electron-Ion Collider

The Electron-Ion Collider (EIC) is a next-generation facility expected to address fundamental open questions in nuclear physics, including the structure and dynamics of gluons in nucleons and nuclei. The Barrel Imaging Calorimeter (BIC) is the electromagnetic calorimeter of the ePIC detector, designed to meet the stringent performance requirements of the EIC, providing precise measurements and particle identification of scattered electrons, photons, and neutral mesons. The BIC is a high-granularity sampling calorimeter based on lead absorbers interleaved with scintillating fibers, complemented by pixelated imaging layers based on the AstroPix monolithic active pixel sensor. This hybrid design enables both accurate energy and position measurements, as well as three-dimensional shower reconstruction, making it a key component for realizing the full physics potential of the EIC. The BIC has successfully completed its Preliminary Design Review last year and is currently progressing toward the Final Design Review. In this talk, I will present an overview of the BIC concept and focus on its current status and performance results from bench tests, system integration studies, and recent beam tests.

physics.ins-det↗

Letter of Intent for Alpha Knockout from Nuclei in Hard Exclusive Processes with ALERT

We propose to measure hard exclusive $α$-knockout reactions from the light $α$-conjugate nuclei $^{12}$C, $^{16}$O, and $^{20}$Ne using electron scattering. Three reaction channels will be measured for the first time on the same target set: (i) the quasi-elastic knockout $(e, e' α)$ knockout, which establishes a baseline against $α$-clustering model calculations and tests final-state-interaction (FSI) models; (ii) coherent deeply virtual Compton scattering (DVCS) on a bound $α$, which provides a quark-level probe of the bound system through the beam-spin asymmetry; and (iii) coherent vector-meson production ($ϕ$ and J/{$ψ$}) on a bound $α$, which probes the gluon distribution of the bound cluster through two-gluon exchange. The central observables are ratios of cross sections and beam-spin asymmetries between the bound $α$ in $^{12}$C, $^{16}$O, and $^{20}$ Ne and the free $^4$He ground state. Together these measurements directly address the question of the role of QCD in the structure of light nuclei : do the quark and gluon distributions of an $α$ embedded in a heavier nucleus differ from those of a free 4He, and do those modifications track the increasing $α$-clustering strength along the $α$-conjugate chain? The measurement will use the 12 GeV CEBAF accelerator in Hall B with the CLAS12 spectrometer instrumented with the ALERT low-energy recoil detector and high-pressure gas straw targets. ALERT, which replaced the CLAS12 silicon vertex tracker, was successfully commissioned and operated during Run Group L (RG-L) from April through August 2025. It uniquely provides identification of low-momentum recoiling light ions (p, d, t, $^3$He, and $^4$He) close to the beamline at the high luminosities required by these exclusive channels.

nucl-ex↗

Beam Test Performance of AstroPix sensor with 120 GeV protons

AstroPix is a high-voltage CMOS (HV-CMOS) monolithic active pixel sensor (MAPS) developed for precision gamma-ray imaging and spectroscopy in the medium energy regime, as well as for precise shower imaging and tracking in the Barrel Imaging Calorimeter (BIC) of the Electron Proton/Ion Collider (ePIC) detector at the future Electron-Ion Collider (EIC). We present beam test results of the AstroPix v3 sensor using a 120 GeV proton beam at the Fermilab Test Beam Facility (FTBF), performed as part of the broader experimental campaign for the BIC prototype calorimeter. The sensor's 500 um pixel pitch enabled precise measurement of the beam profile, providing important information for calorimeter performance studies. Using the measured 120 GeV proton data, we measure the energy deposit of minimum ionizing particles and use them to extract the corresponding effective depletion depth.

physics.ins-det↗

Test-Beam Performance of the AstroPix Silicon Sensor for Imaging Calorimetry

AstroPix is a high-voltage CMOS HVCMOS monolithic active pixel sensor MAPS developed for future space-based gamma-ray missions. It is also a candidate technology for the imaging layer of the Barrel Imaging Calorimeter BIC in the ePIC experiment at the future Electron-Ion Collider EIC. We report the first AstroPix test-beam results obtained at the KEK Photon Factory Advanced Ring PF-AR and the CERN Proton Synchrotron PS T10 beam line in 2025, using the third prototype AstroPix-v3. AstroPix-v3 sensors were operated as both standalone tracking layers and imaging layers interleaved with prototype lead/scintillating-fiber Pb/SciFi calorimeter modules, using electron and hadron beams in the few-GeV/c momentum range. Event synchronization between the continuous readout of AstroPix-v3 and the trigger-based readout of the Pb/SciFi calorimeter was achieved using a common timestamp. The AstroPix-v3 sensors exhibit stable performance, reaching a maximum hit efficiency of 68 percent at a bias voltage of -400 V under pion-dominated beam conditions. When combined with the Pb/SciFi calorimeter, the AstroPix layers successfully capture the development of electromagnetic showers. Using Cherenkov-based particle identification, electron-induced events exhibit significantly higher hit multiplicities and broader spatial distributions than pion-induced events, thereby providing clear discrimination between electromagnetic and hadronic showers. These results demonstrate that AstroPix-v3 provides effective, high-granularity imaging of shower development and is well suited as an imaging layer in future calorimeter systems for both collider and space-based experiments.

physics.ins-det↗

Beam test of a Pb/SciFi prototype for the Barrel Imaging Calorimeter at the Electron-Ion Collider

A Lead-Scintillating Fiber (Pb/SciFi) prototype for the Barrel Imaging Calorimeter (BIC) at the Electron--Ion Collider (EIC) was tested with electron beams at the CERN PS T10 beam line in August 2024. The prototype consisted of unit modules with a sampling structure of lead sheets and scintillating fibers, corresponding to a total depth of approximately $10.9\,X_{0}$. Beam tests were performed with electron momenta between 0.5 and 3~GeV/$c$ to evaluate the energy and timing performance of the prototype. This study characterizes the performance of a Pb/SciFi prototype and provides input for future beam tests, calibration and readout optimization, and the development of larger-scale prototypes.

physics.ins-det↗

Performance of the AstroPix Prototype Module for the Barrel Imaging Calorimeter at the ePIC Detector and in Space-Based Payloads

AstroPix is a high-voltage CMOS (HV-CMOS) monolithic active pixel sensor originally developed to enable precision gamma-ray imaging and spectroscopy in the medium-energy regime (approximately 100 keV-100 MeV) based on the groundwork laid by ATLASpix and MuPix. It features a 500 um pixel pitch, in-pixel amplification and digitization, and low power consumption (around 3-4 mW/cm^2), making it scalable for large-area, multilayer telescope detector planes. The detectors have a designed dynamic range of 25 keV to 700 keV. With these features, AstroPix meets the requirements of future space-based high-energy telescopes and the imaging layers of the Barrel Imaging Calorimeter (BIC) in the Electron-Proton/Ion Collider (ePIC) detector at the future Electron-Ion Collider (EIC). For the space-based payload, AstroPix is being integrated into sounding rocket and balloon payloads to demonstrate the technical readiness of the devices. For BIC, AstroPix-based imaging layers interleaved within the lead/scintillating-fiber (Pb/SciFi) sampling calorimeter provide granular shower imaging, enabling key performance features such as electron/pion or gamma/neutral-pion separation. As part of the ongoing detector R&D efforts, we have been testing various AstroPix v3 configurations: the single chip, a quad-chip assembly, a three-layer stack of quad chips, and a nine-chip module that represents the smallest prototype unit of the BIC imaging layer. This presentation will highlight recent performance test results from these AstroPix detector configurations.

astro-ph.IM↗

AstroPix: A Pixelated HVCMOS Sensor for Space-Based Gamma-Ray Measurement

A next-generation medium-energy gamma-ray telescope targeting the MeV range would address open questions in astrophysics regarding how extreme conditions accelerate cosmic-ray particles, produce relativistic jet outflows, and more. One concept, AMEGO-X, relies upon the mission-enabling CMOS Monolithic Active Pixel Sensor silicon chip AstroPix. AstroPix is designed for space-based use, featuring low noise, low power consumption, and high scalability. Desired performance of the device include an energy resolution of 5 keV (or 10% FWHM) at 122 keV and a dynamic range per-pixel of 25-700 keV, enabled by the addition of a high-voltage bias to each pixel which supports a depletion depth of 500 um. This work reports on the status of the AstroPix development process with emphasis on the current version under test, version three (v3), and highlights of version two (v2). Version 3 achieves energy resolution of 10.4 +/- 3.2% at 59.5 keV and 94 +/- 6 um depletion in a low-resistivity test silicon substrate.

astro-ph.IM↗

Evaluation of the Response to Electrons and Pions in the Scintillating Fiber and Lead Calorimeter for the Future Electron-Ion Collider

The performance of the Baby Barrel Electromagnetic Calorimeter (Baby BCAL) - a small-scale lead-scintillating-fiber (Pb/ScFi) prototype of the GlueX Barrel Electromagnetic Calorimeter (BCAL) - was tested in a dedicated beam campaign at the Fermilab Test Beam Facility (FTBF). This study provides a benchmark for the Pb/ScFi component of the future Barrel Imaging Calorimeter (BIC) in the ePIC detector at the Electron-Ion Collider (EIC). The detector response to electrons and pions was studied at beam energies between 4 and 10 GeV, extending previous GlueX tests [NIM A 596 (2008) 327-337 and arXiv:1801.03088] to a higher energy regime. The calibrated detector exhibits good linearity within uncertainties, and its electron energy resolution meets EIC requirements. The data further constrain the constant term in the energy resolution to below 1.9%, improving upon previous constraints at lower energies. Simulations reproduce key features of the electron and pion data within the limitations of the collected dataset and the FTBF test environment. Electron-pion separation in the test beam setup was analyzed using multiple methods, incorporating varying degrees of beam-related effects. The inclusion of longitudinal shower profile information enhanced the separation performance, underscoring its relevance for the full-scale BIC in ePIC. These results provide essential benchmarks for the Pb/ScFi section of the future BIC, validating detector simulations and guiding optimization strategies for electron-pion discrimination.

physics.ins-det↗