arXiv subjects

Bo Yu

Publications and source records attributed to Bo Yu.

At least 37 records · Page 2Linked to original sources

arXiv2025

Critical States Identiffcation in Power System via Lattice Partition and Its Application in Reliability Assessment

With the increasing complexity of power systems,accurately identifying critical states (the states corresponding to minimal cut sets) and assessing system reliability have become crucial tasks. In this paper, a mathematical lattice structure is employed to represent and partition the state space of power system. Based on this structure, a novel recursive method is proposed to efffciently identify critical states by leveraging lattice partitioning and Optimal Power Flow(OPF) calculations. This method not only enables the extension of failure system states,but also calculates the upper and lower bounds of the Loss of Load Probability (LOLP) in a progressively converging manner. Compared to traditional reliability assessment methods such as State Enumeration (SE) and Monte Carlo Simulation (MCS), this approach offers greater accuracy and efffciency. Experiments conducted on the RBTS and RTS79 systems demonstrate that the proposed method accurately identiffes all critical states up to a preset order, which are high-risk states. The contribution of these critical states to LOLP highlights their signiffcance in the system. Moreover, the proposed method achieves the analytical value with signiffcantly fewer OPF calculations in RBTS system, reaching acceptable precision of LOLP up to 100 times faster than SE in both the RBTS and RTS systems.

eess.SY↗

arXiv2025

Frequency-domain Multi-modal Fusion for Language-guided Medical Image Segmentation

Automatically segmenting infected areas in radiological images is essential for diagnosing pulmonary infectious diseases. Recent studies have demonstrated that the accuracy of the medical image segmentation can be improved by incorporating clinical text reports as semantic guidance. However, the complex morphological changes of lesions and the inherent semantic gap between vision-language modalities prevent existing methods from effectively enhancing the representation of visual features and eliminating semantically irrelevant information, ultimately resulting in suboptimal segmentation performance. To address these problems, we propose a Frequency-domain Multi-modal Interaction model (FMISeg) for language-guided medical image segmentation. FMISeg is a late fusion model that establishes interaction between linguistic features and frequency-domain visual features in the decoder. Specifically, to enhance the visual representation, our method introduces a Frequency-domain Feature Bidirectional Interaction (FFBI) module to effectively fuse frequency-domain features. Furthermore, a Language-guided Frequency-domain Feature Interaction (LFFI) module is incorporated within the decoder to suppress semantically irrelevant visual features under the guidance of linguistic information. Experiments on QaTa-COV19 and MosMedData+ demonstrated that our method outperforms the state-of-the-art methods qualitatively and quantitatively.

cs.CV↗

arXiv2025

BDPM: A Machine Learning-Based Feature Extractor for Parkinson's Disease Classification via Gut Microbiota Analysis

Background: Parkinson's disease remains a major neurodegenerative disorder with high misdiagnosis rates, primarily due to reliance on clinical rating scales. Recent studies have demonstrated a strong association between gut microbiota and Parkinson's disease, suggesting that microbial composition may serve as a promising biomarker. Although deep learning models based ongut microbiota show potential for early prediction, most approaches rely on single classifiers and often overlook inter-strain correlations or temporal dynamics. Therefore, there is an urgent need for more robust feature extraction methods tailored to microbiome data. Methods: We proposed BDPM (A Machine Learning-Based Feature Extractor for Parkinson's Disease Classification via Gut Microbiota Analysis). First, we collected gut microbiota profiles from 39 Parkinson's patients and their healthy spouses to identify differentially abundant taxa. Second, we developed an innovative feature selection framework named RFRE (Random Forest combined with Recursive Feature Elimination), integrating ecological knowledge to enhance biological interpretability. Finally, we designed a hybrid classification model to capture temporal and spatial patterns in microbiome data.

cs.AI↗

arXiv2025

Towards Scalable and Interpretable Mobile App Risk Analysis via Large Language Models

Mobile application marketplaces are responsible for vetting apps to identify and mitigate security risks. Current vetting processes are labor-intensive, relying on manual analysis by security professionals aided by semi-automated tools. To address this inefficiency, we propose Mars, a system that leverages Large Language Models (LLMs) for automated risk identification and profiling. Mars is designed to concurrently analyze multiple applications across diverse risk categories with minimal human intervention. To enhance analytical precision and operational efficiency, Mars leverages a pre-constructed risk identification tree to extract relevant indicators from high-dimensional application features. This initial step filters the data, reducing the input volume for the LLM and mitigating the potential for model hallucination induced by irrelevant features. The extracted indicators are then subjected to LLM analysis for final risk determination. Furthermore, Mars automatically generates a comprehensive evidence chain for each assessment, documenting the analytical process to provide transparent justification. These chains are designed to facilitate subsequent manual review and to inform enforcement decisions, such as application delisting. The performance of Mars was evaluated on a real-world dataset from a partner Android marketplace. The results demonstrate that Mars attained an F1-score of 0.838 in risk identification and an F1-score of 0.934 in evidence retrieval. To assess its practical applicability, a user study involving 20 expert analysts was conducted, which indicated that Mars yielded a substantial efficiency gain, ranging from 60% to 90%, over conventional manual analysis.

cs.CR↗

arXiv2025

Edge-Based Multimodal Sensor Data Fusion with Vision Language Models (VLMs) for Real-time Autonomous Vehicle Accident Avoidance

Autonomous driving (AD) systems relying solely on onboard sensors may fail to detect distant or obstacle hazards, potentially causing preventable collisions; however, existing transformer-based Vehicle-to-Everything (V2X) approaches, which mitigate AD sensing limitations, either lack effective multimodal fusion and reasoning or struggle to meet real-time performance requirements under complex, high-dimensional traffic conditions. This paper proposes the Real-time Edge-based Autonomous Co-pilot Trajectory planner (REACT), a V2X-integrated trajectory optimization framework for AD based on a fine-tuned lightweight Vision-Language Model (VLM). REACT integrates infrastructure-provided hazard alerts with onboard sensor data, capturing intricate surrounding traffic dynamics and vehicle intents through visual embeddings, interpreting precise numerical data from symbolic inputs, and employing contextual reasoning to generate optimized, safety-oriented trajectories. To ensure robust real-time deployment on edge devices, REACT innovatively employs Residual Trajectory Fusion (RTF) design and specialized edge-adaptation strategies to reduce model complexity and improve inference efficiency. Evaluated on the DeepAccident benchmark, REACT achieves state-of-the-art performance, a 77% collision rate reduction, a 48.2% Video Panoptic Quality (VPQ), and a 0.57-second inference latency on the Jetson AGX Orin. Ablation studies validate the contribution of each input, module, and edge adaptation strategy. These results highlight the effectiveness of lightweight VLMs in enabling real-time cooperative planning on edge platforms and underscore the potential of language-guided contextual reasoning for improving traffic safety and responsiveness.

cs.AI↗

arXiv2025

A Sparsity-Aware Autonomous Path Planning Accelerator with HW/SW Co-Design and Multi-Level Dataflow Optimization

Path planning is critical for autonomous driving, generating smooth, collision-free, feasible paths based on perception and localization inputs. However, its computationally intensive nature poses significant challenges for resource-constrained autonomous driving hardware. This paper presents an end-to-end FPGA-based acceleration framework targeting the quadratic programming (QP), core of optimization-based path planning. We employ a hardware-friendly alternating direction method of multipliers (ADMM) for QP solving and a parallelizable preconditioned conjugate gradient (PCG) method for linear systems. By analyzing sparse matrix patterns, we propose customized storage schemes and efficient sparse matrix multiplication units, significantly reducing resource usage and accelerating matrix operations. Our multi-level dataflow optimization strategy incorporates intra-operator parallelization and pipelining, inter-operator fine-grained pipelining, and CPU-FPGA system-level task mapping. Implemented on the AMD ZCU102 platform, our framework achieves state-of-the-art latency and energy efficiency, including 1.48x faster performance than the best FPGA-based design, 2.89x over an Intel i7-11800H CPU, 5.62x over an ARM Cortex-A57 embedded CPU, and 1.56x over a state-of-the-art GPU solution, along with a 2.05x throughput improvement over existing FPGA-based designs.

cs.AR↗

arXiv2025

The optimal Padé polynomial for reconstruction of luminosity distance based on 10-fold cross-validation

The cosmography known as the Padé polynomials has been widely used in the reconstruction of luminosity distance, and the orders of Padé polynomials influence the reconstructed result derived from Padé approximation. In this paper, we present a more general scheme of selecting optimal Padé polynomial for reconstruction of luminosity distance based on 10-fold cross-validation. Then the proposed scheme is applied to Pantheon+ dataset. The numerical results clearly indicate that the proposed procedure has a remarkable ability to distinguish Padé approximations with different orders for the reconstruction of the luminosity distance. We conclude that the (2,1) Padé approximation is the optimal approach that can well explain Pantheon+ data at low and high red-shifts. Future applications of this scheme could help choose the optimal model that is more suitable for cosmological observation data at hand and gain a deeper understanding of the universe.

astro-ph.CO↗

arXiv2025

DaDu-Corki: Algorithm-Architecture Co-Design for Embodied AI-powered Robotic Manipulation

Embodied AI robots have the potential to fundamentally improve the way human beings live and manufacture. Continued progress in the burgeoning field of using large language models to control robots depends critically on an efficient computing substrate, and this trend is strongly evident in manipulation tasks. In particular, today's computing systems for embodied AI robots for manipulation tasks are designed purely based on the interest of algorithm developers, where robot actions are divided into a discrete frame basis. Such an execution pipeline creates high latency and energy consumption. This paper proposes \textsc{Corki}\xspace, an algorithm-architecture co-design framework for real-time embodied AI-powered robotic manipulation applications. We aim to decouple LLM inference, robotic control, and data communication in the embodied AI robots' compute pipeline. Instead of predicting action for one single frame, \textsc{Corki}\xspace predicts the trajectory for the near future to reduce the frequency of LLM inference. The algorithm is coupled with a hardware that accelerates transforming trajectory into actual torque signals used to control robots and an execution pipeline that parallels data communication with computation. \textsc{Corki}\xspace largely reduces LLM inference frequency by up to $5.1\times$, resulting in up to $5.9\times$ speed up. The success rate improvement can be up to 13.9\%.

cs.AR↗

arXiv2025

Grey Rhino Warning: IPv6 is Becoming Fertile Ground for Reflection Amplification Attacks

Distributed Denial-of-Service (DDoS) attacks represent a cost-effective and potent threat to network stability. While extensively studied in IPv4 networks, DDoS implications in IPv6 remain underexplored. The vast IPv6 address space renders brute-force scanning and amplifier testing for all active addresses impractical. Innovatively, this work investigates AS-level vulnerabilities to reflection amplification attacks in IPv6. One prerequisite for amplification presence is that it is located in a vulnerable autonomous system (AS) without inbound source address validation (ISAV) deployment. Hence, the analysis focuses on two critical aspects: global detection of ISAV deployment and identification of amplifiers within vulnerable ASes. Specifically, we develop a methodology combining ICMP Time Exceeded mechanisms for ISAV detection, employ IPv6 address scanning for amplifier identification, and utilize dual vantage points for amplification verification. Experimental results reveal that 4,460 ASes (61.36% of measured networks) lack ISAV deployment. Through scanning approximately 47M active addresses, we have identified reflection amplifiers in 3,507 ASes. The analysis demonstrates that current IPv6 networks are fertile grounds for reflection amplification attacks, alarming network security.

cs.NI↗

arXiv2025

NTIRE 2025 challenge on Text to Image Generation Model Quality Assessment

This paper reports on the NTIRE 2025 challenge on Text to Image (T2I) generation model quality assessment, which will be held in conjunction with the New Trends in Image Restoration and Enhancement Workshop (NTIRE) at CVPR 2025. The aim of this challenge is to address the fine-grained quality assessment of text-to-image generation models. This challenge evaluates text-to-image models from two aspects: image-text alignment and image structural distortion detection, and is divided into the alignment track and the structural track. The alignment track uses the EvalMuse-40K, which contains around 40K AI-Generated Images (AIGIs) generated by 20 popular generative models. The alignment track has a total of 371 registered participants. A total of 1,883 submissions are received in the development phase, and 507 submissions are received in the test phase. Finally, 12 participating teams submitted their models and fact sheets. The structure track uses the EvalMuse-Structure, which contains 10,000 AI-Generated Images (AIGIs) with corresponding structural distortion mask. A total of 211 participants have registered in the structure track. A total of 1155 submissions are received in the development phase, and 487 submissions are received in the test phase. Finally, 8 participating teams submitted their models and fact sheets. Almost all methods have achieved better results than baseline methods, and the winning methods in both tracks have demonstrated superior prediction performance on T2I model quality assessment.

cs.CV↗

arXiv2025

ADDT -- A Digital Twin Framework for Proactive Safety Validation in Autonomous Driving Systems

Autonomous driving systems continue to face safety-critical failures, often triggered by rare and unpredictable corner cases that evade conventional testing. We present the Autonomous Driving Digital Twin (ADDT) framework, a high-fidelity simulation platform designed to proactively identify hidden faults, evaluate real-time performance, and validate safety before deployment. ADDT combines realistic digital models of driving environments, vehicle dynamics, sensor behavior, and fault conditions to enable scalable, scenario-rich stress-testing under diverse and adverse conditions. It supports adaptive exploration of edge cases using reinforcement-driven techniques, uncovering failure modes that physical road testing often misses. By shifting from reactive debugging to proactive simulation-driven validation, ADDT enables a more rigorous and transparent approach to autonomous vehicle safety engineering. To accelerate adoption and facilitate industry-wide safety improvements, the entire ADDT framework has been released as open-source software, providing developers with an accessible and extensible tool for comprehensive safety testing at scale.

cs.RO↗

arXiv2025

KARMA: Augmenting Embodied AI Agents with Long-and-short Term Memory Systems

Embodied AI agents responsible for executing interconnected, long-sequence household tasks often face difficulties with in-context memory, leading to inefficiencies and errors in task execution. To address this issue, we introduce KARMA, an innovative memory system that integrates long-term and short-term memory modules, enhancing large language models (LLMs) for planning in embodied agents through memory-augmented prompting. KARMA distinguishes between long-term and short-term memory, with long-term memory capturing comprehensive 3D scene graphs as representations of the environment, while short-term memory dynamically records changes in objects' positions and states. This dual-memory structure allows agents to retrieve relevant past scene experiences, thereby improving the accuracy and efficiency of task planning. Short-term memory employs strategies for effective and adaptive memory replacement, ensuring the retention of critical information while discarding less pertinent data. Compared to state-of-the-art embodied agents enhanced with memory, our memory-augmented embodied AI agent improves success rates by 1.3x and 2.3x in Composite Tasks and Complex Tasks within the AI2-THOR simulator, respectively, and enhances task execution efficiency by 3.4x and 62.7x. Furthermore, we demonstrate that KARMA's plug-and-play capability allows for seamless deployment on real-world robotic systems, such as mobile manipulation platforms.Through this plug-and-play memory system, KARMA significantly enhances the ability of embodied agents to generate coherent and contextually appropriate plans, making the execution of complex household tasks more efficient. The experimental videos from the work can be found at https://youtu.be/4BT7fnw9ehs. Our code is available at https://github.com/WZX0Swarm0Robotics/KARMA/tree/master.

cs.RO↗

arXiv2025

L2HCount:Generalizing Crowd Counting from Low to High Crowd Density via Density Simulation

Since COVID-19, crowd-counting tasks have gained wide applications. While supervised methods are reliable, annotation is more challenging in high-density scenes due to small head sizes and severe occlusion, whereas it's simpler in low-density scenes. Interestingly, can we train the model in low-density scenes and generalize it to high-density scenes? Therefore, we propose a low- to high-density generalization framework (L2HCount) that learns the pattern related to high-density scenes from low-density ones, enabling it to generalize well to high-density scenes. Specifically, we first introduce a High-Density Simulation Module and a Ground-Truth Generation Module to construct fake high-density images along with their corresponding ground-truth crowd annotations respectively by image-shifting technique, effectively simulating high-density crowd patterns. However, the simulated images have two issues: image blurring and loss of low-density image characteristics. Therefore, we second propose a Head Feature Enhancement Module to extract clear features in the simulated high-density scene. Third, we propose a Dual-Density Memory Encoding Module that uses two crowd memories to learn scene-specific patterns from low- and simulated high-density scenes, respectively. Extensive experiments on four challenging datasets have shown the promising performance of L2HCount.

cs.CV↗

arXiv2025

VA-AR: Learning Velocity-Aware Action Representations with Mixture of Window Attention

Action recognition is a crucial task in artificial intelligence, with significant implications across various domains. We initially perform a comprehensive analysis of seven prominent action recognition methods across five widely-used datasets. This analysis reveals a critical, yet previously overlooked, observation: as the velocity of actions increases, the performance of these methods variably declines, undermining their robustness. This decline in performance poses significant challenges for their application in real-world scenarios. Building on these findings, we introduce the Velocity-Aware Action Recognition (VA-AR) framework to obtain robust action representations across different velocities. Our principal insight is that rapid actions (e.g., the giant circle backward in uneven bars or a smash in badminton) occur within short time intervals, necessitating smaller temporal attention windows to accurately capture intricate changes. Conversely, slower actions (e.g., drinking water or wiping face) require larger windows to effectively encompass the broader context. VA-AR employs a Mixture of Window Attention (MoWA) strategy, dynamically adjusting its attention window size based on the action's velocity. This adjustment enables VA-AR to obtain a velocity-aware representation, thereby enhancing the accuracy of action recognition. Extensive experiments confirm that VA-AR achieves state-of-the-art performance on the same five datasets, demonstrating VA-AR's effectiveness across a broad spectrum of action recognition scenarios.

cs.CV↗

arXiv2025

GaussianCAD: Robust Self-Supervised CAD Reconstruction from Three Orthographic Views Using 3D Gaussian Splatting

The automatic reconstruction of 3D computer-aided design (CAD) models from CAD sketches has recently gained significant attention in the computer vision community. Most existing methods, however, rely on vector CAD sketches and 3D ground truth for supervision, which are often difficult to be obtained in industrial applications and are sensitive to noise inputs. We propose viewing CAD reconstruction as a specific instance of sparse-view 3D reconstruction to overcome these limitations. While this reformulation offers a promising perspective, existing 3D reconstruction methods typically require natural images and corresponding camera poses as inputs, which introduces two major significant challenges: (1) modality discrepancy between CAD sketches and natural images, and (2) difficulty of accurate camera pose estimation for CAD sketches. To solve these issues, we first transform the CAD sketches into representations resembling natural images and extract corresponding masks. Next, we manually calculate the camera poses for the orthographic views to ensure accurate alignment within the 3D coordinate system. Finally, we employ a customized sparse-view 3D reconstruction method to achieve high-quality reconstructions from aligned orthographic views. By leveraging raster CAD sketches for self-supervision, our approach eliminates the reliance on vector CAD sketches and 3D ground truth. Experiments on the Sub-Fusion360 dataset demonstrate that our proposed method significantly outperforms previous approaches in CAD reconstruction performance and exhibits strong robustness to noisy inputs.

cs.CV↗

arXiv2025

The effect of gluon condensate on the entanglement entropy in a holographic model

In this study, we examine the impact of the gluon condensate on holographic entanglement entropy within an Einstein-Dilaton model at both zero and finite temperatures. A critical length exists for the difference in entanglement entropy between connected and disconnected surfaces in this model, which is typically interpreted as an indicator of phase transition. As the gluon condensate increases, the critical length decreases, suggesting that confinement strengthens at zero temperature. Additionally, the entropic C-function abruptly drops to zero at the critical length, indicating the absence of entangled states. At finite temperatures, the results show that the effect of the gluon condensate on the critical length is qualitatively similar to that at zero temperature. We observe that the entropic C-function increases as a function of $L$ at finite temperature, though it exhibits competitive behaviors when the gluon condensate is large.

hep-ph↗

arXiv2024

Brain-inspired AI Agent: The Way Towards AGI

Artificial General Intelligence (AGI), widely regarded as the fundamental goal of artificial intelligence, represents the realization of cognitive capabilities that enable the handling of general tasks with human-like proficiency. Researchers in brain-inspired AI seek inspiration from the operational mechanisms of the human brain, aiming to replicate its functional rules in intelligent models. Moreover, with the rapid development of large-scale models in recent years, the concept of agents has garnered increasing attention, with researchers widely recognizing it as a necessary pathway toward achieving AGI. In this article, we propose the concept of a brain-inspired AI agent and analyze how to extract relatively feasible and agent-compatible cortical region functionalities and their associated functional connectivity networks from the complex mechanisms of the human brain. Implementing these structures within an agent enables it to achieve basic cognitive intelligence akin to human capabilities. Finally, we explore the limitations and challenges for realizing brain-inspired agents and discuss their future development.

cs.NE↗

arXiv2024

DaDu-E: Rethinking the Role of Large Language Model in Robotic Computing Pipeline

Performing complex tasks in open environments remains challenging for robots, even when using large language models (LLMs) as the core planner. Many LLM-based planners are inefficient due to their large number of parameters and prone to inaccuracies because they operate in open-loop systems. We think the reason is that only applying LLMs as planners is insufficient. In this work, we propose DaDu-E, a robust closed-loop planning framework for embodied AI robots. Specifically, DaDu-E is equipped with a relatively lightweight LLM, a set of encapsulated robot skill instructions, a robust feedback system, and memory augmentation. Together, these components enable DaDu-E to (i) actively perceive and adapt to dynamic environments, (ii) optimize computational costs while maintaining high performance, and (iii) recover from execution failures using its memory and feedback mechanisms. Extensive experiments on real-world and simulated tasks show that DaDu-E achieves task success rates comparable to embodied AI robots with larger models as planners like COME-Robot, while reducing computational requirements by $6.6 \times$. Users are encouraged to explore our system at: \url{https://rlc-lab.github.io/dadu-e/}.

cs.RO↗