arXiv Science⌕ Search

arXiv subjects

Bingyang Liu

Publications and source records attributed to Bingyang Liu.

12 recordsLinked to original sources

CleanRoute: Reconciling DRC Compliance, Post-Layout Performance, and Runtime in Analog Routing

Automated analog routing remains a long-standing challenge because design-rule checking (DRC) compliance, post-layout performance preservation, and runtime reduction are difficult to achieve together. Existing analog routers have limited coverage of joined-metal design rules, lack control over topology-induced mismatch, and face a trade-off between DRC violations and runtime on uniform routing grids. In this paper, we introduce CleanRoute, an analog router that reconciles these three targets. Hierarchical rule enforcement assigns DRC checks and repairs to stages where the required geometry is complete, covering rules both between separate metal and where metal joins. IR-drop isolation constructs supply trees from current-mirror relationships and device currents to reduce topology-induced mismatch that geometric matching cannot eliminate and voltage drops along high-current paths. A flush-line grid adds net-specific lines aligned with device-metal edges to a coarse routing grid, providing DRC-compliant connections without uniform refinement. Experiments on ten operational transconductance amplifiers (OTAs) in a commercial 40nm process show that CleanRoute produces DRC-clean and functional layouts that pass layout versus schematic (LVS) checking on all benchmarks, with the strongest overall performance preservation and a median routing runtime of 8.82s, whereas the baselines produce no DRC-clean layouts.

cs.AR↗

CASCoDe: A Closed-Loop Agentic Framework for Analog Sizing and Layout Co-Design

Expert analog layouts differ from auto-generated ones in density and regularity, not only in legality: experts make a succession of discrete, hierarchical physical decisions and revisit each after extracted electrical results, while most existing automated flows act on a physical search space fixed before the controller runs. We present CASCoDe, a closed-loop LLM agent framework for analog netlist-to-layout design that formalizes those expert decisions as a hierarchical discrete action space-sizing selection, structural floorplan, local layout refinement, routing-attempt selection-on which the agent runs feedback-driven tree search from a circuit netlist to a verified GDS. The agent authors the circuit-specific floorplans and scripts, and an execution layer of interface adaptations over adapted tools make every action land at physical implementation and be judged by DRC, LVS, and extracted-RC simulation. On 20 SKY130 amplifiers spanning single-, two-, and three-stage topologies, CASCoDe is the only flow that delivers a DRC- and LVS-clean routed layout when meeting design specifications for every circuit. It reduces area by 59-85% (mean 71%) against a conventional P&R flow on identical PCells, raises mean device density from 0.39 to 0.74 against APPlace, MAGICAL, ALIGN and ICPI. A layout that beats every baseline in area and legality appears after 11 minutes of agent time on average, and ablations show that the structured action space and the feedback-guided tree search each reduce area and search cost.

cs.AI↗

APPlace: Co-Optimizing Device Locations and Access Points for Routing-Aware Analog Placement

Analog layout automation remains challenging in Analog/Mixed-Signal circuit design, because parasitics and mismatches introduced during layout strongly affect circuit performance. Placement is especially critical among the layout stages, as it constrains the routing solution space and the achievable post-layout performance. Existing analytical placement methods optimize device coordinates under center-based wirelength proxies and leave access point (AP) selection to routing. In analog circuits, however, a routing pin is an extended piece of terminal metal rather than a fixed point, and the best AP on it depends on where the other connected devices are placed, so a coordinate-only placement optimizes for connection points that the router will not use. We present APPlace, a routing-aware analog placement framework that co-optimizes device locations and AP selections during global placement, followed by a legalization stage that preserves the structure established by global placement. Experimental results on four real-world analog benchmarks show that APPlace achieves better overall post-layout performance than representative baselines at comparable layout area. Ablation studies further show that removing AP co-optimization causes up to a 13 dB CMRR loss among the OTA benchmarks and a 23% increase in comparator delay.

cs.AR↗

D-Pingmesh: Dynamic Probing and Fault Localization for Reconfigurable Datacenter Networks

Pingmesh monitors datacenter networks through periodic pings between servers. In reconfigurable datacenter networks, topology engineering (TPE) and traffic engineering (TE) make uniform server-pair probing inefficient: a pinglist wastes budget retesting common paths while missing low-probability interfaces. Frequent control-plane updates further require rapid pinglist refresh, and cause path ambiguity at control-plane boundaries for fault localization. We present D-Pingmesh, a probing and fault-localization system co-designed with the TPE/TE control plane. Its control-plane-aware generator builds task-efficient pinglists by greedily admitting probes with high interface coverage under the current TPE/TE snapshot. An incremental replay-and-repair mechanism updates pinglists across reconfigurations rather than recomputing from scratch. At control-plane boundaries, a Rho-EM localizer jointly infers per-task old/new-path mixture weights and the fault set through EM-style iteration. We evaluate D-Pingmesh on an 8-pod reconfigurable topology under dynamic TPE/TE. At a 0.99 coverage target, D-Pingmesh uses 17.7x fewer tasks than Pingmesh and generates each pinglist about 5.1x faster than RD-Probe. In ns-3 simulation, boundary-aware localization improves micro F1 from 0.871 to 0.953 over the deTector PLL baseline. A testbed deployment demonstrates second-scale fault localization with low host overhead. These results demonstrate that D-Pingmesh is practical for reconfigurable datacenter networks with control-plane-aware monitoring.

cs.NI↗

Simulation-Aware In-Context Policy Improvement for LLM-Aided Analog Layout Refinement

Analog IC layout design remains a labor-intensive iterative process dominated by simulation-driven refinement. Although end-to-end layout generators accelerate initial placement and routing, they still require experts to manually tune layout optimization parameters with repeated post-layout simulations for stringent design specifications. While Bayesian Optimization (BO) is widely adopted for parameter tuning in analog IC design, at the layout level it typically requires hundreds to thousands of evaluations, each involving costly parasitic extraction and post-layout simulation, which makes it impractical. Recently, Large Language Models (LLMs) have demonstrated potential in improving the sample efficiency of such simulation-driven tuning. However, their restricted access to geometric layout context and design-specific heuristics limits their ability to manipulate the layout optimization process. In this paper, we propose a simulation-aware LLM multi-agent framework that performs in-context policy improvement (ICPI) by iteratively updating layout optimization parameters exposed by an analog layout generator through an act-observe-reflect loop on compact structured layout representations. Experiments on real-world analog circuits show that, with only tens of post-layout simulations, our approach improves post-layout performance over the generator's built-in heuristics and BO-based tuning method.

cs.AI↗

PANDA: An LLM-Enhanced Performance-Driven Analog Design Framework Bridging Design Intent and Layout Generation

Traditional design of analog circuits heavily relies on manual interventions across topology, sizing, and layout, with prior automation addressing stages in isolation. In this work, we propose PANDA, an LLM-enhanced framework that bridges high-level design intent to final layout by actively managing cross-stage dependencies through guided topology synthesis, substructure-aware sizing, and constraint-driven layout generation. This shifts automation from algorithm-centric execution to intent-centric co-design, reducing turnaround time from days or weeks to hours while improving design performance.

cs.AR↗

Varuna: Enabling Failure-Type Aware RDMA Failover

RDMA link failures can render connections temporarily unavailable, causing both performance degradation and significant recovery overhead. To tolerate such failures, production datacenters assign each primary link with a standby link and, upon failure, uniformly retransmit all in-flight RDMA request over the backup path. However, we observe that such blanket retransmission is unnecessary. In-flight requests can be split into pre-failure and post-failure categories depending on whether the responder has already executed. Retransmitting post-failure requests is not only redundant (consuming bandwidth), but also incorrect for non-idempotent operations, where duplicate execution can violate application semantics. We present Varuna, a failure-type-aware RDMA recovery mechanism that enables correct retransmission and us-level failover. Varuna piggybacks a lightweight completion log on every RDMA operation; after a link failure, this log deterministically reveals which in-flight requests were executed (post-failure) and which were lost (pre-failure). Varuna then retransmits only the pre-failure subset and fetches/recovers the return values for post-failure requests. Evaluated using synthetic microbenchmarks and end-to-end RDMA TPC-C transactions, Varuna incurs only 0.6-10% steady-state latency overhead in realistic applications, eliminates 65% of recovery retransmission time, preserves transactional consistency, and introduces zero connectivity rebuild overhead and negligible memory overhead during RDMA failover.

cs.DC↗

Supercharging Packet-level Network Simulation of Large Model Training via Memoization and Fast-Forwarding

Packet-level discrete-event simulation (PLDES) is a prevalent tool for evaluating detailed performance of large model training. Although PLDES offers high fidelity and generality, its slow performance has plagued networking practitioners. Existing optimization techniques either simplify the network model, resulting in large errors; or execute it in parallel using multiple processors, with an upper bound on speedup. This paper explores an alternative optimization direction that reduces the computational loads of PLDES while maintaining high fidelity. Our key insight is that, in distributed LLM training, packet-level traffic behaviors often exhibit repetitive contention patterns and steady-states where flow rates stabilize, ignoring these redundant discrete events speeds up the simulation considerably and the error is negligible. We realize this idea by proposing Wormhole, a user-transparent PLDES kernel capable of automatically memoization for unsteady-states and skipping for steady-states. Wormhole adopts network partitioning, state memoization and reuse, and rate-based steady-state identification to accurately determine the periods of each flow's steady-state, while maintaining simulation consistency after fast-forwarding. Experiments demonstrate that Wormhole can achieve a 744x speedup over the original ns-3 (510x for MoE workload), with a bounded error of <1%. Applying current multithreading parallel techniques and Wormhole together allows a 1012x speedup, reducing the simulation time for one GPT-13B training under 128 GPUs from 9 hours to 5 minutes.

cs.NI↗

UB-Mesh: a Hierarchically Localized nD-FullMesh Datacenter Network Architecture

As the Large-scale Language Models (LLMs) continue to scale, the requisite computational power and bandwidth escalate. To address this, we introduce UB-Mesh, a novel AI datacenter network architecture designed to enhance scalability, performance, cost-efficiency and availability. Unlike traditional datacenters that provide symmetrical node-to-node bandwidth, UB-Mesh employs a hierarchically localized nD-FullMesh network topology. This design fully leverages the data locality of LLM training, prioritizing short-range, direct interconnects to minimize data movement distance and reduce switch usage. Although UB-Mesh's nD-FullMesh topology offers several theoretical advantages, its concrete architecture design, physical implementation and networking system optimization present new challenges. For the actual construction of UB-Mesh, we first design the UB-Mesh-Pod architecture, which is based on a 4D-FullMesh topology. UB-Mesh-Pod is implemented via a suite of hardware components that serve as the foundational building blocks, including specifically-designed NPU, CPU, Low-Radix-Switch (LRS), High-Radix-Switch (HRS), NICs and others. These components are interconnected via a novel Unified Bus (UB) technique, which enables flexible IO bandwidth allocation and hardware resource pooling. For networking system optimization, we propose advanced routing mechanism named All-Path-Routing (APR) to efficiently manage data traffic. These optimizations, combined with topology-aware performance enhancements and robust reliability measures like 64+1 backup design, result in 2.04x higher cost-efficiency, 7.2% higher network availability compared to traditional Clos architecture and 95%+ linearity in various LLM training tasks.

cs.AR↗

LayoutCopilot: An LLM-powered Multi-agent Collaborative Framework for Interactive Analog Layout Design

Analog layout design heavily involves interactive processes between humans and design tools. Electronic Design Automation (EDA) tools for this task are usually designed to use scripting commands or visualized buttons for manipulation, especially for interactive automation functionalities, which have a steep learning curve and cumbersome user experience, making a notable barrier to designers' adoption. Aiming to address such a usability issue, this paper introduces LayoutCopilot, a pioneering multi-agent collaborative framework powered by Large Language Models (LLMs) for interactive analog layout design. LayoutCopilot simplifies human-tool interaction by converting natural language instructions into executable script commands, and it interprets high-level design intents into actionable suggestions, significantly streamlining the design process. Experimental results demonstrate the flexibility, efficiency, and accessibility of LayoutCopilot in handling real-world analog designs.

cs.AR↗

Explaining muon excess in cosmic rays using the gluon condensation model

Ultrahigh-energy cosmic rays are often characterized indirectly by analyzing the properties of secondary cosmic ray particles produced in the collisions with air nuclei. The particle number $N_μ$ of muon and the depth of shower maximum $X_\mathrm{max}$ after air shower cascade are mostly studied to infer the energy and mass of the incident cosmic rays. Research have shown that there is a significant excess in the observed number of muons arriving at the ground from extensive air showers (EAS) compared to the simulations using the existing cosmic ray hadronic interaction model. To explain this muon excess phenomenon, a new theoretical model, the gluon condensation model (GC model), is introduced in this paper and simulated by using the AIRES engine. We assume that the GC effect appears mainly in the first collision of the cascade leading to a significant increase in the strangeness production, consequently, the production rate of kaons is increased and $n_K/n_π$ is greater than the value of the usual hadronic interaction process. In the calculation, the model assumes that only pions and kaons are produced in GC state. The increase of strange particle yield would mean that the energy transferred from the hadronic cascade to electromagnetic cascade through $π^{0} \rightarrow 2γ$ decay is reduced. This would in turn increase the number of muons at the ground level due to meson decays.Our model provides a new theoretical possibility to explain the muon excess puzzle.

astro-ph.HE↗

An experiment in distributed Internet address management using blockchains

The current system to manage the global pool of IP addresses is centralized in five transnational organizations, the Regional Internet Registries (RIRs). Each of these RIRs manage the address pool for a large number of countries. Because the RIRs are private organizations, they are subject to the legal framework of the country where they are based. This configuration results in a jurisdictional overflow from the legal framework of the countries where the RIR is based to all the countries that the RIRs are serving (the countries served by the RIRs de facto become subjects of the legal system of the country where the RIR is hosted). The situation is aggravated by the deployment of new security techniques such as the RPKI and BGPsec, that enable enforcement of allocations by the RIRs. In this paper we present InBlock, a blockchain-based distributed governance body aimed to provide de-centralized management of IP addresses. InBlock also aims to fulfil the same objectives as the current IP address allocation system, namely, uniqueness, fairness, conservation, aggregation, registration and minimized overhead. InBlock is implemented as a Decentralized Autonomous Organization, i.e., as a set of blockchain's smart contracts in Ethereum. Any entity may request an allocation of addresses to the InBlock registry by solely performing a (crypto)currency transfer to the InBlock. The fee required, along with the annual renewal fee, serves as a mechanism to deter stockpiling and other wasteful practices. As with any novel technology, there are many open questions about the usage of blockchains to build an IP address registry. For this reason, we believe that practical experimentation is required in order to have hands-on experiences about such a system. We propose to conduct an experiment on distributed address management using InBlock as a starting point to inform future directions in this area.

cs.NI↗