arXiv subjects

Binghan He

Publications and source records attributed to Binghan He.

16 recordsLinked to original sources

arXiv2026

Design and Control of a Compact Series Elastic Actuator Module for Robots in MRI Scanners

Robotic assistance has broadened the capabilities of magnetic resonance imaging (MRI)-guided medical interventions, yet force-controlled actuators tailored for MRI environments remain limited. In this study, we present a novel MRI-compatible rotary series elastic actuator (SEA) module that employs velocity-sourced ultrasonic motors for force-controlled operation within MRI scanners. Unlike prior MRI-compatible SEA designs, our module uses a transmission force sensing SEA architecture, with four off-the-shelf compression springs placed between the gearbox and motor housings. To enable precise torque control, we develop a controller based on a disturbance observer, specifically designed for velocity-sourced motors. This controller improves torque regulation, even under varying external impedance, enhancing the actuator's suitability for MRI-guided medical interventions. Experimental validation confirms effective torque control in both 3 Tesla MRI and non-MRI settings, achieving a 5% settling time of 0.05 seconds and steady-state error within 2.5% of the actuator's maximum output torque. Notably, the controller maintains consistent performance across both low and high impedance conditions.

cs.RO↗

arXiv2024

Safety Control of Uncertain MIMO Systems Using Dynamic Output Feedback Barrier Pairs

Safety control of dynamical systems using barrier functions relies on knowing the full state information. This paper introduces a novel approach for safety control in uncertain MIMO systems with partial state information. The proposed method combines the synthesis of a vector norm barrier function and a dynamic output feedback safety controller to ensure robust safety enforcement. The safety controller guarantees the invariance of the barrier function under uncertain dynamics and disturbances. To address the challenges associated with safety verification using partial state information, a barrier function estimator is developed. This estimator employs an identifier-based state estimator to obtain a state estimate that is affine in the uncertain model parameters of the system. By incorporating a priori knowledge of the limits of the uncertain model parameters and disturbances, the state estimate provides a robust upper bound for the barrier function. Comparative analysis with existing control barrier function based methods shows the advantage of the proposed approach in enforcing safety constraints under tight input constraints and the utilization of estimated state information.

eess.SY↗

arXiv2023

Barrier Pairs for Safety Control of Uncertain Output Feedback Systems

The barrier function method for safety control typically assumes the availability of full state information. Unfortunately, in many scenarios involving uncertain dynamical systems, full state information is often unavailable. In this paper, we aim to solve the safety control problem for an uncertain single-input single-output system with partial state information. First, we develop a synthesis method that simultaneously creates a barrier function and a dynamic output feedback safety controller. This safety controller guarantees that the unit sub-level set of the barrier function is an invariant set under the uncertain dynamics and disturbances of the system. Then, we build an identifier-based estimator that provides a state estimate affine to the uncertain model parameters of the system. To detect the potential risks of the system, a fault detector uses the state estimate to find an upper bound for the barrier function. The fault detector triggers the safety controller when the system's original action leads to a potential safety issue and resumes the original action when the potential safety issue is resolved by the safety controller.

eess.SY↗

arXiv2022

Versatile van der Waals Heterostructures of Gamma-GeSe with h-BN/Graphene/MoS2

Recent discovery of a novel hexagonal phase of GeSe (Gamma-GeSe) has triggered great interests in nanoelectronics applications owing to its electrical conductivity of bulk phase even higher than graphite while its monolayer is a semiconductor. For potential applications, construction of functional two-dimensional (2D) contacts is indispensable. Herein, via first-principles calculations, we propose the design of van der Waals heterostructures (vdWHs) of Gamma-GeSe contacting respectively with graphene, 2D h-BN and MoS2, as representatives of metallic, insulator, and semiconductor partners. Our work shows that the h-BN or graphene layer donates electrons to the Gamma-GeSe layer, resulting in n doping in Gamma-GeSe, while the MoS2 layer accepts electrons from the Gamma-GeSe layer leading to p doping of the latter. The Gamma-GeSe/BN heterostructure has a type-I band alignment with large band offsets, indicating that BN can be used as an effective passivating layer to protect Gamma-GeSe from its environmental disturbance while maintaining its major electronic and optical characteristics. For Gamma-GeSe/graphene heterostructure, it is prone to have a very low-Schottky barrier down to tens of meV, easily overcome by thermal excitation, which can be tunable by strain and external electric field. The Gamma-GeSe/MoS2 vdWH forms a Z-scheme interface, which is beneficial for carriers splitting and photon utilization. Our work indicates that Gamma-GeSe can be well passivated by BN, and form intimate contact with graphene for high charge injection efficiency and with MoS2 for efficient carriers splitting for redox reactions.

cond-mat.mtrl-sci↗

arXiv2022

Highly Modulated Dual Semimetal and Semiconducting Gamma-GeSe with Strain Engineering

Layered hexagonal Gamma--GeSe, a new polymorph of GeSe synthesized recently, shows strikingly high electronic conductivity in its bulk form (even higher than graphite) while semiconducting in the case of monolayer (1L). In this work, by using first-principles calculations, we demonstrate that, different from its orthorhombic phases of GeSe, the Gamma--GeSe shows a small spatial anisotropic dependence and a strikingly thickness-dependent behavior with transition from semimetal (bulk, 0.04 eV) to semiconductor (1L, 0.99 eV), and this dual conducting characteristic realized simply with thickness control in Gamma-GeSe has not been found in other 2D materials before. The lacking of d-orbital allows charge carrier with small effective mass (0.16 m0 for electron and 0.23 m0 for hole) which is comparable to phosphorene. Meanwhile, 1L Gamma--GeSe shows a superior flexibility with Young's modulus of 86.59 N/m, only one-quarter of that of graphene and three-quarters of that of MoS2, and Poisson's ratio of 0.26, suggesting a highly flexible lattice. Interestingly, 1L Gamma-GeSe shows an in-plane isotropic elastic modulus inherent with hexagonal symmetry while an anisotropic in-plane effective mass owing to shifted valleys around the band edges. We demonstrate the feasibility of strain engineering in inducing indirect-direct and semiconductor-metal transitions resulting from competing bands at the band edges. Our work shows that the free 1L Gamma-GeSe shows a strong light absorption (~106 cm-1) and an indirect bandgap with rich valleys at band edges, enabling high carrier concentration and a low rate of direct electron-hole recombination which would be promising for nanoelectronics and solar cell applications.

cond-mat.mtrl-sci↗

arXiv2022

Oxygen Deficient α-MoO3 with Promoted Adsorption and State-Quenching of H2O for Gas Sensor: A DFT Study

Semiconducting oxides with reducible cations are ideal platforms for various functional applications in nanoelectronics and catalysts. Here we report an ultrathin monolayer alpha-MoO3 where tunable electronic properties and different gas adsorbing behaviors upon introducing the oxygen vacancies (VO). The unique property of alpha-MoO3 is that it contains three different types of oxygen atoms occupying three Wyckoff sites that are absent in other low-dimensional oxides and provides rich electronic hybridized states. The presence of VO triggers intermediate state in the gap at ~0.59 eV below the conduction band minimum and reduces the work function dramatically, together with new excitations at near infrared. The realigned Fermi level associated with the dangling state of VO reduces the neighboring Mo atoms and affects the gas adsorption thereafter. The binding energy of H2O molecules above VO is 2.5 times up to -0.75 eV compared with that of perfect lattice site and trends of transfer of electrons also reverse. The latter is related with the shallow localized state in the band gap due to H2O adsorbed above perfect MoO3 which becomes quenched upon adsorbing at the VO site. Those rich in-gap defective states in oxygen deficient MoO3, broadening the light absorption and promoting the uptake of water, are conductive to the application of alpha-MoO3 for optoelectronics, photothermal therapy, and sensor of moisture.

cond-mat.mtrl-sci↗

arXiv2021

A Barrier Pair Method for Safe Human-Robot Shared Autonomy

Shared autonomy provides a framework where a human and an automated system, such as a robot, jointly control the system's behavior, enabling an effective solution for various applications, including human-robot interaction. However, a challenging problem in shared autonomy is safety because the human input may be unknown and unpredictable, which affects the robot's safety constraints. If the human input is a force applied through physical contact with the robot, it also alters the robot's behavior to maintain safety. We address the safety issue of shared autonomy in real-time applications by proposing a two-layer control framework. In the first layer, we use the history of human input measurements to infer what the human wants the robot to do and define the robot's safety constraints according to that inference. In the second layer, we formulate a rapidly-exploring random tree of barrier pairs, with each barrier pair composed of a barrier function and a controller. Using the controllers in these barrier pairs, the robot is able to maintain its safe operation under the intervention from the human input. This proposed control framework allows the robot to assist the human while preventing them from encountering safety issues. We demonstrate the proposed control framework on a simulation of a two-linkage manipulator robot.

cs.RO↗

arXiv2020

A Complex Stiffness Human Impedance Model with Customizable Exoskeleton Control

The natural impedance, or dynamic relationship between force and motion, of a human operator can determine the stability of exoskeletons that use interaction-torque feedback to amplify human strength. While human impedance is typically modelled as a linear system, our experiments on a single-joint exoskeleton testbed involving 10 human subjects show evidence of nonlinear behavior: a low-frequency asymptotic phase for the dynamic stiffness of the human that is different than the expected zero, and an unexpectedly consistent damping ratio as the stiffness and inertia vary. To explain these observations, this paper considers a new frequency-domain model of the human joint dynamics featuring complex value stiffness comprising a real stiffness term and a hysteretic damping term. Using a statistical F-test we show that the hysteretic damping term is not only significant but is even more significant than the linear damping term. Further analysis reveals a linear trend linking hysteretic damping and the real part of the stiffness, which allows us to simplify the complex stiffness model down to a 1-parameter system. Then, we introduce and demonstrate a customizable fractional-order controller that exploits this hysteretic damping behavior to improve strength amplification bandwidth while maintaining stability, and explore a tuning approach which ensures that this stability property is robust to muscle co-contraction for each individual.

cs.RO↗

arXiv2020

BP-RRT: Barrier Pair Synthesis for Temporal Logic Motion Planning

For a nonlinear system (e.g. a robot) with its continuous state space trajectories constrained by a linear temporal logic specification, the synthesis of a low-level controller for mission execution often results in a non-convex optimization problem. We devise a new algorithm to solve this type of non-convex problems by formulating a rapidly-exploring random tree of barrier pairs, with each barrier pair composed of a quadratic barrier function and a full state feedback controller. The proposed method employs a rapid-exploring random tree to deal with the non-convex constraints and uses barrier pairs to fulfill the local convex constraints. As such, the method solves control problems fulfilling the required transitions of an automaton in order to satisfy given linear temporal logic constraints. At the same time it synthesizes locally optimal controllers in order to transition between the regions corresponding to the alphabet of the automaton. We demonstrate this new algorithm on a simulation of a two linkage manipulator robot.

cs.RO↗

arXiv2020

Robust Estimator-Based Safety Verification: A Vector Norm Approach

In this paper, we consider the problem of verifying safety constraint satisfaction for single-input single-output systems with uncertain transfer function coefficients. We propose a new type of barrier function based on a vector norm. This type of barrier function has a measurable upper bound without full state availability. An identifier-based estimator allows an exact bound for the uncertainty-based component of the barrier function estimate. Assuming that the system is safe initially allows an exponentially decreasing bound on the error due to the estimator transient. Barrier function and estimator synthesis is proposed as two convex sub-problems, exploiting linear matrix inequalities. The barrier function controller combination is then used to construct a safety backup controller. And we demonstrate the system in a simulation of a 1 degree-of-freedom human-exoskeleton interaction.

math.OC↗

arXiv2020

Adaptive Compliance Shaping with Human Impedance Estimation

Human impedance parameters play an integral role in the dynamics of strength amplification exoskeletons. Many methods are used to estimate the stiffness of human muscles, but few are used to improve the performance of strength amplification controllers for these devices. We propose a compliance shaping amplification controller incorporating an accurate online human stiffness estimation from surface electromyography (sEMG) sensors and stretch sensors connected to the forearm and upper arm of the human. These sensor values along with exoskeleton position and velocity are used to train a random forest regression model that accurately predicts a person's stiffness despite varying movement, relaxation, and muscle co-contraction. Our model's accuracy is verified using experimental test data and the model is implemented into the compliance shaping controller. Ultimately we show that the online estimation of stiffness can improve the bandwidth and amplification of the controller while remaining robustly stable.

eess.SY↗

arXiv2020

Complex Stiffness Model of Physical Human-Robot Interaction: Implications for Control of Performance Augmentation Exoskeletons

Human joint dynamic stiffness plays an important role in the stability of performance augmentation exoskeletons. In this paper, we consider a new frequency domain model of the human joint dynamics which features a complex value stiffness. This complex stiffness consists of a real stiffness and a hysteretic damping. We use it to explain the dynamic behaviors of the human connected to the exoskeleton, in particular the observed non-zero low frequency phase shift and the near constant damping ratio of the resonant as stiffness and inertia vary. We validate this concept by experimenting with an elbow-joint exoskeleton testbed on a subject while modifying joint stiffness behavior, exoskeleton inertia, and strength augmentation gains. We compare three different models of elbow-joint dynamic stiffness: a model with real stiffness, viscous damping and inertia, a model with complex stiffness and inertia, and a model combining the previous two models. Our results show that the hysteretic damping term improves modeling accuracy, using a statistical F-test. Moreover this improvement is statistically more significant than using classical viscous damping term. In addition, we experimentally observe a linear relationship between the hysteretic damping and the real part of the stiffness which allows us to simplify the complex stiffness model as a 1-parameter system. Ultimately, we design a fractional order controller to demonstrate how human hysteretic damping behavior can be exploited to improve strength amplification performance while maintaining stability.

cs.RO↗

arXiv2019

Safety Control Synthesis with Input Limits: a Hybrid Approach

We introduce a hybrid (discrete--continuous) safety controller which enforces strict state and input constraints on a system---but only acts when necessary, preserving transparent operation of the original system within some safe region of the state space. We define this space using a Min-Quadratic Barrier function, which we construct along the equilibrium manifold using the Lyapunov functions which result from linear matrix inequality controller synthesis for locally valid uncertain linearizations. We also introduce the concept of a barrier pair, which makes it easy to extend the approach to include trajectory-based augmentations to the safe region, in the style of LQR-Trees. We demonstrate our controller and barrier pair synthesis method in simulation-based examples.

math.OC↗

arXiv2019

Modeling and Loop Shaping of Single-Joint Amplification Exoskeleton with Contact Sensing and Series Elastic Actuation

In this paper we consider a class of exoskeletons designed to amplify the strength of humans through feedback of sensed human-robot interactions and actuator forces. We define an amplification error signal based on a reference amplification rate, and design a linear feedback compensator to attenuate this error. Since the human operator is an integral part of the system, we design the compensator to be robust to both a realistic variation in human impedance and a large variation in load impedance. We demonstrate our strategy on a one-degree of freedom amplification exoskeleton connected to a human arm, following a three dimensional matrix of experimentation: slow or fast human motion; light or extreme exoskeleton load; and soft or clenched human arm impedances. We demonstrate that a slightly aggressive controller results in a borderline stable system---but only for soft human musculoeskeletal behavior and a heavy load. This class of exoskeleton systems is interesting because it can both amplify a human's interaction forces --- so long as the human contacts the environment through the exoskeleton --- and attenuate the operator's perception of the exoskeleton's reflected dynamics at frequencies within the bandwidth of the control.

eess.SY↗

arXiv2019

Decentralized Control Systems Laboratory Using Human Centered Robotic Actuators

University laboratories deliver unique hands-on experimentation for STEM students but often lack state-of-the-art equipment and provide limited access to their equipment. The University of Texas Cloud Laboratory provides remote access to a cutting-edge series elastic actuators for student experimentation regarding human-centered robotics, dynamical systems, and controls. Through a browser-based interface, students are provided with various learning materials using the remote hardware-in-the-loop system for effective experiment-based education. This paper discusses the methods used to connect remote hardware to mobile browsers, the adaptation of textbook materials regarding system identification and feedback control, data processing to generate clean and useful results for student interpretation, and initial usage of the end-to-end system for individual and group learning.

cs.RO↗

arXiv2016

Web Based Teleoperation of a Humanoid Robot

The Cloud-based Advanced Robotics Laboratory (CARL) integrates a whole body controller and web-based teleoperation to enable any device with a web browser to access and control a humanoid robot. By integrating humanoid robots with the cloud, they are accessible from any Internet-connected device. Increased accessibility is important because few people have access to state-of-the-art humanoid robots limiting their rate of development. CARL's implementation is based on modern software libraries, frameworks, and middleware including Node.js, Socket.IO, ZMQ, ROS, Robot Web Tools, and ControlIt! Feasibility is demonstrated by having inexperienced human operators use a smartphone's web-browser to control Dreamer, a torque-controlled humanoid robot based on series elastic actuators, and make it perform a dual-arm manipulation task. The implementation serves as a proof-of-concept and foundation upon which many advanced humanoid robot technologies can be researched and developed.

cs.RO↗