arXiv subjects
Publications and source records attributed to Bin Xu.
We find the explicit local models of isolated singularities of conformal hyperbolic metrics by Complex Analysis, which is interesting in its own and could potentially be extended to high-dimensional case.
GaN-based HEMTs have the potential to be widely used in high-power and high-frequency electronics while their maximum output powers are limited by high channel temperature induced by near-junction Joule-heating, which degrades device performance and reliability. Increasing the TBC between GaN and SiC will aid in the heat dissipation of GaN-on-SiC power devices, taking advantage of the high thermal conductivity of the SiC substrate. However, a good understanding of the TBC of this technically important interface is still lacking due to the complicated nature of interfacial heat transport. In this work, a lattice-mismatch-insensitive surface activated bonding method is used to bond GaN directly to SiC and thus eliminating the AlN layer altogether. This allows for the direct integration of high quality GaN layers with SiC to create a high thermal boundary conductance interface. TDTR is used to measure the thermal properties of the GaN thermal conductivity and GaN-SiC TBC. The measured GaN thermal conductivity is larger than that of GaN grown by MBE on SiC, showing the impact of reducing the dislocations in the GaN near the interface. High GaN-SiC TBC is observed for the bonded GaN-SiC interfaces, especially for the annealed interface whose TBC (230 MW/m2-K) is close to the highest values ever reported. To understand the structure-thermal property relation, STEM and EELS are used to characterize the interface structure. The results show that, for the as-bonded sample, there exists an amorphous layer near the interface for the as bonded samples. This amorphous layer is crystallized upon annealing, leading to the high TBC found in our work. Our work paves the way for thermal transport across bonded interfaces, which will impact real-world applications of semiconductor integration and packaging.
In a complex system, the interactions between individual agents often lead to emergent collective behavior like spontaneous synchronization, swarming, and pattern formation. The topology of the network of interactions can have a dramatic influence over those dynamics. In many studies, researchers start with a specific model for both the intrinsic dynamics of each agent and the interaction network, and attempt to learn about the dynamics that can be observed in the model. Here we consider the inverse problem: given the dynamics of a system, can one learn about the underlying network? We investigate arbitrary networks of coupled phase-oscillators whose dynamics are characterized by synchronization. We demonstrate that, given sufficient observational data on the transient evolution of each oscillator, one can use machine learning methods to reconstruct the interaction network and simultaneously identify the parameters of a model for the intrinsic dynamics of the oscillators and their coupling.
The beetle antennae search algorithm was recently proposed and investigated for solving global optimization problems. Although the performance of the algorithm and its variants were shown to be better than some existing meta-heuristic algorithms, there is still a lack of convergence analysis. In this paper, we provide theoretical analysis on the convergence of the beetle antennae search algorithm. We test the performance of the BAS algorithm via some representative benchmark functions. Meanwhile, some applications of the BAS algorithm are also presented.
Many telepresence robots are equipped with a forward-facing camera for video communication and a downward-facing camera for navigation. In this paper, we propose to stitch videos from the FF-camera with a wide-angle lens and the DF-camera with a fisheye lens for telepresence robots. We aim at providing more compact and efficient visual feedback for the user interface of telepresence robots with user-friendly interactive experiences. To this end, we present a multi-homography-based video stitching method which stitches videos from a wide-angle camera and a fisheye camera. The method consists of video image alignment, seam cutting, and image blending. We directly align the wide-angle video image and the fisheye video image based on the multi-homography alignment without calibration, distortion correction, and unwarping procedures. Thus, we can obtain a stitched video with shape preservation in the non-overlapping regions and alignment in the overlapping area for telepresence. To alleviate ghosting effects caused by moving objects and/or moving cameras during telepresence robot driving, an optimal seam is found for aligned video composition, and the optimal seam will be updated in subsequent frames, considering spatial and temporal coherence. The final stitched video is created by image blending based on the optimal seam. We conducted a user study to demonstrate the effectiveness of our method and the superiority of telepresence robots with a stitched video as visual feedback.
For $n\ge5$, it is well known that the moduli space $\mathfrak{M_{0,\:n}}$ of unordered $n$ points on the Riemann sphere is a quotient space of the Zariski open set $K_n$ of $\mathbb C^{n-3}$ by an $S_n$ action. The stabilizers of this $S_n$ action at certain points of this Zariski open set $K_n$ correspond to the groups fixing the sets of $n$ points on the Riemann sphere. Let $α$ be a subset of $n$ distinct points on the Riemann sphere. We call the group of all linear fractional transformations leaving $α$ invariant the stabilizer of $α$, which is finite by observation. For each non-trivial finite subgroup $G$ of the group ${\rm PSL}(2,{\Bbb C})$ of linear fractional transformations, we give the necessary and sufficient condition for finite subsets of the Riemann sphere under which the stabilizers of them are conjugate to $G$. We also prove that there does exist some finite subset of the Riemann sphere whose stabilizer coincides with $G$. Next we obtain the irreducible decompositions of the representations of the stabilizers on the tangent spaces at the singularities of $\mathfrak{M_{0,\:n}}$. At last, on $\mathfrak{M_{0,\:5}}$ and $\mathfrak{M_{0,\:6}}$, we work out explicitly the singularities and the representations of their stabilizers on the tangent spaces at them.
We classify the finite groups associated to the singularities of the moduli space of $n/ge5$ unordered points on the Riemann sphere. We also realize the classification by an algorithm.
In this manuscript, by using Belyi maps and dessin d'enfants, we construct some concrete examples of Strebel differentials with four double poles on the Riemann sphere. As an application, we could give some explicit cone spherical metrics on the Riemann sphere.
We establish a correspondence on a Riemann surface between hyperbolic metrics with isolated singularities and bounded projective functions whose Schwarzian derivatives have at most double poles and whose monodromies lie in ${\rm PSU}(1,\,1)$. As an application, we construct explicitly a new class of hyperbolic metrics with countably many singularities on the unit disc.
In this paper, we study top Fourier coefficients of certain automorphic representations of $\mathrm{GL}_n(\mathbb{A})$. In particular, we prove a conjecture of Jiang on top Fourier coefficients of isobaric automorphic representations of $\mathrm{GL}_n(\mathbb{A})$ of form $$ Δ(τ_1, b_1) \boxplus Δ(τ_2, b_2) \boxplus \cdots \boxplus Δ(τ_r, b_r)\,, $$ where $Δ(τ_i,b_i)$'s are Speh representations in the discrete spectrum of $\mathrm{GL}_{a_ib_i}(\mathbb{A})$ with $τ_i$'s being unitary cuspidal representations of $\mathrm{GL}_{a_i}(\mathbb{A})$, and $n = \sum_{i=1}^r a_ib_i$. Endoscopic lifting images of the discrete spectrum of classical groups form a special class of such representations. The result of this paper will facilitate the study of automorphic forms of classical groups occurring in the discrete spectrum.
Let $G$ be a group and $H$ be a subgroup of $G$. The classical branching rule (or symmetry breaking) asks: For an irreducible representation $π$ of $G$, determine the occurrence of an irreducible representation $σ$ of $H$ in the restriction of $π$ to $H$. The reciprocal branching problem of this classical branching problem is to ask: For an irreducible representation $σ$ of $H$, find an irreducible representation $π$ of $G$ such that $σ$ occurs in the restriction of $π$ to $H$. For automorphic representations of classical groups, the branching problem has been addressed by the well-known global Gan-Gross-Prasad conjecture. In this paper, we investigate the reciprocal branching problem for automorphic representations of special orthogonal groups using the twisted automorphic descent method as developed in [JZ15]. The method may be applied to other classical groups as well.
First-principles calculations, in combination with the four-state energy mapping method, are performed to extract the magnetic interaction parameters of multiferroic BiFeO$_3$. Such parameters include the symmetric exchange (SE) couplings and the Dzyaloshinskii-Moriya (DM) interactions up to second nearest neighbors, as well as the single ion anisotropy (SIA). All magnetic parameters are obtained not only for the $R3c$ structural ground state, but also for the $R3m$ and $R\bar{3}c$ phases in order to determine the effects of ferroelectricity and antiferrodistortion distortions, respectively, on these magnetic parameters. In particular, two different second-nearest neighbor couplings are identified and their origins are discussed in details. Moreover, Monte-Carlo (MC) simulations using a magnetic Hamiltonian incorporating these first-principles-derived interaction parameters are further performed. They result (i) not only in the accurate prediction of the spin-canted G-type antiferromagnetic structure and of the known magnetic cycloid propagating along a $<$1$\bar{1}$0$>$ direction, as well as their unusual characteristics (such as a weak magnetization and spin-density-waves, respectively); (ii) but also in the finding of another cycloidal state of low-energy and that awaits to be experimentally confirmed. Turning on and off the different magnetic interaction parameters in the MC simulations also reveal the precise role of each of them on magnetism.
Cone spherical metrics are conformal metrics with constant curvature one and finitely many conical singularities on compact Riemann surfaces. A cone spherical metric is called irreducible if each developing map of the metric does not have monodromy lying in ${\rm U(1)}$. We establish on compact Riemann surfaces of positive genera a correspondence between irreducible cone spherical metrics with cone angles being integral multiples of $2π$ and line subbundles of rank two stable vector bundles. Then we are motivated by it to prove a theorem of Lange-type that there always exists a stable extension of $L^*$ by $L$, for $L$ being a line bundle of negative degree on each compact Riemann surface of genus greater than one. At last, as an application of these two results, we obtain a new class of irreducible spherical metrics with cone angles being integral multiples of $2π$ on each compact Riemann surface of genus greater than one
J. Nitsche proved that an isolated singularity of a conformal hyperbolic metric is either a conical singularity or a cusp one. We prove by developing map that there exists a complex coordinate $z$ centered at the singularity where the metric has the expression of either $\displaystyle{\frac{4α^2\vert z \vert^{2α-2}}{(1-\vert z \vert ^{2α})^2}\vert \mathrm{d} z \vert^2}$ with $α>0$ or $\displaystyle{\vert z \vert ^{-2}\big(\ln|z|\big)^{-2}|dz|^{2}}$.
We construct a texture where the Seesaw matrix is diagonalized by the TriBiMaximal (TBM) matrix with a phase. All CKM and PMNS angles are within their pdg values, and the mass relations of quarks and charged leptons extrapolated to GUT scale are satisfied, including the Gatto relation. The novel ingredient is the asymmetry of the down-quark and charged lepton Yukawa matrices. Explaining the reactor angle requires a $\require{cancel} \cancel {CP}$ phase in the TBM matrix, resulting in the Jarlskog-Greenberg invariant at $|J|=0.028$, albeit with an undetermined sign. While $SO(10)$ restrains the right-handed neutrino Majorana matrix, the neutrino masses are left undetermined.
Cone spherical metrics are conformal metrics with constant curvature one and finitely many conical singularities on compact Riemann surfaces. By using Strebel differentials as a bridge, we construct a new class of cone spherical metrics on compact Riemann surfaces by drawing on the surfaces some class of connected metric ribbon graphs.
We report on the structural, electronic and magnetic properties of a monolayer of GdAg2, forming a moiré pattern on Ag(111). Combining scanning tunneling microscopy and ab-initio spin-polarized calculations, we show that the electronic band structure can be shifted linearly via thermal dependent strain of the intra-layer atomic distance in a range between 1-7%, leading to lateral hetero-structuring. Furthermore, the coupling of the incommensurable GdAg2 alloy layer to the Ag(111) substrate leads to spatially varying atomic relaxation causing subsurface layer buckling, texturing of the electronic and spin properties, and inhomogeneity of the magnetic anisotropy energy across the layer. These results provide perspectives for a control of electronic properties and magnetic ordering in atomically-thin layers.
The maximum correntropy criterion (MCC) has recently been successfully applied in robust regression, classification and adaptive filtering, where the correntropy is maximized instead of minimizing the well-known mean square error (MSE) to improve the robustness with respect to outliers (or impulsive noises). Considerable efforts have been devoted to develop various robust adaptive algorithms under MCC, but so far little insight has been gained as to how the optimal solution will be affected by outliers. In this work, we study this problem in the context of parameter estimation for a simple linear errors-in-variables (EIV) model where all variables are scalar. Under certain conditions, we derive an upper bound on the absolute value of the estimation error and show that the optimal solution under MCC can be very close to the true value of the unknown parameter even with outliers (whose values can be arbitrarily large) in both input and output variables. Illustrative examples are presented to verify and clarify the theory.