arXiv subjects

Biagio Ciuffo

Publications and source records attributed to Biagio Ciuffo.

10 recordsLinked to original sources

arXiv2026

Virtual Testing of Automated Driving Systems through Credible Simulations

Simulation is increasingly used to support safety-related decision-making in road transport, particularly for the assessment and approval of automated driving systems (ADS). The complexity of ADS behavior and size of their operational design domains make exclusive reliance on physical testing impractical, leading to extensive use of virtual testing (VT) during the approval phase. This shift raises critical questions regarding the credibility of modelling and simulation (M&S) results used to support road safety decisions. Current VT accreditation approaches in the ADS domain typically rely on validation-only practices, which have been shown to scale poorly when applied to complex, multi-tool simulation environments. To address this limitation, this paper proposes a risk-based framework for assessing the credibility of simulation toolchains used in ADS safety evaluation, drawing inspiration from established practices in other safety-critical domains, notably NASA's STD-7009 for models and simulations. The framework extends traditional verification and validation (V&V) by explicitly linking credibility requirements to the intended use of simulation outputs and to the safety criticality of the decisions they support within the approval process. It provides a lifecycle-oriented assessment scheme integrating toolchain management, modelling assumptions and limitations, verification, validation, and sensitivity analysis. Credibility acceptance thresholds are defined proportionally, allowing differentiated requirements depending on whether simulation is used for exploratory safety analysis, partial decision support, or as a substitute for physical testing. While demonstrated for ADS, the proposed approach is directly applicable to road safety and simulation studies where VT plays a central role in safety assessment and regulatory decision-making.

cs.RO↗

arXiv2026

Beyond the Proving Ground: Independent Public-Road Testing of Assisted Lane Change Systems using LiDAR

Testing of commercial Advanced Driver Assistance Systems is essential to ensure safety and compliance during type approval and in service operation. However, proving ground scenarios may not reflect real world driving complexity, while geo fencing can require manufacturer collaboration and limit assessment independence. This work presents a methodology for independently testing Assisted Lane Change systems on public roads. A campaign on the A31 French motorway used a test vehicle equipped with a LiDAR based vehicle detection and tracking system. Tests covered combinations of inter vehicle distance and speed between the test vehicle and the take over vehicle. Real time kinematic global navigation satellite system receivers assessed detection and tracking performance. Recorded lane change trajectories were compared with the lane change suppression requirements of UNECE Regulation Number 79. Of 27 predefined lane change manoeuvres, 18 were completed and 9 suppressed. In 6 cases, the system allowed manoeuvres that did not meet regulatory minimum distance requirements. In 3 cases, the deviation remained statistically significant after accounting for measurement uncertainty. To the authors knowledge, this is the first public road campaign designed to assess Assisted Lane Change compliance with Regulation Number 79 safety distance requirements. The results demonstrate the suitability of LiDAR based sensing for this purpose. The methodology can support market surveillance and future regulatory revisions by revealing real world behaviours not covered by approval procedures.

cs.RO↗

arXiv2025

Learning to Car-Follow Using an Inertia-Oriented Driving Technique: A Before-and-After Study on a Closed Circuit

For decades, car following and traffic flow models have assumed that drivers default driving strategy is to maintain a safe distance. Several previous studies have questioned whether the Driving to Keep Distance is a traffic invariant. Therefore, the acceleration deceleration torque asymmetry of drivers must necessarily determine the observed patterns of traffic oscillations. Those studies indicate that drivers can adopt alternative CF strategies, such as Driving to Keep Inertia, by following basic instructions. The present work extends the evidence from previous research by showing the effectiveness of a DI course that immediately translates into practice on a closed circuit. Twelve drivers were invited to follow a lead car that varied its speed on a real circuit. Then, the driver took a DI course and returned to the same real car following scenario. Drivers generally adopted DD as the default CF mode in the pretest, both in field and simulated PC conditions, yielding very similar results. After taking the full DI course, drivers showed significantly less acceleration, deceleration, and speed variability than did the pretest, both in the field and in the simulated conditions, which indicates that drivers adopted the DI strategy. This study is the first to show the potential of adopting a DI strategy in a real circuit.

cs.HC↗

arXiv2025

Safety Perspective on Assisted Lane Changes: Insights from Open-Road, Live-Traffic Experiments

This study investigates the assisted lane change functionality of five different vehicles equipped with advanced driver assistance systems (ADAS). The goal is to examine novel, under-researched features of commercially available ADAS technologies. The experimental campaign, conducted in the I-24 highway near Nashville, TN, US, collected data on the kinematics and safety margins of assisted lane changes in real-world conditions. The results show that the kinematics of assisted lane changes are consistent for each system, with four out of five vehicles using slower speeds and decelerations than human drivers. However, one system consistently performed more assertive lane changes, completing the maneuver in around 5 seconds. Regarding safety margins, only three vehicles are investigated. Those operated in the US are not restricted by relevant UN regulations, and their designs were found not to adhere to these regulatory requirements. A simulation method used to classify the challenge level for the vehicle receiving the lane change, showing that these systems can force trailing vehicles to decelerate to keep a safe gap. One assisted system was found to have performed a maneuver that posed a hard challenge level for the other vehicle, raising concerns about the safety of these systems in real-world operation. All three vehicles were found to carry out lane changes that induced decelerations to the vehicle in the target lane. Those decelerations could affect traffic flow, inducing traffic shockwaves.

physics.soc-ph↗

arXiv2025

Scenarios for the Deployment of Automated Vehicles in Europe

The deployment of Automated Vehicles (AVs) is expected to address road transport externalities (e.g., safety, traffic, environmental impact, etc.). For this reason, a legal framework for their large-scale market introduction and deployment is currently being developed in the European Union. Despite the first steps towards road transport automation, the timeline for full automation and its potential economic benefits remains uncertain. The aim of this paper is twofold. First, it presents a methodological framework to determine deployment pathways of the five different levels of automation in EU27+UK to 2050 under three scenarios (i.e., slow, medium baseline and fast) focusing on passenger vehicles. Second, it proposes an assessment of the economic impact of AVs through the calculation of the value-added. The method to define assumptions and uptake trajectories involves a comprehensive literature review, expert interviews, and a model to forecast the new registrations of different levels of automation. In this way, the interviews provided insights that complemented the literature and informed the design of assumptions and deployment trajectories. The added-value assessment shows additional economic activity due to the introduction of automated technologies in all uptake scenarios.

econ.GN↗

arXiv2022

Characterizing driver heterogeneity within stochastic traffic simulation

Drivers' heterogeneity and the broad range of vehicle characteristics on public roads are primarily responsible for the stochasticity observed in road traffic dynamics. Understanding the behavioural differences in drivers (human or automated systems) and reproducing observed behaviours in microsimulation attracts significant attention lately. Calibration of car-following model parameters is the prevalent way to simulate different driving behaviors through randomly injected variation around average parameter values. An issue is that, as shown in the literature, most car-following model do not realistically reproduce free-flow acceleration, that is in turn highly correlated with heterogeneity in driving styles. Furthermore, often, model parameters lose their physical interpretation upon calibration. The present study proposes a novel framework to analyse observed vehicle trajectories from various drivers, identify individual driver fingerprints based on their acceleration behavior, cluster drivers in categorically-meaningful driving styles (e.g. mild, normal and aggressive) and reproduce observed individual driver acceleration behaviors in microsimulation.

physics.soc-ph↗

arXiv2021

Physics-augmented models to simulate commercial adaptive cruise control (ACC) systems

This paper investigates the accuracy and robustness of car-following (CF) and adaptive cruise control (ACC) models used to simulate measured driving behaviour of commercial ACCs. To this aim, a general modelling framework is proposed, in which ACC and CF models have been incrementally augmented with physics extensions; namely, perception delay, linear or nonlinear vehicle dynamics, and acceleration constraints. The framework has been applied to the Intelligent Driver Model (IDM), the Gipps model, and to three basic ACCs. These are a linear controller coupled with a constant time-headway spacing policy and with two other policies derived from the traffic flow theory, which are the IDM desired-distance function and the Gipps equilibrium distance-speed function. The ninety models resulting from the combination of the five base models and the aforementioned physics extensions, have been assessed and compared through a vast calibration and validation experiment against measured trajectory data of low-level automated vehicles. When a single extension has been applied, perception delay and linear dynamics have been the extensions to mostly increase modelling accuracy, whatsoever the base model considered. Concerning models, Gipps-based ones have outperformed all other CF and ACC models in calibration. Even among ACCs, the linear controllers coupled with a Gipps spacing policy have been the best performing. On the other hand, IDM-based models have been by far the most robust in validation, showing almost no crash when calibrated parameters have been used to simulate different trajectories. Overall, the paper shows the importance of cross-fertilization between traffic flow and vehicle studies.

eess.SY↗

arXiv2021

Mobility and Economic Impact of COVID-19 Restrictions in Italy using Mobile Network Operator Data

This work presents the analysis of the impact of restrictions on mobility in Italy, with a focus on the period from 6 November 2020 to 31 January 2021, when a three-tier system based on different levels of risk was adopted and applied at regional level to contrast the second wave of COVID-19. The impact is first evaluated on mobility using Mobile Network Operator anonymised and aggregate data shared in the framework of a Business-to-Government initiative with the European Commission. Mobility data, alongside additional information about electricity consuption, are then used to assess the impacts on an economic level of the three-tier system in different areas of the country.

econ.GN↗

arXiv2020

openACC. An open database of car-following experiments to study the properties of commercial ACC systems

Commercial Adaptive Cruise Control (ACC) systems are increasingly available as standard options in modern vehicles. At the same time, still little information is openly available on how these systems actually operate and how different is their behavior, depending on the vehicle manufacturer or model.T o reduce this gap, the present paper summarizes the main features of the openACC, an open-access database of different car-following experiments involving a total of 16 vehicles, 11 of which equipped with state-of-the-art commercial ACC systems. As more test campaigns will be carried out by the authors, OpenACC will evolve accordingly. The activity is performed within the framework of the openData policy of the European Commission Joint Research Centre with the objective to engage the whole scientific community towards a better understanding of the properties of ACC vehicles in view of anticipating their possible impacts on traffic flow and prevent possible problems connected to their widespread. A first preliminary analysis on the properties of the 11 ACC systems is conducted in order to showcase the different research topics that can be studied within this open science initiative.

eess.SY↗

arXiv2019

The impact of automation and connectivity on traffic flow and CO2 emissions. A detailed microsimulation study

Many of the anticipated advantages of connected and automated vehicles or automated vehicles without connectivity (CAVs and AVs respectively) on congestion and energy consumption are questionable. Some studies provide quantitative answers to the above questions through microsimulation but they systematically ignore the realistic simulation of vehicle dynamics, driver behaviour or instantaneous emissions estimates, mostly due to the overall increased complexity of the transport systems and the need for low computational demand on large-scale simulations. However, recent studies question the capability of common car-following models to produce realistic vehicle dynamics or driving behaviour, which directly impacts emissions estimations as well. This work presents a microsimulation study that contributes on the topic, using a scenario-based approach to give insights regarding the impact of CAVs and AVs on the evolution of emissions over a highway network. The motivation here is to answer whether the different driving behaviours produce significant differences in emissions during rush hours, and how significant is the impact of detailed vehicle dynamics simulation and instantaneous emissions in the outcome.

physics.soc-ph↗