arXiv subjects

Benoit Bertrand

Publications and source records attributed to Benoit Bertrand.

At least 19 recordsLinked to original sources

arXiv2026

3D integration of a hybrid quantum dot circuit-QED device for fast gate dispersive charge readout and coherent spin-photon coupling

Hybrid circuit quantum electrodynamics (cQED) aims at coupling various quantum degrees of freedom, among which are spin and charge degrees of freedom in gate defined quantum dots, phonons or magnons... with quantized electromagnetic fields in superconducting microwave cavities to investigate fundamental physics questions or for quantum computation and simulation. However, low microwave losses, key for many hybrid cQED experiments, are challenging to achieve given the often exotic and/or complex material stacks (e.g. semiconducting material, ferromagnets, or piezoelectric materials) required to host the various quantum degrees of freedom. In this work, we present a 3D-integration process to overcome this challenge for semi-industrial silicon MOS spin qubits. The process is based on dense indium bump interconnects at a pitch of 10 $\mathrm{\mu}$m and superconducting thin films of Niobium Nitride (NbN). First, we report on DC and RF interconnect properties that demonstrate a high galvanic interconnection yield and internal quality factors above $10^{5}$ in the single photon regime for NbN resonators interrupted by a single indium bump interconnect. Eventually, we fabricated a 3D-integrated hybrid circuit quantum electrodynamics (cQED) device based on a semi-industrial MOS hole double quantum dot and a high impedance NbN resonator. For this device, we report a cavity internal quality factor above 10000 and demonstrate record sensitivity for gate-based dispersive readout of the charge degree of freedom with an SNR of 100 in 300 ns. Finally, we demonstrate strong spin-photon coupling of $g_{s}/2\pi$ = 75 MHz, which highlights the viability of 3D-integration for quantum dot based hybrid spin circuit quantum electrodynamics and opens to high-fidelity spin readout and microwave photon-based remote spin qubit entanglement.

cond-mat.mes-hall↗

arXiv2026

Multiplexed cryo-CMOS control of an isolated double quantum dot

Scalable spin-based quantum computing demands precise and stable control of a large number of gate-defined quantum dots while minimizing wiring complexity and thermal load. Control architectures based on sample-and-hold (SH) multiplexing techniques offer a promising solution by enabling sequential programming of several gate voltages using a limited number of input lines. However, the compatibility of such dynamic voltage refreshing with the stringent stability, noise, and speed requirements of quantum dot operation is an active subject of study. Here we experimentally demonstrate that a multiplexing cryo-CMOS circuit can reliably bias a silicon double quantum dot (DQD) at 0.5K. Exploiting the isolated regime, we show deterministic loading and isolation of four electrons and stable access to all five charge configurations from (4,0) to (0,4), despite the sequential voltage refreshing. We further demonstrate rapid voltage pulsing across an inter-dot transition, resolving single-electron tunneling events and stochastic switching at the (1,3)-(0,4) transition. These results confirm that SH-based multiplexed control is compatible with both static biasing and pulsing of isolated quantum dots, representing an important milestone toward scalable cryogenic control architectures for large-scale spin-qubit processors.

cond-mat.mes-hall↗

arXiv2025

A foundry-fabricated spin qubit unit cell with in-situ dispersive readout

Spin qubits based on semiconductor quantum dots are a promising prospect for quantum computation because of their high coherence times and gate fidelities. However, scaling up those structures to the numbers required by fault-tolerant quantum computing is currently hampered by a number of issues. One of the main issues is the need for single-shot low-footprint qubit readout. Here, we demonstrate the single-shot in situ measurement of a compact qubit unit-cell. The unit cell is composed of two electron spins with a controllable exchange interaction. We report initialization, single-shot readout and two-electron entangling gate. The unit cell was successfully operated at up to 1 K, with state-of-the-art charge noise levels extracted using free induction decay. With its integrated readout and high stability, this foundry fabricated qubit unit cell demonstrates strong potential for scalable quantum computing architectures.

cond-mat.mes-hall↗

arXiv2025

Coherence of a hole spin flopping-mode qubit in a circuit quantum electrodynamics environment

The entanglement of microwave photons and spin qubits in silicon represents a pivotal step forward for quantum information processing utilizing semiconductor quantum dots. Such hybrid spin circuit quantum electrodynamics (cQED) has been achieved by granting a substantial electric dipole moment to a spin by de-localizing it in a double quantum dot under spin-orbit interaction, thereby forming a flopping-mode (FM) spin qubit. Despite its promise, the coherence properties demonstrated to date remain insufficient to envision FM spin qubits as practical single qubits. Here, we present a FM hole spin qubit in a silicon nanowire coupled to a high-impedance niobium nitride microwave resonator for readout. We report Rabi frequencies exceeding 100 MHz and coherence times in the microsecond range, resulting in a high single gate quality factor of 380. This establishes FM spin qubits as fast and reliable qubits. Moreover, using the large frequency tunability of the FM qubit, we reveal for the first time that photonic effects predominantly limit coherence, with radiative decay being the main relaxation channel and photon shot-noise inducing dephasing. These results highlight that optimized microwave engineering can unlock the potential of FM spin qubits in hybrid cQED architectures, offering a scalable and robust platform for fast and coherent spin qubits with strong coupling to microwave photons.

cond-mat.mes-hall↗

arXiv2025

Transport characterization and quantum dot coupling in commercial 22FDX

Different groups worldwide have been working with the GlobalFoundries 22nm platform (22FDX) with the hopes of industrializing the fabrication of Si spin qubits. To guide this effort, we have performed a systematic study of six of the foundry's processes of reference (POR). Using effective mobility as a figure of merit, we study the impact of gate stack, channel type and back bias as a function of temperature. This screening process selected qubit devices that allowed us to couple quantum dots along both the length and width of the Si channel. We present stability diagrams with clear and regular honeycomb patterns, where spurious elements such as dopants are not observed. By combining these results with room and low temperature simulations, we provide insights into potential technology optimizations and show both the utility of qubit pre-screening protocols as well as the advantages of leveraging forward body bias within an FDSOI (Fully Depleted Silicon-On-Insulator) qubit platform.

cond-mat.mes-hall↗

arXiv2024

Optimal operation of hole spin qubits

Hole spins in silicon or germanium quantum dots have emerged as a compelling solid-state platform for scalable quantum processors. Besides relying on well-established manufacturing technologies, hole-spin qubits feature fast, electric-field-mediated control stemming from their intrinsically large spin-orbit coupling [1, 2]. This key feature is accompanied by an undesirable susceptibility to charge noise, which usually limits qubit coherence. Here, by varying the magnetic-field orientation, we experimentally establish the existence of ``sweetlines'' in the polar-azimuthal manifold where the qubit is insensitive to charge noise. In agreement with recent predictions [3], we find that the observed sweetlines host the points of maximal driving efficiency, where we achieve fast Rabi oscillations with quality factors as high as 1200. Furthermore, we demonstrate that moderate adjustments in gate voltages can significantly shift the sweetlines. This tunability allows multiple qubits to be simultaneously made insensitive to electrical noise, paving the way for scalable qubit architectures that fully leverage all-electrical spin control. The conclusions of this experimental study, performed on a silicon metal-oxide-semiconductor device, are expected to apply to other implementations of hole spin qubits.

cond-mat.mes-hall↗

arXiv2024

Parametric longitudinal coupling of a semiconductor charge qubit and a RF resonator

In this study, we provide a full experimental characterization of the parametric longitudinal coupling between a CMOS charge qubit and an off-chip RF resonator. Following Corrigan et al, Phys. Rev. Applied 20, 064005 (2023), we activate parametric longitudinal coupling by driving the charge qubit at the resonator frequency. Managing the crosstalk between the drive applied to the qubit and the resonator allows for the systematic study of the dependence of the longitudinal and dispersive charge-photon couplings on the qubit-resonator detuning and the applied drive. Our experimental estimations of the charge-photon couplings are perfectly reproduced by theoretical simple formulas, without relying on any fitting parameter. We go further by showing a parametric displacement of the resonator's steady state, conditional on the qubit state, and the insensitivity of the longitudinal coupling constant on the photon population of the resonator. Our results open to the exploration of the photon-mediated longitudinal readout and coupling of multiple and distant spins, with long coherent times, in hybrid CMOS cQED architectures.

cond-mat.mes-hall↗

arXiv2024

Combining multiplexed gate-based readout and isolated CMOS quantum dot arrays

Semiconductor quantum dot arrays are a promising platform to perform spin-based error-corrected quantum computation with large numbers of qubits. However, due to the diverging number of possible charge configurations combined with the limited sensitivity of large-footprint charge sensors, achieving single-spin occupancy in each dot in a growing quantum dot array is exceedingly complex. Therefore, to scale-up a spin-based architecture we must change how individual charges are readout and controlled. Here, we demonstrate single-spin occupancy of each dot in a foundry-fabricated array by combining two methods. 1/ Loading a finite number of electrons into the quantum dot array; simplifying electrostatic tuning by isolating the array from the reservoirs. 2/ Deploying multiplex gate-based reflectometry to dispersively probe charge tunneling and spin states without charge sensors or reservoirs. Our isolated arrays probed by embedded multiplex readout can be readily electrostatically tuned. They are thus a viable, scalable approach for spin-based quantum architectures.

cond-mat.mes-hall↗

arXiv2023

Real-time milli-Kelvin thermometry in a semiconductor qubit architecture

We report local time-resolved thermometry in a silicon nanowire quantum dot device designed to host a linear array of spin qubits. Using two alternative measurement schemes based on rf reflectometry, we are able to probe either local electron or phonon temperatures with $\mu$s-scale time resolution and a noise equivalent temperature of $3$ $\rm mK/\sqrt{\rm Hz}$. Following the application of short microwave pulses, causing local periodic heating, time-dependent thermometry can track the dynamics of thermal excitation and relaxation, revealing clearly different characteristic time scales. This work opens important prospects to investigate the out-of-equilibrium thermal properties of semiconductor quantum electronic devices operating at very low temperature. In particular, it may provide a powerful handle to understand heating effects recently observed in semiconductor spin-qubit systems.

cond-mat.mes-hall↗

arXiv2023

Broadband parametric amplification for multiplexed SiMOS quantum dot signals

Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in SiMOS transistor-like devices eases future industrial scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radiofrequency reflectometry only requires the already existing transistor gates to readout a quantum dot state, relieving the need for additional elements. In this effort towards scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in SiMOS multi-gate devices, with SNR enhanced thanks to a Josephson traveling-wave parametric amplifier (JTWPA). The broad, tunable 2GHz amplification bandwidth combined with more than 10dB ON/OFF SNR improvement of the JTWPA enables frequency and time division multiplexed readout of interdot transitions, and noise performance near the quantum limit. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performances up to a magnetic field of 1.2T at the quantum dot device, compatible with standard SiMOS spin qubit experiments.

cond-mat.mes-hall↗

arXiv2023

Electrical manipulation of a single electron spin in CMOS with micromagnet and spin-valley coupling

For semiconductor spin qubits, complementary-metal-oxide-semiconductor (CMOS) technology is the ideal candidate for reliable and scalable fabrication. Making the direct leap from academic fabrication to qubits fabricated fully by industrial CMOS standards is difficult without intermediate solutions. With a flexible back-end-of-line (BEOL) new functionalities such as micromagnets or superconducting circuits can be added in a post-CMOS process to study the physics of these devices or achieve proof of concepts. Once the process is established it can be incorporated in the foundry-compatible process flow. Here, we study a single electron spin qubit in a CMOS device with a micromagnet integrated in the flexible BEOL. We exploit the synthetic spin orbit coupling (SOC) to control the qubit via electric field and we investigate the spin-valley physics in the presence of SOC where we show an enhancement of the Rabi frequency at the spin-valley hotspot. Finally, we probe the high frequency noise in the system using dynamical decoupling pulse sequences and demonstrate that charge noise dominates the qubit decoherence in this range.

cond-mat.mes-hall↗

arXiv2022

Probing charge noise in few electron CMOS quantum dots

Charge noise is one of the main sources of environmental decoherence for spin qubits in silicon, presenting a major obstacle in the path towards highly scalable and reproducible qubit fabrication. Here we demonstrate in-depth characterization of the charge noise environment experienced by a quantum dot in a CMOS-fabricated silicon nanowire. We probe the charge noise for different quantum dot configurations, finding that it is possible to tune the charge noise over two orders of magnitude, ranging from 1 ueV^2 to 100 ueV^2. In particular, we show that the top interface and the reservoirs are the main sources of charge noise and their effect can be mitigated by controlling the quantum dot extension. Additionally, we demonstrate a novel method for the measurement of the charge noise experienced by a quantum dot in the few electron regime. We measure a comparatively higher charge noise value of 40 ueV^2 at the first electron, and demonstrate that the charge noise is highly dependent on the electron occupancy of the quantum dot.

cond-mat.mes-hall↗

arXiv2022

Parity and singlet-triplet high fidelity readout in a silicon double quantum dot at 0.5 K

We demonstrate singlet-triplet readout and parity readout allowing to distinguish T0 and the polarized triplet states. We achieve high fidelity spin readout with an average fidelity above $99.9\%$ for a readout time of $20~\mu$s and $99\%$ for $4~\mu$s at a temperature of $0.5~K$. We initialize a singlet state in a single dot with a fidelity higher than $99\%$ and separate the two electrons while keeping the same spin state with $a \approx 95.6\%$ fidelity.

cond-mat.mes-hall↗

arXiv2022

Strong coupling between a photon and a hole spin in silicon

Spins in semiconductor quantum dots constitute a promising platform for scalable quantum information processing. Coupling them strongly to the photonic modes of superconducting microwave resonators would enable fast non-demolition readout and long-range, on-chip connectivity, well beyond nearest-neighbor quantum interactions. Here we demonstrate strong coupling between a microwave photon in a superconducting resonator and a hole spin in a silicon-based double quantum dot issued from a foundry-compatible MOS fabrication process. By leveraging the strong spin-orbit interaction intrinsically present in the valence band of silicon, we achieve a spin-photon coupling rate as high as 330~MHz largely exceeding the combined spin-photon decoherence rate. This result, together with the recently demonstrated long coherence of hole spins in silicon, opens a new realistic pathway to the development of circuit quantum electrodynamics with spins in semiconductor quantum dots.

cond-mat.mes-hall↗

arXiv2021

Quantum Dot-Based Parametric Amplifiers

Josephson parametric amplifiers (JPAs) approaching quantum-limited noise performance have been instrumental in enabling high fidelity readout of superconducting qubits and, recently, semiconductor quantum dots (QDs). We propose that the quantum capacitance arising in electronic two-level systems (the dual of Josephson inductance) can provide an alternative dissipation-less non-linear element for parametric amplification. We experimentally demonstrate phase-sensitive parametric amplification using a QD-reservoir electron transition in a CMOS nanowire split-gate transistor embedded in a 1.8~GHz superconducting lumped-element microwave cavity, achieving parametric gains of -3 to +3 dB, limited by Sisyphus dissipation. Using a semi-classical model, we find an optimised design within current technological capabilities could achieve gains and bandwidths comparable to JPAs, while providing complementary specifications with respect to integration in semiconductor platforms or operation at higher magnetic fields.

cond-mat.mes-hall↗

arXiv2021

Non-reciprocal Pauli Spin Blockade in a Silicon Double Quantum Dot

Spin qubits in gate-defined silicon quantum dots are receiving increased attention thanks to their potential for large-scale quantum computing. Readout of such spin qubits is done most accurately and scalably via Pauli spin blockade (PSB), however various mechanisms may lift PSB and complicate readout. In this work, we present an experimental observation of a new, highly prevalent PSB-lifting mechanism in a silicon double quantum dot due to incoherent tunneling between different spin manifolds. Through dispersively-detected magnetospectroscopy of the double quantum dot in 16 charge configurations, we find the mechanism to be energy-level selective and non-reciprocal for neighbouring charge configurations. Additionally, using input-output theory we report a large coupling of different electron spin manifolds of 7.90 $\mu$eV, the largest reported to date, indicating an enhanced spin-orbit coupling which may enable all-electrical qubit control.

cond-mat.mes-hall↗

arXiv2021

Spin-valley coupling anisotropy and noise in CMOS quantum dots

One of the main advantages of silicon spin qubits over other solid-state qubits is their inherent scalability and compatibility with the 300 mm CMOS fabrication technology that is already widely used in the semiconductor industry, whilst maintaining high readout and gate fidelities. We demonstrate detection of a single electron spin using energy-selective readout in a CMOS-fabricated nanowire device with an integrated charge detector. We measure a valley splitting of 0.3 meV and 0.16 meV in two similar devices. The anisotropy of the spin-valley mixing is measured and shown to follow the dependence expected from the symmetry of the local confinement, indicating low disorder in the region of the quantum dot. Finally the charge noise in the spin-valley coupling regime is investigated and found to induce fluctuations in the qubit energy in the range of $0.6GHz/\sqrt{Hz}$.

cond-mat.mes-hall↗

arXiv2020

Dispersively probed microwave spectroscopy of a silicon hole double quantum dot

Owing to ever increasing gate fidelities and to a potential transferability to industrial CMOS technology, silicon spin qubits have become a compelling option in the strive for quantum computation. In a scalable architecture, each spin qubit will have to be finely tuned and its operating conditions accurately determined. In this prospect, spectroscopic tools compatible with a scalable device layout are of primary importance. Here we report a two-tone spectroscopy technique providing access to the spin-dependent energy-level spectrum of a hole double quantum dot defined in a split-gate silicon device. A first GHz-frequency tone drives electric-dipole spin resonance enabled by the valence-band spin-orbit coupling. A second lower-frequency tone (approximately 500 MHz) allows for dispersive readout via rf-gate reflectometry. We compare the measured dispersive response to the linear response calculated in an extended Jaynes-Cummings model and we obtain characteristic parameters such as g-factors and tunnel/spin-orbit couplings for both even and odd occupation.

cond-mat.mes-hall↗