arXiv subjects

Benjamin Walt

Publications and source records attributed to Benjamin Walt.

7 recordsLinked to original sources

arXiv2026

HyReach: Vision-Guided Hybrid Manipulator Reaching in Unseen Cluttered Environments

As robotic systems increasingly operate in unstructured, cluttered, and previously unseen environments, there is a growing need for manipulators that combine compliance, adaptability, and precise control. This work presents a real-time hybrid rigid-soft continuum manipulator system designed for robust open-world object reaching in such challenging environments. The system integrates vision-based perception and 3D scene reconstruction with shape-aware motion planning to generate safe trajectories. A learning-based controller drives the hybrid arm to arbitrary target poses, leveraging the flexibility of the soft segment while maintaining the precision of the rigid segment. The system operates without environment-specific retraining, enabling direct generalization to new scenes. Extensive real-world experiments demonstrate consistent reaching performance with errors below 2 cm across diverse cluttered setups, highlighting the potential of hybrid manipulators for adaptive and reliable operation in unstructured environments.

cs.RO↗

arXiv2025

Investigating Sensors and Methods in Grasp State Classification in Agricultural Manipulation

Effective and efficient agricultural manipulation and harvesting depend on accurately understanding the current state of the grasp. The agricultural environment presents unique challenges due to its complexity, clutter, and occlusion. Additionally, fruit is physically attached to the plant, requiring precise separation during harvesting. Selecting appropriate sensors and modeling techniques is critical for obtaining reliable feedback and correctly identifying grasp states. This work investigates a set of key sensors, namely inertial measurement units (IMUs), infrared (IR) reflectance, tension, tactile sensors, and RGB cameras, integrated into a compliant gripper to classify grasp states. We evaluate the individual contribution of each sensor and compare the performance of two widely used classification models: Random Forest and Long Short-Term Memory (LSTM) networks. Our results demonstrate that a Random Forest classifier, trained in a controlled lab environment and tested on real cherry tomato plants, achieved 100% accuracy in identifying slip, grasp failure, and successful picks, marking a substantial improvement over baseline performance. Furthermore, we identify a minimal viable sensor combination, namely IMU and tension sensors that effectively classifies grasp states. This classifier enables the planning of corrective actions based on real-time feedback, thereby enhancing the efficiency and reliability of fruit harvesting operations.

cs.RO↗

arXiv2025

Digital twins for the design, interactive control, and deployment of modular, fiber-reinforced soft continuum arms

Soft continuum arms (SCAs) promise versatile manipulation through mechanical compliance, for assistive devices, agriculture, search applications, or surgery. However, the strong nonlinear coupling between materials, morphology, and actuation renders design and control challenging, hindering real-world deployment. In this context, a modular fabrication strategy paired with reliable, interactive simulations would be highly beneficial, streamlining prototyping and control design. Here, we present a digital twin framework for modular SCAs realized using pneumatic Fiber-Reinforced Elastomeric Enclosures (FREEs). The approach models assemblies of FREE actuators through networks of Cosserat rods, favoring the accurate simulation of three-dimensional arm reconfigurations, while explicitly preserving internal modular architecture. This enables the quantitative analysis and scalable development of composite soft robot arms, overcoming limitations of current monolithic continuum models. To validate the framework, we introduce a three-dimensional reconstruction pipeline tailored to soft, slender, small-volume, and highly deformable structures, allowing reliable recovery of arm kinematics and strain distributions. Experimental results across multiple configurations and actuation regimes demonstrate close agreement with simulations. Finally, we embed the digital twins in a virtual environment to allow interactive control design and sim-to-real deployment, establishing a foundation for principled co-design and remote operation of modular soft continuum manipulators.

cs.RO↗

arXiv2025

Zero-shot Sim-to-Real Transfer for Reinforcement Learning-based Visual Servoing of Soft Continuum Arms

Soft continuum arms (SCAs) soft and deformable nature presents challenges in modeling and control due to their infinite degrees of freedom and non-linear behavior. This work introduces a reinforcement learning (RL)-based framework for visual servoing tasks on SCAs with zero-shot sim-to-real transfer capabilities, demonstrated on a single section pneumatic manipulator capable of bending and twisting. The framework decouples kinematics from mechanical properties using an RL kinematic controller for motion planning and a local controller for actuation refinement, leveraging minimal sensing with visual feedback. Trained entirely in simulation, the RL controller achieved a 99.8% success rate. When deployed on hardware, it achieved a 67% success rate in zero-shot sim-to-real transfer, demonstrating robustness and adaptability. This approach offers a scalable solution for SCAs in 3D visual servoing, with potential for further refinement and expanded applications.

cs.RO↗

arXiv2025

Precision Harvesting in Cluttered Environments: Integrating End Effector Design with Dual Camera Perception

Due to labor shortages in specialty crop industries, a need for robotic automation to increase agricultural efficiency and productivity has arisen. Previous manipulation systems perform well in harvesting in uncluttered and structured environments. High tunnel environments are more compact and cluttered in nature, requiring a rethinking of the large form factor systems and grippers. We propose a novel codesigned framework incorporating a global detection camera and a local eye-in-hand camera that demonstrates precise localization of small fruits via closed-loop visual feedback and reliable error handling. Field experiments in high tunnels show our system can reach an average of 85.0\% of cherry tomato fruit in 10.98s on average.

cs.RO↗

arXiv2024

A Neural Network-based Framework for Fast and Smooth Posture Reconstruction of a Soft Continuum Arm

A neural network-based framework is developed and experimentally demonstrated for the problem of estimating the shape of a soft continuum arm (SCA) from noisy measurements of the pose at a finite number of locations along the length of the arm. The neural network takes as input these measurements and produces as output a finite-dimensional approximation of the strain, which is further used to reconstruct the infinite-dimensional smooth posture. This problem is important for various soft robotic applications. It is challenging due to the flexible aspects that lead to the infinite-dimensional reconstruction problem for the continuous posture and strains. Because of this, past solutions to this problem are computationally intensive. The proposed fast smooth reconstruction method is shown to be five orders of magnitude faster while having comparable accuracy. The framework is evaluated on two testbeds: a simulated octopus muscular arm and a physical BR2 pneumatic soft manipulator.

cs.RO↗

arXiv2022

Visual Servoing for Pose Control of Soft Continuum Arm in a Structured Environment

For soft continuum arms, visual servoing is a popular control strategy that relies on visual feedback to close the control loop. However, robust visual servoing is challenging as it requires reliable feature extraction from the image, accurate control models and sensors to perceive the shape of the arm, both of which can be hard to implement in a soft robot. This letter circumvents these challenges by presenting a deep neural network-based method to perform smooth and robust 3D positioning tasks on a soft arm by visual servoing using a camera mounted at the distal end of the arm. A convolutional neural network is trained to predict the actuations required to achieve the desired pose in a structured environment. Integrated and modular approaches for estimating the actuations from the image are proposed and are experimentally compared. A proportional control law is implemented to reduce the error between the desired and current image as seen by the camera. The model together with the proportional feedback control makes the described approach robust to several variations such as new targets, lighting, loads, and diminution of the soft arm. Furthermore, the model lends itself to be transferred to a new environment with minimal effort.

cs.RO↗