arXiv subjects

Benjamin Mayer

Publications and source records attributed to Benjamin Mayer.

4 recordsLinked to original sources

arXiv2026

Identifying Contact Barrier Types in Few-Layer MoS2 Devices Using Correlative IV, LBIC, and Bias-Dependent KPFM

Electrical contacts between metals and two-dimensional (2D) semiconductors such as molybdenum disulfide (MoS2) critically govern device performance, yet their microscopic nature remains difficult to disentangle using any single characterization technique. Here we present an integrated experimental framework that combines current-voltage (IV) characterization, laser beam induced current (LBIC) mapping, and bias-dependent Kelvin probe force microscopy (KPFM) to comprehensively resolve the contact properties of few-layer MoS2-based two-terminal devices under ambient conditions. IV measurements deliver macroscopic transport characteristics as a function of bias voltage and illumination conditions. LBIC maps the local photocurrent response with micrometer spatial resolution, revealing the position and nature of internal electric fields at MoS2-metal interfaces. KPFM, operated under an applied static bias rather than in the conventional work-function mode, provides nanoscale-resolved potential distributions that quantify the relative magnitudes and spatial locations of contact barriers. We apply this framework to three representative devices - one exhibiting ohmic-like and two exhibiting diode-like contact behavior - and demonstrate that the combined analysis can unambiguously identify whether the dominant barrier is of Schottky or tunnel type and determine the asymmetry between the two contacts. We further demonstrate that thermal annealing significantly reduces the total resistance, while contact barriers remain the dominant source of resistance. The methodology is directly transferable to other 2D semiconductor-metal systems and provides a practical yet comprehensive route toward a quantitative microscopic understanding of 2D device contacts.

cond-mat.mtrl-sci↗

arXiv2025

Impact of Electrical Contacts on Transition Metal Dichalcogenides-Based Acoustoelectric and Acousto-Photoelectric Devices

We study the impact of electrical contact barriers in hybrid WSe$_2$-LiNbO$_3$-based acoustoelectric and acousto-photoelectric devices using a combination of scanning photocurrent and acousto-electric current spectroscopy. Static scanning photocurrent measurements provide a qualitative measure of the band-bending and spatial distribution of the Schottky barrier between semiconducting WSe$_2$ and gold electrodes whereas the surface acoustic wave-induced acousto-electric current reveals the height of the tunnelling barrier created by the van der Waals gap between the multilayered WSe$_2$ flake and the gold electrodes in addition to the Schottky barrier. The combination of both techniques shows a ten-fold increase in the photocurrent by the acoustic wave. Moreover, the observed spatial redistribution of the current is attributed to the interplay between the contact properties at the source and drain electrodes and the charge carrier dynamics induced by the surface acoustic wave. The ratio of acoustic wavelength to the electrical channel length is found to impact the SAW-induced charge carrier transport. For a channel length shorter than one acoustic wavelength, carriers undergo a seesaw-like motion which changes to charge conveyance for channel lengths comparable or exceeding the acoustic wavelength.

cond-mat.mes-hall↗

arXiv2019

Quantum dot optomechanics in suspended nanophononic strings

The optomechanical coupling of quantum dots and flexural mechanical modes is studied in suspended nanophononic strings. The investigated devices are designed and monolithically fabricated on an (Al)GaAs heterostructure. Radio frequency elastic waves with frequencies ranging between $f$=250 MHz to 400 MHz are generated as Rayleigh surface acoustic waves on the unpatterned substrate and injected as Lamb waves in the nanophononic string. Quantum dots inside the nanophononic string exhibit a 15-fold enhanced optomechanical modulation compared to those dynamically strained by the Rayleigh surface acoustic wave. Detailed finite element simulations of the phononic mode spectrum of the nanophononic string confirm, that the observed modulation arises from valence band deformation potential coupling via shear strain. The corresponding optomechanical coupling parameter is quantified to $0.15 \mathrm{meV nm^{-1}}$. This value exceeds that reported for vibrating nanorods by approximately one order of magnitude at 100 times higher frequencies. Using this value, a derive vertical displacements in the range of 10 nm is deduced from the experimentally observed modulation. The results represent an important step towards the creation of large scale optomechanical circuits interfacing single optically active quantum dots with optical and mechanical waves.

cond-mat.mes-hall↗

arXiv2017

Unsupervised temporal context learning using convolutional neural networks for laparoscopic workflow analysis

Computer-assisted surgery (CAS) aims to provide the surgeon with the right type of assistance at the right moment. Such assistance systems are especially relevant in laparoscopic surgery, where CAS can alleviate some of the drawbacks that surgeons incur. For many assistance functions, e.g. displaying the location of a tumor at the appropriate time or suggesting what instruments to prepare next, analyzing the surgical workflow is a prerequisite. Since laparoscopic interventions are performed via endoscope, the video signal is an obvious sensor modality to rely on for workflow analysis. Image-based workflow analysis tasks in laparoscopy, such as phase recognition, skill assessment, video indexing or automatic annotation, require a temporal distinction between video frames. Generally computer vision based methods that generalize from previously seen data are used. For training such methods, large amounts of annotated data are necessary. Annotating surgical data requires expert knowledge, therefore collecting a sufficient amount of data is difficult, time-consuming and not always feasible. In this paper, we address this problem by presenting an unsupervised method for training a convolutional neural network (CNN) to differentiate between laparoscopic video frames on a temporal basis. We extract video frames at regular intervals from 324 unlabeled laparoscopic interventions, resulting in a dataset of approximately 2.2 million images. From this dataset, we extract image pairs from the same video and train a CNN to determine their temporal order. To solve this problem, the CNN has to extract features that are relevant for comprehending laparoscopic workflow. Furthermore, we demonstrate that such a CNN can be adapted for surgical workflow segmentation. We performed image-based workflow segmentation on a publicly available dataset of 7 cholecystectomies and 9 colorectal interventions.

cs.CV↗