arXiv Science⌕ Search

arXiv subjects

Ben Fei

Publications and source records attributed to Ben Fei.

At least 19 recordsLinked to original sources
arXiv2026

SpecCoder: Specification-Aware Code Generation with Curriculum Dual-Task Reinforcement Learning

Large language models (LLMs) have made substantial progress in code generation but still struggle with challenging programming tasks that require understanding rich natural language requirements. These requirements often specify problem goals, input/output formats, constraints, examples, and edge cases. Overlooking even one may produce executable but functionally incorrect code. Existing training-free methods mainly rely on prompting or agent-based workflows, while training-based methods typically optimize final code outputs. However, existing approaches provide limited supervision for learning the intermediate mapping from raw requirements to structured specifications and for grounding them in concrete implementation behavior. Consequently, models may omit critical constraints, and even when an explicit specification is produced, the implementation may fail to reflect it consistently. Motivated by this gap, we propose SpecCoder, a specification-aware two-stage training framework for code generation. SpecCoder first employs specification-guided SFT to train LLMs to derive structured specification analyses and generate code conditioned on them. It then introduces curriculum dual-task GRPO, which jointly optimizes specification-guided generation and discrimination to encourage stronger correspondence between specifications and code behavior. Experiments on APPS, CodeContests, and xCodeEval demonstrate the effectiveness of specification-aware training, with SpecCoder consistently improving both standalone code generation and agent-based workflows. Additional evaluations on BigCodeBench-Hard and ClassEval, alongside human evaluation and perturbation studies, further validate the role of structured specifications in guiding code generation and discrimination.

cs.SE↗
arXiv2026

Diagnosing and narrowing the simulation-to-real gap in powder X-ray diffraction with a wet-dry agentic loop

Powder X-ray diffraction (PXRD) is the routine probe of crystalline matter, yet its analysis is the rate-limiting step as laboratories automate acquisition. Deep-learning analyzers excel on simulated patterns and degrade on measured ones. This simulation-to-real gap is structural, not additive: synthetic denoising gives no measurable lift on real spectra, whereas correcting a small peak-position drift more than doubles median retrieval correlation. Real-spectrum fine-tuning, peak-aligned reranking, and recalibration narrow what remains and restore the coverage synthetic anchors lose. Xtalyst integrates these in an agent-orchestrated system spanning phase identification, refinement, and calibrated property prediction. On a frozen held-out partition (n=534) each module measured on both splits reproduces its development finding -- including the synthetic-anchor under-coverage, whose magnitude differs between the two pools -- while held-out refinement converges and preserves symmetry without reaching profile-quality fits, and on a diffractometer its wet-dry recommend-rescan-reanalyze loop flips a blinded silicon standard to a gated PASS and changes which minor phase is resolved on a multi-metal alloy.

cond-mat.mtrl-sci↗
arXiv2026

ED-DiT: Physics-Guided Diffusion Pretraining for Transferable Molecular Representations from Electron Density

Pretraining has shown strong potential for learning transferable representations, yet it remains underexplored for electron-density-based molecular learning. Electron density provides a continuous three-dimensional description of molecular electronic structure, capturing both local spatial patterns and global physical quantities. This raises a key question: can electron-density fields be used for self-supervised pretraining to learn a shared representation that transfers across diverse electronic-structure-related tasks? We propose ED-DiT, a physics-guided Diffusion Transformer for self-supervised pretraining on electron-density point clouds. ED-DiT learns reusable representations by reconstructing corrupted and partially masked log-density fields across diffusion noise levels. An electron-number consistency constraint is further introduced to preserve the total electronic mass. The pretrained encoder can be adapted to property prediction, open-/closed-shell classification, molecule-electron-density retrieval, and molecule-conditioned electron-density prediction. Experiments on six EDBench tasks show that ED-DiT consistently outperforms the same architecture trained from scratch, especially under limited supervision. For molecule-conditioned electron-density prediction, it reduces RMSE from 2.2474 to 1.3753 and surpasses the available baseline. With only 10% labels, it improves orbital energy prediction RMSE from 0.0293 to 0.0138. These results demonstrate the effectiveness of physics-guided electron-density pretraining for learning transferable molecular representations.

cs.LG↗
arXiv2026

UniPolymer: A Unified Framework for Property Prediction, Structure Recommendation, and Evaluation in Polyimide Design

Designing polyimide structures with specific glass transition temperatures (Tg) is highly challenging. Existing methods primarily focus on target-conditioned generation, lacking an assessment of the consistency between the generated structure and the target properties. This leads to low-quality candidates deviating from the design objective entering subsequent processes, increasing invalid experiments and prolonging the development cycle. To address this issue, we propose UniPolymer, a unified framework for property prediction, target-conditioned generation, candidate evaluation, and structure recommendation in polyimide design and a dataset containing 10066 deduplicated polyimide repeating units with Tg tags (PITg-Curated) was constructed. To improve the consistency between generated candidate structures and the target Tg, UniPolymer first establishes a reliable structure-property relationship mapping through self-supervised chemical semantic learning, structural consistency enhancement, and multi-scale information fusion. Subsequently, the model employs a continuous-discrete joint Tg representation to guide the autoregressive generation of SELFIES. The generated candidate structures are further evaluated using a frozen property predictor and polyimide-specific structural constraints, and ranked according to their deviation from the target Tg, thereby preventing structures deviating from the target from entering the subsequent validation stage. Experimental results show that UniPolymer achieved a property prediction accuracy of R^2=0.93 and a candidate structure evaluation pass rate of 73.79%, which are 2% and 1.21% higher than the best baseline, respectively. Meanwhile, the predicted Tg values of the recommended candidates are in high agreement with the results of molecular dynamics simulations, thereby reducing the number of candidates that enter the high-cost experimental stage.

cs.LG↗
arXiv2026

AutoSupervision: Closing the Feedback Loop in Scientific Workflows with Grounded Revision Verification

Recent advances in large language models (LLMs) have enabled AI systems to assist scientific research and peer review. However, an essential capability for reliable AI-assisted scientific workflows remains underexplored: verifying whether reviewer feedback leads to meaningful and evidence-supported manuscript improvements. We introduce AutoSupervision, which evaluates whether scientific manuscript revisions genuinely address reviewer concerns through grounded evidence. AutoSupervision leverages transparent peer-review records as a natural source of supervision, where reviewer comments specify scientific concerns, author responses describe claimed resolutions, and revised manuscripts provide evidence of changes. Given reviewer comments, author responses, and revised manuscripts, models must characterize reviewer concerns, determine whether concerns have been addressed, and identify supporting manuscript evidence. We construct AutoSupervision from 56,000 Nature Communications articles and corresponding review records. Then we conducted experiments on LLMs, the ablation study, and the case study. Our results show that while LLMs perform well in characterizing reviewer concerns, with GPT-5.5 achieving a score of 0.754, evidence-based verification remains the primary bottleneck, with the best-performing model reaching only 0.501.

cs.CL↗
arXiv2026

The Geometry of Flow-Matching Uncertainty: A Cost-free Uncertainty Proxy and Its Application in Flow-based VLA Failure Detection

Flow matching (FM) has become a popular action head paradigm for modern embodied models. However, as a conditional generative model, it does not explicitly expose its inherent uncertainty, producing faulty action chunks even when it misinterprets the scene or encounters out-of-distribution (OOD) inputs. Therefore, determining when an FM-generated action can be trusted is essential for safe deployment, yet existing uncertainty estimation methods on real-time control suffer from several issues: extra training budget, high computational overhead, and low generalization ability. In this work, we provide a geometric interpretation of FM uncertainty in the velocity field, showing that uncertainty manifests as deviation from an ideal affine-isotropic contraction field. Building on this observation, we introduce denoising acceleration ($\mathrm{accel}$), a highly-generalizable and cost-free uncertainty proxy that measures the bending of the denoising trajectory from a single forward pass, without additional model evaluations, training, or resampling. We theoretically and empirically demonstrate that $\mathrm{accel}$ is a faithful proxy for FM uncertainty and further test its utility in online failure detection. Results show that $\mathrm{accel}$ identifies failing rollouts well before termination, matching or even outperforming costly resampling- and training-based baselines across settings under realistic deployment budget. Code and demos available at: https://github.com/rrrrrrzy/fm-geometry.

cs.AI↗
arXiv2026

TSSM: Triaxial State Space Model for Global Station Weather Forecasting with Temporal-Variable-Historical Modeling

Global Station Weather Forecasting (GSWF) is pivotal for localized and extreme weather prediction over key regions. Despite efforts to exploit look-back windows, existing methods show limited accuracy gains and struggle with extreme events and error accumulation. These limitations stem from overreliance on short-term patterns, which are insufficient to capture chaotic weather dynamics, especially under partial observations. To address this problem, we propose a novel Triaxial State Space Model (TSSM) with a history-enhanced Temporal-VariableHistorical paradigm, which incorporates period-aligned historical weather data to compensate for long-term, large-scale periodic, and full-window weather patterns beyond the temporal lookback window. Specifically, TSSM stacks historical samples into period-aligned batches, where forecasting is causally supported by historical and current observations. Temporal, variable, and historical scanning are designed to capture axial temporal dependencies, variable correlations, and historical evolution. This structure is hierarchically shared to model seasonal to extreme events while alleviating misalignment across historical patterns. TSSM achieves SOTA performance on Weather-5K, the largest station weather dataset to date, with 10% and 61% gains in accuracy and extreme event metrics, and obtains 95% best or second-best results on human-involved datasets. Its advantages are more pronounced in long-horizon and iterative forecasting, reaching a 37.5% gain at 240h and up to 103.5% under a 48h times 5 iterative setting. Moreover, TSSM retains > 90% performance under up to 80% missing observations, compared with < 43% for baselines, demonstrating robustness and practical potential for reliable GSWF in global in-situ observation networks.

cs.LG↗
arXiv2026

Accurate, Interdisciplinary and Transparent Structure-property Understanding with Deep Native Structural Reasoning

Structure-property relationships are foundational to biology, chemistry and materials science, where function, reactivity and physical response emerge from spatial, chemical and periodic organization. Mechanistically explaining these relationships requires interpreting structural evidence through scientific principles and physical constraints, from stereochemistry and bonding to symmetry, energetics and periodic order. However, applying artificial intelligence to this process presents a joint challenge of representation and reasoning: models must preserve domain-native structural information while showing how specific evidence supports predictions under these constraints. Here we introduce SciReasoner, a multimodal scientific foundation model for native structural reasoning across proteins, small molecules and inorganic crystals. SciReasoner discretizes coordinates, topologies and periodic connectivities into a unified structure-aware vocabulary, treating structural tokens as addressable evidence units during reasoning. In homology-controlled Gene Ontology prediction, SciReasoner improves Cellular Component annotation for low-homology and orphan-like proteins, increasing $F_{\max}$ from 0.42 to 0.55. In chemistry, it raises single-step retrosynthesis accuracy from 0.63 to 0.72 while generating fragment-level disconnection and precursor-verification traces. In materials science, its representations separate elemental and compound phases and resolve high- and low-band-gap regimes. Across 86 benchmarks, SciReasoner achieves state-of-the-art performance on 67 tasks. Double-blind expert evaluation rates its reasoning traces as preferred or at least comparable to those of a frontier large language model in 98% of cases. By making structure an inspectable substrate for reasoning under scientific constraints, SciReasoner connects accurate prediction with interpretable scientific inference.

cs.CL↗
arXiv2026

Obshazard-bench: Benchmarking Multimodal Foundation Models for Real-Time Disaster Intelligence from Raw Earth Observation Streams

Multimodal Large Language Models (MLLMs) are increasingly used to interpret Earth observation data, yet their capability to support real-world disaster emergency response remains insufficiently evaluated. Existing remote sensing benchmarks largely rely on static, post-hoc, and expert-processed products, such as gridded reanalysis data, which are difficult to align with operational disaster scenarios where hazards evolve rapidly and decisions must be made under strict time constraints. To bridge this gap, we introduce Obshazard-bench, a real-time, observation-driven benchmark for evaluating disaster intelligence in MLLMs. Unlike image-centric or post-event benchmarks, Obshazard-bench directly integrates raw, high-frequency satellite sounding streams from diverse satellite sensors with concurrent ground-station observations, historical disaster records, and socio-economic indicators, bypassing delayed expert-processing and physical-inversion pipelines. The benchmark covers 8 major disaster categories and 28 sub-categories across more than 60 countries, incorporating over 120 historically documented extreme-event cases and thousands of lifecycle-oriented VQA samples. Moreover, Obshazard-bench further defines a three-stage evaluation taxonomy aligned with the operational disaster workflow: Predictive Crisis Anticipation for pre-disaster risk detection and early forecasting, Active Evolution Reasoning for in-situ disaster tracking and termination prediction, and Multi-faceted Impact Quantification for post-disaster magnitude deduction, humanitarian burden estimation, and socio-economic impact assessment. Experiments on representative general-purpose and Earth-focused foundation models reveal substantial limitations in transforming raw multi-channel physical observations into temporally grounded and decision-relevant disaster reasoning.

cs.CL↗
arXiv2026

LabOSBench: Benchmarking Computer Use Agents for Scientific Instrument Control

Current computer-use benchmarks primarily focus on software operation tasks in virtualized systems, whereas scientific instrumentation scenarios require coordinated control over complex interfaces, and feedback-driven parameter adjustment. However, directly evaluating agents on physical high-precision instruments is impractical due to high cost, safety risks, limited accessibility, and difficulty in ensuring reproducible evaluation. This motivates the need for a simulated yet realistic testbed that preserves the operational challenges of scientific instruments while enabling scalable and safe benchmarking. To this end, we introduce LabOSBench, a challenging benchmark for multimodal GUI agents built on a suite of web-based scientific-instrument simulators. Operating directly via a browser, LabOSBench avoids resource-heavy OS virtualization while supporting flexible task configuration and execution-based evaluation. Specifically, LabOSBench constructs 96 subtasks across eight instrument simulators, covering workflows from sample loading, alignment, parameter tuning, and data acquisition to result inspection. We evaluate general-purpose vision-language models, specialized GUI agent models, and advanced agentic frameworks at both subtask and end-to-end levels. Our experiments reveal that while existing agents can complete many structured GUI subtasks, they still struggle with feedback-driven operations and long-horizon workflow execution. Overall, LabOSBench provides a reproducible, low-cost testbed for advancing computer-using agents toward scientific-instrument control.

cs.AI↗
arXiv2026

Denoising-GS: Gaussian Splatting with Spatial-aware Denoising

Recent advances in 3D Gaussian Splatting (3DGS) have achieved remarkable success in high-fidelity Novel View Synthesis (NVS), yet the optimization process inevitably introduces noisy Gaussian primitives due to the sparse and incomplete initialization from Structure-from-Motion (SfM) point clouds. Most existing methods focus solely on adjusting the positions of primitives during optimization, while neglecting the underlying spatial structure. To this end, we introduce a new perspective by formulating the optimization of 3DGS as a primitive denoising process and propose Denoising-GS, a spatial-aware denoising framework for Gaussian primitives by taking both the positions and spatial structure into consideration. Specifically, we design an optimizer that preserves the spatial optimization flow of primitives, facilitating coherent and directed denoising rather than random perturbations. Building upon this, the Spatial Gradient-based Denoising strategy jointly considers the spatial supports of primitives to ensure gradient-consistent updates. Furthermore, the Uncertainty-based Denoising module estimates primitive-wise uncertainty to prune redundant or noisy primitives, while the Spatial Coherence Refinement strategy selectively splits primitives in sparse regions to maintain structural completeness. Experiments conducted on three benchmark datasets demonstrate that Denoising-GS consistently enhances NVS fidelity while maintaining representation compactness, achieving state-of-the-art performance across all benchmarks. Source code and models will be made publicly available.

cs.CV↗
arXiv2026

OmniLiDAR: A Unified Diffusion Framework for Multi-Domain 3D LiDAR Generation

LiDAR scene generation is increasingly important for scalable simulation and synthetic data creation, especially under diverse sensing conditions that are costly to capture at scale. Typically, diffusion-based LiDAR generators are developed under single-domain settings, requiring separate models for different datasets or sensing conditions and hindering unified, controllable synthesis under heterogeneous distribution shifts. To this end, we present OmniLiDAR, a unified text-conditioned diffusion framework that generates LiDAR scans in a shared range-image representation across eight representative domains spanning three shift types: adverse weather, sensor-configuration changes (e.g., reduced beams), and cross-platform acquisition (vehicle, drone, and quadruped). To enable training a single model over heterogeneous domains without isolating optimization by domain, we introduce a Cross-Domain Training Strategy (CDTS) that mixes domains within each mini-batch and leverages conditioning to steer generation. We further propose Cross-Domain Feature Modeling (CDFM), which captures directional dependencies along azimuth and elevation axes to reflect the anisotropic scanning structure of range images, and Domain-Adaptive Feature Scaling (DAFS) as a lightweight modulation to account for structured domain-dependent feature shifts during denoising. In the absence of a public consolidated benchmark, we construct an 8-domain dataset by combining real-world scans with physically based weather simulation and systematic beam reduction while following official splits. Extensive experiments demonstrate strong generation fidelity and consistent gains in downstream use cases, including generative data augmentation for LiDAR semantic segmentation and 3D object detection, as well as robustness evaluation under corruptions, with consistent benefits in limited-label regimes.

cs.CV↗
arXiv2026

Earth Science Foundation Models: From Perception to Reasoning and Discovery

Large foundation models (FMs) are transforming Earth science by integrating heterogeneous multimodal data, such as multi-platform imagery, gridded reanalysis data, diverse geophysical and geochemical observations, and domain-specific text, to support tasks ranging from basic perception to advanced scientific discovery. This paper provides a unified review of Earth science foundation models (Earth FMs) through two complementary dimensions: depth, which traces the evolution of model capabilities from perception to multimodal reasoning and agentic scientific workflows, and breadth, which summarizes their expanding applications across the atmosphere, hydrosphere, lithosphere, biosphere, anthroposphere, and cryosphere, as well as coupled Earth system processes. Using this framework, we review representative multimodal Earth foundation models and compile more than 200 datasets and benchmarks spanning diverse Earth science tasks and modalities. We further discuss key challenges in multimodal data heterogeneity, scientific reliability and continual updating, scalability and sustainability, and the transition from foundation models to agentic and embodied Earth intelligence, and outline future directions toward more integrated, trustworthy, and actionable AI Earth scientists. Overall, this paper offers a structured roadmap for understanding the development of Earth foundation models from both capability depth and application breadth.

astro-ph.IM↗
arXiv2026

Earth-o1: A Grid-free Observation-native Atmospheric World Model

Despite the unprecedented volume of multimodal data provided by modern Earth observation systems, our ability to model atmospheric dynamics remains constrained. Traditional modeling frameworks force heterogeneous measurements into predefined spatial grids, inherently limiting the full exploitation of raw sensor data and creating severe computational bottlenecks. Here we present Earth-o1, an observation-native atmospheric world model that overcomes these structural limitations. Rather than relying on conventional atmospheric dynamical modeling systems or traditional data assimilation, Earth-o1 directly learns the continuous, three-dimensional physical evolution of the Earth system from ungridded observational data. By integrating diverse sensor inputs into a unified, grid-free dynamical field, the model autonomously advances the atmospheric state in space and time. We show that this fundamentally distinct paradigm enables direct, real-time forecasting and cross-sensor inference without the overhead of explicit numerical solvers. In hindcast evaluations, Earth-o1 achieves surface forecast skill comparable to the operational Integrated Forecasting System (IFS). These results establish that continuous, observation-driven world models -- a new class of fully observation-native geophysical simulators -- can match the fidelity of established physical frameworks, providing a scalable data-driven foundation for a digital twin of the Earth.

cs.CV↗
arXiv2026

Owl-AuraID 1.0: An Intelligent System for Autonomous Scientific Instrumentation and Scientific Data Analysis

Scientific discovery increasingly depends on high-throughput characterization, yet automation is hindered by proprietary GUIs and the limited generalizability of existing API-based systems. We present Owl-AuraID, a software-hardware collaborative embodied agent system that adopts a GUI-native paradigm to operate instruments through the same interfaces as human experts. Its skill-centric framework integrates Type-1 (GUI operation) and Type-2 (data analysis) skills into end-to-end workflows, connecting physical sample handling with scientific interpretation. Owl-AuraID demonstrates broad coverage across ten categories of precision instruments and diverse workflows, including multimodal spectral analysis, microscopic imaging, and crystallographic analysis, supporting modalities such as FTIR, NMR, AFM, and TGA. Overall, Owl-AuraID provides a practical, extensible foundation for autonomous laboratories and illustrates a path toward evolving laboratory intelligence through reusable operational and analytical skills. The code are available at https://github.com/OpenOwlab/AuraID.

cs.AI↗
arXiv2026

OpenEarth-Agent: From Tool Calling to Tool Creation for Open-Environment Earth Observation

Earth Observation (EO) is essential for perceiving dynamic land surface changes, yet deploying autonomous EO in open environments is hindered by the immense diversity of multi-source data and heterogeneous tasks. While remote sensing agents have emerged to streamline EO workflows, existing tool-calling agents are confined to closed environments. They rely on pre-defined tools and are restricted to narrow scope, limiting their generalization to the diverse data and tasks. To overcome these limitations, we introduce OpenEarth-Agent, the first tool-creation agent framework tailored for open-environment EO. Rather than calling predefined tools, OpenEarth-Agent employs adaptive workflow planning and tool creation to generalize to unseen data and tasks. This adaptability is bolstered by an open-ended integration of multi-stage tools and cross-domain knowledge bases, enabling robust execution in the entire EO pipeline across multiple application domains. To comprehensively evaluate EO agents in open environments, we propose OpenEarth-Bench, a novel benchmark comprising 596 real-world, full-pipeline cases across seven application domains, explicitly designed to assess agents' adaptive planning and tool creation capabilities. Only essential pre-trained model tools are provided in this benchmark, devoid of any other predefined task-specific tools. Extensive experiments demonstrate that OpenEarth-Agent successfully masters full-pipeline EO across multiple domains in the open environment. Notably, on the cross-benchmark Earth-Bench, our tool-creating agent equipped with 6 essential pre-trained models achieves performance comparable to tool-calling agents relying on 104 specialized tools, and significantly outperforms them when provided with the complete toolset. In several cases, the created tools exhibit superior robustness to data anomalies compared to human-engineered counterparts.

cs.CV↗
arXiv2026

TRACE: A Multi-Agent System for Autonomous Physical Reasoning for Seismology

Inferring physical mechanisms that govern earthquake sequences from geophysical observations remains a challenging task, particularly across tectonically distinct environments where similar seismic patterns can reflect different underlying processes. Current seismological processing and interpretation rely heavily on experts' choice of parameters and the synthesis of various seismological products, limiting reproducibility and the formation of generalizable knowledge across settings. Here we present TRACE (Trans-perspective Reasoning and Automated Comprehensive Evaluator), a multi-agent system that combines large language model planning with formal seismological constraints to derive auditable, physically grounded mechanistic inferences from raw observations. Applied to the 2019 Ridgecrest sequence, TRACE autonomously identifies stress-perturbation-induced delayed triggering, resolving the cascading interaction between the Mw 6.4 and Mw 7.1 mainshocks. For the 2025 Santorini-Kolumbo volcanic eruption, the system identifies a structurally guided intrusion model, distinguishing episodic migration via fault channels from the continuous propagation expected in homogeneous crustal failure. By providing a generalizable infrastructure for deriving physical insights from seismic phenomena, TRACE advances the field from expert-dependent analysis toward knowledge-guided autonomous discovery in Earth sciences.

physics.geo-ph↗
arXiv2026

Accurate and Efficient Hybrid-Ensemble Atmospheric Data Assimilation in Latent Space with Uncertainty Quantification

Data assimilation (DA) combines model forecasts and observations to estimate the optimal state of the atmosphere with its uncertainty, providing initial conditions for weather prediction and reanalyses for climate research. Yet, existing traditional and machine-learning DA methods struggle to achieve accuracy, efficiency and uncertainty quantification simultaneously. Here, we propose HLOBA (Hybrid-Ensemble Latent Observation-Background Assimilation), a three-dimensional hybrid-ensemble DA method that operates in an atmospheric latent space learned via an autoencoder (AE). HLOBA maps both model forecasts and observations into a shared latent space via the AE encoder and an end-to-end Observation-to-Latent-space mapping network (O2Lnet), respectively, and fuses them through a Bayesian update with weights inferred from time-lagged ensemble forecasts. Both idealized and real-observation experiments demonstrate that HLOBA matches dynamically constrained four-dimensional DA methods in both analysis and forecast skill, while achieving end-to-end inference-level efficiency and theoretical flexibility applies to any forecasting model. Moreover, by exploiting the error decorrelation property of latent variables, HLOBA enables element-wise uncertainty estimates for its latent analysis and propagates them to model space via the decoder. Idealized experiments show that this uncertainty highlights large-error regions and captures their seasonal variability.

cs.LG↗