arXiv subjects

Bahram Djafari-Rouhani

Publications and source records attributed to Bahram Djafari-Rouhani.

At least 19 recordsLinked to original sources

arXiv2026

Implementation of Reservoir Computing Using Coupled Microelectromechanical Drum Resonators via Sideband-Pumped Phonon-Cavity Dynamics

Reservoir computing is a bio-inspired machine learning paradigm that exploits the intrinsic dynamics of nonlinear systems with fading memory for efficient temporal information processing. Microelectromechanical resonators offer a promising platform for reservoir computing as they inherently possess the requisite nonlinear and temporal properties while also facilitating the integration of sensing and computing within a single platform. In this work, we experimentally demonstrate a physical reservoir computing platform based on two capacitively coupled drum resonators, operating in the MHz frequency regime. Taking advantage of the concept of phonon-cavity electromechanics, a pump tone is applied at the sideband of the phonon cavity while probing one of the coupled modes, analogous to optomechanical systems, thereby creating nonlinear dynamics in energy transfer between the two resonators. Physical reservoir computing is implemented by exploiting the nonlinear response induced through pump amplitude modulation in combination with a time-delay feedback loop, and the performance is evaluated using both parity and Normalized Auto-Regressive Moving Average benchmarks. This work demonstrates a compact microelectromechanical platform for the integration of sensing and reservoir computing. Moreover, the sideband pumping scheme can further extend conventional single resonator reservoir computing to a multimode architecture.

physics.app-ph↗

arXiv2025

Material-Specific Mapping of Plasmonic Modal Dispersion via Discrete Momentum-Space Probes

Accurate measurement of surface plasmon polariton (SPP) dispersion remains challenging, as conventional angle-resolved techniques are limited by surface quality, diffraction artifacts, and geometry-induced band folding. Here, we show that SPP dispersion can be reconstructed from transmission spectra of plasmonic gratings with subwavelength apertures acting as Fabry-P\'erot (FP) cavities. The approach harnesses modal hybridization between localized FP modes and SPPs, resolved using non-Hermitian eigenmode decomposition and validated by finite-difference time-domain simulations. {\omega}-k dispersion mapping is achieved by varying the grating periodicity, with each structure probing a distinct in-plane momentum state. Geometry- and material-dependent corrections for aperture-induced leakage and dispersive phase shifts yield reconstructed relations in close agreement with eigenmode calculations across non-dispersive, Drude, and Drude-Lorentz models as well as experimental optical datasets spanning metals, oxides, and nitrides. The method is material-agnostic and requires no momentum-resolved instrumentation. Sensitivity to fabrication-induced wall roughness is also assessed: FP resonance positions remain spectrally stable with no measurable linewidth broadening across the explored perturbation range, and the modal field topology is largely preserved throughout. However, transmitted amplitude decreases monotonically owing to enhanced ohmic absorption at the perturbed boundaries.

physics.optics↗

arXiv2023

Observation of Two-Dimensional Acoustic Bound States in the Continuum

The design of devices based on acoustic or optical fields requires the fabrication of cavities and structures capable of efficiently trapping these waves. A special type of cavity can be designed to support resonances with a theoretically infinite quality factor, named bound states in the continuum or BICs. The experimental measurement of such modes is still a challenging problem, as they are, by definition, not accessible from external perturbations. Therefore, current reported works rely on indirect measurements that are based on the traces left by these modes on external properties of one-dimensional systems. Here we report on the theoretical design and experimental realization of a two-dimensional, fully open acoustic resonator supporting BICs. This BIC, whose symmetry is chosen during design by properly tailoring the geometrical properties of the system, is completely accessible and allows for the direct measurement of the whole pressure field and properties. We experimentally demonstrate its existence with high quality factor and field enhancement properties.

physics.class-ph↗

arXiv2022

Bound states in the continuum in circular clusters of scatterers

In this work, we study the localization of flexural waves in highly symmetric clusters of scatterers. It is shown that when the scatterers are placed regularly in the perimeter of a circumference the quality factor of the resonances strongly increases with the number of scatterers in the cluster. It is also found that in the continuous limit, that is to say, when the number of scatterers tends to infinite, the quality factor is infinite so that the modes belong to the class of the so called bound states in the continuum or BICs, and an analytical expression for the resonant frequency is found. These modes have different multipolar symmetries, and we show that for high multipolar orders the modes tend to localize at the border of the circumference, forming therefore a whishpering gallery mode with an extraordinarily high quality factor. Numerical experiments are performed to check the robustness of these modes under different types of disorder and also to study their excitation from the far field. Although we have focused our study to flexural waves, the methodology presented in this work can be applied to other classical waves, like electromagnetic or acoustic waves, being therefore a promissing approach for the design of high quality resonators based on finite clusters of scatterers.

physics.class-ph↗

arXiv2019

Generalized Elastodynamic Model for Nanophotonics

A self-consistent theory for the classical description of the interaction of light and matter at the nano-scale is presented, which takes into account spatial dispersion. Up to now, the Maxwell equations in nanostructured materials with spatial dispersion have been solved by the introduction of the so-called Additional Boundary Conditions. In this paper, we derive an approach where non-local effects are studied in a precise and uniquely defined way, thus allowing the treatment of all solid-solid interfaces (metals, semiconductors or insulators), as well as solid-vacuum interfaces in the same framework. The theory is based on the derivation of a potential energy for an ensemble of electrons in a given potential, where the deformation of the ensemble is treated as in a solid, including both shear and compressional deformations, instead of a fluid described only by a bulk compressibility like in the hydrodynamical approach. The derived classical equation of motion for the ensemble describes the deformation vector and the corresponding polarization vector as an elastodynamic field, including viscous forces, from which a generalized non-local constitutive equation for the dielectric constant is derived. Boundary conditions are identical to that of elastodynamics and they emerge in a natural way, without any physical hypothesis outside the current description, as it is commonly required in other non-local approaches. This description does not require the discontinuity of any component of the electric, magnetic or polarization fields and, consequently, no bounded currents or charges are present at the interface, which is a more suitable description from the microscopic point of view. It is shown that the method converges to the local boundary conditions in the low spatial dispersion limit for insulators and conductors, quantified by means of a parameter defined as the "characteristic length".

physics.optics↗

arXiv2019

Polarization-dependent and Valley-protected Lamb Waves in Asymmetric Pillared Phononic Crystals

We present the realization of the topological valley-protected zero-order antisymmetric (A0) or symmetric (S0) and zero-order shear-horizontal (SH0) Lamb waves at different domain walls based on topologically distinct asymmetric double-sided pillared phononic crystals. The elastic periodic structures have either the triangular or the honeycomb symmetry and give rise to a double-negative branch in the dispersion curves. By artificially folding the doubly negative branch, a degenerate Dirac cone is achieved. Different polarization-dependent propagation along the same primary direction along the constituent branches are presented. Moreover, divergent polarization-dependent phenomena along different primary directions along a given branch are also reported. By imposing two large space-inversion symmetry (SIS) breaking perturbations the topological phase transition is obtained. We show that the Berry curvature becomes strongly anisotropic when the wave vector gets away from the valleys. Further, we demonstrate the unidirectional transport of A0, S0, and SH0 Lamb waves at different domain walls in straight or Z-shape wave guides. In the large SIS breaking case, we show negligible reflection at the zigzag outlet of the straight wave guide and occurrence of weak inter-valley scattering at the bending corners of the Z-shape wave guide. For a larger strength of SIS breaking, the edge states are gapped and strong reflection at the zigzag outlet and bending corners is observed. The topological protection cannot be guaranteed any more in that case.

physics.app-ph↗

arXiv2019

Valley and pseudospin-valley topologically protected edge states in symmetric pillared phononic crystals

We present a symmetric double-sided pillared phononic crystals (PPnCs) that can emulate both quantum spin Hall effect (QSHE) and quantum valley Hall effect (QVHE) by solely imposing different geometric perturbations. Indeed, the Dirac cones can occur in the low (deep subwavelength) and high frequency regime by judiciously turning the parameters of the attached pillars and even a double Dirac cone can be achieved. We realize the valley-protected, the pseudospin-protected or the pseudospin-valley coupled edge states with the proposed platform. Besides, we show a variety of refraction phenomena (positive, negative and evanescent) of the valley-polarized edge state at the zigzag termination when emulating QVHE. Further, we illustrate the valley-dependent feature of the pseudospin-valley coupled edge state and demonstrate the valley based splitting of the pseudospin-protected edge states in a Y-junction wave guide.

physics.app-ph↗

arXiv2019

Autler-Townes splitting and acoustically induced transparency based on Love waves interacting with pillared meta-surface

Autler-Townes Splitting (ATS) and Electromagnetically Induced Transparency (EIT) are similar phenomena but distinct in nature. They have been widely discussed and distinguished by employing the Akaike information criterion (AIC). However, such work is lacking in acoustic system. In this work, the interaction of Love waves with two-line pillared meta-surface is numerically investigated by Finite Element Method. Acoustic analogue of ATS, Fabry-Perot resonance and cavity modes are first demonstrated in two lines of identical pillars by varying the distance between the pillar lines. By detuning the radius of one line of pillars, Fabry-Perot resonance along with two different pillar resonances give rise to the acoustic analogue of EIT (AIT) when the distance between the pillar lines is a multiple of half wavelength. ATS and AIT formula models are used to fit the transmission spectra, showing good agreements with numerical results. The quality of the fit models is quantitatively evaluated by resorting to the AIC. We show that theoretical and analytical discrimination between ATS and AIT are methodologically complementary. These results should have important consequences for potential acoustic applications such as wave control, designing of meta-materials and bio-sensors.

physics.app-ph↗

arXiv2018

Gradient index phononic crystals and metamaterials

Phononic crystals and acoustic metamaterials are periodic structures whose effective properties can be tailored at will to achieve extreme control on wave propagation. Their refractive index is obtained from the homogenization of the infinite periodic system, but it is possible to locally change the properties of a finite crystal in such a way that it results in an effective gradient of the refractive index (GRIN). In such case the propagation of waves can be accurately described by means of ray theory, and different refractive devices can be designed in the framework of wave propagation in inhomogeneous media. In this paper we review the different devices that have been studied for the control of both bulk or guided acoustic waves based on graded phononic crystals.

physics.app-ph↗

arXiv2018

Interaction of Love waves with coupled cavity modes in a 2D holey phononic crystal

The interaction of Love waves with square array of pillars deposited on a cavity defined in a 2D holey phononic crystal is numerically investigated using Finite Element Method. First, the existence of SH surface modes is demonstrated separately for phononic crystals that consist of square arrayed holes, or rectangular arrayed Ni pillars, respectively in, or on, a SiO2 film deposited on a ST-cut quartz substrate. The coupling between SH modes and torsional mode in pillars induces a transmission dip that occurs at a frequency located in the range of the band-gap of the holey phononic crystal. Second, a cavity is constructed by removing lines of holes in the holey phononic crystal and results in a transmission peak that matches the dip. The optimal geometrical parameters enable us to create a coupling of the cavity mode and the localized pillar mode by introducing lines of pillars into the cavity, which significantly improved the efficiency of the cavity without increasing the crystal size. The obtained results will pave the way to implement advanced designs of high-performance electroacoustic sensors based on coupling modes in phononic crystals.

physics.app-ph↗

arXiv2018

Exploring rotational resonance in elastic metamaterial plates to realize doubly negative property

We report the realization of simultaneously negative effective mass density and shear modulus in a single-phase asymmetric double-sided pillared metamaterial. The negative effective mass density is achieved by the combination of bending and compressional resonances of one pillar whereas the rotational resonance of the other pillar leads to the negative effective shear modulus. The coupling between these two pillars is investigated to describe the formation of the doubly negative property. Then, a pillared system featuring chirality is designed in order to make efficient the excitation of the rotational vibration, the occurrence of which is demonstrated by the transmission spectrum. Finally, numerical simulations of the zero-index refraction are carried out to prove the occurrence of the doubly negative property.

physics.app-ph↗

arXiv2018

Analysis of the Robustness of Conventional and Topologically Protected Edge States in Phononic Crystal Plates

In this work we theoretically study the interface acoustic states of resonators on a thin plate with topologically protected and conventional designs. Topologically protected interface state is first analyzed by employing the conception of breaking inversion symmetry within the unit cell of a honeycomb lattice for cylindrical and spherical resonators; we further demonstrate the robustness of the wave propagation along a zig-zag path containing sharp corners, defect and disorder. The wave propagation ceases to be preserved if we increase the degree of disorder along the zig-zag path. In parallel, the conventional interface state is also designed and compared to the same situations. We found that the conventional interface state suffers back scattering in the zig-zag path while it can show a more confined wave transport in some cases. The presence of a defect along the propagation path scatters the conventional interface wave and in particular can prohibit a full propagation in presence of a localized state at the defect. If the zig-zag path is made disordered, the propagation of the conventional interface mode can be conserved at given frequencies for a low random degree and disappears for higher random degree as the interface bands become flat in dispersion and turn to localized states. Finally, we show that the immunity of the topologically protected design needs the interface to be surrounded by at least two hexagons of the phononic crystals on both sides, especially at the sharp corners in the zig-zag path, while the conventional design only needs one hexagon bulk media with the advantage of compact wave transport. This work puts a step forward for the interface states in micro-/nano-scale characterization and figures out the behaviors for both topologically protected and conventional interface states.

cond-mat.mtrl-sci↗

arXiv2016

Phonon-Plasmon Interaction in Metal-Insulator-Metal Localized Surface Plasmon Systems

We investigate theoretically and numerically the coupling between elastic and localized surface plasmon modes in a system of gold nanocylinders separated from a thin gold film by a dielectric spacer of few nanometers thickness. That system supports plasmon modes confined in between the bottom of the nanocylinder and the top of the gold film, which arise from the formation of interference patterns by short-wavelength metal-insulator-metal propagating plasmon. First we present the plasmonic properties of the system though computer-simulated extinction spectra and field maps associated to the different optical modes. Next a simple analytical model is introduced, which allows to correctly reproduce the shape and wavelengths of the plasmon modes. This model is used to investigate the efficiency of the coupling between an elastic deformation and the plasmonic modes. In the last part of the paper, we present the full numerical simulations of the phononic properties of the system, and then compute the acousto-plasmonic coupling between the different plasmon modes and five acoustic modes of very different shape. The efficiency of the coupling is assessed first by evaluating the modulation of the resonance wavelength, which allows comparison with the analytical model, and finally in term of time-modulation of the transmission spectra on the full visible range, computed for realistic values of the deformation of the nanoparticle.

physics.optics↗

arXiv2015

Resonant and Non-Local Properties of Phononic Metasolids

We derive a general theory of effective properties in metasolids based on phononic crystals with low frequency resonances. We demonstrate that in general these structures need to be described by means of a frequency-dependent and non-local anisotropic mass density, stiffness tensor and a third- rank coupling tensor, which shows that they behave like a non-local Willis medium. The effect of non-locality and coupling tensor manifest themselves for some particular resonances whereas they become negligible for other resonances. Considering the example of a two-dimensional phononic crystal, consisting of triangular arrangements of cylindrical shells in an elastic matrix, we show that its mass density tensor is strongly resonant and anisotropic presenting both positive and negative divergent values, while becoming scalar in the quasi-static limit. Moreover, it is found that the negative value of transverse component of the mass density is induced by a dipolar resonance, while that of the vertical component is induced by a monopolar one. Finally, the dispersion relation obtained by the effective parameters of the crystal is compared with the band structure, showing a good agreement for the low-wave number region, although the non-local effects are important given the existence of some resonant values of the wave number.

cond-mat.mtrl-sci↗

arXiv2015

Gradient Index Devices for the Simultaneous Focusing of the S0 and A0 Lamb Modes

Gradient index devices for the simultaneous control of the S 0 and A 0 Lamb modes are presented and numerically analysed. It is found a special relationship between the refractive indexes for these two modes which allows their simultaneous control by means of graded phononic crystals and thickness variations of the plate. A flat gradient index lens and a circular Luneburg lens are designed. Numerical simulations show that the performance of these devices is good for the two modes in a broadband frequency region, and that this approach can be used to design more advanced refractive devices for the total control of guided vibrational modes.

physics.class-ph↗

arXiv2015

Combined photonic-plasmonic modes inside photonic crystal cavities

In this article, we present a numerical study of the optical properties of a metal nanowire interacting with a localized cavity in a two dimensional photonic crystal. The nature of the modes, their wavelength and width are investigated as a function of the particle radius. It is shown in particular that a particle with diameter about the lattice constant presents very narrow resonances corresponding to hybrid photonic-plasmonic modes, where increased lifetime is attributed to the decrease of the radiative losses by interaction with the photonic crystal. These results open interesting applications in areas where narrow plasmonic resonances are required, as in LSP-resonance based biosensing.

physics.optics↗

arXiv2014

Omnidirectional refractive devices for flexural waves based on graded phononic crystals

Different omnidirectional refractive devices for flexural waves in thin plates are proposed and numerically analyzed. Their realization is explained by means phononic crystal plates, where a previously developed homogenization theory is employed for the design of graded index refractive devices. These devices consist of a circular cluster of inclusions with properly designed gradient in their radius. With this approach, the Luneburg and Maxwell lenses and a family of beam splitters for flexural waves are proposed and analyzed. Results show that these devices work properly in a broadband frequency region, being therefore an efficient approach for the design of refractive devices specially interesting for nano-scale applications.

cond-mat.mtrl-sci↗

arXiv2014

Effective Medium Theory for Elastic Metamaterials in Thin Elastic Plates

An effective medium theory for resonant and non-resonant metamaterials for flexural waves in thin plates is presented. The theory provides closed-form expressions for the effective parameters of arrangement of inclusions or resonators in thin plates as a function of the filling fraction of the inclusions, their physical properties and the frequency. It is shown that positive or negative effective elastic parameters are possible depending on the symmetry of the resonance but, unlike it happens for bulk elastic waves, the responsible for the negative mass density behaviour is the monopolar term, while the negative Young's modulus and Poisson's ratio is due to the combination of monopolar and quadrupolar resonances, showing also that, at least for the first order in the scattering coefficients, the dipolar resonance plays no role in the description of the effective medium. Several examples are given for both non-resonant and resonant effective parameters and the results are verified by multiple scattering theory.

cond-mat.mtrl-sci↗