arXiv subjects

B. Lucas

Publications and source records attributed to B. Lucas.

7 recordsLinked to original sources

arXiv2024

Technical Status Report on Plasma Components and Systems in the context of EuPRAXIA

The EuPRAXIA project aims to construct two state-of-the-art accelerator facilities based on plasma accelerator technology. Plasma-based accelerators offer the possibility of a significant reduction in facility size and cost savings over current radio frequency (RF) accelerators. The two facilities - one laser-driven one a beam-driven - are envisioned to provide electron beams with an energy in the range of 1-5 GeV and beam quality comparable to existing RF machines. This will enable a versatile portfolio of applications from compact free-electron laser (FEL) drivers to sources for medical and industrial imaging. At the heart of both facilities is the use of plasma-based accelerator components and systems which encompass not only the accelerating medium itself, but also a range of auxiliary systems such as plasma-based electron beam optics and plasma-based mirrors for high-intensity lasers. From a technical standpoint, a high-degree of control over these plasma devices will be essential for EuPRAXIA to achieve its target performance goals. The ability to diagnose and characterize these plasma devices and to simulate their operation will be further essential success factors. Additionally, compatibility with extended operation at high-repetition rates and integration into the accelerator beamline will also prove crucial. In this work, we aim to review the current status of plasma components and related systems for both laser-driven and beam-driven plasma accelerators and to assess challenges to be addressed regarding implementation at future EuPRAXIA facilities.

physics.plasm-ph↗

arXiv2024

Surrogate Models studies for laser-plasma accelerator electron source design through numerical optimisation

Designing a high-quality plasma injector electron source driven by a laser beam relies on numerical parametric studies using particle-in-cell codes. The common input parameters to explore are laser characteristics, plasma species and density profiles produced by computational fluid dynamic studies. We demonstrate the construction of surrogate models using machine learning techniques for a laser-plasma injector (LPI) based on more than $3000$ particle-in-cell simulations of laser wakefield acceleration performed for sparsely spaced input parameters published by Drobniak [Phys. Rev. Accel. Beams, 26, 091302, (2023)]. Surrogate models are relevant for LPI design and optimisation, as they are approximately $10^7$ times faster than PIC simulations. Their speed enables more efficient design studies by allowing extensive exploration of the input-output relationship without significant computational cost. We develop and compare the performance of three surrogate models, namely, multilayer perceptron (MLP), decision trees (DT) and Gaussian processes (GP). We show that using a simple and frugal MLP-based model trained on a reasonable-size random scan data set of 500 particles in cell simulations, we can predict beam parameters with a coefficient determination score $R^2=0.93$ . The best surrogate model is used to quickly find optimal working points and stability regions and get targeted electron beam energy, charge, energy spread and emittance using different methods, namely random search, Bayesian optimisation and multi-objective Bayesian optimisation. This simple approach can serve more global design study of an LPI in a start-to-end linear laser-driven accelerator.on beam energy, charge and energy spread using different methods, namely random search, Bayesian optimisation and multi-objective Bayesian optimisation

physics.plasm-ph↗

arXiv2023

Two-chamber gas target for laser-plasma accelerator electron source

Exploring new target schemes for laser wakefield accelerators is essential to meet the challenge of increasing repetition rates while ensuring stability and quality of the produced electron beams. The prototyping of a two-chamber gas cell integrated into the beam line and operating in continuous gas flow is introduced and discussed in the frame of ionisation injection. We report the numerical fluid modeling used to assist the density profile shaping. We describe the test bench used for cell prototype assessment, in particular the plasma electron density and longitudinal distribution of species relevant for ionisation injection. The lifetime of the target key part is measured for different materials. Perspectives to high power operation are outlined.

physics.acc-ph↗

arXiv2021

Calibration of the scintillation of cerium-doped yttrium aluminum garnet crystals irradiated by monoenergetic 4 MeV energy electrons

This paper presents the results of measurements of fluorescing cerium-doped yttrium aluminum garnet crystals after being irradiated by an accelerated electron beam with energy of around 4 MeV. The measurements were performed using the PHIL linear accelerator at LAL (France). We observe linear dependence of the crystal emission to the electron beam charge and the isotropy of the photon emission. We provide the calibration coefficients of the photon emission depending on the charge of the accelerated electron beam for two crystals originating from two different manufacturers.

physics.ins-det↗

arXiv2018

Modelling of laser-plasma acceleration of relativistic electrons in the frame of ESCULAP project

We present numerical simulations results on the injection and acceleration of a 10 MeV, 10 pC electrons beam in a plasma wave generated in a gas cell by a 2J, 45 fs laser beam. This modeling is related to the ESCULAP project in which the electrons accelerated by the PHIL photo-injector is injected in a gas cell irradiated by the laser beam of the LASERIX system. Extensive modeling of the experiment was performed in order to determine optimal parameters of the laser plasma configurations. This was done with the newly developed numerical code WakeTraj . We propose a configuration that benefits of a highly compressed electron bunch and for which the injected electron beam can be efficiently coupled to the plasma wave and accelerated up to 140 MeV, with an energy spread lower than 5%.

physics.acc-ph↗

arXiv2017

Longitudinal compression and transverse matching of electron bunch for external injection LPWA at ESCULAP

We present theoretical and numerical studies of longitudinal compression and transverse matching of electron bunch before injecting into the Laser-plasma Wake Field Accelerator (LWFA) foreseen at the ESCULAP project in ORSAY. Longitudinal compression is performed with a dogleg chicane, the chicane is designed based on theory of beam optics, beam dynamics in dogleg is studied with ImpactT and cross checked with CSRtrack, both 3D space charge (SC) and coherent synchrotron radiation (CSR) effects are included. Simulation results show that the energy chirp at the dogleg entrance should be smaller than the nominal optic design value, in order to compensate the negative energy chirp increase caused by longitudinal SC, while CSR can be ignored in our case. With an optimized configuration, the electron bunch ($\sim$10MeV, 10pC) is compressed from 0.9ps RMS to 70fs RMS (53fs FWHM), with a peak current of 152A. Transverse matching is realized with a doublet and a triplet, they are matched with Madx and the electron bunch is tracked with ImpactT, simulation results show little difference with the nominal design values, that is due to the SC effect. Finally, by simply adjusting the quadrupole strength, a preliminary optimized configuration has been achieved, that matches the Courant-Snyder (C-S) parameters to $α_{x}=0.01$,$α_{y}=-0.02$, $β_{x}=0.014$m,$β_{y}=0.012$m at the plasma entrance.

physics.acc-ph↗

arXiv2008

Fragmentation branching ratios of highly excited hydrocarbon molecules CnH and their cations CnH+ (n<4)

We have measured fragmentation branching ratios of neutral CnH and CnH+ cations produced in high velocity (4.5 a.u) collisions between incident CnH+ cations and helium atoms. Electron capture gives rise to excited neutral species CnH and electronic excitation to excited cations CnH+. Thanks to a dedicated set-up, based on coincident detection of all fragments, the dissociation of the neutral and cationic parents were recorded separately and in a complete way. For the fragmentation of CnH, the H-loss channel is found to be dominant, as already observed by other authors. By contrast, the H-loss and C-loss channels equally dominate the two-fragment break up of CnH+ species. For these cations, we provide the first fragmentation data (n > 2). Results are also discussed in the context of astrochemistry.

astro-ph↗