arXiv subjects

B. Inhester

Publications and source records attributed to B. Inhester.

At least 19 recordsLinked to original sources

arXiv2025

Observing the solar corona from a formation-flying mission. First results of Proba-3/ASPIICS

We report the first results from observations of the solar corona by the ASPIICS coronagraph aboard the Proba-3 mission. ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun) is a giant coronagraph consisting of the telescope mounted aboard one of the mission's spacecraft and the external occulter placed on the second spacecraft. The two spacecraft separated by around 144 m fly in a precise formation up to 5.5 hours at a time, which allows coronal observations in eclipse-like conditions, i.e. close to the limb (typically down to 1.099 Rs, occasionally down to 1.05 Rs) and with very low straylight. ASPIICS observes quasi-stationary structures, such as coronal loops, streamers, quiescent prominences, and a variety of dynamic phenomena: erupting prominences, coronal mass ejections, jets, slow solar wind outflows, coronal inflows. In particular, weak, widespread and persistent small-scale outflows and inflows between 1.3 and 3 Rs are observed at a high spatial (5.6 arcsec) and temporal (30 s) resolution for the first time, expanding the range of scales at which the variable slow solar wind is observed to form.

astro-ph.SR↗

arXiv2025

Height-dependent thermal properties of extreme-ultraviolet campfires in the quiet Sun

Small-scale impulsive energy-release events are widely considered a key ingredient of quiet-Sun coronal heating. We quantified the thermal-energy content of extreme-ultraviolet (EUV) campfires, examined their impulsive heating characteristics, and investigated how their properties vary with atmospheric height. We analysed 1,468 campfires from an observing sequence on 30 May 2020 with Solar Orbiter/EUI HRIEUV at 174 A. Temperatures and emission measures were adopted from SDO/AIA diagnostics, and geometric uncertainties were explored using multiple volume models. Statistical properties were characterised using cumulative distribution functions and maximum-likelihood techniques and compared with Solar Orbiter/STIX microflares and SDO/AIA nanoflare-like events. Campfire durations show a clear dependence on height: short-duration events occur at all heights, whereas longer-lived brightenings are preferentially associated with chromospheric layers. Emitting volumes and thermal energies, by contrast, show no comparable height dependence. Background-subtracted thermal energies span approximately 10^20-10^24 erg, with rare events reaching approximately 5 x 10^24 erg. The statistically robust power-law regime extends over approximately 10^22-10^24 erg. Directly detected campfires contribute a sub-percent fraction of the canonical quiet-Sun heating requirement; approximate corrections for the detection threshold and DEM completeness could raise this contribution to a value of order a few percent. EUV campfires extend the flare energy distribution towards lower energies and provide height-resolved constraints on impulsive heating in the quiet Sun. The height dependence of event durations, combined with broadly invariant energy and volume distributions, indicates that atmospheric stratification primarily modulates cooling and dissipation timescales rather than the characteristic energy scale.

astro-ph.SR↗

arXiv2025

The ASPIICS solar coronagraph aboard the Proba-3 formation flying mission. Scientific objectives and instrument design

We describe the scientific objectives and instrument design of the ASPIICS coronagraph launched aboard the Proba-3 mission of the European Space Agency (ESA) on 5 December 2024. Proba-3 consists of two spacecraft in a highly elliptical orbit around the Earth. One spacecraft carries the telescope, and the external occulter is mounted on the second spacecraft. The two spacecraft fly in a precise formation during 6 hours out of 19.63 hour orbit, together forming a giant solar coronagraph called ASPIICS (Association of Spacecraft for Polarimetric and Imaging Investigation of the Corona of the Sun). Very long distance between the external occulter and the telescope (around 144 m) represents an increase of two orders of magnitude compared to classical externally occulted solar coronagraphs. This allows us to observe the inner corona in eclipse-like conditions, i.e. close to the solar limb (down to 1.099 Rs) and with very low straylight. ASPIICS will provide a new perspective on the inner solar corona that will help solve several outstanding problems in solar physics, such as the origin of the slow solar wind and physical mechanism of coronal mass ejections.

astro-ph.SR↗

arXiv2022

Coronal magnetic field evolution over the cycle 24

The photospheric magnetic field vector is continuously derived from measurements, while reconstruction of the three-dimensional (3D) coronal magnetic field requires modelling with photospheric measurements as a boundary condition. For decades the cycle variation of the magnetic field in the photosphere has been investigated. To present, there is no study to show the evolution of the coronal magnetic flux in the corona, nor the evolution of solar cycle magnetic free energy. The paper aims to analyze the temporal variation of the magnetic field and free magnetic energy in the solar corona for the solar cycle 24 and how the magnetic field behaves in the two hemispheres. We investigate if we can obtain better estimates of the magnetic field at Earth using the nonlinear force-free field (NLFFF) extrapolation method. To model the magnetic field over cycle 24 we apply the NLFFF optimization method to the synoptic vector magnetic maps derived from the observations of Heliospheric and Magnetic Imager (HMI) onboard Solar Dynamic Observatory (SDO). We found that during the solar cycle 24, the maximum of the Sun's dynamics is different from the sunspot number (SSN) maximum peak. The major contribution to the total unsigned flux is provided by the flux coming from the magnetic field structures other than sunspots (MSOS) within latitudes between -30 and +30 degrees. The magnetic flux variation during the solar cycle 24 shows a different evolution in the corona than in the photosphere. We found a correlation value of 0.8 between the derived magnetic energy from our model and the flare energy index derived from observations. On average, cycle 24 had a higher number of sunspots in the northern hemisphere (NH) but stronger flux in the southern hemisphere (SH) which could more effectively reach the higher layers of the atmosphere. The coupling between the hemispheres increases with height.

astro-ph.SR↗

arXiv2021

Stereoscopy of extreme UV quiet Sun brightenings observed by Solar Orbiter/EUI

The 3D fine structure of the solar atmosphere is still not fully understood as most of the available observations are taken from a single vantage point. The goal of the paper is to study the 3D distribution of small-scale brightening events ("campfires") discovered in the EUV quiet Sun by the Extreme Ultraviolet Imager (EUI) aboard Solar Orbiter. We used a first commissioning data set acquired by the EUI's High Resolution EUV telescope on 30 May 2020 in the 174 {\AA} passband and we combined it with simultaneous data taken by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory in a similar 171 {\AA} passband. The two-pixel spatial resolution of the two telescopes is 400 km and 880 km, respectively, which is sufficient to identify the campfires in both data sets. The two spacecraft had an angular separation of around 31.5 degrees (essentially in heliographic longitude), which allowed for the 3D reconstruction of the campfire position. These observations represent the first time that stereoscopy was achieved for brightenings at such a small scale. Manual and automatic triangulation methods were used to characterize the campfire data. The height of the campfires is located between 1000 km and 5000 km above the photosphere and we find a good agreement between the manual and automatic methods. The internal structure of campfires is mostly unresolved by AIA; however, for a particularly large campfire, we were able to triangulate a few pixels, which are all in a narrow range between 2500 and 4500 km. The low height of EUI campfires suggests that they belong to the previously unresolved fine structure of the transition region and low corona of the quiet Sun. They are probably apexes of small-scale dynamic loops heated internally to coronal temperatures. This work demonstrates that high-resolution stereoscopy of structures in the solar atmosphere has become feasible.

astro-ph.SR↗

arXiv2021

Extreme UV quiet Sun brightenings observed by Solar Orbiter/EUI

The goal of this paper is to study the smallest brightening events observed in the EUV quiet Sun. We use commissioning data taken by the EUI instrument onboard the recently launched Solar Orbiter mission. On 2020 May 30, EUI was situated at 0.556AU from the Sun. Its HRIEUV telescope 17.4nm passband reached an exceptionally high two-pixel spatial resolution of 400km. The size and duration of small-scale structures is determined in the HRIEUV data, while their height is estimated from triangulation with the simultaneous SDO/AIA data. This is the first stereoscopy of small scale brightenings at high resolution. We observed small localised brightenings ("campfires") in a quiet Sun region with lengthscales between 400km and 4000km and durations between 10 and 200s. The smallest and weakest of these HRIEUV brightenings have not been observed before. Simultaneous HRILYA observations do not show localised brightening events, but the locations of the HRIEUV events correspond clearly to the chromospheric network. Comparison with simultaneous AIA images shows that most events can also be identified in the 17.1nm, 19.3nm, 21.1nm, and 30.4nm passbands of AIA, although they appear weaker and blurred. DEM analysis indicates coronal temperatures peaking at log(T)~6.1-6.15. We determined the height of a few campfires, which is between 1000 and 5000km above the photosphere. We conclude that "campfires" are mostly coronal in nature and are rooted in the magnetic flux concentrations of the chromospheric network. We interpret these events as a new extension to the flare/microflare/nanoflare family. Given their low height, the EUI "campfires" could be a new element of the fine structure of the transition region/low corona: apexes of small-scale loops that are internally heated to coronal temperatures.

astro-ph.SR↗

arXiv2020

Initiation and Early Kinematic Evolution of Solar Eruptions

We investigate the initiation and early evolution of 12 solar eruptions, including six active region hot channel and six quiescent filament eruptions, which were well observed by the \textsl{Solar Dynamics Observatory}, as well as by the \textsl{Solar TErrestrial RElations Observatory} for the latter. The sample includes one failed eruption and 11 coronal mass ejections, with velocities ranging from 493 to 2140~km~s$^{-1}$. A detailed analysis of the eruption kinematics yields the following main results. (1) The early evolution of all events consists of a slow-rise phase followed by a main-acceleration phase, the height-time profiles of which differ markedly and can be best fit, respectively, by a linear and an exponential function. This indicates that different physical processes dominate in these phases, which is at variance with models that involve a single process. (2) The kinematic evolution of the eruptions tends to be synchronized with the flare light curve in both phases. The synchronization is often but not always close. A delayed onset of the impulsive flare phase is found in the majority of the filament eruptions (5 out of 6). This delay, and its trend to be larger for slower eruptions, favor ideal MHD instability models. (3) The average decay index at the onset heights of the main acceleration is close to the threshold of the torus instability for both groups of events (although based on a tentative coronal field model for the hot channels), suggesting that this instability initiates and possibly drives the main acceleration.

astro-ph.SR↗

arXiv2014

SDO/AIA Observations of a Reflecting Longitudinal Wave in a Coronal Loop

We report high resolution observations from the SDO/AIA of intensity oscillations in a hot, T~8-10 MK, loop. The AIA images show a large coronal loop that was rapidly heated following plasma ejection from one of the loop's footpoints. A wave-like intensity enhancement, seen very clearly in the 131 and 94 \AA\ channel images, propagated ahead of the ejecta along the loop, and was reflected at the opposite footpoint. The wave reflected four times before fading. It was only seen in the hot, 131 and 94 \AA\ channels. The characteristic period and the decay time of the oscillation was $\sim$630 and $\sim$440 s, respectively. The phase speed was about 460-510 km/s which roughly matches the sound speed of the loop (430-480 km/s). The observed properties of the oscillation are consistent with the observations of Doppler shift oscillations discovered by the SOHO/SUMER and with their interpretation as slow magnetoacoustic waves. We suggest that the impulsive injection of plasma, following reconnection at one of the loop footpoints, led to rapid heating and the propagation of a longitudinal compressive wave along the loop. The wave bounces back and forth a couple of times before fading.

astro-ph.SR↗

arXiv2012

A Comparison Between Nonlinear Force-Free Field and Potential Field Models Using Full-Disk SDO/HMI Magnetogram

Measurements of magnetic fields and electric currents in the pre-eruptive corona are crucial to study solar eruptive phenomena, like flare and coronal mass ejections(CMEs). However, spectro-polarimetric measurements of certain photospheric lines permit a determination of the vector magnetic field at the photosphere. Thus, substantial collection of magnetograms relate to the photospheric surface field only. Numerical modeling is carried out by applying state-of-the-art nonlinear force-free field (NLFFF) reconstruction. Cartesian nonlinear force-free field (NLFFF) codes are not well suited for larger domains, since the spherical nature of the solar surface cannot be neglected when the field of view is large. One of the most significant results of Solar Dynamic Observatory (SDO) mission to date has been repeated observations of large, almost global scale events in which large scale connection between active regions may play fundamental role. Therefore, it appears prudent to implement a NLFFF procedure in spherical geometry for use when large scale boundary data are available, such as from the Helioseismic and Magnetic Imager (HMI) on board SDO. In this work, we model the coronal magnetic field above multiple active regions with the help of a potential field and a NLFFF extrapolation codes in a full-disk using HMI data as a boundary conditions. We compare projections of the resulting magnetic field lines solutions with full-disk coronal images from the Atmospheric Imaging Assembly (SDO/AIA) for both models. This study has found that the NLFFF model reconstructs the magnetic configuration better than the potential field model. We have concluded that much of trans-equatorial loops connecting the two solar hemispheres are current-free.

astro-ph.SR↗

arXiv2012

Full-disk nonlinear force-free field extrapolation of SDO/HMI and SOLIS/VSM magnetograms

Extrapolation codes in Cartesian geometry for modelling the magnetic field in the corona do not take the curvature of the Sun's surface into account and can only be applied to relatively small areas, e.g., a single active region. We compare the analysis of the photospheric magnetic field and subsequent force-free modeling based on full-disk vector maps from Helioseismic and Magnetic Imager (HMI) on board solar dynamics observatory (SDO) and Vector Spectromagnetograph (VSM) of the Synoptic Optical Long-term Investigations of the Sun (SOLIS). We use Helioseismic and Magnetic Imager and Vector Spectromagnetograph photospheric magnetic field measurements to model the force-free coronal field above multiple solar active regions, assuming magnetic forces to dominate. We solve the nonlinear force-free field equations by minimizing a functional in spherical coordinates over a full disk excluding the poles. After searching for the optimum modeling parameters for the particular data sets, we compare the resulting nonlinear force-free model fields. We compare quantities like the total magnetic energy content and free magnetic energy, the longitudinal distribution of the magnetic pressure and surface electric current density using our spherical geometry extrapolation code. The magnetic field lines obtained from nonlinear force-free extrapolation based on Helioseismic and Magnetic Imager and Vector Spectromagnetograph data have good agreement. However, the nonlinear force-free extrapolation based on Helioseismic and Magnetic Imager data have more contents of total magnetic energy, free magnetic energy, the longitudinal distribution of the magnetic pressure and surface electric current density compared to the one from Vector Spectromagnetograph data.

astro-ph.SR↗

arXiv2012

Study of a Prominence Eruption using PROBA2/SWAP and STEREO/EUVI Data

Observations of the early rise and propagation phases of solar eruptive prominences can provide clues about the forces acting on them through the behavior of their acceleration with height. We have analyzed such an event, observed on 13 April 2010 by SWAP on PROBA2 and EUVI on STEREO. A feature at the top of the erupting prominence was identified and tracked in images from the three spacecraft. The triangulation technique was used to derive the true direction of propagation of this feature. The reconstructed points were fitted with two mathematical models: i) a power-law polynomial function and ii) a cubic smoothing spline, in order to derive the accelerations. The first model is characterized by five degrees of freedom while the second one is characterized by ten degrees of freedom. The results show that the acceleration increases smoothly and it is continuously increasing with height. We conclude that the prominence is not accelerated immediately by local reconnection but rather is swept away as part of a large-scale relaxation of the coronal magnetic field.

astro-ph.SR↗

arXiv2012

Morphological evolution of a 3D CME cloud reconstructed from three viewpoints

The propagation properties of coronal mass ejections (CMEs) are crucial to predict its geomagnetic effect. A newly developed three dimensional (3D) mask fitting reconstruction method using coronagraph images from three viewpoints has been described and applied to the CME ejected on August 7, 2010. The CME's 3D localisation, real shape and morphological evolution are presented. Due to its interaction with the ambient solar wind, the morphology of this CME changed significantly in the early phase of evolution. Two hours after its initiation, it was expanding almost self-similarly. CME's 3D localisation is quite helpful to link remote sensing observations to in situ measurements. The investigated CME was propagating to Venus with its flank just touching STEREO B. Its corresponding ICME in the interplanetary space shows a possible signature of a magnetic cloud with a preceding shock in VEX observations, while from STEREO B only a shock is observed. We have calculated three principle axes for the reconstructed 3D CME cloud. The orientation of the major axis is in general consistent with the orientation of a filament (polarity inversion line) observed by SDO/AIA and SDO/HMI. The flux rope axis derived by the MVA analysis from VEX indicates a radial-directed axis orientation. It might be that locally only the leg of the flux rope passed through VEX. The height and speed profiles from the Sun to Venus are obtained. We find that the CME speed possibly had been adjusted to the speed of the ambient solar wind flow after leaving COR2 field of view and before arriving Venus. A southward deflection of the CME from the source region is found from the trajectory of the CME geometric center. We attribute it to the influence of the coronal hole where the fast solar wind emanated from.

astro-ph.SR↗

arXiv2012

Break up of returning plasma after the 7 June 2011 filament eruption by Rayleigh-Taylor instabilities

A prominence eruption on 7 June 2011 produced spectacular curtains of plasma falling through the lower corona. At the solar surface they created an incredible display of extreme ultraviolet brightenings. The aim is to identify and analyze some of the local instabilities which produce structure in the falling plasma. The structures were investigated using SDO/AIA 171A and 193A images in which the falling plasma appeared dark against the bright coronal emission. Several instances of the Rayleigh-Taylor instability were investigated. In two cases the Alfven velocity associated with the dense plasma could be estimated from the separation of the Rayleigh-Taylor fingers. A second type of feature, which has the appearance of self-similar branching horns, is also discussed.

astro-ph.SR↗

arXiv2012

How to optimize nonlinear force-free coronal magnetic field extrapolations from SDO/HMI vector magnetograms?

The SDO/HMI instruments provide photospheric vector magnetograms with a high spatial and temporal resolution. Our intention is to model the coronal magnetic field above active regions with the help of a nonlinear force-free extrapolation code. Our code is based on an optimization principle and has been tested extensively with semi-analytic and numeric equilibria and been applied before to vector magnetograms from Hinode and ground based observations. Recently we implemented a new version which takes measurement errors in photospheric vector magnetograms into account. Photospheric field measurements are often due to measurement errors and finite nonmagnetic forces inconsistent as a boundary for a force-free field in the corona. In order to deal with these uncertainties, we developed two improvements: 1.) Preprocessing of the surface measurements in order to make them compatible with a force-free field 2.) The new code keeps a balance between the force-free constraint and deviation from the photospheric field measurements. Both methods contain free parameters, which have to be optimized for use with data from SDO/HMI. Within this work we describe the corresponding analysis method and evaluate the force-free equilibria by means of how well force-freeness and solenoidal conditions are fulfilled, the angle between magnetic field and electric current and by comparing projections of magnetic field lines with coronal images from SDO/AIA. We also compute the available free magnetic energy and discuss the potential influence of control parameters.

astro-ph.SR↗

arXiv2011

Particle kinetic analysis of a polar jet from SECCHI COR data

Aims. We analyze coronagraph observations of a polar jet observed by the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) instrument suite onboard the Solar TErrestrial RElations Observatory (STEREO) spacecraft. Methods. In our analysis we compare the brightness distribution of the jet in white-light coronagraph images with a dedicated kinetic particle model. We obtain a consistent estimate of the time that the jet was launched from the solar surface and an approximate initial velocity distribution in the jet source. The method also allows us to check the consistency of the kinetic model. In this first application, we consider only gravity as the dominant force on the jet particles along the magnetic field. Results. We find that the kinetic model explains the observed brightness evolution well. The derived initiation time is consistent with the jet observations by the EUVI telescope at various wavelengths. The initial particle velocity distribution is fitted by Maxwellian distributions and we find deviations of the high energy tail from the Maxwellian distributions. We estimate the jet's total electron content to have a mass between 3.2 \times 1014 and 1.8 \times 1015 g. Mapping the integrated particle number along the jet trajectory to its source region and assuming a typical source region size, we obtain an initial electron density between 8 \times 109 and 5 \times 1010 cm-3 that is characteristic for the lower corona or the upper chromosphere. The total kinetic energy of all particles in the jet source region amounts from 2.1 \times 1028 to 2.4 \times 1029 erg.

astro-ph.SR↗

arXiv2011

Coronal Magnetic Field Structure and Evolution for Flaring AR 11117 and its Surroundings

In this study, photospheric vector magnetograms obtained with the Synoptic Optical Long-term Investigations of the Sun survey (SOLIS), are used as boundary conditions to model the three-dimensional nonlinear force-free (NLFF) coronal magnetic fields as a sequence of nonlinear force-free equilibria in spherical geometry. We study the coronal magnetic field structure inside active regions and its temporal evolution. We compare the magnetic field configuration obtained from NLFF extrapolation before and after flaring event in active region (AR) 11117 and its surroundings observed on 27 October 2010. We compare the magnetic field topologies and the magnetic energy densities and study the connectivities between AR 11117 and its surroundings. During the investigated time period, we estimate the change in free magnetic energy from before to after the flare to be 1.74x10^{32}erg which represents about 13.5% of nonlinear force-free magnetic energy before the flare. In this study, we find that electric currents from AR 11117 to its surroundings were disrupted after the flare.

astro-ph.SR↗

arXiv2011

Solar magnetism eXplorer (SolmeX)

The magnetic field plays a pivotal role in many fields of Astrophysics. This is especially true for the physics of the solar atmosphere. Measuring the magnetic field in the upper solar atmosphere is crucial to understand the nature of the underlying physical processes that drive the violent dynamics of the solar corona -- that can also affect life on Earth. SolmeX, a fully equipped solar space observatory for remote-sensing observations, will provide the first comprehensive measurements of the strength and direction of the magnetic field in the upper solar atmosphere. The mission consists of two spacecraft, one carrying the instruments, and another one in formation flight at a distance of about 200m carrying the occulter to provide an artificial total solar eclipse. This will ensure high-quality coronagraphic observations above the solar limb. Solmex integrates two spectro-polarimetric coronagraphs for off-limb observations, one in the EUV and one in the IR, and three instruments for observations on the disk. The latter comprises one imaging polarimeter in the EUV for coronal studies, a spectro-polarimeter in the EUV to investigate the low corona, and an imaging spectro-polarimeter in the UV for chromospheric studies. SOHO and other existing missions have investigated the emission of the upper atmosphere in detail (not considering polarization), and as this will be the case also for missions planned for the near future. Therefore it is timely that SolmeX provides the final piece of the observational quest by measuring the magnetic field in the upper atmosphere through polarimetric observations.

astro-ph.SR↗

arXiv2011

Low polarized emission from the core of coronal mass ejections

In white-light coronagraph images, cool prominence material is sometimes observed as bright patches in the core of coronal mass ejections (CMEs). If, as generally assumed, this emission is caused by Thomson-scattered light from the solar surface, it should be strongly polarised tangentially to the solar limb. However, the observations of a CME made with the SECCHI/STEREO coronagraphs on 31 August 2007 show that the emission from these bright core patches is exceptionally low polarised. We used the polarisation ratio method of Moran and Davila (2004) to localise the barycentre of the CME cloud. By analysing the data from both STEREO spacecraft we could resolve the plane-of-the-sky ambiguity this method usually suffers from. Stereoscopic triangulation was used to independently localise the low-polarisation patch relative to the cloud. We demonstrated for the first time that the bright core material is located close to the centre of the CME cloud. We show that the major part of the CME core emission, more than 85% in our case, is H$α$ radiation and only a small fraction is Thomson-scattered light. Recent calculations also imply that the plasma density in the patch is 8 10$^8$ cm$^{-3}$ or more compared to 2.6 10$^6$ cm$^{-3}$ for the Thomson-scattering CME environment surrounding the core material.

astro-ph.SR↗